130 lines
4.0 KiB
YAML
130 lines
4.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm MSM8976 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,msm8976-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 73
|
|
|
|
gpio-line-names:
|
|
maxItems: 145
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-msm8976-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-msm8976-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-msm8976-tlmm-state:
|
|
type: object
|
|
description:
|
|
Desired pin configuration for a device or its specific state (like sleep
|
|
or active).
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this state.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$"
|
|
- enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
|
|
qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
|
|
sdc2_clk, sdc2_cmd, sdc2_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
|
|
blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
|
|
qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
|
|
blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
|
|
qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
|
|
qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
|
|
blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
|
|
sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
|
|
blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
|
|
uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
|
|
uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present,
|
|
ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample,
|
|
sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter,
|
|
pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus,
|
|
lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2,
|
|
wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan,
|
|
wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down,
|
|
dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8,
|
|
wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
|
|
gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,msm8976-pinctrl";
|
|
reg = <0x1000000 0x300000>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&tlmm 0 0 145>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
blsp1-uart2-active-state {
|
|
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
|
function = "blsp_uart2";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|