125 lines
4.4 KiB
YAML
125 lines
4.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. MDM9607 TLMM block
|
|
|
|
maintainers:
|
|
- Konrad Dybcio <konrad.dybcio@somainline.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,mdm9607-tlmm
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
gpio-reserved-ranges: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-mdm9607-tlmm-state"
|
|
- patternProperties:
|
|
".*":
|
|
$ref: "#/$defs/qcom-mdm9607-tlmm-state"
|
|
|
|
$defs:
|
|
qcom-mdm9607-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
|
|
sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
|
|
qdsd_data3 ]
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
|
|
atest_char1, atest_char2, atest_char3,
|
|
atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
|
|
atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
|
|
bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
|
|
blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
|
|
blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
|
|
blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
|
|
blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
|
|
codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
|
|
cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
|
|
ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
|
|
gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
|
|
gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
|
|
gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
|
|
nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
|
|
nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
|
|
pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
|
|
pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
|
|
ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
|
|
pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
|
|
pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
|
|
qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
|
|
qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
|
|
qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
|
|
qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
|
|
rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
|
|
sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
|
|
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
|
|
uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,mdm9607-tlmm";
|
|
reg = <0x01000000 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&msmgpio 0 0 80>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|