213 lines
5.6 KiB
YAML
213 lines
5.6 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Microchip Sparx5 Ethernet switch controller
|
|
|
|
maintainers:
|
|
- Steen Hegelund <steen.hegelund@microchip.com>
|
|
- Lars Povlsen <lars.povlsen@microchip.com>
|
|
|
|
description: |
|
|
The SparX-5 Enterprise Ethernet switch family provides a rich set of
|
|
Enterprise switching features such as advanced TCAM-based VLAN and
|
|
QoS processing enabling delivery of differentiated services, and
|
|
security through TCAM-based frame processing using versatile content
|
|
aware processor (VCAP).
|
|
|
|
IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
|
|
with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
|
|
IPv6 (S,G) multicast groups.
|
|
|
|
L3 security features include source guard and reverse path
|
|
forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
|
|
IP tunnels (IP over GRE/IP).
|
|
|
|
The SparX-5 switch family targets managed Layer 2 and Layer 3
|
|
equipment in SMB, SME, and Enterprise where high port count
|
|
1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^switch@[0-9a-f]+$"
|
|
|
|
compatible:
|
|
const: microchip,sparx5-switch
|
|
|
|
reg:
|
|
items:
|
|
- description: cpu target
|
|
- description: devices target
|
|
- description: general control block target
|
|
|
|
reg-names:
|
|
items:
|
|
- const: cpu
|
|
- const: devices
|
|
- const: gcb
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: register based extraction
|
|
- description: frame dma based extraction
|
|
- description: ptp interrupt
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
items:
|
|
- const: xtr
|
|
- const: fdma
|
|
- const: ptp
|
|
|
|
resets:
|
|
items:
|
|
- description: Reset controller used for switch core reset (soft reset)
|
|
|
|
reset-names:
|
|
items:
|
|
- const: switch
|
|
|
|
mac-address: true
|
|
|
|
ethernet-ports:
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
'#address-cells':
|
|
const: 1
|
|
'#size-cells':
|
|
const: 0
|
|
|
|
patternProperties:
|
|
"^port@[0-9a-f]+$":
|
|
$ref: /schemas/net/ethernet-controller.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
reg:
|
|
description: Switch port number
|
|
|
|
phys:
|
|
maxItems: 1
|
|
description:
|
|
phandle of a Ethernet SerDes PHY. This defines which SerDes
|
|
instance will handle the Ethernet traffic.
|
|
|
|
microchip,bandwidth:
|
|
description: Specifies bandwidth in Mbit/s allocated to the port.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 25000
|
|
|
|
microchip,sd-sgpio:
|
|
description:
|
|
Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
|
|
This is optional, and only needed if the default used index is
|
|
is not correct.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 383
|
|
|
|
required:
|
|
- reg
|
|
- phys
|
|
- phy-mode
|
|
- microchip,bandwidth
|
|
|
|
oneOf:
|
|
- required:
|
|
- phy-handle
|
|
- required:
|
|
- sfp
|
|
- managed
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- interrupts
|
|
- interrupt-names
|
|
- ethernet-ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
switch: switch@600000000 {
|
|
compatible = "microchip,sparx5-switch";
|
|
reg = <0 0x401000>,
|
|
<0x10004000 0x7fc000>,
|
|
<0x11010000 0xaf0000>;
|
|
reg-names = "cpu", "devices", "gcb";
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "xtr";
|
|
resets = <&reset 0>;
|
|
reset-names = "switch";
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port0: port@0 {
|
|
reg = <0>;
|
|
microchip,bandwidth = <1000>;
|
|
phys = <&serdes 13>;
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "qsgmii";
|
|
};
|
|
/* ... */
|
|
/* Then the 25G interfaces */
|
|
port60: port@60 {
|
|
reg = <60>;
|
|
microchip,bandwidth = <25000>;
|
|
phys = <&serdes 29>;
|
|
phy-mode = "10gbase-r";
|
|
sfp = <&sfp_eth60>;
|
|
managed = "in-band-status";
|
|
microchip,sd-sgpio = <365>;
|
|
};
|
|
port61: port@61 {
|
|
reg = <61>;
|
|
microchip,bandwidth = <25000>;
|
|
phys = <&serdes 30>;
|
|
phy-mode = "10gbase-r";
|
|
sfp = <&sfp_eth61>;
|
|
managed = "in-band-status";
|
|
microchip,sd-sgpio = <369>;
|
|
};
|
|
port62: port@62 {
|
|
reg = <62>;
|
|
microchip,bandwidth = <25000>;
|
|
phys = <&serdes 31>;
|
|
phy-mode = "10gbase-r";
|
|
sfp = <&sfp_eth62>;
|
|
managed = "in-band-status";
|
|
microchip,sd-sgpio = <373>;
|
|
};
|
|
port63: port@63 {
|
|
reg = <63>;
|
|
microchip,bandwidth = <25000>;
|
|
phys = <&serdes 32>;
|
|
phy-mode = "10gbase-r";
|
|
sfp = <&sfp_eth63>;
|
|
managed = "in-band-status";
|
|
microchip,sd-sgpio = <377>;
|
|
};
|
|
/* Finally the Management interface */
|
|
port64: port@64 {
|
|
reg = <64>;
|
|
microchip,bandwidth = <1000>;
|
|
phys = <&serdes 0>;
|
|
phy-handle = <&phy64>;
|
|
phy-mode = "sgmii";
|
|
mac-address = [ 00 00 00 01 02 03 ];
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|
|
# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
|