1817 lines
52 KiB
C
1817 lines
52 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
* Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
|
|
* Pierre-Yves Mordret <pierre-yves.mordret@st.com>
|
|
*
|
|
* Driver for STM32 MDMA controller
|
|
*
|
|
* Inspired by stm32-dma.c and dma-jz4780.c
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/list.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "virt-dma.h"
|
|
|
|
#define STM32_MDMA_GISR0 0x0000 /* MDMA Int Status Reg 1 */
|
|
|
|
/* MDMA Channel x interrupt/status register */
|
|
#define STM32_MDMA_CISR(x) (0x40 + 0x40 * (x)) /* x = 0..62 */
|
|
#define STM32_MDMA_CISR_CRQA BIT(16)
|
|
#define STM32_MDMA_CISR_TCIF BIT(4)
|
|
#define STM32_MDMA_CISR_BTIF BIT(3)
|
|
#define STM32_MDMA_CISR_BRTIF BIT(2)
|
|
#define STM32_MDMA_CISR_CTCIF BIT(1)
|
|
#define STM32_MDMA_CISR_TEIF BIT(0)
|
|
|
|
/* MDMA Channel x interrupt flag clear register */
|
|
#define STM32_MDMA_CIFCR(x) (0x44 + 0x40 * (x))
|
|
#define STM32_MDMA_CIFCR_CLTCIF BIT(4)
|
|
#define STM32_MDMA_CIFCR_CBTIF BIT(3)
|
|
#define STM32_MDMA_CIFCR_CBRTIF BIT(2)
|
|
#define STM32_MDMA_CIFCR_CCTCIF BIT(1)
|
|
#define STM32_MDMA_CIFCR_CTEIF BIT(0)
|
|
#define STM32_MDMA_CIFCR_CLEAR_ALL (STM32_MDMA_CIFCR_CLTCIF \
|
|
| STM32_MDMA_CIFCR_CBTIF \
|
|
| STM32_MDMA_CIFCR_CBRTIF \
|
|
| STM32_MDMA_CIFCR_CCTCIF \
|
|
| STM32_MDMA_CIFCR_CTEIF)
|
|
|
|
/* MDMA Channel x error status register */
|
|
#define STM32_MDMA_CESR(x) (0x48 + 0x40 * (x))
|
|
#define STM32_MDMA_CESR_BSE BIT(11)
|
|
#define STM32_MDMA_CESR_ASR BIT(10)
|
|
#define STM32_MDMA_CESR_TEMD BIT(9)
|
|
#define STM32_MDMA_CESR_TELD BIT(8)
|
|
#define STM32_MDMA_CESR_TED BIT(7)
|
|
#define STM32_MDMA_CESR_TEA_MASK GENMASK(6, 0)
|
|
|
|
/* MDMA Channel x control register */
|
|
#define STM32_MDMA_CCR(x) (0x4C + 0x40 * (x))
|
|
#define STM32_MDMA_CCR_SWRQ BIT(16)
|
|
#define STM32_MDMA_CCR_WEX BIT(14)
|
|
#define STM32_MDMA_CCR_HEX BIT(13)
|
|
#define STM32_MDMA_CCR_BEX BIT(12)
|
|
#define STM32_MDMA_CCR_SM BIT(8)
|
|
#define STM32_MDMA_CCR_PL_MASK GENMASK(7, 6)
|
|
#define STM32_MDMA_CCR_PL(n) FIELD_PREP(STM32_MDMA_CCR_PL_MASK, (n))
|
|
#define STM32_MDMA_CCR_TCIE BIT(5)
|
|
#define STM32_MDMA_CCR_BTIE BIT(4)
|
|
#define STM32_MDMA_CCR_BRTIE BIT(3)
|
|
#define STM32_MDMA_CCR_CTCIE BIT(2)
|
|
#define STM32_MDMA_CCR_TEIE BIT(1)
|
|
#define STM32_MDMA_CCR_EN BIT(0)
|
|
#define STM32_MDMA_CCR_IRQ_MASK (STM32_MDMA_CCR_TCIE \
|
|
| STM32_MDMA_CCR_BTIE \
|
|
| STM32_MDMA_CCR_BRTIE \
|
|
| STM32_MDMA_CCR_CTCIE \
|
|
| STM32_MDMA_CCR_TEIE)
|
|
|
|
/* MDMA Channel x transfer configuration register */
|
|
