3021 lines
79 KiB
C
3021 lines
79 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
|
|
* Ben. Herrenschmidt (benh@kernel.crashing.org)
|
|
*
|
|
* TODO:
|
|
*
|
|
* - Replace mdelay with some schedule loop if possible
|
|
* - Shorten some obfuscated delays on some routines (like modem
|
|
* power)
|
|
* - Refcount some clocks (see darwin)
|
|
* - Split split split...
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/pmu.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/export.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/ohare.h>
|
|
#include <asm/heathrow.h>
|
|
#include <asm/keylargo.h>
|
|
#include <asm/uninorth.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/dbdma.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/pmac_low_i2c.h>
|
|
|
|
#undef DEBUG_FEATURE
|
|
|
|
#ifdef DEBUG_FEATURE
|
|
#define DBG(fmt...) printk(KERN_DEBUG fmt)
|
|
#else
|
|
#define DBG(fmt...)
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_BOOK3S_32
|
|
extern int powersave_lowspeed;
|
|
#endif
|
|
|
|
extern int powersave_nap;
|
|
extern struct device_node *k2_skiplist[2];
|
|
|
|
/*
|
|
* We use a single global lock to protect accesses. Each driver has
|
|
* to take care of its own locking
|
|
*/
|
|
DEFINE_RAW_SPINLOCK(feature_lock);
|
|
|
|
#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags);
|
|
#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags);
|
|
|
|
|
|
/*
|
|
* Instance of some macio stuffs
|
|
*/
|
|
struct macio_chip macio_chips[MAX_MACIO_CHIPS];
|
|
|
|
struct macio_chip *macio_find(struct device_node *child, int type)
|
|
{
|
|
while(child) {
|
|
int i;
|
|
|
|
for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
|
|
if (child == macio_chips[i].of_node &&
|
|
(!type || macio_chips[i].type == type))
|
|
return &macio_chips[i];
|
|
child = child->parent;
|
|
}
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(macio_find);
|
|
|
|
static const char *macio_names[] =
|
|
{
|
|
"Unknown",
|
|
"Grand Central",
|
|
"OHare",
|
|
"OHareII",
|
|
"Heathrow",
|
|
"Gatwick",
|
|
"Paddington",
|
|
"Keylargo",
|
|
"Pangea",
|
|
"Intrepid",
|
|
"K2",
|
|
"Shasta",
|
|
};
|
|
|
|
|
|
struct device_node *uninorth_node;
|
|
u32 __iomem *uninorth_base;
|
|
|
|
static u32 uninorth_rev;
|
|
static int uninorth_maj;
|
|
static void __iomem *u3_ht_base;
|
|
|
|
/*
|
|
* For each motherboard family, we have a table of functions pointers
|
|
* that handle the various features.
|
|
*/
|
|
|
|
typedef long (*feature_call)(struct device_node *node, long param, long value);
|
|
|
|
struct feature_table_entry {
|
|
unsigned int selector;
|
|
feature_call function;
|
|
};
|
|
|
|
struct pmac_mb_def
|
|
{
|
|
const char* model_string;
|
|
const char* model_name;
|
|
int model_id;
|
|
struct feature_table_entry* features;
|
|
unsigned long board_flags;
|
|
};
|
|
static struct pmac_mb_def pmac_mb;
|
|
|
|
/*
|
|
* Here are the chip specific feature functions
|
|
*/
|
|
|
|
static inline int simple_feature_tweak(struct device_node *node, int type,
|
|
int reg, u32 mask, int value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
|
|
macio = macio_find(node, type);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
LOCK(flags);
|
|
if (value)
|
|
MACIO_BIS(reg, mask);
|
|
else
|
|
MACIO_BIC(reg, mask);
|
|
(void)MACIO_IN32(reg);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_PPC64
|
|
|
|
static long ohare_htw_scc_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long chan_mask;
|
|
unsigned long fcr;
|
|
unsigned long flags;
|
|
int htw, trans;
|
|
unsigned long rmask;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
if (of_node_name_eq(node, "ch-a"))
|
|
chan_mask = MACIO_FLAG_SCCA_ON;
|
|
else if (of_node_name_eq(node, "ch-b"))
|
|
chan_mask = MACIO_FLAG_SCCB_ON;
|
|
else
|
|
return -ENODEV;
|
|
|
|
htw = (macio->type == macio_heathrow || macio->type == macio_paddington
|
|
|| macio->type == macio_gatwick);
|
|
/* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
|
|
trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
|
|
pmac_mb.model_id != PMAC_TYPE_YIKES);
|
|
if (value) {
|
|
#ifdef CONFIG_ADB_PMU
|
|
if ((param & 0xfff) == PMAC_SCC_IRDA)
|
|
pmu_enable_irled(1);
|
|
#endif /* CONFIG_ADB_PMU */
|
|
LOCK(flags);
|
|
fcr = MACIO_IN32(OHARE_FCR);
|
|
/* Check if scc cell need enabling */
|
|
if (!(fcr & OH_SCC_ENABLE)) {
|
|
fcr |= OH_SCC_ENABLE;
|
|
if (htw) {
|
|
/* Side effect: this will also power up the
|
|
* modem, but it's too messy to figure out on which
|
|
* ports this controls the transceiver and on which
|
|
* it controls the modem
|
|
*/
|
|
if (trans)
|
|
fcr &= ~HRW_SCC_TRANS_EN_N;
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
fcr |= (rmask = HRW_RESET_SCC);
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
} else {
|
|
fcr |= (rmask = OH_SCC_RESET);
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
}
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(OHARE_FCR);
|
|
mdelay(15);
|
|
LOCK(flags);
|
|
fcr &= ~rmask;
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
}
|
|
if (chan_mask & MACIO_FLAG_SCCA_ON)
|
|
fcr |= OH_SCCA_IO;
|
|
if (chan_mask & MACIO_FLAG_SCCB_ON)
|
|
fcr |= OH_SCCB_IO;
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
macio->flags |= chan_mask;
|
|
UNLOCK(flags);
|
|
if (param & PMAC_SCC_FLAG_XMON)
|
|
macio->flags |= MACIO_FLAG_SCC_LOCKED;
|
|
} else {
|
|
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
|
|
return -EPERM;
|
|
LOCK(flags);
|
|
fcr = MACIO_IN32(OHARE_FCR);
|
|
if (chan_mask & MACIO_FLAG_SCCA_ON)
|
|
fcr &= ~OH_SCCA_IO;
|
|
if (chan_mask & MACIO_FLAG_SCCB_ON)
|
|
fcr &= ~OH_SCCB_IO;
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
|
|
fcr &= ~OH_SCC_ENABLE;
|
|
if (htw && trans)
|
|
fcr |= HRW_SCC_TRANS_EN_N;
|
|
MACIO_OUT32(OHARE_FCR, fcr);
|
|
}
|
|
macio->flags &= ~(chan_mask);
|
|
UNLOCK(flags);
|
|
mdelay(10);
|
|
#ifdef CONFIG_ADB_PMU
|
|
if ((param & 0xfff) == PMAC_SCC_IRDA)
|
|
pmu_enable_irled(0);
|
|
#endif /* CONFIG_ADB_PMU */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long ohare_floppy_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_FLOPPY_ENABLE, value);
|
|
}
|
|
|
|
static long ohare_mesh_enable(struct device_node *node, long param, long value)
|
|
{
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_MESH_ENABLE, value);
|
|
}
|
|
|
|
static long ohare_ide_enable(struct device_node *node, long param, long value)
|
|
{
|
|
switch(param) {
|
|
case 0:
|
|
/* For some reason, setting the bit in set_initial_features()
|
|
* doesn't stick. I'm still investigating... --BenH.
|
|
*/
|
|
if (value)
|
|
simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_IOBUS_ENABLE, 1);
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_IDE0_ENABLE, value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_BAY_IDE_ENABLE, value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long ohare_ide_reset(struct device_node *node, long param, long value)
|
|
{
|
|
switch(param) {
|
|
case 0:
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_IDE0_RESET_N, !value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_ohare,
|
|
OHARE_FCR, OH_IDE1_RESET_N, !value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long ohare_sleep_state(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio = &macio_chips[0];
|
|
|
|
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
|
|
return -EPERM;
|
|
if (value == 1) {
|
|
MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
|
|
} else if (value == 0) {
|
|
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long heathrow_modem_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
u8 gpio;
|
|
unsigned long flags;
|
|
|
|
macio = macio_find(node, macio_unknown);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
|
|
if (!value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
|
|
mdelay(250);
|
|
}
|
|
if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
|
|
pmac_mb.model_id != PMAC_TYPE_YIKES) {
|
|
LOCK(flags);
|
|
if (value)
|
|
MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
|
|
else
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
mdelay(250);
|
|
}
|
|
if (value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
|
|
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
|
|
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
|
|
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long heathrow_floppy_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
HEATHROW_FCR,
|
|
HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
|
|
value);
|
|
}
|
|
|
|
static long heathrow_mesh_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
|
|
macio = macio_find(node, macio_unknown);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
LOCK(flags);
|
|
/* Set clear mesh cell enable */
|
|
if (value)
|
|
MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
|
|
else
|
|
MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
udelay(10);
|
|
/* Set/Clear termination power */
|
|
if (value)
|
|
MACIO_BIC(HEATHROW_MBCR, 0x04000000);
|
|
else
|
|
MACIO_BIS(HEATHROW_MBCR, 0x04000000);
|
|
(void)MACIO_IN32(HEATHROW_MBCR);
|
|
udelay(10);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long heathrow_ide_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
switch(param) {
|
|
case 0:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
HEATHROW_FCR, HRW_IDE0_ENABLE, value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long heathrow_ide_reset(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
switch(param) {
|
|
case 0:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long heathrow_bmac_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
if (value) {
|
|
LOCK(flags);
|
|
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
|
|
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
mdelay(10);
|
|
LOCK(flags);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
mdelay(10);
|
|
} else {
|
|
LOCK(flags);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
|
|
UNLOCK(flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long heathrow_sound_enable(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
|
|
/* B&W G3 and Yikes don't support that properly (the
|
|
* sound appear to never come back after being shut down).
