197 lines
6.2 KiB
YAML
197 lines
6.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Broadcom SPI controller
|
|
|
|
maintainers:
|
|
- Kamal Dasu <kdasu.kdev@gmail.com>
|
|
- Rafał Miłecki <rafal@milecki.pl>
|
|
|
|
description: |
|
|
The Broadcom SPI controller is a SPI master found on various SOCs, including
|
|
BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
|
|
of:
|
|
MSPI : SPI master controller can read and write to a SPI slave device
|
|
BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
|
|
for flash reads and be configured to do single, double, quad lane
|
|
io with 3-byte and 4-byte addressing support.
|
|
|
|
Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
|
|
MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
|
|
of a MSPI master without the BSPI to use with non flash slave devices that
|
|
use SPI protocol.
|
|
|
|
allOf:
|
|
- $ref: spi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- description: Second Instance of MSPI BRCMSTB SoCs
|
|
items:
|
|
- enum:
|
|
- brcm,spi-bcm7425-qspi
|
|
- brcm,spi-bcm7429-qspi
|
|
- brcm,spi-bcm7435-qspi
|
|
- brcm,spi-bcm7445-qspi
|
|
- brcm,spi-bcm7216-qspi
|
|
- brcm,spi-bcm7278-qspi
|
|
- const: brcm,spi-bcm-qspi
|
|
- const: brcm,spi-brcmstb-mspi
|
|
- description: Second Instance of MSPI BRCMSTB SoCs
|
|
items:
|
|
- enum:
|
|
- brcm,spi-brcmstb-qspi
|
|
- brcm,spi-brcmstb-mspi
|
|
- brcm,spi-nsp-qspi
|
|
- brcm,spi-ns2-qspi
|
|
- const: brcm,spi-bcm-qspi
|
|
|
|
reg:
|
|
minItems: 1
|
|
maxItems: 5
|
|
|
|
reg-names:
|
|
minItems: 1
|
|
items:
|
|
- const: mspi
|
|
- const: bspi
|
|
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
|
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
|
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 7
|
|
|
|
interrupt-names:
|
|
oneOf:
|
|
- minItems: 1
|
|
items:
|
|
- const: mspi_done
|
|
- const: mspi_halted
|
|
- const: spi_lr_fullness_reached
|
|
- const: spi_lr_session_aborted
|
|
- const: spi_lr_impatient
|
|
- const: spi_lr_session_done
|
|
- const: spi_lr_overread
|
|
- const: spi_l1_intr
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
description: reference clock for this block
|
|
|
|
native-endian:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: Defined when using BE SoC and device uses BE register read/write
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- reg
|
|
- reg-names
|
|
- interrupts
|
|
- interrupt-names
|
|
|
|
examples:
|
|
- | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
|
|
spi@f03e3400 {
|
|
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
|
|
reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
|
|
reg-names = "mspi", "bspi", "cs_reg";
|
|
interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
|
|
interrupt-parent = <&gic>;
|
|
interrupt-names = "mspi_done",
|
|
"mspi_halted",
|
|
"spi_lr_fullness_reached",
|
|
"spi_lr_session_aborted",
|
|
"spi_lr_impatient",
|
|
"spi_lr_session_done",
|
|
"spi_lr_overread";
|
|
clocks = <&hif_spi>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
flash@0 {
|
|
#size-cells = <0x2>;
|
|
#address-cells = <0x2>;
|
|
compatible = "m25p80";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <0x2625a00>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
};
|
|
};
|
|
- | # BRCMSTB SoC: MSPI master for any SPI device
|
|
spi@f0416000 {
|
|
clocks = <&upg_fixed>;
|
|
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
|
|
reg = <0xf0416000 0x180>;
|
|
reg-names = "mspi";
|
|
interrupts = <0x14>;
|
|
interrupt-parent = <&irq0_aon_intc>;
|
|
interrupt-names = "mspi_done";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
- | # iProc SoC
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
spi@18027200 {
|
|
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
|
|
reg = <0x18027200 0x184>,
|
|
<0x18027000 0x124>,
|
|
<0x1811c408 0x004>,
|
|
<0x180273a0 0x01c>;
|
|
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mspi_done",
|
|
"mspi_halted",
|
|
"spi_lr_fullness_reached",
|
|
"spi_lr_session_aborted",
|
|
"spi_lr_impatient",
|
|
"spi_lr_session_done";
|
|
clocks = <&iprocmed>;
|
|
num-cs = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
- | # NS2 SoC
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
spi@66470200 {
|
|
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
|
|
reg = <0x66470200 0x184>,
|
|
<0x66470000 0x124>,
|
|
<0x67017408 0x004>,
|
|
<0x664703a0 0x01c>;
|
|
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
|
|
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "spi_l1_intr";
|
|
clocks = <&iprocmed>;
|
|
num-cs = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "m25p80";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <12500000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
};
|
|
};
|