92 lines
2.0 KiB
YAML
92 lines
2.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/infineon,peb2466.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Infineon PEB2466 codec
|
|
|
|
maintainers:
|
|
- Herve Codina <herve.codina@bootlin.com>
|
|
|
|
description: |
|
|
The Infineon PEB2466 codec is a programmable DSP-based four channels codec
|
|
with filters capabilities.
|
|
|
|
The time-slots used by the codec must be set and so, the properties
|
|
'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
|
|
'dai-tdm-slot-rx-mask' must be present in the sound card node for sub-nodes
|
|
that involve the codec. The codec uses one 8bit time-slot per channel.
|
|
'dai-tdm-tdm-slot-with' must be set to 8.
|
|
|
|
The PEB2466 codec also supports 28 gpios (signaling pins).
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml
|
|
- $ref: dai-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: infineon,peb2466
|
|
|
|
reg:
|
|
description:
|
|
SPI device address.
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: Master clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: mclk
|
|
|
|
spi-max-frequency:
|
|
maximum: 8192000
|
|
|
|
reset-gpios:
|
|
description:
|
|
GPIO used to reset the device.
|
|
maxItems: 1
|
|
|
|
firmware-name:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description:
|
|
Filters coefficients file to load. If this property is omitted, internal
|
|
filters are disabled.
|
|
|
|
'#sound-dai-cells':
|
|
const: 0
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- '#sound-dai-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
audio-codec@0 {
|
|
compatible = "infineon,peb2466";
|
|
reg = <0>;
|
|
spi-max-frequency = <8192000>;
|
|
reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
|
#sound-dai-cells = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|