|
|
*/
|
|
if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
|
|
pmac_mb.model_id == PMAC_TYPE_YIKES)
|
|
return 0;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
if (value) {
|
|
LOCK(flags);
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
} else {
|
|
LOCK(flags);
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
|
|
UNLOCK(flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32 save_fcr[6];
|
|
static u32 save_mbcr;
|
|
static struct dbdma_regs save_dbdma[13];
|
|
static struct dbdma_regs save_alt_dbdma[13];
|
|
|
|
static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
|
|
{
|
|
int i;
|
|
|
|
/* Save state & config of DBDMA channels */
|
|
for (i = 0; i < 13; i++) {
|
|
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
|
|
(macio->base + ((0x8000+i*0x100)>>2));
|
|
save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
|
|
save[i].cmdptr = in_le32(&chan->cmdptr);
|
|
save[i].intr_sel = in_le32(&chan->intr_sel);
|
|
save[i].br_sel = in_le32(&chan->br_sel);
|
|
save[i].wait_sel = in_le32(&chan->wait_sel);
|
|
}
|
|
}
|
|
|
|
static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
|
|
{
|
|
int i;
|
|
|
|
/* Save state & config of DBDMA channels */
|
|
for (i = 0; i < 13; i++) {
|
|
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
|
|
(macio->base + ((0x8000+i*0x100)>>2));
|
|
out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
|
|
while (in_le32(&chan->status) & ACTIVE)
|
|
mb();
|
|
out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
|
|
out_le32(&chan->cmdptr, save[i].cmdptr);
|
|
out_le32(&chan->intr_sel, save[i].intr_sel);
|
|
out_le32(&chan->br_sel, save[i].br_sel);
|
|
out_le32(&chan->wait_sel, save[i].wait_sel);
|
|
}
|
|
}
|
|
|
|
static void heathrow_sleep(struct macio_chip *macio, int secondary)
|
|
{
|
|
if (secondary) {
|
|
dbdma_save(macio, save_alt_dbdma);
|
|
save_fcr[2] = MACIO_IN32(0x38);
|
|
save_fcr[3] = MACIO_IN32(0x3c);
|
|
} else {
|
|
dbdma_save(macio, save_dbdma);
|
|
save_fcr[0] = MACIO_IN32(0x38);
|
|
save_fcr[1] = MACIO_IN32(0x3c);
|
|
save_mbcr = MACIO_IN32(0x34);
|
|
/* Make sure sound is shut down */
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
|
|
/* This seems to be necessary as well or the fan
|
|
* keeps coming up and battery drains fast */
|
|
MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
|
|
/* Make sure eth is down even if module or sleep
|
|
* won't work properly */
|
|
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
|
|
}
|
|
/* Make sure modem is shut down */
|
|
MACIO_OUT8(HRW_GPIO_MODEM_RESET,
|
|
MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
|
|
MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
|
|
|
|
/* Let things settle */
|
|
(void)MACIO_IN32(HEATHROW_FCR);
|
|
}
|
|
|
|
static void heathrow_wakeup(struct macio_chip *macio, int secondary)
|
|
{
|
|
if (secondary) {
|
|
MACIO_OUT32(0x38, save_fcr[2]);
|
|
(void)MACIO_IN32(0x38);
|
|
mdelay(1);
|
|
MACIO_OUT32(0x3c, save_fcr[3]);
|
|
(void)MACIO_IN32(0x38);
|
|
mdelay(10);
|
|
dbdma_restore(macio, save_alt_dbdma);
|
|
} else {
|
|
MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
|
|
(void)MACIO_IN32(0x38);
|
|
mdelay(1);
|
|
MACIO_OUT32(0x3c, save_fcr[1]);
|
|
(void)MACIO_IN32(0x38);
|
|
mdelay(1);
|
|
MACIO_OUT32(0x34, save_mbcr);
|
|
(void)MACIO_IN32(0x38);
|
|
mdelay(10);
|
|
dbdma_restore(macio, save_dbdma);
|
|
}
|
|
}
|
|
|
|
static long heathrow_sleep_state(struct device_node *node, long param,
|
|
long value)
|
|
{
|
|
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
|
|
return -EPERM;
|
|
if (value == 1) {
|
|
if (macio_chips[1].type == macio_gatwick)
|
|
heathrow_sleep(&macio_chips[0], 1);
|
|
heathrow_sleep(&macio_chips[0], 0);
|
|
} else if (value == 0) {
|
|
heathrow_wakeup(&macio_chips[0], 0);
|
|
if (macio_chips[1].type == macio_gatwick)
|
|
heathrow_wakeup(&macio_chips[0], 1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long core99_scc_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
unsigned long chan_mask;
|
|
u32 fcr;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
if (of_node_name_eq(node, "ch-a"))
|
|
chan_mask = MACIO_FLAG_SCCA_ON;
|
|
else if (of_node_name_eq(node, "ch-b"))
|
|
chan_mask = MACIO_FLAG_SCCB_ON;
|
|
else
|
|
return -ENODEV;
|
|
|
|
if (value) {
|
|
int need_reset_scc = 0;
|
|
int need_reset_irda = 0;
|
|
|
|
LOCK(flags);
|
|
fcr = MACIO_IN32(KEYLARGO_FCR0);
|
|
/* Check if scc cell need enabling */
|
|
if (!(fcr & KL0_SCC_CELL_ENABLE)) {
|
|
fcr |= KL0_SCC_CELL_ENABLE;
|
|
need_reset_scc = 1;
|
|
}
|
|
if (chan_mask & MACIO_FLAG_SCCA_ON) {
|
|
fcr |= KL0_SCCA_ENABLE;
|
|
/* Don't enable line drivers for I2S modem */
|
|
if ((param & 0xfff) == PMAC_SCC_I2S1)
|
|
fcr &= ~KL0_SCC_A_INTF_ENABLE;
|
|
else
|
|
fcr |= KL0_SCC_A_INTF_ENABLE;
|
|
}
|
|
if (chan_mask & MACIO_FLAG_SCCB_ON) {
|
|
fcr |= KL0_SCCB_ENABLE;
|
|
/* Perform irda specific inits */
|
|
if ((param & 0xfff) == PMAC_SCC_IRDA) {
|
|
fcr &= ~KL0_SCC_B_INTF_ENABLE;
|
|
fcr |= KL0_IRDA_ENABLE;
|
|
fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
|
|
fcr |= KL0_IRDA_SOURCE1_SEL;
|
|
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
|
|
fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
|
|
need_reset_irda = 1;
|
|
} else
|
|
fcr |= KL0_SCC_B_INTF_ENABLE;
|
|
}
|
|
MACIO_OUT32(KEYLARGO_FCR0, fcr);
|
|
macio->flags |= chan_mask;
|
|
if (need_reset_scc) {
|
|
MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
UNLOCK(flags);
|
|
mdelay(15);
|
|
LOCK(flags);
|
|
MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
|
|
}
|
|
if (need_reset_irda) {
|
|
MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
UNLOCK(flags);
|
|
mdelay(15);
|
|
LOCK(flags);
|
|
MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
|
|
}
|
|
UNLOCK(flags);
|
|
if (param & PMAC_SCC_FLAG_XMON)
|
|
macio->flags |= MACIO_FLAG_SCC_LOCKED;
|
|
} else {
|
|
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
|
|
return -EPERM;
|
|
LOCK(flags);
|
|
fcr = MACIO_IN32(KEYLARGO_FCR0);
|
|
if (chan_mask & MACIO_FLAG_SCCA_ON)
|
|
fcr &= ~KL0_SCCA_ENABLE;
|
|
if (chan_mask & MACIO_FLAG_SCCB_ON) {
|
|
fcr &= ~KL0_SCCB_ENABLE;
|
|
/* Perform irda specific clears */
|
|
if ((param & 0xfff) == PMAC_SCC_IRDA) {
|
|
fcr &= ~KL0_IRDA_ENABLE;
|
|
fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
|
|
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
|
|
fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
|
|
}
|
|
}
|
|
MACIO_OUT32(KEYLARGO_FCR0, fcr);
|
|
if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
|
|
fcr &= ~KL0_SCC_CELL_ENABLE;
|
|
MACIO_OUT32(KEYLARGO_FCR0, fcr);
|
|
}
|
|
macio->flags &= ~(chan_mask);
|
|
UNLOCK(flags);
|
|
mdelay(10);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_modem_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
u8 gpio;
|
|
unsigned long flags;
|
|
|
|
/* Hack for internal USB modem */
|
|
if (node == NULL) {
|
|
if (macio_chips[0].type != macio_keylargo)
|
|
return -ENODEV;
|
|
node = macio_chips[0].of_node;
|
|
}
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
|
|
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
|
|
|
|
if (!value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
mdelay(250);
|
|
}
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2);
|
|
mdelay(250);
|
|
} else {
|
|
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
|
|
UNLOCK(flags);
|
|
}
|
|
if (value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
pangea_modem_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
u8 gpio;
|
|
unsigned long flags;
|
|
|
|
/* Hack for internal USB modem */
|
|
if (node == NULL) {
|
|
if (macio_chips[0].type != macio_pangea &&
|
|
macio_chips[0].type != macio_intrepid)
|
|
return -ENODEV;
|
|
node = macio_chips[0].of_node;
|
|
}
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
|
|
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
|
|
|
|
if (!value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
mdelay(250);
|
|
}
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_OUT8(KL_GPIO_MODEM_POWER,
|
|
KEYLARGO_GPIO_OUTPUT_ENABLE);
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2);
|
|
mdelay(250);
|
|
} else {
|
|
MACIO_OUT8(KL_GPIO_MODEM_POWER,
|
|
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
UNLOCK(flags);
|
|
}
|
|
if (value) {
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250); LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
|
|
UNLOCK(flags); mdelay(250);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_ata100_enable(struct device_node *node, long value)
|
|
{
|
|
unsigned long flags;
|
|
struct pci_dev *pdev = NULL;
|
|
u8 pbus, pid;
|
|
int rc;
|
|
|
|
if (uninorth_rev < 0x24)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (value)
|
|
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
|
|
else
|
|
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
|
|
(void)UN_IN(UNI_N_CLOCK_CNTL);
|
|
UNLOCK(flags);
|
|
udelay(20);
|
|
|
|
if (value) {
|
|
if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
|
|
pdev = pci_get_domain_bus_and_slot(0, pbus, pid);
|
|
if (pdev == NULL)
|
|
return 0;
|
|
rc = pci_enable_device(pdev);
|
|
if (rc == 0)
|
|
pci_set_master(pdev);
|
|
pci_dev_put(pdev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_ide_enable(struct device_node *node, long param, long value)
|
|
{
|
|
/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
|
|
* based ata-100
|
|
*/
|
|
switch(param) {
|
|
case 0:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
|
|
case 2:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
|
|
case 3:
|
|
return core99_ata100_enable(node, value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long
|
|
core99_ide_reset(struct device_node *node, long param, long value)
|
|
{
|
|
switch(param) {
|
|
case 0:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
|
|
case 1:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
|
|
case 2:
|
|
return simple_feature_tweak(node, macio_unknown,
|
|
KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
static long
|
|
core99_gmac_enable(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
LOCK(flags);
|
|
if (value)
|
|
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
|
|
else
|
|
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
|
|
(void)UN_IN(UNI_N_CLOCK_CNTL);
|
|
UNLOCK(flags);
|
|
udelay(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_gmac_phy_reset(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
struct macio_chip *macio;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
|
|
(void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
|
|
UNLOCK(flags);
|
|
mdelay(10);
|
|
LOCK(flags);
|
|
