143 lines
4.3 KiB
YAML
143 lines
4.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. SM8450 TLMM block
|
|
|
|
maintainers:
|
|
- Vinod Koul <vkoul@kernel.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sm8450-tlmm
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 105
|
|
|
|
gpio-line-names:
|
|
maxItems: 210
|
|
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sm8450-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-sm8450-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-sm8450-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
|
|
- enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
|
|
cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
|
|
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
|
|
ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
|
|
gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
|
|
mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
|
|
mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
|
|
mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
|
|
mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
|
|
mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
|
|
pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
|
|
prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
|
|
qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
|
|
qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
|
|
qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
|
|
qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
|
|
qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
|
|
qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
|
|
sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
|
|
tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
|
|
tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
|
|
uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
|
|
usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
pinctrl@f100000 {
|
|
compatible = "qcom,sm8450-tlmm";
|
|
reg = <0x0f100000 0x300000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 211>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
gpio-wo-state {
|
|
pins = "gpio1";
|
|
function = "gpio";
|
|
};
|
|
|
|
uart-w-state {
|
|
rx-pins {
|
|
pins = "gpio26";
|
|
function = "qup7";
|
|
bias-pull-up;
|
|
};
|
|
|
|
tx-pins {
|
|
pins = "gpio27";
|
|
function = "qup7";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
...
|