#define STM32_MDMA_CTCR(x) (0x50 + 0x40 * (x))
|
|
#define STM32_MDMA_CTCR_BWM BIT(31)
|
|
#define STM32_MDMA_CTCR_SWRM BIT(30)
|
|
#define STM32_MDMA_CTCR_TRGM_MSK GENMASK(29, 28)
|
|
#define STM32_MDMA_CTCR_TRGM(n) FIELD_PREP(STM32_MDMA_CTCR_TRGM_MSK, (n))
|
|
#define STM32_MDMA_CTCR_TRGM_GET(n) FIELD_GET(STM32_MDMA_CTCR_TRGM_MSK, (n))
|
|
#define STM32_MDMA_CTCR_PAM_MASK GENMASK(27, 26)
|
|
#define STM32_MDMA_CTCR_PAM(n) FIELD_PREP(STM32_MDMA_CTCR_PAM_MASK, (n))
|
|
#define STM32_MDMA_CTCR_PKE BIT(25)
|
|
#define STM32_MDMA_CTCR_TLEN_MSK GENMASK(24, 18)
|
|
#define STM32_MDMA_CTCR_TLEN(n) FIELD_PREP(STM32_MDMA_CTCR_TLEN_MSK, (n))
|
|
#define STM32_MDMA_CTCR_TLEN_GET(n) FIELD_GET(STM32_MDMA_CTCR_TLEN_MSK, (n))
|
|
#define STM32_MDMA_CTCR_LEN2_MSK GENMASK(25, 18)
|
|
#define STM32_MDMA_CTCR_LEN2(n) FIELD_PREP(STM32_MDMA_CTCR_LEN2_MSK, (n))
|
|
#define STM32_MDMA_CTCR_LEN2_GET(n) FIELD_GET(STM32_MDMA_CTCR_LEN2_MSK, (n))
|
|
#define STM32_MDMA_CTCR_DBURST_MASK GENMASK(17, 15)
|
|
#define STM32_MDMA_CTCR_DBURST(n) FIELD_PREP(STM32_MDMA_CTCR_DBURST_MASK, (n))
|
|
#define STM32_MDMA_CTCR_SBURST_MASK GENMASK(14, 12)
|
|
#define STM32_MDMA_CTCR_SBURST(n) FIELD_PREP(STM32_MDMA_CTCR_SBURST_MASK, (n))
|
|
#define STM32_MDMA_CTCR_DINCOS_MASK GENMASK(11, 10)
|
|
#define STM32_MDMA_CTCR_DINCOS(n) FIELD_PREP(STM32_MDMA_CTCR_DINCOS_MASK, (n))
|
|
#define STM32_MDMA_CTCR_SINCOS_MASK GENMASK(9, 8)
|
|
#define STM32_MDMA_CTCR_SINCOS(n) FIELD_PREP(STM32_MDMA_CTCR_SINCOS_MASK, (n))
|
|
#define STM32_MDMA_CTCR_DSIZE_MASK GENMASK(7, 6)
|
|
#define STM32_MDMA_CTCR_DSIZE(n) FIELD_PREP(STM32_MDMA_CTCR_DSIZE_MASK, (n))
|
|
#define STM32_MDMA_CTCR_SSIZE_MASK GENMASK(5, 4)
|
|
#define STM32_MDMA_CTCR_SSIZE(n) FIELD_PREP(STM32_MDMA_CTCR_SSIZE_MASK, (n))
|
|
#define STM32_MDMA_CTCR_DINC_MASK GENMASK(3, 2)
|
|
#define STM32_MDMA_CTCR_DINC(n) FIELD_PREP(STM32_MDMA_CTCR_DINC_MASK, (n))
|
|
#define STM32_MDMA_CTCR_SINC_MASK GENMASK(1, 0)
|
|
#define STM32_MDMA_CTCR_SINC(n) FIELD_PREP(STM32_MDMA_CTCR_SINC_MASK, (n))
|
|
#define STM32_MDMA_CTCR_CFG_MASK (STM32_MDMA_CTCR_SINC_MASK \
|
|
| STM32_MDMA_CTCR_DINC_MASK \
|
|
| STM32_MDMA_CTCR_SINCOS_MASK \
|
|
| STM32_MDMA_CTCR_DINCOS_MASK \
|
|
| STM32_MDMA_CTCR_LEN2_MSK \
|
|
| STM32_MDMA_CTCR_TRGM_MSK)
|
|
|
|
/* MDMA Channel x block number of data register */
|
|
#define STM32_MDMA_CBNDTR(x) (0x54 + 0x40 * (x))
|
|
#define STM32_MDMA_CBNDTR_BRC_MK GENMASK(31, 20)
|
|
#define STM32_MDMA_CBNDTR_BRC(n) FIELD_PREP(STM32_MDMA_CBNDTR_BRC_MK, (n))
|
|
#define STM32_MDMA_CBNDTR_BRC_GET(n) FIELD_GET(STM32_MDMA_CBNDTR_BRC_MK, (n))
|
|
|
|
