165 lines
5.5 KiB
YAML
165 lines
5.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm MSM8998 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,msm8998-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 75
|
|
|
|
gpio-line-names:
|
|
maxItems: 150
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-msm8998-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-msm8998-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-msm8998-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
|
|
- enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
|
|
atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
|
|
atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref,
|
|
bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b,
|
|
blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi,
|
|
blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
|
|
blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9,
|
|
blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2,
|
|
blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
|
|
blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12,
|
|
blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b,
|
|
blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b,
|
|
blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a,
|
|
blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a,
|
|
blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a,
|
|
blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a,
|
|
blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async,
|
|
cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
|
|
cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
|
|
edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b,
|
|
gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
|
|
isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
|
|
m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
|
|
mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
|
|
nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
|
|
pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
|
|
pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
|
|
qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request,
|
|
qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43,
|
|
sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq,
|
|
ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0,
|
|
tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
|
|
uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
|
|
vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
|
|
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@3400000 {
|
|
compatible = "qcom,msm8998-pinctrl";
|
|
reg = <0x03400000 0xc00000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-ranges = <&tlmm 0 0 150>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
|
|
|
sdc2-off-state {
|
|
clk-pins {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-pins {
|
|
pins = "sdc2_cmd";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "sdc2_data";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdc2-cd-state {
|
|
pins = "gpio95";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|