379 lines
16 KiB
ReStructuredText
379 lines
16 KiB
ReStructuredText
=================
|
|
MIDI 2.0 on Linux
|
|
=================
|
|
|
|
General
|
|
=======
|
|
|
|
MIDI 2.0 is an extended protocol for providing higher resolutions and
|
|
more fine controls over the legacy MIDI 1.0. The fundamental changes
|
|
introduced for supporting MIDI 2.0 are:
|
|
|
|
- Support of Universal MIDI Packet (UMP)
|
|
- Support of MIDI 2.0 protocol messages
|
|
- Transparent conversions between UMP and legacy MIDI 1.0 byte stream
|
|
- MIDI-CI for property and profile configurations
|
|
|
|
UMP is a new container format to hold all MIDI protocol 1.0 and MIDI
|
|
2.0 protocol messages. Unlike the former byte stream, it's 32bit
|
|
aligned, and each message can be put in a single packet. UMP can send
|
|
the events up to 16 "UMP Groups", where each UMP Group contain up to
|
|
16 MIDI channels.
|
|
|
|
MIDI 2.0 protocol is an extended protocol to achieve the higher
|
|
resolution and more controls over the old MIDI 1.0 protocol.
|
|
|
|
MIDI-CI is a high-level protocol that can talk with the MIDI device
|
|
for the flexible profiles and configurations. It's represented in the
|
|
form of special SysEx.
|
|
|
|
For Linux implementations, the kernel supports the UMP transport and
|
|
the encoding/decoding of MIDI protocols on UMP, while MIDI-CI is
|
|
supported in user-space over the standard SysEx.
|
|
|
|
As of this writing, only USB MIDI device supports the UMP and Linux
|
|
2.0 natively. The UMP support itself is pretty generic, hence it
|
|
could be used by other transport layers, although it could be
|
|
implemented differently (e.g. as a ALSA sequencer client), too.
|
|
|
|
The access to UMP devices are provided in two ways: the access via
|
|
rawmidi device and the access via ALSA sequencer API.
|
|
|
|
ALSA sequencer API was extended to allow the payload of UMP packets.
|
|
It's allowed to connect freely between MIDI 1.0 and MIDI 2.0 sequencer
|
|
clients, and the events are converted transparently.
|
|
|
|
|
|
Kernel Configuration
|
|
====================
|
|
|
|
The following new configs are added for supporting MIDI 2.0:
|
|
`CONFIG_SND_UMP`, `CONFIG_SND_UMP_LEGACY_RAWMIDI`,
|
|
`CONFIG_SND_SEQ_UMP`, `CONFIG_SND_SEQ_UMP_CLIENT`, and
|
|
`CONFIG_SND_USB_AUDIO_MIDI_V2`. The first visible one is
|
|
`CONFIG_SND_USB_AUDIO_MIDI_V2`, and when you choose it (to set `=y`),
|
|
the core support for UMP (`CONFIG_SND_UMP`) and the sequencer binding
|
|
(`CONFIG_SND_SEQ_UMP_CLIENT`) will be automatically selected.
|
|
|
|
Additionally, `CONFIG_SND_UMP_LEGACY_RAWMIDI=y` will enable the
|
|
support for the legacy raw MIDI device for UMP Endpoints.
|
|
|
|
|
|
Rawmidi Device with USB MIDI 2.0
|
|
================================
|
|
|
|
When a device supports MIDI 2.0, the USB-audio driver probes and uses
|
|
the MIDI 2.0 interface (that is found always at the altset 1) as
|
|
default instead of the MIDI 1.0 interface (at altset 0). You can
|
|
switch back to the binding with the old MIDI 1.0 interface by passing
|
|
`midi2_enable=0` option to snd-usb-audio driver module, too.
|
|
|
|
The USB audio driver tries to query the UMP Endpoint and UMP Function
|
|
Block information that are provided since UMP v1.1, and builds up the
|
|
topology based on those information. When the device is older and
|
|
doesn't respond to the new UMP inquiries, the driver falls back and
|
|
builds the topology based on Group Terminal Block (GTB) information
|
|
from the USB descriptor. Some device might be screwed up by the
|
|
unexpected UMP command; in such a case, pass `midi2_probe=0` option to
|
|
snd-usb-audio driver for skipping the UMP v1.1 inquiries.
