233 lines
8.3 KiB
ReStructuredText
233 lines
8.3 KiB
ReStructuredText
==============
|
|
DMA Test Guide
|
|
==============
|
|
|
|
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
|
This small document introduces how to test DMA drivers using dmatest module.
|
|
|
|
The dmatest module tests DMA memcpy, memset, XOR and RAID6 P+Q operations using
|
|
various lengths and various offsets into the source and destination buffers. It
|
|
will initialize both buffers with a repeatable pattern and verify that the DMA
|
|
engine copies the requested region and nothing more. It will also verify that
|
|
the bytes aren't swapped around, and that the source buffer isn't modified.
|
|
|
|
The dmatest module can be configured to test a specific channel. It can also
|
|
test multiple channels at the same time, and it can start multiple threads
|
|
competing for the same channel.
|
|
|
|
.. note::
|
|
The test suite works only on the channels that have at least one
|
|
capability of the following: DMA_MEMCPY (memory-to-memory), DMA_MEMSET
|
|
(const-to-memory or memory-to-memory, when emulated), DMA_XOR, DMA_PQ.
|
|
|
|
.. note::
|
|
In case of any related questions use the official mailing list
|
|
dmaengine@vger.kernel.org.
|
|
|
|
Part 1 - How to build the test module
|
|
=====================================
|
|
|
|
The menuconfig contains an option that could be found by following path:
|
|
|
|
Device Drivers -> DMA Engine support -> DMA Test client
|
|
|
|
In the configuration file the option called CONFIG_DMATEST. The dmatest could
|
|
be built as module or inside kernel. Let's consider those cases.
|
|
|
|
Part 2 - When dmatest is built as a module
|
|
==========================================
|
|
|
|
Example of usage::
|
|
|
|
% modprobe dmatest timeout=2000 iterations=1 channel=dma0chan0 run=1
|
|
|
|
...or::
|
|
|
|
% modprobe dmatest
|
|
% echo 2000 > /sys/module/dmatest/parameters/timeout
|
|
% echo 1 > /sys/module/dmatest/parameters/iterations
|
|
% echo dma0chan0 > /sys/module/dmatest/parameters/channel
|
|
% echo 1 > /sys/module/dmatest/parameters/run
|
|
|
|
...or on the kernel command line::
|
|
|
|
dmatest.timeout=2000 dmatest.iterations=1 dmatest.channel=dma0chan0 dmatest.run=1
|
|
|
|
Example of multi-channel test usage (new in the 5.0 kernel)::
|
|
|
|
% modprobe dmatest
|
|
% echo 2000 > /sys/module/dmatest/parameters/timeout
|
|
% echo 1 > /sys/module/dmatest/parameters/iterations
|
|
% echo dma0chan0 > /sys/module/dmatest/parameters/channel
|
|
% echo dma0chan1 > /sys/module/dmatest/parameters/channel
|
|
% echo dma0chan2 > /sys/module/dmatest/parameters/channel
|
|
% echo 1 > /sys/module/dmatest/parameters/run
|
|
|
|
.. note::
|
|
For all tests, starting in the 5.0 kernel, either single- or multi-channel,
|
|
the channel parameter(s) must be set after all other parameters. It is at
|
|
that time that the existing parameter values are acquired for use by the
|
|
thread(s). All other parameters are shared. Therefore, if changes are made
|
|
to any of the other parameters, and an additional channel specified, the
|
|
(shared) parameters used for all threads will use the new values.
|
|
After the channels are specified, each thread is set as pending. All threads
|
|
begin execution when the run parameter is set to 1.
|
|
|
|
.. hint::
|
|
A list of available channels can be found by running the following command::
|
|
|
|
% ls -1 /sys/class/dma/
|
|
|
|
Once started a message like " dmatest: Added 1 threads using dma0chan0" is
|
|
emitted. A thread for that specific channel is created and is now pending, the
|
|
pending thread is started once run is to 1.
|
|
|
|
Note that running a new test will not stop any in progress test.
|
|
|
|
The following command returns the state of the test. ::
|
|
|
|
% cat /sys/module/dmatest/parameters/run
|
|
|
|
To wait for test completion userspace can poll 'run' until it is false, or use
|
|
the wait parameter. Specifying 'wait=1' when loading the module causes module
|
|
initialization to pause until a test run has completed, while reading
|
|
/sys/module/dmatest/parameters/wait waits for any running test to complete
|
|
before returning. For example, the following scripts wait for 42 tests
|
|
to complete before exiting. Note that if 'iterations' is set to 'infinite' then
|
|
waiting is disabled.