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
|
|
KEYLARGO_GPIO_OUTOUT_DATA);
|
|
UNLOCK(flags);
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_sound_chip_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
|
|
/* Do a better probe code, screamer G4 desktops &
|
|
* iMacs can do that too, add a recalibrate in
|
|
* the driver as well
|
|
*/
|
|
if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
|
|
pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
|
|
LOCK(flags);
|
|
if (value)
|
|
MACIO_OUT8(KL_GPIO_SOUND_POWER,
|
|
KEYLARGO_GPIO_OUTPUT_ENABLE |
|
|
KEYLARGO_GPIO_OUTOUT_DATA);
|
|
else
|
|
MACIO_OUT8(KL_GPIO_SOUND_POWER,
|
|
KEYLARGO_GPIO_OUTPUT_ENABLE);
|
|
(void)MACIO_IN8(KL_GPIO_SOUND_POWER);
|
|
UNLOCK(flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_airport_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip* macio;
|
|
unsigned long flags;
|
|
int state;
|
|
|
|
macio = macio_find(node, 0);
|
|
if (!macio)
|
|
return -ENODEV;
|
|
|
|
/* Hint: we allow passing of macio itself for the sake of the
|
|
* sleep code
|
|
*/
|
|
if (node != macio->of_node &&
|
|
(!node->parent || node->parent != macio->of_node))
|
|
return -ENODEV;
|
|
state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
|
|
if (value == state)
|
|
return 0;
|
|
if (value) {
|
|
/* This code is a reproduction of OF enable-cardslot
|
|
* and init-wireless methods, slightly hacked until
|
|
* I got it working.
|
|
*/
|
|
LOCK(flags);
|
|
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
|
|
UNLOCK(flags);
|
|
mdelay(10);
|
|
LOCK(flags);
|
|
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
|
|
UNLOCK(flags);
|
|
|
|
mdelay(10);
|
|
|
|
LOCK(flags);
|
|
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2);
|
|
udelay(10);
|
|
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
|
|
udelay(10);
|
|
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
|
|
udelay(10);
|
|
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
|
|
udelay(10);
|
|
MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
|
|
udelay(10);
|
|
MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
|
|
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
|
|
UNLOCK(flags);
|
|
udelay(10);
|
|
MACIO_OUT32(0x1c000, 0);
|
|
mdelay(1);
|
|
MACIO_OUT8(0x1a3e0, 0x41);
|
|
(void)MACIO_IN8(0x1a3e0);
|
|
udelay(10);
|
|
LOCK(flags);
|
|
MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2);
|
|
UNLOCK(flags);
|
|
mdelay(100);
|
|
|
|
macio->flags |= MACIO_FLAG_AIRPORT_ON;
|
|
} else {
|
|
LOCK(flags);
|
|
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2);
|
|
MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
|
|
MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
|
|
MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
|
|
MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
|
|
MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
|
|
(void)MACIO_IN8(KL_GPIO_AIRPORT_4);
|
|
UNLOCK(flags);
|
|
|
|
macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static long
|
|
core99_reset_cpu(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned int reset_io = 0;
|
|
unsigned long flags;
|
|
struct macio_chip *macio;
|
|
struct device_node *np;
|
|
const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
|
|
KL_GPIO_RESET_CPU1,
|
|
KL_GPIO_RESET_CPU2,
|
|
KL_GPIO_RESET_CPU3 };
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo)
|
|
return -ENODEV;
|
|
|
|
for_each_of_cpu_node(np) {
|
|
const u32 *rst = of_get_property(np, "soft-reset", NULL);
|
|
if (!rst)
|
|
continue;
|
|
if (param == of_get_cpu_hwid(np, 0)) {
|
|
of_node_put(np);
|
|
reset_io = *rst;
|
|
break;
|
|
}
|
|
}
|
|
if (np == NULL || reset_io == 0)
|
|
reset_io = dflt_reset_lines[param];
|
|
|
|
LOCK(flags);
|
|
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
|
|
(void)MACIO_IN8(reset_io);
|
|
udelay(1);
|
|
MACIO_OUT8(reset_io, 0);
|
|
(void)MACIO_IN8(reset_io);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
|
|
static long
|
|
core99_usb_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio;
|
|
unsigned long flags;
|
|
const char *prop;
|
|
int number;
|
|
u32 reg;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
|
|
prop = of_get_property(node, "AAPL,clock-id", NULL);
|
|
if (!prop)
|
|
return -ENODEV;
|
|
if (strncmp(prop, "usb0u048", 8) == 0)
|
|
number = 0;
|
|
else if (strncmp(prop, "usb1u148", 8) == 0)
|
|
number = 2;
|
|
else if (strncmp(prop, "usb2u248", 8) == 0)
|
|
number = 4;
|
|
else
|
|
return -ENODEV;
|
|
|
|
/* Sorry for the brute-force locking, but this is only used during
|
|
* sleep and the timing seem to be critical
|
|
*/
|
|
LOCK(flags);
|
|
if (value) {
|
|
/* Turn ON */
|
|
if (number == 0) {
|
|
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
UNLOCK(flags);
|
|
mdelay(1);
|
|
LOCK(flags);
|
|
MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
|
|
} else if (number == 2) {
|
|
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
mdelay(1);
|
|
LOCK(flags);
|
|
MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
|
|
} else if (number == 4) {
|
|
MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
|
|
UNLOCK(flags);
|
|
(void)MACIO_IN32(KEYLARGO_FCR1);
|
|
mdelay(1);
|
|
LOCK(flags);
|
|
MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
|
|
}
|
|
if (number < 4) {
|
|
reg = MACIO_IN32(KEYLARGO_FCR4);
|
|
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
|
|
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
|
|
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
|
|
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
|
|
MACIO_OUT32(KEYLARGO_FCR4, reg);
|
|
(void)MACIO_IN32(KEYLARGO_FCR4);
|
|
udelay(10);
|
|
} else {
|
|
reg = MACIO_IN32(KEYLARGO_FCR3);
|
|
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
|
|
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
|
|
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
|
|
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
|
|
MACIO_OUT32(KEYLARGO_FCR3, reg);
|
|
(void)MACIO_IN32(KEYLARGO_FCR3);
|
|
udelay(10);
|
|
}
|
|
if (macio->type == macio_intrepid) {
|
|
/* wait for clock stopped bits to clear */
|
|
u32 test0 = 0, test1 = 0;
|
|
u32 status0, status1;
|
|
int timeout = 1000;
|
|
|
|
UNLOCK(flags);
|
|
switch (number) {
|
|
case 0:
|
|
test0 = UNI_N_CLOCK_STOPPED_USB0;
|
|
test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
|
|
break;
|
|
case 2:
|
|
test0 = UNI_N_CLOCK_STOPPED_USB1;
|
|
test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
|
|
break;
|
|
case 4:
|
|
test0 = UNI_N_CLOCK_STOPPED_USB2;
|
|
test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
|
|
break;
|
|
}
|
|
do {
|
|
if (--timeout <= 0) {
|
|
printk(KERN_ERR "core99_usb_enable: "
|
|
"Timeout waiting for clocks\n");
|
|
break;
|
|
}
|
|
mdelay(1);
|
|
status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
|
|
status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
|
|
} while ((status0 & test0) | (status1 & test1));
|
|
LOCK(flags);
|
|
}
|
|
} else {
|
|
/* Turn OFF */
|
|
if (number < 4) {
|
|
reg = MACIO_IN32(KEYLARGO_FCR4);
|
|
reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
|
|
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
|
|
reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
|
|
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
|
|
MACIO_OUT32(KEYLARGO_FCR4, reg);
|
|
(void)MACIO_IN32(KEYLARGO_FCR4);
|
|
udelay(1);
|
|
} else {
|
|
reg = MACIO_IN32(KEYLARGO_FCR3);
|
|
reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
|
|
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
|
|
reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
|
|
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
|
|
MACIO_OUT32(KEYLARGO_FCR3, reg);
|
|
(void)MACIO_IN32(KEYLARGO_FCR3);
|
|
udelay(1);
|
|
}
|
|
if (number == 0) {
|
|
if (macio->type != macio_intrepid)
|
|
MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
udelay(1);
|
|
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
} else if (number == 2) {
|
|
if (macio->type != macio_intrepid)
|
|
MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
udelay(1);
|
|
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
} else if (number == 4) {
|
|
udelay(1);
|
|
MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
|
|
(void)MACIO_IN32(KEYLARGO_FCR1);
|
|
}
|
|
udelay(1);
|
|
}
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_firewire_enable(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
struct macio_chip *macio;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (value) {
|
|
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
|
|
(void)UN_IN(UNI_N_CLOCK_CNTL);
|
|
} else {
|
|
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
|
|
(void)UN_IN(UNI_N_CLOCK_CNTL);
|
|
}
|
|
UNLOCK(flags);
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
core99_firewire_cable_power(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
struct macio_chip *macio;
|
|
|
|
/* Trick: we allow NULL node */
|
|
if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
|
|
return -ENODEV;
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
|
|
MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
|
|
udelay(10);
|
|
} else {
|
|
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
|
|
MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
|
|
}
|
|
UNLOCK(flags);
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
intrepid_aack_delay_enable(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (uninorth_rev < 0xd2)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (param)
|
|
UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
|
|
else
|
|
UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
static long
|
|
core99_read_gpio(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
|
|
return MACIO_IN8(param);
|
|
}
|
|
|
|
|
|
static long
|
|
core99_write_gpio(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
|
|
MACIO_OUT8(param, (u8)(value & 0xff));
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PPC64
|
|
static long g5_gmac_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
unsigned long flags;
|
|
|
|
if (node == NULL)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
|
|
mb();
|
|
k2_skiplist[0] = NULL;
|
|
} else {
|
|
k2_skiplist[0] = node;
|
|
mb();
|
|
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
|
|
}
|
|
|
|
UNLOCK(flags);
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long g5_fw_enable(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
unsigned long flags;
|
|
|
|
if (node == NULL)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
|
|
mb();
|
|
k2_skiplist[1] = NULL;
|
|
} else {
|
|
k2_skiplist[1] = node;
|
|
mb();
|
|
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