#define STM32_MDMA_CBNDTR_BRDUM BIT(19)
|
|
#define STM32_MDMA_CBNDTR_BRSUM BIT(18)
|
|
#define STM32_MDMA_CBNDTR_BNDT_MASK GENMASK(16, 0)
|
|
#define STM32_MDMA_CBNDTR_BNDT(n) FIELD_PREP(STM32_MDMA_CBNDTR_BNDT_MASK, (n))
|
|
|
|
/* MDMA Channel x source address register */
|
|
#define STM32_MDMA_CSAR(x) (0x58 + 0x40 * (x))
|
|
|
|
/* MDMA Channel x destination address register */
|
|
#define STM32_MDMA_CDAR(x) (0x5C + 0x40 * (x))
|
|
|
|
/* MDMA Channel x block repeat address update register */
|
|
#define STM32_MDMA_CBRUR(x) (0x60 + 0x40 * (x))
|
|
#define STM32_MDMA_CBRUR_DUV_MASK GENMASK(31, 16)
|
|
#define STM32_MDMA_CBRUR_DUV(n) FIELD_PREP(STM32_MDMA_CBRUR_DUV_MASK, (n))
|
|
#define STM32_MDMA_CBRUR_SUV_MASK GENMASK(15, 0)
|
|
#define STM32_MDMA_CBRUR_SUV(n) FIELD_PREP(STM32_MDMA_CBRUR_SUV_MASK, (n))
|
|
|
|
/* MDMA Channel x link address register */
|
|
#define STM32_MDMA_CLAR(x) (0x64 + 0x40 * (x))
|
|
|
|
/* MDMA Channel x trigger and bus selection register */
|
|
#define STM32_MDMA_CTBR(x) (0x68 + 0x40 * (x))
|
|
#define STM32_MDMA_CTBR_DBUS BIT(17)
|
|
#define STM32_MDMA_CTBR_SBUS BIT(16)
|
|
#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(5, 0)
|
|
#define STM32_MDMA_CTBR_TSEL(n) FIELD_PREP(STM32_MDMA_CTBR_TSEL_MASK, (n))
|
|
|
|
/* MDMA Channel x mask address register */
|
|
#define STM32_MDMA_CMAR(x) (0x70 + 0x40 * (x))
|
|
|
|
/* MDMA Channel x mask data register */
|
|
#define STM32_MDMA_CMDR(x) (0x74 + 0x40 * (x))
|
|
|
|
#define STM32_MDMA_MAX_BUF_LEN 128
|
|
#define STM32_MDMA_MAX_BLOCK_LEN 65536
|
|
#define STM32_MDMA_MAX_CHANNELS 32
|
|
#define STM32_MDMA_MAX_REQUESTS 256
|
|
#define STM32_MDMA_MAX_BURST 128
|
|
#define STM32_MDMA_VERY_HIGH_PRIORITY 0x3
|
|
|
|
enum stm32_mdma_trigger_mode {
|
|
STM32_MDMA_BUFFER,
|
|
STM32_MDMA_BLOCK,
|
|
STM32_MDMA_BLOCK_REP,
|
|
STM32_MDMA_LINKED_LIST,
|
|
};
|
|
|
|
enum stm32_mdma_width {
|
|
STM32_MDMA_BYTE,
|
|
STM32_MDMA_HALF_WORD,
|
|
STM32_MDMA_WORD,
|
|
STM32_MDMA_DOUBLE_WORD,
|
|
};
|
|
|
|
enum stm32_mdma_inc_mode {
|
|
STM32_MDMA_FIXED = 0,
|
|
STM32_MDMA_INC = 2,
|
|
STM32_MDMA_DEC = 3,
|
|
};
|
|
|
|
struct stm32_mdma_chan_config {
|
|
u32 request;
|
|
u32 priority_level;
|
|
u32 transfer_config;
|
|
u32 mask_addr;
|
|
u32 mask_data;
|
|
bool m2m_hw; /* True when MDMA is triggered by STM32 DMA */
|
|
};
|
|
|
|
struct stm32_mdma_hwdesc {
|
|
u32 ctcr;
|
|
u32 cbndtr;
|
|
u32 csar;
|
|
u32 cdar;
|
|
u32 cbrur;
|
|
u32 clar;
|
|
u32 ctbr;
|
|
u32 dummy;
|
|
u32 cmar;
|
|
u32 cmdr;
|
|
} __aligned(64);
|
|
|
|
struct stm32_mdma_desc_node {
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
