linux-zen-desktop/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

142 lines
2.4 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/* Copyright (c) 2018-2019 SiFive, Inc */
#include "fu540-c000.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
#define RTCCLK_FREQ 1000000
/ {
model = "SiFive HiFive Unleashed A00";
compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000",
"sifive,fu540";
chosen {
stdout-path = "serial0";
};
cpus {
timebase-frequency = <RTCCLK_FREQ>;
};
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x2 0x00000000>;
};
hfclk: hfclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333333>;
clock-output-names = "hfclk";
};
rtcclk: rtcclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <RTCCLK_FREQ>;
clock-output-names = "rtcclk";
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
led-controller {
compatible = "pwm-leds";
led-d1 {
pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
active-low;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d1";
};
led-d2 {
pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
active-low;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d2";
};
led-d3 {
pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
active-low;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d3";
};
led-d4 {
pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
active-low;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d4";
};
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&qspi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&qspi2 {
status = "okay";
mmc@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3300 3300>;
disable-wp;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
status = "okay";
phy-mode = "gmii";
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0771";
reg = <0>;
};
};
&pwm0 {
status = "okay";
};
&pwm1 {
status = "okay";
};
&gpio {
status = "okay";
};