|
|
}
|
|
|
|
UNLOCK(flags);
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long g5_mpic_enable(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned long flags;
|
|
struct device_node *parent = of_get_parent(node);
|
|
int is_u3;
|
|
|
|
if (parent == NULL)
|
|
return 0;
|
|
is_u3 = of_node_name_eq(parent, "u3") || of_node_name_eq(parent, "u4");
|
|
of_node_put(parent);
|
|
if (!is_u3)
|
|
return 0;
|
|
|
|
LOCK(flags);
|
|
UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long g5_eth_phy_reset(struct device_node *node, long param, long value)
|
|
{
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
struct device_node *phy;
|
|
int need_reset;
|
|
|
|
/*
|
|
* We must not reset the combo PHYs, only the BCM5221 found in
|
|
* the iMac G5.
|
|
*/
|
|
phy = of_get_next_child(node, NULL);
|
|
if (!phy)
|
|
return -ENODEV;
|
|
need_reset = of_device_is_compatible(phy, "B5221");
|
|
of_node_put(phy);
|
|
if (!need_reset)
|
|
return 0;
|
|
|
|
/* PHY reset is GPIO 29, not in device-tree unfortunately */
|
|
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
|
|
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
|
|
/* Thankfully, this is now always called at a time when we can
|
|
* schedule by sungem.
|
|
*/
|
|
msleep(10);
|
|
MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long g5_i2s_enable(struct device_node *node, long param, long value)
|
|
{
|
|
/* Very crude implementation for now */
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
unsigned long flags;
|
|
int cell;
|
|
u32 fcrs[3][3] = {
|
|
{ 0,
|
|
K2_FCR1_I2S0_CELL_ENABLE |
|
|
K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
|
|
KL3_I2S0_CLK18_ENABLE
|
|
},
|
|
{ KL0_SCC_A_INTF_ENABLE,
|
|
K2_FCR1_I2S1_CELL_ENABLE |
|
|
K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
|
|
KL3_I2S1_CLK18_ENABLE
|
|
},
|
|
{ KL0_SCC_B_INTF_ENABLE,
|
|
SH_FCR1_I2S2_CELL_ENABLE |
|
|
SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
|
|
SH_FCR3_I2S2_CLK18_ENABLE
|
|
},
|
|
};
|
|
|
|
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
|
|
return -ENODEV;
|
|
if (strncmp(node->name, "i2s-", 4))
|
|
return -ENODEV;
|
|
cell = node->name[4] - 'a';
|
|
switch(cell) {
|
|
case 0:
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
if (macio->type == macio_shasta)
|
|
break;
|
|
fallthrough;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
LOCK(flags);
|
|
if (value) {
|
|
MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
|
|
MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
|
|
MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
|
|
} else {
|
|
MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
|
|
MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
|
|
MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
|
|
}
|
|
udelay(10);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
static long g5_reset_cpu(struct device_node *node, long param, long value)
|
|
{
|
|
unsigned int reset_io = 0;
|
|
unsigned long flags;
|
|
struct macio_chip *macio;
|
|
struct device_node *np;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
|
|
return -ENODEV;
|
|
|
|
for_each_of_cpu_node(np) {
|
|
const u32 *rst = of_get_property(np, "soft-reset", NULL);
|
|
if (!rst)
|
|
continue;
|
|
if (param == of_get_cpu_hwid(np, 0)) {
|
|
of_node_put(np);
|
|
reset_io = *rst;
|
|
break;
|
|
}
|
|
}
|
|
if (np == NULL || reset_io == 0)
|
|
return -ENODEV;
|
|
|
|
LOCK(flags);
|
|
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
|
|
(void)MACIO_IN8(reset_io);
|
|
udelay(1);
|
|
MACIO_OUT8(reset_io, 0);
|
|
(void)MACIO_IN8(reset_io);
|
|
UNLOCK(flags);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/*
|
|
* This can be called from pmac_smp so isn't static
|
|
*
|
|
* This takes the second CPU off the bus on dual CPU machines
|
|
* running UP
|
|
*/
|
|
void __init g5_phy_disable_cpu1(void)
|
|
{
|
|
if (uninorth_maj == 3)
|
|
UN_OUT(U3_API_PHY_CONFIG_1, 0);
|
|
}
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
#ifndef CONFIG_PPC64
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
static u32 save_gpio_levels[2];
|
|
static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
|
|
static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
|
|
static u32 save_unin_clock_ctl;
|
|
|
|
static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
|
|
{
|
|
u32 temp;
|
|
|
|
if (sleep_mode) {
|
|
mdelay(1);
|
|
MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
mdelay(1);
|
|
}
|
|
|
|
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
|
|
KL0_SCC_CELL_ENABLE |
|
|
KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
|
|
KL0_IRDA_CLK19_ENABLE);
|
|
|
|
MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
|
|
MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
|
|
|
|
MACIO_BIC(KEYLARGO_FCR1,
|
|
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
|
|
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
|
|
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
|
|
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
|
|
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
|
|
KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
|
|
KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
|
|
KL1_UIDE_ENABLE);
|
|
|
|
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
|
|
MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
|
|
|
|
temp = MACIO_IN32(KEYLARGO_FCR3);
|
|
if (macio->rev >= 2) {
|
|
temp |= KL3_SHUTDOWN_PLL2X;
|
|
if (sleep_mode)
|
|
temp |= KL3_SHUTDOWN_PLL_TOTAL;
|
|
}
|
|
|
|
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
|
|
KL3_SHUTDOWN_PLLKW35;
|
|
if (sleep_mode)
|
|
temp |= KL3_SHUTDOWN_PLLKW12;
|
|
temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
|
|
| KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
|
|
if (sleep_mode)
|
|
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
|
|
MACIO_OUT32(KEYLARGO_FCR3, temp);
|
|
|
|
/* Flush posted writes & wait a bit */
|
|
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
|
|
}
|
|
|
|
static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
|
|
{
|
|
u32 temp;
|
|
|
|
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
|
|
KL0_SCC_CELL_ENABLE |
|
|
KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
|
|
|
|
MACIO_BIC(KEYLARGO_FCR1,
|
|
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
|
|
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
|
|
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
|
|
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
|
|
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
|
|
KL1_UIDE_ENABLE);
|
|
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
|
|
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
|
|
|
|
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
|
|
|
|
temp = MACIO_IN32(KEYLARGO_FCR3);
|
|
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
|
|
KL3_SHUTDOWN_PLLKW35;
|
|
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
|
|
| KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
|
|
if (sleep_mode)
|
|
temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
|
|
MACIO_OUT32(KEYLARGO_FCR3, temp);
|
|
|
|
/* Flush posted writes & wait a bit */
|
|
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
|
|
}
|
|
|
|
static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
|
|
{
|
|
u32 temp;
|
|
|
|
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
|
|
KL0_SCC_CELL_ENABLE);
|
|
|
|
MACIO_BIC(KEYLARGO_FCR1,
|
|
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
|
|
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
|
|
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
|
|
KL1_EIDE0_ENABLE);
|
|
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
|
|
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
|
|
|
|
temp = MACIO_IN32(KEYLARGO_FCR3);
|
|
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
|
|
KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
|
|
if (sleep_mode)
|
|
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
|
|
MACIO_OUT32(KEYLARGO_FCR3, temp);
|
|
|
|
/* Flush posted writes & wait a bit */
|
|
(void)MACIO_IN32(KEYLARGO_FCR0);
|
|
mdelay(10);
|
|
}
|
|
|
|
|
|
static int
|
|
core99_sleep(void)
|
|
{
|
|
struct macio_chip *macio;
|
|
int i;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
|
|
/* We power off the wireless slot in case it was not done
|
|
* by the driver. We don't power it on automatically however
|
|
*/
|
|
if (macio->flags & MACIO_FLAG_AIRPORT_ON)
|
|
core99_airport_enable(macio->of_node, 0, 0);
|
|
|
|
/* We power off the FW cable. Should be done by the driver... */
|
|
if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
|
|
core99_firewire_enable(NULL, 0, 0);
|
|
core99_firewire_cable_power(NULL, 0, 0);
|
|
}
|
|
|
|
/* We make sure int. modem is off (in case driver lost it) */
|
|
if (macio->type == macio_keylargo)
|
|
core99_modem_enable(macio->of_node, 0, 0);
|
|
else
|
|
pangea_modem_enable(macio->of_node, 0, 0);
|
|
|
|
/* We make sure the sound is off as well */
|
|
core99_sound_chip_enable(macio->of_node, 0, 0);
|
|
|
|
/*
|
|
* Save various bits of KeyLargo
|
|
*/
|
|
|
|
/* Save the state of the various GPIOs */
|
|
save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
|
|
save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
|
|
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
|
|
save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
|
|
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
|
|
save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
|
|
|
|
/* Save the FCRs */
|
|
if (macio->type == macio_keylargo)
|
|
save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
|
|
save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
|
|
save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
|
|
save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
|
|
save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
|
|
save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
|
|
if (macio->type == macio_pangea || macio->type == macio_intrepid)
|
|
save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
|
|
|
|
/* Save state & config of DBDMA channels */
|
|
dbdma_save(macio, save_dbdma);
|
|
|
|
/*
|
|
* Turn off as much as we can
|
|
*/
|
|
if (macio->type == macio_pangea)
|
|
pangea_shutdown(macio, 1);
|
|
else if (macio->type == macio_intrepid)
|
|
intrepid_shutdown(macio, 1);
|
|
else if (macio->type == macio_keylargo)
|
|
keylargo_shutdown(macio, 1);
|
|
|
|
/*
|
|
* Put the host bridge to sleep
|
|
*/
|
|
|
|
save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
|
|
/* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
|
|
* enabled !