dma_addr_t hwdesc_phys;
|
|
};
|
|
|
|
struct stm32_mdma_desc {
|
|
struct virt_dma_desc vdesc;
|
|
u32 ccr;
|
|
bool cyclic;
|
|
u32 count;
|
|
struct stm32_mdma_desc_node node[];
|
|
};
|
|
|
|
struct stm32_mdma_dma_config {
|
|
u32 request; /* STM32 DMA channel stream id, triggering MDMA */
|
|
u32 cmar; /* STM32 DMA interrupt flag clear register address */
|
|
u32 cmdr; /* STM32 DMA Transfer Complete flag */
|
|
};
|
|
|
|
struct stm32_mdma_chan {
|
|
struct virt_dma_chan vchan;
|
|
struct dma_pool *desc_pool;
|
|
u32 id;
|
|
struct stm32_mdma_desc *desc;
|
|
u32 curr_hwdesc;
|
|
struct dma_slave_config dma_config;
|
|
struct stm32_mdma_chan_config chan_config;
|
|
bool busy;
|
|
u32 mem_burst;
|
|
u32 mem_width;
|
|
};
|
|
|
|
struct stm32_mdma_device {
|
|
struct dma_device ddev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
int irq;
|
|
u32 nr_channels;
|
|
u32 nr_requests;
|
|
u32 nr_ahb_addr_masks;
|
|
u32 chan_reserved;
|
|
struct stm32_mdma_chan chan[STM32_MDMA_MAX_CHANNELS];
|
|
u32 ahb_addr_masks[];
|
|
};
|
|
|
|
static struct stm32_mdma_device *stm32_mdma_get_dev(
|
|
struct stm32_mdma_chan *chan)
|
|
{
|
|
return container_of(chan->vchan.chan.device, struct stm32_mdma_device,
|
|
ddev);
|
|
}
|
|
|
|
static struct stm32_mdma_chan *to_stm32_mdma_chan(struct dma_chan *c)
|
|
{
|
|
return container_of(c, struct stm32_mdma_chan, vchan.chan);
|
|
}
|
|
|
|
static struct stm32_mdma_desc *to_stm32_mdma_desc(struct virt_dma_desc *vdesc)
|
|
{
|
|
return container_of(vdesc, struct stm32_mdma_desc, vdesc);
|
|
}
|
|
|
|
static struct device *chan2dev(struct stm32_mdma_chan *chan)
|
|
{
|
|
return &chan->vchan.chan.dev->device;
|
|
}
|
|
|
|
static struct device *mdma2dev(struct stm32_mdma_device *mdma_dev)
|
|
{
|
|
return mdma_dev->ddev.dev;
|
|
}
|
|
|
|
static u32 stm32_mdma_read(struct stm32_mdma_device *dmadev, u32 reg)
|
|
{
|
|
return readl_relaxed(dmadev->base + reg);
|
|
}
|
|
|
|
static void stm32_mdma_write(struct stm32_mdma_device *dmadev, u32 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, dmadev->base + reg);
|
|
}
|
|
|
|
static void stm32_mdma_set_bits(struct stm32_mdma_device *dmadev, u32 reg,
|
|
u32 mask)
|
|
{
|
|
void __iomem *addr = dmadev->base + reg;
|
|
|
|
writel_relaxed(readl_relaxed(addr) | mask, addr);
|
|
}
|
|
|
|
static void stm32_mdma_clr_bits(struct stm32_mdma_device *dmadev, u32 reg,
|
|
u32 mask)
|
|
{
|
|
void __iomem *addr = dmadev->base + reg;
|
|
|
|
writel_relaxed(readl_relaxed(addr) & ~mask, addr);
|
|
}
|
|
|
|
static struct stm32_mdma_desc *stm32_mdma_alloc_desc(
|
|
struct stm32_mdma_chan *chan, u32 count)
