111 lines
2.6 KiB
YAML
111 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
|
|
|
|
maintainers:
|
|
- Shawn Guo <shawnguo@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: ethernet-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: smsc,lan9115
|
|
- items:
|
|
- enum:
|
|
- smsc,lan89218
|
|
- smsc,lan9117
|
|
- smsc,lan9118
|
|
- smsc,lan9220
|
|
- smsc,lan9221
|
|
- const: smsc,lan9115
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
reg-shift: true
|
|
|
|
reg-io-width:
|
|
enum: [ 2, 4 ]
|
|
default: 2
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description:
|
|
LAN interrupt line
|
|
- description:
|
|
Optional PME (power management event) interrupt that is able to wake
|
|
up the host system with a 50ms pulse on network activity
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
phy-mode: true
|
|
|
|
smsc,irq-active-high:
|
|
type: boolean
|
|
description: Indicates the IRQ polarity is active-high
|
|
|
|
smsc,irq-push-pull:
|
|
type: boolean
|
|
description: Indicates the IRQ type is push-pull
|
|
|
|
smsc,force-internal-phy:
|
|
type: boolean
|
|
description: Forces SMSC LAN controller to use internal PHY
|
|
|
|
smsc,force-external-phy:
|
|
type: boolean
|
|
description: Forces SMSC LAN controller to use external PHY
|
|
|
|
smsc,save-mac-address:
|
|
type: boolean
|
|
description:
|
|
Indicates that MAC address needs to be saved before resetting the
|
|
controller
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description:
|
|
A GPIO line connected to the RESET (active low) signal of the device.
|
|
On many systems this is wired high so the device goes out of reset at
|
|
power-on, but if it is under program control, this optional GPIO can
|
|
wake up in response to it.
|
|
|
|
vdd33a-supply:
|
|
description: 3.3V analog power supply
|
|
|
|
vddvario-supply:
|
|
description: IO logic power supply
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
|
|
# "gpmc,*", ...) to be found, that actually depend on the compatible value of
|
|
# the parent node.
|
|
additionalProperties: true
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
ethernet@f4000000 {
|
|
compatible = "smsc,lan9220", "smsc,lan9115";
|
|
reg = <0xf4000000 0x2000000>;
|
|
phy-mode = "mii";
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <31>, <32>;
|
|
reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
|
reg-io-width = <4>;
|
|
smsc,irq-push-pull;
|
|
};
|