80 lines
1.6 KiB
Plaintext
80 lines
1.6 KiB
Plaintext
Broadcom NSP (Northstar plus) IOMUX Controller
|
|
|
|
The NSP IOMUX controller supports group based mux configuration. In
|
|
addition, certain pins can be muxed to GPIO function individually.
|
|
|
|
Required properties:
|
|
- compatible:
|
|
Must be "brcm,nsp-pinmux"
|
|
|
|
- reg:
|
|
Should contain the register physical address and length for each of
|
|
GPIO_CONTROL0, GP_AUX_SEL and IPROC_CONFIG IOMUX registers
|
|
|
|
Properties in subnodes:
|
|
- function:
|
|
The mux function to select
|
|
|
|
- groups:
|
|
The list of groups to select with a given function
|
|
|
|
For more details, refer to
|
|
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
|
|
For example:
|
|
|
|
pinmux: pinmux@1803f1c0 {
|
|
compatible = "brcm,nsp-pinmux";
|
|
reg = <0x1803f1c0 0x04>,
|
|
<0x18030028 0x04>,
|
|
<0x1803f408 0x04>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
|
|
|
|
pwm: pwm {
|
|
function = "pwm";
|
|
groups = "pwm0_grp", "pwm1_grp";
|
|
};
|
|
|
|
gpio_b: gpio_b {
|
|
function = "gpio_b";
|
|
groups = "gpio_b_0_grp", "gpio_b_1_grp";
|
|
};
|
|
|
|
nand_sel: nand_sel {
|
|
function = "nand";
|
|
groups = "nand_grp";
|
|
};
|
|
};
|
|
|
|
List of supported functions and groups in Northstar Plus:
|
|
|
|
"spi": "spi_grp"
|
|
|
|
"i2c": "i2c_grp"
|
|
|
|
"mdio": "mdio_grp"
|
|
|
|
"pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
|
|
|
|
"gpio_b": "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", "gpio_b_3_grp"
|
|
|
|
"uart1": "uart1_grp"
|
|
|
|
"uart2": "uart2_grp"
|
|
|
|
"synce": "synce_grp"
|
|
|
|
"sata_led_grps": "sata0_led_grp", "sata1_led_grp"
|
|
|
|
"xtal_out": "xtal_out_grp"
|
|
|
|
"sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
|
|
|
|
"switch_led": "switch_p05_led0_grp", "switch_p05_led1_grp"
|
|
|
|
"nand": "nand_grp"
|
|
|
|
"emmc": "emmc_grp"
|