|
|
{
|
|
struct stm32_mdma_desc *desc;
|
|
int i;
|
|
|
|
desc = kzalloc(struct_size(desc, node, count), GFP_NOWAIT);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
desc->node[i].hwdesc =
|
|
dma_pool_alloc(chan->desc_pool, GFP_NOWAIT,
|
|
&desc->node[i].hwdesc_phys);
|
|
if (!desc->node[i].hwdesc)
|
|
goto err;
|
|
}
|
|
|
|
desc->count = count;
|
|
|
|
return desc;
|
|
|
|
err:
|
|
dev_err(chan2dev(chan), "Failed to allocate descriptor\n");
|
|
while (--i >= 0)
|
|
dma_pool_free(chan->desc_pool, desc->node[i].hwdesc,
|
|
desc->node[i].hwdesc_phys);
|
|
kfree(desc);
|
|
return NULL;
|
|
}
|
|
|
|
static void stm32_mdma_desc_free(struct virt_dma_desc *vdesc)
|
|
{
|
|
struct stm32_mdma_desc *desc = to_stm32_mdma_desc(vdesc);
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(vdesc->tx.chan);
|
|
int i;
|
|
|
|
for (i = 0; i < desc->count; i++)
|
|
dma_pool_free(chan->desc_pool, desc->node[i].hwdesc,
|
|
desc->node[i].hwdesc_phys);
|
|
kfree(desc);
|
|
}
|
|
|
|
static int stm32_mdma_get_width(struct stm32_mdma_chan *chan,
|
|
enum dma_slave_buswidth width)
|
|
{
|
|
switch (width) {
|
|
case DMA_SLAVE_BUSWIDTH_1_BYTE:
|
|
case DMA_SLAVE_BUSWIDTH_2_BYTES:
|
|
case DMA_SLAVE_BUSWIDTH_4_BYTES:
|
|
case DMA_SLAVE_BUSWIDTH_8_BYTES:
|
|
return ffs(width) - 1;
|
|
default:
|
|
dev_err(chan2dev(chan), "Dma bus width %i not supported\n",
|
|
width);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static enum dma_slave_buswidth stm32_mdma_get_max_width(dma_addr_t addr,
|
|
u32 buf_len, u32 tlen)
|
|
{
|
|
enum dma_slave_buswidth max_width = DMA_SLAVE_BUSWIDTH_8_BYTES;
|
|
|
|
for (max_width = DMA_SLAVE_BUSWIDTH_8_BYTES;
|
|
max_width > DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
max_width >>= 1) {
|
|
/*
|
|
* Address and buffer length both have to be aligned on
|
|
* bus width
|
|
*/
|
|
if ((((buf_len | addr) & (max_width - 1)) == 0) &&
|
|
tlen >= max_width)
|
|
break;
|
|
}
|
|
|
|
return max_width;
|
|
}
|
|
|
|
static u32 stm32_mdma_get_best_burst(u32 buf_len, u32 tlen, u32 max_burst,
|
|
enum dma_slave_buswidth width)
|
|
{
|
|
u32 best_burst;
|
|
|
|
best_burst = min((u32)1 << __ffs(tlen | buf_len),
|
|
max_burst * width) / width;
|
|
|
|
return (best_burst > 0) ? best_burst : 1;
|
|
}
|
|
|
|
static int stm32_mdma_disable_chan(struct stm32_mdma_chan *chan)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
u32 ccr, cisr, id, reg;
|
|
int ret;
|
|
|
|
id = chan->id;
|
|
reg = STM32_MDMA_CCR(id);
|
|
|
|
/* Disable interrupts */
|
|
stm32_mdma_clr_bits(dmadev, reg, STM32_MDMA_CCR_IRQ_MASK);
|
|
|
|
ccr = stm32_mdma_read(dmadev, reg);