|
|
*/
|
|
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
|
|
~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
|
|
udelay(100);
|
|
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
|
|
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
|
|
mdelay(10);
|
|
|
|
/*
|
|
* FIXME: A bit of black magic with OpenPIC (don't ask me why)
|
|
*/
|
|
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
|
|
MACIO_BIS(0x506e0, 0x00400000);
|
|
MACIO_BIS(0x506e0, 0x80000000);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
core99_wake_up(void)
|
|
{
|
|
struct macio_chip *macio;
|
|
int i;
|
|
|
|
macio = &macio_chips[0];
|
|
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
|
|
macio->type != macio_intrepid)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Wakeup the host bridge
|
|
*/
|
|
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
|
|
udelay(10);
|
|
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
|
|
udelay(10);
|
|
|
|
/*
|
|
* Restore KeyLargo
|
|
*/
|
|
|
|
if (macio->type == macio_keylargo) {
|
|
MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
|
|
(void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
|
|
}
|
|
MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
|
|
MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
|
|
MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
|
|
MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
|
|
MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
|
|
if (macio->type == macio_pangea || macio->type == macio_intrepid) {
|
|
MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
|
|
(void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
|
|
}
|
|
|
|
dbdma_restore(macio, save_dbdma);
|
|
|
|
MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
|
|
MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
|
|
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
|
|
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
|
|
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
|
|
MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
|
|
|
|
/* FIXME more black magic with OpenPIC ... */
|
|
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
|
|
MACIO_BIC(0x506e0, 0x00400000);
|
|
MACIO_BIC(0x506e0, 0x80000000);
|
|
}
|
|
|
|
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
|
|
udelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static long
|
|
core99_sleep_state(struct device_node *node, long param, long value)
|
|
{
|
|
/* Param == 1 means to enter the "fake sleep" mode that is
|
|
* used for CPU speed switch
|
|
*/
|
|
if (param == 1) {
|
|
if (value == 1) {
|
|
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
|
|
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
|
|
} else {
|
|
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
|
|
udelay(10);
|
|
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
|
|
udelay(10);
|
|
}
|
|
return 0;
|
|
}
|
|
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
|
|
return -EPERM;
|
|
|
|
#ifdef CONFIG_PM
|
|
if (value == 1)
|
|
return core99_sleep();
|
|
else if (value == 0)
|
|
return core99_wake_up();
|
|
|
|
#endif /* CONFIG_PM */
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
static long
|
|
generic_dev_can_wake(struct device_node *node, long param, long value)
|
|
{
|
|
/* Todo: eventually check we are really dealing with on-board
|
|
* video device ...
|
|
*/
|
|
|
|
if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
|
|
pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
|
|
return 0;
|
|
}
|
|
|
|
static long generic_get_mb_info(struct device_node *node, long param, long value)
|
|
{
|
|
switch(param) {
|
|
case PMAC_MB_INFO_MODEL:
|
|
return pmac_mb.model_id;
|
|
case PMAC_MB_INFO_FLAGS:
|
|
return pmac_mb.board_flags;
|
|
case PMAC_MB_INFO_NAME:
|
|
/* hack hack hack... but should work */
|
|
*((const char **)value) = pmac_mb.model_name;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
/*
|
|
* Table definitions
|
|
*/
|
|
|
|
/* Used on any machine
|
|
*/
|
|
static struct feature_table_entry any_features[] = {
|
|
{ PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
|
|
{ PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
#ifndef CONFIG_PPC64
|
|
|
|
/* OHare based motherboards. Currently, we only use these on the
|
|
* 2400,3400 and 3500 series powerbooks. Some older desktops seem
|
|
* to have issues with turning on/off those asic cells
|
|
*/
|
|
static struct feature_table_entry ohare_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
|
|
{ PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
|
|
{ PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
|
|
{ PMAC_FTR_IDE_RESET, ohare_ide_reset},
|
|
{ PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Heathrow desktop machines (Beige G3).
|
|
* Separated as some features couldn't be properly tested
|
|
* and the serial port control bits appear to confuse it.
|
|
*/
|
|
static struct feature_table_entry heathrow_desktop_features[] = {
|
|
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
|
|
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
|
|
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Heathrow based laptop, that is the Wallstreet and mainstreet
|
|
* powerbooks.
|
|
*/
|
|
static struct feature_table_entry heathrow_laptop_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
|
|
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
|
|
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
|
|
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
|
|
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
|
|
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Paddington based machines
|
|
* The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
|
|
*/
|
|
static struct feature_table_entry paddington_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
|
|
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
|
|
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
|
|
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
|
|
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
|
|
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Core99 & MacRISC 2 machines (all machines released since the
|
|
* iBook (included), that is all AGP machines, except pangea
|
|
* chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
|
|
* used on iBook2 & iMac "flow power".
|
|
*/
|
|
static struct feature_table_entry core99_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
|
|
{ PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
|
|
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
|
|
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
|
|
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
|
|
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
|
|
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
|
|
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
|
|
#ifdef CONFIG_PM
|
|
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
|
|
#endif
|
|
#ifdef CONFIG_SMP
|
|
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
|
|
#endif /* CONFIG_SMP */
|
|
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
|
|
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* RackMac
|
|
*/
|
|
static struct feature_table_entry rackmac_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
|
|
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
|
|
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
|
|
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
|
|
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
|
|
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
|
|
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
|
|
#ifdef CONFIG_SMP
|
|
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
|
|
#endif /* CONFIG_SMP */
|
|
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
|
|
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Pangea features
|
|
*/
|
|
static struct feature_table_entry pangea_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
|
|
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
|
|
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
|
|
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
|
|
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
|
|
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
|
|
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
|
|
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
|
|
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
|
|
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
|
|
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* Intrepid features
|
|
*/
|
|
static struct feature_table_entry intrepid_features[] = {
|
|
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
|
|
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
|
|
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
|
|
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
|
|
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
|
|
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
|
|
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
|
|
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
|
|
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
|
|
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
|
|
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
|
|
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
|
|
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
|
|
{ PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
#else /* CONFIG_PPC64 */
|
|
|
|
/* G5 features
|
|
*/
|
|
static struct feature_table_entry g5_features[] = {
|
|
{ PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
|
|
{ PMAC_FTR_1394_ENABLE, g5_fw_enable },
|
|
{ PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
|
|
{ PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset },
|
|
{ PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable },
|
|
#ifdef CONFIG_SMP
|
|
{ PMAC_FTR_RESET_CPU, g5_reset_cpu },
|
|
#endif /* CONFIG_SMP */
|
|
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
|
|
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
static struct pmac_mb_def pmac_mb_defs[] = {
|
|
#ifndef CONFIG_PPC64
|
|
/*
|
|
* Desktops
|
|
*/
|
|
|
|
{ "AAPL,8500", "PowerMac 8500/8600",
|
|
PMAC_TYPE_PSURGE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,9500", "PowerMac 9500/9600",
|
|
PMAC_TYPE_PSURGE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,7200", "PowerMac 7200",
|
|
PMAC_TYPE_PSURGE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,7300", "PowerMac 7200/7300",
|
|
PMAC_TYPE_PSURGE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,7500", "PowerMac 7500",
|
|
PMAC_TYPE_PSURGE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,ShinerESB", "Apple Network Server",