|
|
|
|
When the MIDI 2.0 device is probed, the kernel creates a rawmidi
|
|
device for each UMP Endpoint of the device. Its device name is
|
|
`/dev/snd/umpC*D*` and different from the standard rawmidi device name
|
|
`/dev/snd/midiC*D*` for MIDI 1.0, in order to avoid confusing the
|
|
legacy applications accessing mistakenly to UMP devices.
|
|
|
|
You can read and write UMP packet data directly from/to this UMP
|
|
rawmidi device. For example, reading via `hexdump` like below will
|
|
show the incoming UMP packets of the card 0 device 0 in the hex
|
|
format::
|
|
|
|
% hexdump -C /dev/snd/umpC0D0
|
|
00000000 01 07 b0 20 00 07 b0 20 64 3c 90 20 64 3c 80 20 |... ... d<. d<. |
|
|
|
|
Unlike the MIDI 1.0 byte stream, UMP is a 32bit packet, and the size
|
|
for reading or writing the device is also aligned to 32bit (which is 4
|
|
bytes).
|
|
|
|
The 32-bit words in the UMP packet payload are always in CPU native
|
|
endianness. Transport drivers are responsible to convert UMP words
|
|
from / to system endianness to required transport endianness / byte
|
|
order.
|
|
|
|
When `CONFIG_SND_UMP_LEGACY_RAWMIDI` is set, the driver creates
|
|
another standard raw MIDI device additionally as `/dev/snd/midiC*D*`.
|
|
This contains 16 substreams, and each substream corresponds to a
|
|
(0-based) UMP Group. Legacy applications can access to the specified
|
|
group via each substream in MIDI 1.0 byte stream format. With the
|
|
ALSA rawmidi API, you can open the arbitrary substream, while just
|
|
opening `/dev/snd/midiC*D*` will end up with opening the first
|
|
substream.
|
|
|
|
Each UMP Endpoint can provide the additional information, constructed
|
|
from the information inquired via UMP 1.1 Stream messages or USB MIDI
|
|
2.0 descriptors. And a UMP Endpoint may contain one or more UMP
|
|
Blocks, where UMP Block is an abstraction introduced in the ALSA UMP
|
|
implementations to represent the associations among UMP Groups. UMP
|
|
Block corresponds to Function Block in UMP 1.1 specification. When
|
|
UMP 1.1 Function Block information isn't available, it's filled
|
|
partially from Group Terminal Block (GTB) as defined in USB MIDI 2.0
|
|
specifications.
|
|
|
|
The information of UMP Endpoints and UMP Blocks are found in the proc
|
|
file `/proc/asound/card*/midi*`. For example::
|
|
|
|
% cat /proc/asound/card1/midi0
|
|
ProtoZOA MIDI
|
|
|
|
Type: UMP
|
|
EP Name: ProtoZOA
|
|
EP Product ID: ABCD12345678
|
|
UMP Version: 0x0000
|
|
Protocol Caps: 0x00000100
|
|
Protocol: 0x00000100
|
|
Num Blocks: 3
|
|
|
|
Block 0 (ProtoZOA Main)
|
|
Direction: bidirection
|
|
Active: Yes
|
|
Groups: 1-1
|
|
Is MIDI1: No
|
|
|
|
Block 1 (ProtoZOA Ext IN)
|
|
Direction: output
|
|
Active: Yes
|
|
Groups: 2-2
|
|
Is MIDI1: Yes (Low Speed)
|
|
....
|
|
|
|
Note that `Groups` field shown in the proc file above indicates the
|
|
1-based UMP Group numbers (from-to).
|
|
|
|
Those additional UMP Endpoint and UMP Block information can be
|
|
obtained via the new ioctls `SNDRV_UMP_IOCTL_ENDPOINT_INFO` and
|
|
`SNDRV_UMP_IOCTL_BLOCK_INFO`, respectively.