|
|
|
|
Example::
|
|
|
|
% modprobe dmatest run=1 iterations=42 wait=1
|
|
% modprobe -r dmatest
|
|
|
|
...or::
|
|
|
|
% modprobe dmatest run=1 iterations=42
|
|
% cat /sys/module/dmatest/parameters/wait
|
|
% modprobe -r dmatest
|
|
|
|
Part 3 - When built-in in the kernel
|
|
====================================
|
|
|
|
The module parameters that is supplied to the kernel command line will be used
|
|
for the first performed test. After user gets a control, the test could be
|
|
re-run with the same or different parameters. For the details see the above
|
|
section `Part 2 - When dmatest is built as a module`_.
|
|
|
|
In both cases the module parameters are used as the actual values for the test
|
|
case. You always could check them at run-time by running ::
|
|
|
|
% grep -H . /sys/module/dmatest/parameters/*
|
|
|
|
Part 4 - Gathering the test results
|
|
===================================
|
|
|
|
Test results are printed to the kernel log buffer with the format::
|
|
|
|
"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
|
|
|
|
Example of output::
|
|
|
|
% dmesg | tail -n 1
|
|
dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
|
|
|
|
The message format is unified across the different types of errors. A
|
|
number in the parentheses represents additional information, e.g. error
|
|
code, error counter, or status. A test thread also emits a summary line at
|
|
completion listing the number of tests executed, number that failed, and a
|
|
result code.
|
|
|
|
Example::
|
|
|
|
% dmesg | tail -n 1
|
|
dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
|
|
|
|
The details of a data miscompare error are also emitted, but do not follow the
|
|
above format.
|
|
|
|
Part 5 - Handling channel allocation
|
|
====================================
|
|
|
|
Allocating Channels
|
|
-------------------
|
|
|
|
Channels do not need to be configured prior to starting a test run. Attempting
|
|
to run the test without configuring the channels will result in testing any
|
|
channels that are available.
|
|
|
|
Example::
|
|
|
|
% echo 1 > /sys/module/dmatest/parameters/run
|
|
dmatest: No channels configured, continue with any
|
|
|
|
Channels are registered using the "channel" parameter. Channels can be requested by their
|
|
name, once requested, the channel is registered and a pending thread is added to the test list.
|
|
|
|
Example::
|
|
|
|
% echo dma0chan2 > /sys/module/dmatest/parameters/channel
|
|
dmatest: Added 1 threads using dma0chan2
|
|
|
|
More channels can be added by repeating the example above.
|
|
Reading back the channel parameter will return the name of last channel that was added successfully.
|
|
|
|
Example::
|
|
|
|
% echo dma0chan1 > /sys/module/dmatest/parameters/channel
|
|
dmatest: Added 1 threads using dma0chan1
|
|
% echo dma0chan2 > /sys/module/dmatest/parameters/channel
|
|
dmatest: Added 1 threads using dma0chan2
|
|
% cat /sys/module/dmatest/parameters/channel
|
|
dma0chan2
|
|
|
|
Another method of requesting channels is to request a channel with an empty string, Doing so
|
|
will request all channels available to be tested:
|
|
|
|
Example::
|
|
|
|
% echo "" > /sys/module/dmatest/parameters/channel
|
|
dmatest: Added 1 threads using dma0chan0
|
|
dmatest: Added 1 threads using dma0chan3
|
|
dmatest: Added 1 threads using dma0chan4
|
|
dmatest: Added 1 threads using dma0chan5
|
|
dmatest: Added 1 threads using dma0chan6
|
|
dmatest: Added 1 threads using dma0chan7
|
|
dmatest: Added 1 threads using dma0chan8
|
|
|
|
At any point during the test configuration, reading the "test_list" parameter will
|
|
print the list of currently pending tests.
|
|
|
|
Example::
|
|
|
|
% cat /sys/module/dmatest/parameters/test_list
|
|
dmatest: 1 threads using dma0chan0
|
|
dmatest: 1 threads using dma0chan3
|
|
dmatest: 1 threads using dma0chan4
|
|
dmatest: 1 threads using dma0chan5
|
|
dmatest: 1 threads using dma0chan6
|
|
dmatest: 1 threads using dma0chan7
|
|
dmatest: 1 threads using dma0chan8
|
|
|
|
Note: Channels will have to be configured for each test run as channel configurations do not
|
|
carry across to the next test run.
|
|
|
|
Releasing Channels
|
|
-------------------
|
|
|
|
Channels can be freed by setting run to 0.
|
|
|
|
Example::
|
|
|
|
% echo dma0chan1 > /sys/module/dmatest/parameters/channel
|
|
dmatest: Added 1 threads using dma0chan1
|
|
% cat /sys/class/dma/dma0chan1/in_use
|
|
1
|
|
% echo 0 > /sys/module/dmatest/parameters/run
|
|
% cat /sys/class/dma/dma0chan1/in_use
|
|
0
|
|
|
|
Channels allocated by previous test runs are automatically freed when a new
|
|
channel is requested after completing a successful test run.
|