|
|
PMAC_TYPE_ANS, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,e407", "Alchemy",
|
|
PMAC_TYPE_ALCHEMY, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,e411", "Gazelle",
|
|
PMAC_TYPE_GAZELLE, NULL,
|
|
0
|
|
},
|
|
{ "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
|
|
PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
|
|
0
|
|
},
|
|
{ "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
|
|
PMAC_TYPE_SILK, heathrow_desktop_features,
|
|
0
|
|
},
|
|
{ "PowerMac1,1", "Blue&White G3",
|
|
PMAC_TYPE_YOSEMITE, paddington_features,
|
|
0
|
|
},
|
|
{ "PowerMac1,2", "PowerMac G4 PCI Graphics",
|
|
PMAC_TYPE_YIKES, paddington_features,
|
|
0
|
|
},
|
|
{ "PowerMac2,1", "iMac FireWire",
|
|
PMAC_TYPE_FW_IMAC, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac2,2", "iMac FireWire",
|
|
PMAC_TYPE_FW_IMAC, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac3,1", "PowerMac G4 AGP Graphics",
|
|
PMAC_TYPE_SAWTOOTH, core99_features,
|
|
PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac3,2", "PowerMac G4 AGP Graphics",
|
|
PMAC_TYPE_SAWTOOTH, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac3,3", "PowerMac G4 AGP Graphics",
|
|
PMAC_TYPE_SAWTOOTH, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac3,4", "PowerMac G4 Silver",
|
|
PMAC_TYPE_QUICKSILVER, core99_features,
|
|
PMAC_MB_MAY_SLEEP
|
|
},
|
|
{ "PowerMac3,5", "PowerMac G4 Silver",
|
|
PMAC_TYPE_QUICKSILVER, core99_features,
|
|
PMAC_MB_MAY_SLEEP
|
|
},
|
|
{ "PowerMac3,6", "PowerMac G4 Windtunnel",
|
|
PMAC_TYPE_WINDTUNNEL, core99_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "PowerMac4,1", "iMac \"Flower Power\"",
|
|
PMAC_TYPE_PANGEA_IMAC, pangea_features,
|
|
PMAC_MB_MAY_SLEEP
|
|
},
|
|
{ "PowerMac4,2", "Flat panel iMac",
|
|
PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
|
|
PMAC_MB_CAN_SLEEP
|
|
},
|
|
{ "PowerMac4,4", "eMac",
|
|
PMAC_TYPE_EMAC, core99_features,
|
|
PMAC_MB_MAY_SLEEP
|
|
},
|
|
{ "PowerMac5,1", "PowerMac G4 Cube",
|
|
PMAC_TYPE_CUBE, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
|
|
},
|
|
{ "PowerMac6,1", "Flat panel iMac",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "PowerMac6,3", "Flat panel iMac",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "PowerMac6,4", "eMac",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "PowerMac10,1", "Mac mini",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "PowerMac10,2", "Mac mini (Late 2005)",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP,
|
|
},
|
|
{ "iMac,1", "iMac (first generation)",
|
|
PMAC_TYPE_ORIG_IMAC, paddington_features,
|
|
0
|
|
},
|
|
|
|
/*
|
|
* Xserve's
|
|
*/
|
|
|
|
{ "RackMac1,1", "XServe",
|
|
PMAC_TYPE_RACKMAC, rackmac_features,
|
|
0,
|
|
},
|
|
{ "RackMac1,2", "XServe rev. 2",
|
|
PMAC_TYPE_RACKMAC, rackmac_features,
|
|
0,
|
|
},
|
|
|
|
/*
|
|
* Laptops
|
|
*/
|
|
|
|
{ "AAPL,3400/2400", "PowerBook 3400",
|
|
PMAC_TYPE_HOOPER, ohare_features,
|
|
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
|
|
},
|
|
{ "AAPL,3500", "PowerBook 3500",
|
|
PMAC_TYPE_KANGA, ohare_features,
|
|
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
|
|
},
|
|
{ "AAPL,PowerBook1998", "PowerBook Wallstreet",
|
|
PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
|
|
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook1,1", "PowerBook 101 (Lombard)",
|
|
PMAC_TYPE_101_PBOOK, paddington_features,
|
|
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook2,1", "iBook (first generation)",
|
|
PMAC_TYPE_ORIG_IBOOK, core99_features,
|
|
PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook2,2", "iBook FireWire",
|
|
PMAC_TYPE_FW_IBOOK, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
|
|
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook3,1", "PowerBook Pismo",
|
|
PMAC_TYPE_PISMO, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
|
|
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook3,2", "PowerBook Titanium",
|
|
PMAC_TYPE_TITANIUM, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook3,3", "PowerBook Titanium II",
|
|
PMAC_TYPE_TITANIUM2, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook3,4", "PowerBook Titanium III",
|
|
PMAC_TYPE_TITANIUM3, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook3,5", "PowerBook Titanium IV",
|
|
PMAC_TYPE_TITANIUM4, core99_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook4,1", "iBook 2",
|
|
PMAC_TYPE_IBOOK2, pangea_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook4,2", "iBook 2",
|
|
PMAC_TYPE_IBOOK2, pangea_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook4,3", "iBook 2 rev. 2",
|
|
PMAC_TYPE_IBOOK2, pangea_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
|
|
},
|
|
{ "PowerBook5,1", "PowerBook G4 17\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,2", "PowerBook G4 15\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,3", "PowerBook G4 17\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,4", "PowerBook G4 15\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,5", "PowerBook G4 17\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,6", "PowerBook G4 15\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,7", "PowerBook G4 17\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,8", "PowerBook G4 15\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook5,9", "PowerBook G4 17\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,1", "PowerBook G4 12\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,2", "PowerBook G4",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,3", "iBook G4",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,4", "PowerBook G4 12\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,5", "iBook G4",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,7", "iBook G4",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
{ "PowerBook6,8", "PowerBook G4 12\"",
|
|
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
|
|
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
|
|
},
|
|
#else /* CONFIG_PPC64 */
|
|
{ "PowerMac7,2", "PowerMac G5",
|
|
PMAC_TYPE_POWERMAC_G5, g5_features,
|
|
0,
|
|
},
|
|
#ifdef CONFIG_PPC64
|
|
{ "PowerMac7,3", "PowerMac G5",
|
|
PMAC_TYPE_POWERMAC_G5, g5_features,
|
|
0,
|
|
},
|
|
{ "PowerMac8,1", "iMac G5",
|
|
PMAC_TYPE_IMAC_G5, g5_features,
|
|
0,
|
|
},
|
|
{ "PowerMac9,1", "PowerMac G5",
|
|
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
|
|
0,
|
|
},
|
|
{ "PowerMac11,2", "PowerMac G5 Dual Core",
|
|
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
|
|
0,
|
|
},
|
|
{ "PowerMac12,1", "iMac G5 (iSight)",
|
|
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
|
|
0,
|
|
},
|
|
{ "RackMac3,1", "XServe G5",
|
|
PMAC_TYPE_XSERVE_G5, g5_features,
|
|
0,
|
|
},
|
|
#endif /* CONFIG_PPC64 */
|
|
#endif /* CONFIG_PPC64 */
|
|
};
|
|
|
|
/*
|
|
* The toplevel feature_call callback
|
|
*/
|
|
long pmac_do_feature_call(unsigned int selector, ...)
|
|
{
|
|
struct device_node *node;
|
|
long param, value;
|
|
int i;
|
|
feature_call func = NULL;
|
|
va_list args;
|
|
|
|
if (pmac_mb.features)
|
|
for (i=0; pmac_mb.features[i].function; i++)
|
|
if (pmac_mb.features[i].selector == selector) {
|
|
func = pmac_mb.features[i].function;
|
|
break;
|
|
}
|
|
if (!func)
|
|
for (i=0; any_features[i].function; i++)
|
|
if (any_features[i].selector == selector) {
|
|
func = any_features[i].function;
|
|
break;
|
|
}
|
|
if (!func)
|
|
return -ENODEV;
|
|
|
|
va_start(args, selector);
|
|
node = (struct device_node*)va_arg(args, void*);
|
|
param = va_arg(args, long);
|
|
value = va_arg(args, long);
|
|
va_end(args);
|
|
|
|
return func(node, param, value);
|
|
}
|
|
|
|
static int __init probe_motherboard(void)
|
|
{
|
|
int i;
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
const char *model = NULL;
|
|
struct device_node *dt;
|
|
int ret = 0;
|
|
|
|
/* Lookup known motherboard type in device-tree. First try an
|
|
* exact match on the "model" property, then try a "compatible"
|
|
* match is none is found.
|
|
*/
|
|
dt = of_find_node_by_name(NULL, "device-tree");
|
|
if (dt != NULL)
|
|
model = of_get_property(dt, "model", NULL);
|
|
for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
|
|
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
|
|
pmac_mb = pmac_mb_defs[i];
|
|
goto found;
|
|
}
|
|
}
|
|
for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
|
|
if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
|
|
pmac_mb = pmac_mb_defs[i];
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
/* Fallback to selection depending on mac-io chip type */
|
|
switch(macio->type) {
|
|
#ifndef CONFIG_PPC64
|
|
case macio_grand_central:
|
|
pmac_mb.model_id = PMAC_TYPE_PSURGE;
|
|
pmac_mb.model_name = "Unknown PowerSurge";
|
|
break;
|
|
case macio_ohare:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
|
|
pmac_mb.model_name = "Unknown OHare-based";
|
|
break;
|
|
case macio_heathrow:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
|
|
pmac_mb.model_name = "Unknown Heathrow-based";
|
|
pmac_mb.features = heathrow_desktop_features;
|
|
break;
|
|
case macio_paddington:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
|
|
pmac_mb.model_name = "Unknown Paddington-based";
|
|
pmac_mb.features = paddington_features;
|
|
break;
|
|
case macio_keylargo:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
|
|
pmac_mb.model_name = "Unknown Keylargo-based";
|
|
pmac_mb.features = core99_features;
|
|
break;
|
|
case macio_pangea:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
|
|
pmac_mb.model_name = "Unknown Pangea-based";
|
|
pmac_mb.features = pangea_features;
|
|
break;
|
|
case macio_intrepid:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
|
|
pmac_mb.model_name = "Unknown Intrepid-based";
|
|
pmac_mb.features = intrepid_features;
|
|
break;
|
|
#else /* CONFIG_PPC64 */
|
|
case macio_keylargo2:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
|
|
pmac_mb.model_name = "Unknown K2-based";
|
|
pmac_mb.features = g5_features;
|
|
break;
|
|
case macio_shasta:
|
|
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
|
|
pmac_mb.model_name = "Unknown Shasta-based";
|
|
pmac_mb.features = g5_features;
|
|
break;
|
|
#endif /* CONFIG_PPC64 */
|
|
default:
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
found:
|
|
#ifndef CONFIG_PPC64
|
|
/* Fixup Hooper vs. Comet */
|
|
if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
|
|
u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
|
|
if (!mach_id_ptr) {
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
/* Here, I used to disable the media-bay on comet. It
|
|
* appears this is wrong, the floppy connector is actually
|
|
* a kind of media-bay and works with the current driver.