|
|
|
|
The rawmidi name and the UMP Endpoint name are usually identical, and
|
|
in the case of USB MIDI, it's taken from `iInterface` of the
|
|
corresponding USB MIDI interface descriptor. If it's not provided,
|
|
it's copied from `iProduct` of the USB device descriptor as a
|
|
fallback.
|
|
|
|
The Endpoint Product ID is a string field and supposed to be unique.
|
|
It's copied from `iSerialNumber` of the device for USB MIDI.
|
|
|
|
The protocol capabilities and the actual protocol bits are defined in
|
|
`asound.h`.
|
|
|
|
|
|
ALSA Sequencer with USB MIDI 2.0
|
|
================================
|
|
|
|
In addition to the rawmidi interfaces, ALSA sequencer interface
|
|
supports the new UMP MIDI 2.0 device, too. Now, each ALSA sequencer
|
|
client may set its MIDI version (0, 1 or 2) to declare itself being
|
|
either the legacy, UMP MIDI 1.0 or UMP MIDI 2.0 device, respectively.
|
|
The first, legacy client is the one that sends/receives the old
|
|
sequencer event as was. Meanwhile, UMP MIDI 1.0 and 2.0 clients send
|
|
and receive in the extended event record for UMP. The MIDI version is
|
|
seen in the new `midi_version` field of `snd_seq_client_info`.
|
|
|
|
A UMP packet can be sent/received in a sequencer event embedded by
|
|
specifying the new event flag bit `SNDRV_SEQ_EVENT_UMP`. When this
|
|
flag is set, the event has 16 byte (128 bit) data payload for holding
|
|
the UMP packet. Without the `SNDRV_SEQ_EVENT_UMP` bit flag, the event
|
|
is treated as a legacy event as it was (with max 12 byte data
|
|
payload).
|
|
|
|
With `SNDRV_SEQ_EVENT_UMP` flag set, the type field of a UMP sequencer
|
|
event is ignored (but it should be set to 0 as default).
|
|
|
|
The type of each client can be seen in `/proc/asound/seq/clients`.
|
|
For example::
|
|
|
|
% cat /proc/asound/seq/clients
|
|
Client info
|
|
cur clients : 3
|
|
....
|
|
Client 14 : "Midi Through" [Kernel Legacy]
|
|
Port 0 : "Midi Through Port-0" (RWe-)
|
|
Client 20 : "ProtoZOA" [Kernel UMP MIDI1]
|
|
UMP Endpoint: ProtoZOA
|
|
UMP Block 0: ProtoZOA Main [Active]
|
|
Groups: 1-1
|
|
UMP Block 1: ProtoZOA Ext IN [Active]
|
|
Groups: 2-2
|
|
UMP Block 2: ProtoZOA Ext OUT [Active]
|
|
Groups: 3-3
|
|
Port 0 : "MIDI 2.0" (RWeX) [In/Out]
|
|
Port 1 : "ProtoZOA Main" (RWeX) [In/Out]
|
|
Port 2 : "ProtoZOA Ext IN" (-We-) [Out]
|
|
Port 3 : "ProtoZOA Ext OUT" (R-e-) [In]
|
|
|
|
Here you can find two types of kernel clients, "Legacy" for client 14,
|
|
and "UMP MIDI1" for client 20, which is a USB MIDI 2.0 device.
|
|
A USB MIDI 2.0 client gives always the port 0 as "MIDI 2.0" and the
|
|
rest ports from 1 for each UMP Group (e.g. port 1 for Group 1).
|
|
In this example, the device has three active groups (Main, Ext IN and
|
|
Ext OUT), and those are exposed as sequencer ports from 1 to 3.
|
|
The "MIDI 2.0" port is for a UMP Endpoint, and its difference from
|
|
other UMP Group ports is that UMP Endpoint port sends the events from
|
|
the all ports on the device ("catch-all"), while each UMP Group port
|
|
sends only the events from the given UMP Group.
|
|
Also, UMP groupless messages (such as the UMP message type 0x0f) are
|
|
sent only to the UMP Endpoint port.
|
|
|
|
Note that, although each UMP sequencer client usually creates 16
|
|
ports, those ports that don't belong to any UMP Blocks (or belonging
|
|
to inactive UMP Blocks) are marked as inactive, and they don't appear
|
|
in the proc outputs. In the example above, the sequencer ports from 4
|
|
to 16 are present but not shown there.
|
|
|
|
The proc file above shows the UMP Block information, too. The same
|
|
entry (but with more detailed information) is found in the rawmidi
|
|
proc output.
|
|
|
|
When clients are connected between different MIDI versions, the events
|
|
are translated automatically depending on the client's version, not
|
|
only between the legacy and the UMP MIDI 1.0/2.0 types, but also
|
|
between UMP MIDI 1.0 and 2.0 types, too. For example, running
|
|
`aseqdump` program on the ProtoZOA Main port in the legacy mode will
|
|
give you the output like::
|
|
|
|
% aseqdump -p 20:1
|
|
Waiting for data. Press Ctrl+C to end.
|
|
Source Event Ch Data
|
|
20:1 Note on 0, note 60, velocity 100
|
|
20:1 Note off 0, note 60, velocity 100
|
|
20:1 Control change 0, controller 11, value 4
|
|
|
|
When you run `aseqdump` in MIDI 2.0 mode, it'll receive the high
|
|
precision data like::
|
|
|
|
% aseqdump -u 2 -p 20:1
|
|
Waiting for data. Press Ctrl+C to end.
|
|
Source Event Ch Data
|
|
20:1 Note on 0, note 60, velocity 0xc924, attr type = 0, data = 0x0
|
|
20:1 Note off 0, note 60, velocity 0xc924, attr type = 0, data = 0x0
|
|
20:1 Control change 0, controller 11, value 0x2000000
|
|
|
|
while the data is automatically converted by ALSA sequencer core.
|
|
|
|
|
|
Rawmidi API Extensions
|
|
======================
|
|
|
|
* The additional UMP Endpoint information can be obtained via the new
|
|
ioctl `SNDRV_UMP_IOCTL_ENDPOINT_INFO`. It contains the associated
|
|
card and device numbers, the bit flags, the protocols, the number of
|
|
UMP Blocks, the name string of the endpoint, etc.
|
|
|
|
The protocols are specified in two field, the protocol capabilities
|
|
and the current protocol. Both contain the bit flags specifying the
|
|
MIDI protocol version (`SNDRV_UMP_EP_INFO_PROTO_MIDI1` or
|
|
`SNDRV_UMP_EP_INFO_PROTO_MIDI2`) in the upper byte and the jitter
|
|
reduction timestamp (`SNDRV_UMP_EP_INFO_PROTO_JRTS_TX` and
|
|
`SNDRV_UMP_EP_INFO_PROTO_JRTS_RX`) in the lower byte.
|
|
|
|
A UMP Endpoint may contain up to 32 UMP Blocks, and the number of
|
|
the currently assigned blocks are shown in the Endpoint information.
|
|
|
|
* Each UMP Block information can be obtained via another new ioctl
|
|
`SNDRV_UMP_IOCTL_BLOCK_INFO`. The block ID number (0-based) has to
|
|
be passed for the block to query. The received data contains the
|
|
associated the direction of the block, the first associated group ID
|
|
(0-based) and the number of groups, the name string of the block,
|
|
etc.
|
|
|
|
The direction is either `SNDRV_UMP_DIR_INPUT`,
|
|
`SNDRV_UMP_DIR_OUTPUT` or `SNDRV_UMP_DIR_BIDIRECTION`.
|
|
|
|
* For the device supports UMP v1.1, the UMP MIDI protocol can be
|
|
switched via "Stream Configuration Request" message (UMP type 0x0f,
|
|
status 0x05). When UMP core receives such a message, it updates the
|
|
UMP EP info and the corresponding sequencer clients as well.
|
|
|
|
|
|
Control API Extensions
|
|
======================
|
|
|
|
* The new ioctl `SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE` is introduced for
|
|
querying the next UMP rawmidi device, while the existing ioctl
|
|
`SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE` queries only the legacy
|
|
rawmidi devices.
