kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml

233 lines
7.8 KiB
YAML
Raw Blame History

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MT8188 Pin Controller
maintainers:
- Hui Liu <hui.liu@mediatek.com>
description:
The MediaTek's MT8188 Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8188-pinctrl
gpio-controller: true
'#gpio-cells':
description:
Number of cells in GPIO specifier, should be two. The first cell is the
pin number, the second cell is used to specify optional parameters which
are defined in <dt-bindings/gpio/gpio.h>.
const: 2
gpio-ranges:
maxItems: 1
gpio-line-names: true
reg:
items:
- description: gpio registers base address
- description: rm group io configuration registers base address
- description: lt group io configuration registers base address
- description: lm group io configuration registers base address
- description: rt group io configuration registers base address
- description: eint registers base address
reg-names:
items:
- const: iocfg0
- const: iocfg_rm
- const: iocfg_lt
- const: iocfg_lm
- const: iocfg_rt
- const: eint
interrupt-controller: true
'#interrupt-cells':
const: 2
interrupts:
description: The interrupt outputs to sysirq.
maxItems: 1
mediatek,rsel-resistance-in-si-unit:
type: boolean
description:
We provide two methods to select the resistance for I2C when pull up or
pull down. The first is by RSEL definition value, another one is by
resistance value(ohm). This flag is used to identify if the method is
resistance(si unit) value.
# PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'^pins':
type: object
$ref: /schemas/pinctrl/pincfg-node.yaml
additionalProperties: false
description:
A pinctrl node should contain at least one subnode representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
properties:
pinmux:
description:
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h
directly, for this SoC.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
drive-strength-microamp:
enum: [125, 250, 500, 1000]
bias-pull-down:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8188 pull down PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
description: mt8188 pull down RSEL type define value.
- enum: [75000, 5000]
description: mt8188 pull down RSEL type si unit value(ohm).
description: |
For pull down type is normal, it doesn't need add RSEL & R1R0
define and resistance value.
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
"MTK_PUPD_SET_R1R0_11" define in mt8188.
For pull down type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
"mediatek,rsel-resistance-in-si-unit". It can support
"MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
"MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
"MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
"MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
mt8188. It can also support resistance value(ohm) "75000" & "5000"
in mt8188.
bias-pull-up:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8188 pull up PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
description: mt8188 pull up RSEL type define value.
- enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
description: mt8188 pull up RSEL type si unit value(ohm).
description: |
For pull up type is normal, it don't need add RSEL & R1R0 define
and resistance value.
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set
different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
"MTK_PUPD_SET_R1R0_11" define in mt8188.
For pull up type is RSEL, it can add RSEL define & resistance
value(ohm) to set different resistance by identifying property
"mediatek,rsel-resistance-in-si-unit". It can support
"MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
"MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
"MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
"MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
mt8188. It can also support resistance value(ohm) "1000" & "1500"
& "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
bias-disable: true
output-high: true
output-low: true
input-enable: true
input-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
required:
- pinmux
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pio: pinctrl@10005000 {
compatible = "mediatek,mt8188-pinctrl";
reg = <0x10005000 0x1000>,
<0x11c00000 0x1000>,
<0x11e10000 0x1000>,
<0x11e20000 0x1000>,
<0x11ea0000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "iocfg0", "iocfg_rm",
"iocfg_lt", "iocfg_lm", "iocfg_rt",
"eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 176>;
interrupt-controller;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
#interrupt-cells = <2>;
pio-pins {
pins {
pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
output-low;
};
};
spi0-pins {
pins-spi {
pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
drive-strength = <6>;
};
pins-spi-mi {
pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
<PINMUX_GPIO56__FUNC_B1_SDA0>;
bias-disable;
drive-strength-microamp = <1000>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink