282 lines
8.4 KiB
YAML
282 lines
8.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. NVMEM OPP
|
|
|
|
maintainers:
|
|
- Ilia Lin <ilia.lin@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: opp-v2-base.yaml#
|
|
|
|
description: |
|
|
In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
|
|
the CPU frequencies subset and voltage value of each OPP varies based on
|
|
the silicon variant in use.
|
|
Qualcomm Technologies, Inc. Process Voltage Scaling Tables
|
|
defines the voltage and frequency value based on the speedbin blown in
|
|
the efuse combination.
|
|
The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
|
|
the OPP framework with required information (existing HW bitmap).
|
|
This is used to determine the voltage and frequency value for each OPP of
|
|
operating-points-v2 table when it is parsed by the OPP framework.
|
|
|
|
properties:
|
|
compatible:
|
|
const: operating-points-v2-kryo-cpu
|
|
|
|
nvmem-cells:
|
|
description: |
|
|
A phandle pointing to a nvmem-cells node representing the
|
|
efuse registers that has information about the
|
|
speedbin that is used to select the right frequency/voltage
|
|
value pair.
|
|
|
|
opp-shared: true
|
|
|
|
patternProperties:
|
|
'^opp-?[0-9]+$':
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
opp-hz: true
|
|
|
|
opp-microvolt: true
|
|
|
|
opp-supported-hw:
|
|
description: |
|
|
A single 32 bit bitmap value, representing compatible HW.
|
|
Bitmap for MSM8996 format:
|
|
0: MSM8996, speedbin 0
|
|
1: MSM8996, speedbin 1
|
|
2: MSM8996, speedbin 2
|
|
3: MSM8996, speedbin 3
|
|
4-31: unused
|
|
|
|
Bitmap for MSM8996SG format (speedbin shifted of 4 left):
|
|
0-3: unused
|
|
4: MSM8996SG, speedbin 0
|
|
5: MSM8996SG, speedbin 1
|
|
6: MSM8996SG, speedbin 2
|
|
7-31: unused
|
|
enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
|
|
0x9, 0xd, 0xe, 0xf,
|
|
0x10, 0x20, 0x30, 0x70]
|
|
|
|
clock-latency-ns: true
|
|
|
|
required-opps: true
|
|
|
|
required:
|
|
- opp-hz
|
|
|
|
required:
|
|
- compatible
|
|
|
|
if:
|
|
required:
|
|
- nvmem-cells
|
|
then:
|
|
patternProperties:
|
|
'^opp-?[0-9]+$':
|
|
required:
|
|
- opp-supported-hw
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
/ {
|
|
model = "Qualcomm Technologies, Inc. DB820c";
|
|
compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&CPU_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
clocks = <&kryocc 0>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
power-domains = <&cpr>;
|
|
power-domain-names = "cpr";
|
|
#cooling-cells = <2>;
|
|
next-level-cache = <&L2_0>;
|
|
L2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
};
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&CPU_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
clocks = <&kryocc 0>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
power-domains = <&cpr>;
|
|
power-domain-names = "cpr";
|
|
#cooling-cells = <2>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
|
|
CPU2: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&CPU_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
clocks = <&kryocc 1>;
|
|
operating-points-v2 = <&cluster1_opp>;
|
|
power-domains = <&cpr>;
|
|
power-domain-names = "cpr";
|
|
#cooling-cells = <2>;
|
|
next-level-cache = <&L2_1>;
|
|
L2_1: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
};
|
|
};
|
|
|
|
CPU3: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "qcom,kryo";
|
|
reg = <0x0 0x101>;
|
|
enable-method = "psci";
|
|
cpu-idle-states = <&CPU_SLEEP_0>;
|
|
capacity-dmips-mhz = <1024>;
|
|
clocks = <&kryocc 1>;
|
|
operating-points-v2 = <&cluster1_opp>;
|
|
power-domains = <&cpr>;
|
|
power-domain-names = "cpr";
|
|
#cooling-cells = <2>;
|
|
next-level-cache = <&L2_1>;
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster0_opp: opp-table-0 {
|
|
compatible = "operating-points-v2-kryo-cpu";
|
|
nvmem-cells = <&speedbin_efuse>;
|
|
opp-shared;
|
|
|
|
opp-307200000 {
|
|
opp-hz = /bits/ 64 <307200000>;
|
|
opp-microvolt = <905000 905000 1140000>;
|
|
opp-supported-hw = <0x7>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp1>;
|
|
};
|
|
opp-1401600000 {
|
|
opp-hz = /bits/ 64 <1401600000>;
|
|
opp-microvolt = <1140000 905000 1140000>;
|
|
opp-supported-hw = <0x5>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp2>;
|
|
};
|
|
opp-1593600000 {
|
|
opp-hz = /bits/ 64 <1593600000>;
|
|
opp-microvolt = <1140000 905000 1140000>;
|
|
opp-supported-hw = <0x1>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp3>;
|
|
};
|
|
};
|
|
|
|
cluster1_opp: opp-table-1 {
|
|
compatible = "operating-points-v2-kryo-cpu";
|
|
nvmem-cells = <&speedbin_efuse>;
|
|
opp-shared;
|
|
|
|
opp-307200000 {
|
|
opp-hz = /bits/ 64 <307200000>;
|
|
opp-microvolt = <905000 905000 1140000>;
|
|
opp-supported-hw = <0x7>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp1>;
|
|
};
|
|
opp-1804800000 {
|
|
opp-hz = /bits/ 64 <1804800000>;
|
|
opp-microvolt = <1140000 905000 1140000>;
|
|
opp-supported-hw = <0x6>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp4>;
|
|
};
|
|
opp-1900800000 {
|
|
opp-hz = /bits/ 64 <1900800000>;
|
|
opp-microvolt = <1140000 905000 1140000>;
|
|
opp-supported-hw = <0x4>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp5>;
|
|
};
|
|
opp-2150400000 {
|
|
opp-hz = /bits/ 64 <2150400000>;
|
|
opp-microvolt = <1140000 905000 1140000>;
|
|
opp-supported-hw = <0x1>;
|
|
clock-latency-ns = <200000>;
|
|
required-opps = <&cpr_opp6>;
|
|
};
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_mem>;
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
qfprom: qfprom@74000 {
|
|
compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
|
|
reg = <0x00074000 0x8ff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
speedbin_efuse: speedbin@133 {
|
|
reg = <0x133 0x1>;
|
|
bits = <5 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|