|
|
|
|
For setting the subdevice (substream number) to be opened, use the
|
|
ioctl `SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE` like the normal
|
|
rawmidi.
|
|
|
|
* Two new ioctls `SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO` and
|
|
`SNDRV_CTL_IOCTL_UMP_BLOCK_INFO` provide the UMP Endpoint and UMP
|
|
Block information of the specified UMP device via ALSA control API
|
|
without opening the actual (UMP) rawmidi device.
|
|
The `card` field is ignored upon inquiry, always tied with the card
|
|
of the control interface.
|
|
|
|
|
|
Sequencer API Extensions
|
|
========================
|
|
|
|
* `midi_version` field is added to `snd_seq_client_info` to indicate
|
|
the current MIDI version (either 0, 1 or 2) of each client.
|
|
When `midi_version` is 1 or 2, the alignment of read from a UMP
|
|
sequencer client is also changed from the former 28 bytes to 32
|
|
bytes for the extended payload. The alignment size for the write
|
|
isn't changed, but each event size may differ depending on the new
|
|
bit flag below.
|
|
|
|
* `SNDRV_SEQ_EVENT_UMP` flag bit is added for each sequencer event
|
|
flags. When this bit flag is set, the sequencer event is extended
|
|
to have a larger payload of 16 bytes instead of the legacy 12
|
|
bytes, and the event contains the UMP packet in the payload.
|
|
|
|
* The new sequencer port type bit (`SNDRV_SEQ_PORT_TYPE_MIDI_UMP`)
|
|
indicates the port being UMP-capable.
|
|
|
|
* The sequencer ports have new capability bits to indicate the
|
|
inactive ports (`SNDRV_SEQ_PORT_CAP_INACTIVE`) and the UMP Endpoint
|
|
port (`SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT`).
|
|
|
|
* The event conversion of ALSA sequencer clients can be suppressed the
|
|
new filter bit `SNDRV_SEQ_FILTER_NO_CONVERT` set to the client info.
|
|
For example, the kernel pass-through client (`snd-seq-dummy`) sets
|
|
this flag internally.
|
|
|
|
* The port information gained the new field `direction` to indicate
|
|
the direction of the port (either `SNDRV_SEQ_PORT_DIR_INPUT`,
|
|
`SNDRV_SEQ_PORT_DIR_OUTPUT` or `SNDRV_SEQ_PORT_DIR_BIDIRECTION`).
|
|
|
|
* Another additional field for the port information is `ump_group`
|
|
which specifies the associated UMP Group Number (1-based).
|
|
When it's non-zero, the UMP group field in the UMP packet updated
|
|
upon delivery to the specified group (corrected to be 0-based).
|
|
Each sequencer port is supposed to set this field if it's a port to
|
|
specific to a certain UMP group.
|
|
|
|
* Each client may set the additional event filter for UMP Groups in
|
|
`group_filter` bitmap. The filter consists of bitmap from 1-based
|
|
Group numbers. For example, when the bit 1 is set, messages from
|
|
Group 1 (i.e. the very first group) are filtered and not delivered.
|
|
The bit 0 is used for filtering UMP groupless messages.
|
|
|
|
* Two new ioctls are added for UMP-capable clients:
|
|
`SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO` and
|
|
`SNDRV_SEQ_IOCTL_SET_CLIENT_UMP_INFO`. They are used to get and set
|
|
either `snd_ump_endpoint_info` or `snd_ump_block_info` data
|
|
associated with the sequencer client. The USB MIDI driver provides
|
|
those information from the underlying UMP rawmidi, while a
|
|
user-space client may provide its own data via `*_SET` ioctl.
|
|
For an Endpoint data, pass 0 to the `type` field, while for a Block
|
|
data, pass the block number + 1 to the `type` field.
|
|
Setting the data for a kernel client shall result in an error.
|
|
|
|
* With UMP 1.1, Function Block information may be changed
|
|
dynamically. When the update of Function Block is received from the
|
|
device, ALSA sequencer core changes the corresponding sequencer port
|
|
name and attributes accordingly, and notifies the changes via the
|
|
announcement to the ALSA sequencer system port, similarly like the
|
|
normal port change notification.
|