|
|
if (ccr & STM32_MDMA_CCR_EN) {
|
|
stm32_mdma_clr_bits(dmadev, reg, STM32_MDMA_CCR_EN);
|
|
|
|
/* Ensure that any ongoing transfer has been completed */
|
|
ret = readl_relaxed_poll_timeout_atomic(
|
|
dmadev->base + STM32_MDMA_CISR(id), cisr,
|
|
(cisr & STM32_MDMA_CISR_CTCIF), 10, 1000);
|
|
if (ret) {
|
|
dev_err(chan2dev(chan), "%s: timeout!\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_mdma_stop(struct stm32_mdma_chan *chan)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
u32 status;
|
|
int ret;
|
|
|
|
/* Disable DMA */
|
|
ret = stm32_mdma_disable_chan(chan);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
/* Clear interrupt status if it is there */
|
|
status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
|
|
if (status) {
|
|
dev_dbg(chan2dev(chan), "%s(): clearing interrupt: 0x%08x\n",
|
|
__func__, status);
|
|
stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(chan->id), status);
|
|
}
|
|
|
|
chan->busy = false;
|
|
}
|
|
|
|
static void stm32_mdma_set_bus(struct stm32_mdma_device *dmadev, u32 *ctbr,
|
|
u32 ctbr_mask, u32 src_addr)
|
|
{
|
|
u32 mask;
|
|
int i;
|
|
|
|
/* Check if memory device is on AHB or AXI */
|
|
*ctbr &= ~ctbr_mask;
|
|
mask = src_addr & 0xF0000000;
|
|
for (i = 0; i < dmadev->nr_ahb_addr_masks; i++) {
|
|
if (mask == dmadev->ahb_addr_masks[i]) {
|
|
*ctbr |= ctbr_mask;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan,
|
|
enum dma_transfer_direction direction,
|
|
u32 *mdma_ccr, u32 *mdma_ctcr,
|
|
u32 *mdma_ctbr, dma_addr_t addr,
|
|
u32 buf_len)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct stm32_mdma_chan_config *chan_config = &chan->chan_config;
|
|
enum dma_slave_buswidth src_addr_width, dst_addr_width;
|
|
phys_addr_t src_addr, dst_addr;
|
|
int src_bus_width, dst_bus_width;
|
|
u32 src_maxburst, dst_maxburst, src_best_burst, dst_best_burst;
|
|
u32 ccr, ctcr, ctbr, tlen;
|
|
|
|
src_addr_width = chan->dma_config.src_addr_width;
|
|
dst_addr_width = chan->dma_config.dst_addr_width;
|
|
src_maxburst = chan->dma_config.src_maxburst;
|
|
dst_maxburst = chan->dma_config.dst_maxburst;
|
|
|
|
ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
|
|
ctcr = stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id));
|
|
ctbr = stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id));
|
|
|
|
/* Enable HW request mode */
|
|
ctcr &= ~STM32_MDMA_CTCR_SWRM;
|
|
|
|
/* Set DINC, SINC, DINCOS, SINCOS, TRGM and TLEN retrieve from DT */
|
|
ctcr &= ~STM32_MDMA_CTCR_CFG_MASK;
|
|
ctcr |= chan_config->transfer_config & STM32_MDMA_CTCR_CFG_MASK;
|
|
|
|
/*
|
|