|
|
*/
|
|
if (__raw_readl(mach_id_ptr) & 0x20000000UL)
|
|
pmac_mb.model_id = PMAC_TYPE_COMET;
|
|
iounmap(mach_id_ptr);
|
|
}
|
|
|
|
/* Set default value of powersave_nap on machines that support it.
|
|
* It appears that uninorth rev 3 has a problem with it, we don't
|
|
* enable it on those. In theory, the flush-on-lock property is
|
|
* supposed to be set when not supported, but I'm not very confident
|
|
* that all Apple OF revs did it properly, I do it the paranoid way.
|
|
*/
|
|
if (uninorth_base && uninorth_rev > 3) {
|
|
struct device_node *np;
|
|
|
|
for_each_of_cpu_node(np) {
|
|
int cpu_count = 1;
|
|
|
|
/* Nap mode not supported on SMP */
|
|
if (of_property_read_bool(np, "flush-on-lock") ||
|
|
(cpu_count > 1)) {
|
|
powersave_nap = 0;
|
|
of_node_put(np);
|
|
break;
|
|
}
|
|
|
|
cpu_count++;
|
|
powersave_nap = 1;
|
|
}
|
|
}
|
|
if (powersave_nap)
|
|
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
|
|
|
|
/* On CPUs that support it (750FX), lowspeed by default during
|
|
* NAP mode
|
|
*/
|
|
powersave_lowspeed = 1;
|
|
|
|
#else /* CONFIG_PPC64 */
|
|
powersave_nap = 1;
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
/* Check for "mobile" machine */
|
|
if (model && (strncmp(model, "PowerBook", 9) == 0
|
|
|| strncmp(model, "iBook", 5) == 0))
|
|
pmac_mb.board_flags |= PMAC_MB_MOBILE;
|
|
|
|
|
|
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
|
|
done:
|
|
of_node_put(dt);
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the Core99 UniNorth host bridge and memory controller
|
|
*/
|
|
static void __init probe_uninorth(void)
|
|
{
|
|
struct resource res;
|
|
unsigned long actrl;
|
|
|
|
/* Locate core99 Uni-N */
|
|
uninorth_node = of_find_node_by_name(NULL, "uni-n");
|
|
uninorth_maj = 1;
|
|
|
|
/* Locate G5 u3 */
|
|
if (uninorth_node == NULL) {
|
|
uninorth_node = of_find_node_by_name(NULL, "u3");
|
|
uninorth_maj = 3;
|
|
}
|
|
/* Locate G5 u4 */
|
|
if (uninorth_node == NULL) {
|
|
uninorth_node = of_find_node_by_name(NULL, "u4");
|
|
uninorth_maj = 4;
|
|
}
|
|
if (uninorth_node == NULL) {
|
|
uninorth_maj = 0;
|
|
return;
|
|
}
|
|
|
|
if (of_address_to_resource(uninorth_node, 0, &res))
|
|
return;
|
|
|
|
uninorth_base = ioremap(res.start, 0x40000);
|
|
if (uninorth_base == NULL)
|
|
return;
|
|
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
|
|
if (uninorth_maj == 3 || uninorth_maj == 4) {
|
|
u3_ht_base = ioremap(res.start + U3_HT_CONFIG_BASE, 0x1000);
|
|
if (u3_ht_base == NULL) {
|
|
iounmap(uninorth_base);
|
|
return;
|
|
}
|
|
}
|
|
|
|
printk(KERN_INFO "Found %s memory controller & host bridge"
|
|
" @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
|
|
uninorth_maj == 4 ? "U4" : "UniNorth",
|
|
(unsigned int)res.start, uninorth_rev);
|
|
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
|
|
|
|
/* Set the arbitrer QAck delay according to what Apple does
|
|
*/
|
|
if (uninorth_rev < 0x11) {
|
|
actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
|
|
actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
|
|
UNI_N_ARB_CTRL_QACK_DELAY) <<
|
|
UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
|
|
UN_OUT(UNI_N_ARB_CTRL, actrl);
|
|
}
|
|
|
|
/* Some more magic as done by them in recent MacOS X on UniNorth
|
|
* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
|
|
* memory timeout
|
|
*/
|
|
if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
|
|
uninorth_rev == 0xc0)
|
|
UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
|
|
}
|
|
|
|
static void __init probe_one_macio(const char *name, const char *compat, int type)
|
|
{
|
|
struct device_node* node;
|
|
int i;
|
|
volatile u32 __iomem *base;
|
|
const u32 *addrp, *revp;
|
|
phys_addr_t addr;
|
|
u64 size;
|
|
|
|
for_each_node_by_name(node, name) {
|
|
if (!compat)
|
|
break;
|
|
if (of_device_is_compatible(node, compat))
|
|
break;
|
|
}
|
|
if (!node)
|
|
return;
|
|
for(i=0; i<MAX_MACIO_CHIPS; i++) {
|
|
if (!macio_chips[i].of_node)
|
|
break;
|
|
if (macio_chips[i].of_node == node)
|
|
goto out_put;
|
|
}
|
|
|
|
if (i >= MAX_MACIO_CHIPS) {
|
|
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
|
|
printk(KERN_ERR "pmac_feature: %pOF skipped\n", node);
|
|
goto out_put;
|
|
}
|
|
addrp = of_get_pci_address(node, 0, &size, NULL);
|
|
if (addrp == NULL) {
|
|
printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n",
|
|
node);
|
|
goto out_put;
|
|
}
|
|
addr = of_translate_address(node, addrp);
|
|
if (addr == 0) {
|
|
printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n",
|
|
node);
|
|
goto out_put;
|
|
}
|
|
base = ioremap(addr, (unsigned long)size);
|
|
if (!base) {
|
|
printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n",
|
|
node);
|
|
goto out_put;
|
|
}
|
|
if (type == macio_keylargo || type == macio_keylargo2) {
|
|
const u32 *did = of_get_property(node, "device-id", NULL);
|
|
if (*did == 0x00000025)
|
|
type = macio_pangea;
|
|
if (*did == 0x0000003e)
|
|
type = macio_intrepid;
|
|
if (*did == 0x0000004f)
|
|
type = macio_shasta;
|
|
}
|
|
macio_chips[i].of_node = node;
|
|
macio_chips[i].type = type;
|
|
macio_chips[i].base = base;
|
|
macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
|
|
macio_chips[i].name = macio_names[type];
|
|
revp = of_get_property(node, "revision-id", NULL);
|
|
if (revp)
|
|
macio_chips[i].rev = *revp;
|
|
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
|
|
macio_names[type], macio_chips[i].rev, macio_chips[i].base);
|
|
|
|
return;
|
|
|
|
out_put:
|
|
of_node_put(node);
|
|
}
|
|
|
|
static int __init
|
|
probe_macios(void)
|
|
{
|
|
/* Warning, ordering is important */
|
|
probe_one_macio("gc", NULL, macio_grand_central);
|
|
probe_one_macio("ohare", NULL, macio_ohare);
|
|
probe_one_macio("pci106b,7", NULL, macio_ohareII);
|
|
probe_one_macio("mac-io", "keylargo", macio_keylargo);
|
|
probe_one_macio("mac-io", "paddington", macio_paddington);
|
|
probe_one_macio("mac-io", "gatwick", macio_gatwick);
|
|
probe_one_macio("mac-io", "heathrow", macio_heathrow);
|
|
probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
|
|
|
|
/* Make sure the "main" macio chip appear first */
|
|
if (macio_chips[0].type == macio_gatwick
|
|
&& macio_chips[1].type == macio_heathrow) {
|
|
struct macio_chip temp = macio_chips[0];
|
|
macio_chips[0] = macio_chips[1];
|
|
macio_chips[1] = temp;
|
|
}
|
|
if (macio_chips[0].type == macio_ohareII
|
|
&& macio_chips[1].type == macio_ohare) {
|
|
struct macio_chip temp = macio_chips[0];
|
|
macio_chips[0] = macio_chips[1];
|
|
macio_chips[1] = temp;
|
|
}
|
|
macio_chips[0].lbus.index = 0;
|
|
macio_chips[1].lbus.index = 1;
|
|
|
|
return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
|
|
}
|
|
|
|
static void __init
|
|
initial_serial_shutdown(struct device_node *np)
|
|
{
|
|
int len;
|
|
const struct slot_names_prop {
|
|
int count;
|
|
char name[1];
|
|
} *slots;
|
|
const char *conn;
|
|
int port_type = PMAC_SCC_ASYNC;
|
|
int modem = 0;
|
|
|
|
slots = of_get_property(np, "slot-names", &len);
|
|
conn = of_get_property(np, "AAPL,connector", &len);
|
|
if (conn && (strcmp(conn, "infrared") == 0))
|
|
port_type = PMAC_SCC_IRDA;
|
|
else if (of_device_is_compatible(np, "cobalt"))
|
|
modem = 1;
|
|
else if (slots && slots->count > 0) {
|
|
if (strcmp(slots->name, "IrDA") == 0)
|
|
port_type = PMAC_SCC_IRDA;
|
|
else if (strcmp(slots->name, "Modem") == 0)
|
|
modem = 1;
|
|
}
|
|
if (modem)
|
|
pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
|
|
pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
|
|
}
|
|
|
|
static void __init
|
|
set_initial_features(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* That hack appears to be necessary for some StarMax motherboards
|
|
* but I'm not too sure it was audited for side-effects on other
|
|
* ohare based machines...
