115 lines
2.9 KiB
YAML
115 lines
2.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (C) 2020 Texas Instruments Incorporated
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI BQ25980 Flash Charger
|
|
|
|
maintainers:
|
|
- Andrew Davis <afd@ti.com>
|
|
|
|
description: |
|
|
The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
|
|
for use in high-power density portable electronics. These inductorless
|
|
switching chargers can provide over 97% efficiency by making use of the
|
|
switched capacitor architecture.
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ti,bq25980
|
|
- ti,bq25975
|
|
- ti,bq25960
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
ti,watchdog-timeout-ms:
|
|
description: |
|
|
Watchdog timer in milli seconds. 0 disables the watchdog.
|
|
default: 0
|
|
minimum: 0
|
|
maximum: 300000
|
|
enum: [ 0, 5000, 10000, 50000, 300000]
|
|
|
|
ti,sc-ovp-limit-microvolt:
|
|
description: |
|
|
Minimum input voltage limit in micro volts with a when the charger is in
|
|
switch cap mode. 100000 micro volt step.
|
|
default: 17800000
|
|
minimum: 14000000
|
|
maximum: 22000000
|
|
|
|
ti,sc-ocp-limit-microamp:
|
|
description: |
|
|
Maximum input current limit in micro amps with a 100000 micro amp step.
|
|
minimum: 100000
|
|
maximum: 3300000
|
|
|
|
ti,bypass-ovp-limit-microvolt:
|
|
description: |
|
|
Minimum input voltage limit in micro volts with a when the charger is in
|
|
switch cap mode. 50000 micro volt step.
|
|
minimum: 7000000
|
|
maximum: 12750000
|
|
|
|
ti,bypass-ocp-limit-microamp:
|
|
description: |
|
|
Maximum input current limit in micro amps with a 100000 micro amp step.
|
|
minimum: 100000
|
|
maximum: 3300000
|
|
|
|
ti,bypass-enable:
|
|
type: boolean
|
|
description: Enables bypass mode at boot time
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description: |
|
|
Indicates that the device state has changed.
|
|
|
|
monitored-battery:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: phandle to the battery node being monitored
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- monitored-battery
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
bat: battery {
|
|
compatible = "simple-battery";
|
|
constant-charge-current-max-microamp = <4000000>;
|
|
constant-charge-voltage-max-microvolt = <8400000>;
|
|
precharge-current-microamp = <160000>;
|
|
charge-term-current-microamp = <160000>;
|
|
};
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bq25980: charger@65 {
|
|
compatible = "ti,bq25980";
|
|
reg = <0x65>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
|
|
ti,watchdog-timeout-ms = <0>;
|
|
ti,sc-ocp-limit-microamp = <2000000>;
|
|
ti,sc-ovp-limit-microvolt = <17800000>;
|
|
monitored-battery = <&bat>;
|
|
};
|
|
};
|
|
|
|
...
|