267 lines
7.3 KiB
YAML
267 lines
7.3 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/fsl,fec.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Freescale Fast Ethernet Controller (FEC)
|
|
|
|
maintainers:
|
|
- Shawn Guo <shawnguo@kernel.org>
|
|
- Wei Fang <wei.fang@nxp.com>
|
|
- NXP Linux Team <linux-imx@nxp.com>
|
|
|
|
allOf:
|
|
- $ref: ethernet-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- fsl,imx25-fec
|
|
- fsl,imx27-fec
|
|
- fsl,imx28-fec
|
|
- fsl,imx6q-fec
|
|
- fsl,mvf600-fec
|
|
- fsl,s32v234-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx53-fec
|
|
- fsl,imx6sl-fec
|
|
- const: fsl,imx25-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx35-fec
|
|
- fsl,imx51-fec
|
|
- const: fsl,imx27-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx6ul-fec
|
|
- fsl,imx6sx-fec
|
|
- const: fsl,imx6q-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx7d-fec
|
|
- const: fsl,imx6sx-fec
|
|
- items:
|
|
- const: fsl,imx8mq-fec
|
|
- const: fsl,imx6sx-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx8mm-fec
|
|
- fsl,imx8mn-fec
|
|
- fsl,imx8mp-fec
|
|
- fsl,imx93-fec
|
|
- const: fsl,imx8mq-fec
|
|
- const: fsl,imx6sx-fec
|
|
- items:
|
|
- const: fsl,imx8qm-fec
|
|
- const: fsl,imx6sx-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx8qxp-fec
|
|
- const: fsl,imx8qm-fec
|
|
- const: fsl,imx6sx-fec
|
|
- items:
|
|
- enum:
|
|
- fsl,imx8ulp-fec
|
|
- const: fsl,imx6ul-fec
|
|
- const: fsl,imx6q-fec
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
interrupt-names:
|
|
oneOf:
|
|
- items:
|
|
- const: int0
|
|
- items:
|
|
- const: int0
|
|
- const: pps
|
|
- items:
|
|
- const: int0
|
|
- const: int1
|
|
- const: int2
|
|
- items:
|
|
- const: int0
|
|
- const: int1
|
|
- const: int2
|
|
- const: pps
|
|
|
|
clocks:
|
|
minItems: 2
|
|
maxItems: 5
|
|
description:
|
|
The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
|
|
The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
|
|
The "ptp"(option), for IEEE1588 timer clock that requires the clock.
|
|
The "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
|
|
RGMII TXC clock or RMII reference clock. It depends on board design,
|
|
the clock is required if RGMII TXC and RMII reference clock source from
|
|
SOC internal PLL.
|
|
The "enet_out"(option), output clock for external device, like supply clock
|
|
for PHY. The clock is required if PHY clock source from SOC.
|
|
The "enet_2x_txclk"(option), for RGMII sampling clock which fixed at 250Mhz.
|
|
The clock is required if SoC RGMII enable clock delay.
|
|
|
|
clock-names:
|
|
minItems: 2
|
|
maxItems: 5
|
|
items:
|
|
enum:
|
|
- ipg
|
|
- ahb
|
|
- ptp
|
|
- enet_clk_ref
|
|
- enet_out
|
|
- enet_2x_txclk
|
|
|
|
phy-mode: true
|
|
|
|
phy-handle: true
|
|
|
|
fixed-link: true
|
|
|
|
local-mac-address: true
|
|
|
|
mac-address: true
|
|
|
|
nvmem-cells: true
|
|
|
|
nvmem-cell-names: true
|
|
|
|
tx-internal-delay-ps:
|
|
enum: [0, 2000]
|
|
|
|
rx-internal-delay-ps:
|
|
enum: [0, 2000]
|
|
|
|
phy-supply:
|
|
description:
|
|
Regulator that powers the Ethernet PHY.
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
fsl,num-tx-queues:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
The property is valid for enet-avb IP, which supports hw multi queues.
|
|
Should specify the tx queue number, otherwise set tx queue number to 1.
|
|
enum: [1, 2, 3]
|
|
|
|
fsl,num-rx-queues:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
The property is valid for enet-avb IP, which supports hw multi queues.
|
|
Should specify the rx queue number, otherwise set rx queue number to 1.
|
|
enum: [1, 2, 3]
|
|
|
|
fsl,magic-packet:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If present, indicates that the hardware supports waking up via magic packet.
|
|
|
|
fsl,err006687-workaround-present:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If present indicates that the system has the hardware workaround for
|
|
ERR006687 applied and does not need a software workaround.
|
|
|
|
fsl,stop-mode:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
items:
|
|
- items:
|
|
- description: phandle to general purpose register node
|
|
- description: the gpr register offset for ENET stop request
|
|
- description: the gpr bit offset for ENET stop request
|
|
description:
|
|
Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
|
|
|
|
mdio:
|
|
$ref: mdio.yaml#
|
|
unevaluatedProperties: false
|
|
description:
|
|
Specifies the mdio bus in the FEC, used as a container for phy nodes.
|
|
|
|
# Deprecated optional properties:
|
|
# To avoid these, create a phy node according to ethernet-phy.yaml in the same
|
|
# directory, and point the FEC's "phy-handle" property to it. Then use
|
|
# the phy's reset binding, again described by ethernet-phy.yaml.
|
|
|
|
phy-reset-gpios:
|
|
deprecated: true
|
|
description:
|
|
Should specify the gpio for phy reset.
|
|
|
|
phy-reset-duration:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
deprecated: true
|
|
description:
|
|
Reset duration in milliseconds. Should present only if property
|
|
"phy-reset-gpios" is available. Missing the property will have the
|
|
duration be 1 millisecond. Numbers greater than 1000 are invalid
|
|
and 1 millisecond will be used instead.
|
|
|
|
phy-reset-active-high:
|
|
type: boolean
|
|
deprecated: true
|
|
description:
|
|
If present then the reset sequence using the GPIO specified in the
|
|
"phy-reset-gpios" property is reversed (H=reset state, L=operation state).
|
|
|
|
phy-reset-post-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
deprecated: true
|
|
description:
|
|
Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
|
|
milliseconds will be observed after the phy-reset-gpios has been toggled.
|
|
Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
|
|
Other delays are invalid.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
# FIXME: We had better set additionalProperties to false to avoid invalid or at
|
|
# least undocumented properties. However, PHY may have a deprecated option to
|
|
# place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
|
|
# these boards which is based on i.MX6QDL.
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
ethernet@83fec000 {
|
|
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
|
|
reg = <0x83fec000 0x4000>;
|
|
interrupts = <87>;
|
|
phy-mode = "mii";
|
|
phy-reset-gpios = <&gpio2 14 0>;
|
|
phy-supply = <®_fec_supply>;
|
|
};
|
|
|
|
ethernet@83fed000 {
|
|
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
|
|
reg = <0x83fed000 0x4000>;
|
|
interrupts = <87>;
|
|
phy-mode = "mii";
|
|
phy-reset-gpios = <&gpio2 14 0>;
|
|
phy-supply = <®_fec_supply>;
|
|
phy-handle = <ðphy0>;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|