|
|
* Since I still have difficulties figuring the right way to
|
|
* differentiate them all and since that hack was there for a long
|
|
* time, I'll keep it around
|
|
*/
|
|
if (macio_chips[0].type == macio_ohare) {
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
np = of_find_node_by_name(NULL, "via-pmu");
|
|
if (np)
|
|
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
|
|
else
|
|
MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
|
|
of_node_put(np);
|
|
} else if (macio_chips[1].type == macio_ohare) {
|
|
struct macio_chip *macio = &macio_chips[1];
|
|
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
|
|
}
|
|
|
|
#ifdef CONFIG_PPC64
|
|
if (macio_chips[0].type == macio_keylargo2 ||
|
|
macio_chips[0].type == macio_shasta) {
|
|
#ifndef CONFIG_SMP
|
|
/* On SMP machines running UP, we have the second CPU eating
|
|
* bus cycles. We need to take it off the bus. This is done
|
|
* from pmac_smp for SMP kernels running on one CPU
|
|
*/
|
|
np = of_find_node_by_type(NULL, "cpu");
|
|
if (np != NULL)
|
|
np = of_find_node_by_type(np, "cpu");
|
|
if (np != NULL) {
|
|
g5_phy_disable_cpu1();
|
|
of_node_put(np);
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
/* Enable GMAC for now for PCI probing. It will be disabled
|
|
* later on after PCI probe
|
|
*/
|
|
for_each_node_by_name(np, "ethernet")
|
|
if (of_device_is_compatible(np, "K2-GMAC"))
|
|
g5_gmac_enable(np, 0, 1);
|
|
|
|
/* Enable FW before PCI probe. Will be disabled later on
|
|
* Note: We should have a batter way to check that we are
|
|
* dealing with uninorth internal cell and not a PCI cell
|
|
* on the external PCI. The code below works though.
|
|
*/
|
|
for_each_node_by_name(np, "firewire") {
|
|
if (of_device_is_compatible(np, "pci106b,5811")) {
|
|
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
|
|
g5_fw_enable(np, 0, 1);
|
|
}
|
|
}
|
|
}
|
|
#else /* CONFIG_PPC64 */
|
|
|
|
if (macio_chips[0].type == macio_keylargo ||
|
|
macio_chips[0].type == macio_pangea ||
|
|
macio_chips[0].type == macio_intrepid) {
|
|
/* Enable GMAC for now for PCI probing. It will be disabled
|
|
* later on after PCI probe
|
|
*/
|
|
for_each_node_by_name(np, "ethernet") {
|
|
if (np->parent
|
|
&& of_device_is_compatible(np->parent, "uni-north")
|
|
&& of_device_is_compatible(np, "gmac"))
|
|
core99_gmac_enable(np, 0, 1);
|
|
}
|
|
|
|
/* Enable FW before PCI probe. Will be disabled later on
|
|
* Note: We should have a batter way to check that we are
|
|
* dealing with uninorth internal cell and not a PCI cell
|
|
* on the external PCI. The code below works though.
|
|
*/
|
|
for_each_node_by_name(np, "firewire") {
|
|
if (np->parent
|
|
&& of_device_is_compatible(np->parent, "uni-north")
|
|
&& (of_device_is_compatible(np, "pci106b,18") ||
|
|
of_device_is_compatible(np, "pci106b,30") ||
|
|
of_device_is_compatible(np, "pci11c1,5811"))) {
|
|
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
|
|
core99_firewire_enable(np, 0, 1);
|
|
}
|
|
}
|
|
|
|
/* Enable ATA-100 before PCI probe. */
|
|
for_each_node_by_name(np, "ata-6") {
|
|
if (np->parent
|
|
&& of_device_is_compatible(np->parent, "uni-north")
|
|
&& of_device_is_compatible(np, "kauai-ata")) {
|
|
core99_ata100_enable(np, 1);
|
|
}
|
|
}
|
|
|
|
/* Switch airport off */
|
|
for_each_node_by_name(np, "radio") {
|
|
if (np->parent == macio_chips[0].of_node) {
|
|
macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
|
|
core99_airport_enable(np, 0, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* On all machines that support sound PM, switch sound off */
|
|
if (macio_chips[0].of_node)
|
|
pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
|
|
macio_chips[0].of_node, 0, 0);
|
|
|
|
/* While on some desktop G3s, we turn it back on */
|
|
if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
|
|
&& (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
|
|
pmac_mb.model_id == PMAC_TYPE_SILK)) {
|
|
struct macio_chip *macio = &macio_chips[0];
|
|
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
|
|
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
|
|
}
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
|
|
/* On all machines, switch modem & serial ports off */
|
|
for_each_node_by_name(np, "ch-a")
|
|
initial_serial_shutdown(np);
|
|
for_each_node_by_name(np, "ch-b")
|
|
initial_serial_shutdown(np);
|
|
}
|
|
|
|
void __init
|
|
pmac_feature_init(void)
|
|
{
|
|
/* Detect the UniNorth memory controller */
|
|
probe_uninorth();
|
|
|
|
/* Probe mac-io controllers */
|
|
if (probe_macios()) {
|
|
printk(KERN_WARNING "No mac-io chip found\n");
|
|
return;
|
|
}
|
|
|
|
/* Probe machine type */
|
|
if (probe_motherboard())
|
|
printk(KERN_WARNING "Unknown PowerMac !\n");
|
|
|
|
/* Set some initial features (turn off some chips that will
|
|
* be later turned on)
|
|
*/
|
|
set_initial_features();
|
|
}
|
|
|
|
#if 0
|
|
static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
|
|
{
|
|
int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
|
|
int bits[8] = { 8,16,0,32,2,4,0,0 };
|
|
int freq = (frq >> 8) & 0xf;
|
|
|
|
if (freqs[freq] == 0)
|
|
printk("%s: Unknown HT link frequency %x\n", name, freq);
|
|
else
|
|
printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
|
|
name, freqs[freq],
|
|
bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
|
|
}
|
|
|
|
void __init pmac_check_ht_link(void)
|
|
{
|
|
u32 ufreq, freq, ucfg, cfg;
|
|
struct device_node *pcix_node;
|
|
u8 px_bus, px_devfn;
|
|
struct pci_controller *px_hose;
|
|
|
|
(void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
|
|
ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
|
|
ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
|
|
dump_HT_speeds("U3 HyperTransport", cfg, freq);
|
|
|
|
pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
|
|
if (pcix_node == NULL) {
|
|
printk("No PCI-X bridge found\n");
|
|
return;
|
|
}
|
|
if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
|
|
printk("PCI-X bridge found but not matched to pci\n");
|
|
return;
|
|
}
|
|
px_hose = pci_find_hose_for_OF_device(pcix_node);
|
|
if (px_hose == NULL) {
|
|
printk("PCI-X bridge found but not matched to host\n");
|
|
return;
|
|
}
|
|
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
|
|
early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
|
|
dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
|
|
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
|
|
early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
|
|
dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
|
|
}
|
|
#endif /* 0 */
|
|
|
|
/*
|
|
* Early video resume hook
|
|
*/
|
|
|
|
static void (*pmac_early_vresume_proc)(void *data);
|
|
static void *pmac_early_vresume_data;
|
|
|
|
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
|
|
{
|
|
if (!machine_is(powermac))
|
|
return;
|
|
preempt_disable();
|
|
pmac_early_vresume_proc = proc;
|
|
pmac_early_vresume_data = data;
|
|
preempt_enable();
|
|
}
|
|
EXPORT_SYMBOL(pmac_set_early_video_resume);
|
|
|
|
void pmac_call_early_video_resume(void)
|
|
{
|
|
if (pmac_early_vresume_proc)
|
|
pmac_early_vresume_proc(pmac_early_vresume_data);
|
|
}
|
|
|
|
/*
|
|
* AGP related suspend/resume code
|
|
*/
|
|
|
|
static struct pci_dev *pmac_agp_bridge;
|
|
static int (*pmac_agp_suspend)(struct pci_dev *bridge);
|
|
static int (*pmac_agp_resume)(struct pci_dev *bridge);
|
|
|
|
void pmac_register_agp_pm(struct pci_dev *bridge,
|
|
int (*suspend)(struct pci_dev *bridge),
|
|
int (*resume)(struct pci_dev *bridge))
|
|
{
|
|
if (suspend || resume) {
|
|
pmac_agp_bridge = bridge;
|
|
pmac_agp_suspend = suspend;
|
|
pmac_agp_resume = resume;
|
|
return;
|
|
}
|
|
if (bridge != pmac_agp_bridge)
|
|
return;
|
|
pmac_agp_suspend = pmac_agp_resume = NULL;
|
|
return;
|
|
}
|
|
EXPORT_SYMBOL(pmac_register_agp_pm);
|
|
|
|
void pmac_suspend_agp_for_card(struct pci_dev *dev)
|
|
{
|
|
if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
|
|
return;
|
|
if (pmac_agp_bridge->bus != dev->bus)
|
|
return;
|
|
pmac_agp_suspend(pmac_agp_bridge);
|
|
}
|
|
EXPORT_SYMBOL(pmac_suspend_agp_for_card);
|
|
|
|
void pmac_resume_agp_for_card(struct pci_dev *dev)
|
|
{
|
|
if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
|
|
return;
|
|
if (pmac_agp_bridge->bus != dev->bus)
|
|
return;
|
|
pmac_agp_resume(pmac_agp_bridge);
|
|
}
|
|
EXPORT_SYMBOL(pmac_resume_agp_for_card);
|
|
|
|
int pmac_get_uninorth_variant(void)
|
|
{
|
|
return uninorth_maj;
|
|
}
|