153 lines
4.9 KiB
YAML
153 lines
4.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. SC7280 TLMM block
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sc7280-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
description: Specifies the TLMM summary IRQ
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
description:
|
|
Specifies the PIN numbers and Flags, as defined in defined in
|
|
include/dt-bindings/interrupt-controller/irq.h
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description: Specifying the pin number and flags, as defined in
|
|
include/dt-bindings/gpio/gpio.h
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
maxItems: 1
|
|
|
|
gpio-line-names:
|
|
maxItems: 175
|
|
|
|
wakeup-parent: true
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sc7280-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-sc7280-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-sc7280-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
|
|
- enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
|
|
sdc2_cmd, sdc2_data, ufs_reset ]
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ atest_char, atest_char0, atest_char1, atest_char2,
|
|
atest_char3, atest_usb0, atest_usb00, atest_usb01,
|
|
atest_usb02, atest_usb03, atest_usb1, atest_usb10,
|
|
atest_usb11, atest_usb12, atest_usb13, audio_ref,
|
|
cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
|
|
cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
|
|
cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
|
|
cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
|
|
dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
|
|
gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
|
|
mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
|
|
mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
|
|
mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
|
|
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
|
|
mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
|
|
mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
|
|
mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
|
|
pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag,
|
|
pll_bist, pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
|
|
qdss, qdss_cti, qlink0_enable, qlink0_request, qlink0_wmss,
|
|
qlink1_enable, qlink1_request, qlink1_wmss, qspi_clk, qspi_cs,
|
|
qspi_data, qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
|
|
qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
|
|
sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
|
|
sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
|
|
tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
|
|
uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
|
|
usb_phy, vfr_0, vfr_1, vsense_trigger ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@f000000 {
|
|
compatible = "qcom,sc7280-pinctrl";
|
|
reg = <0xf000000 0x1000000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 175>;
|
|
wakeup-parent = <&pdc>;
|
|
|
|
qup_uart5_default: qup-uart5-state {
|
|
pins = "gpio46", "gpio47";
|
|
function = "qup13";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|