101 lines
2.5 KiB
YAML
101 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
|
|
|
|
maintainers:
|
|
- Gene Chen <gene_chen@richtek.com>
|
|
|
|
description: |
|
|
The RT1711H is a USB Type-C controller that complies with the latest
|
|
USB Type-C and PD standards. It does the USB Type-C detection including attach
|
|
and orientation. It integrates the physical layer of the USB BMC power
|
|
delivery protocol to allow up to 100W of power. The BMC PD block enables full
|
|
support for alternative interfaces of the Type-C specification.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- richtek,rt1711h
|
|
- richtek,rt1715
|
|
description:
|
|
RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
wakeup-source:
|
|
type: boolean
|
|
|
|
connector:
|
|
type: object
|
|
$ref: /schemas/connector/usb-connector.yaml#
|
|
description:
|
|
Properties for usb c connector.
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- connector
|
|
- interrupts
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rt1711h@4e {
|
|
compatible = "richtek,rt1711h";
|
|
reg = <0x4e>;
|
|
interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
|
|
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
|
|
op-sink-microwatt = <10000000>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
endpoint {
|
|
remote-endpoint = <&usb_hs>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
endpoint {
|
|
remote-endpoint = <&usb_ss>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
endpoint {
|
|
remote-endpoint = <&dp_aux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|