* For buffer transfer length (TLEN) we have to set
|
|
* the number of bytes - 1 in CTCR register
|
|
*/
|
|
tlen = STM32_MDMA_CTCR_LEN2_GET(ctcr);
|
|
ctcr &= ~STM32_MDMA_CTCR_LEN2_MSK;
|
|
ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1));
|
|
|
|
/* Disable Pack Enable */
|
|
ctcr &= ~STM32_MDMA_CTCR_PKE;
|
|
|
|
/* Check burst size constraints */
|
|
if (src_maxburst * src_addr_width > STM32_MDMA_MAX_BURST ||
|
|
dst_maxburst * dst_addr_width > STM32_MDMA_MAX_BURST) {
|
|
dev_err(chan2dev(chan),
|
|
"burst size * bus width higher than %d bytes\n",
|
|
STM32_MDMA_MAX_BURST);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((!is_power_of_2(src_maxburst) && src_maxburst > 0) ||
|
|
(!is_power_of_2(dst_maxburst) && dst_maxburst > 0)) {
|
|
dev_err(chan2dev(chan), "burst size must be a power of 2\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Configure channel control:
|
|
* - Clear SW request as in this case this is a HW one
|
|
* - Clear WEX, HEX and BEX bits
|
|
* - Set priority level
|
|
*/
|
|
ccr &= ~(STM32_MDMA_CCR_SWRQ | STM32_MDMA_CCR_WEX | STM32_MDMA_CCR_HEX |
|
|
STM32_MDMA_CCR_BEX | STM32_MDMA_CCR_PL_MASK);
|
|
ccr |= STM32_MDMA_CCR_PL(chan_config->priority_level);
|
|
|
|
/* Configure Trigger selection */
|
|
ctbr &= ~STM32_MDMA_CTBR_TSEL_MASK;
|
|
ctbr |= STM32_MDMA_CTBR_TSEL(chan_config->request);
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
dst_addr = chan->dma_config.dst_addr;
|
|
|
|
/* Set device data size */
|
|
if (chan_config->m2m_hw)
|
|
dst_addr_width = stm32_mdma_get_max_width(dst_addr, buf_len,
|
|
STM32_MDMA_MAX_BUF_LEN);
|
|
dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width);
|
|
if (dst_bus_width < 0)
|
|
return dst_bus_width;
|
|
ctcr &= ~STM32_MDMA_CTCR_DSIZE_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_DSIZE(dst_bus_width);
|
|
if (chan_config->m2m_hw) {
|
|
ctcr &= ~STM32_MDMA_CTCR_DINCOS_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_DINCOS(dst_bus_width);
|
|
}
|
|
|
|
/* Set device burst value */
|
|
if (chan_config->m2m_hw)
|
|
dst_maxburst = STM32_MDMA_MAX_BUF_LEN / dst_addr_width;
|
|
|
|
dst_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
|
|
dst_maxburst,
|
|
dst_addr_width);
|
|
chan->mem_burst = dst_best_burst;
|
|
ctcr &= ~STM32_MDMA_CTCR_DBURST_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst)));
|
|
|
|
/* Set memory data size */
|
|
src_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen);
|
|
chan->mem_width = src_addr_width;
|
|
src_bus_width = stm32_mdma_get_width(chan, src_addr_width);
|
|
if (src_bus_width < 0)
|
|
return src_bus_width;
|
|
ctcr &= ~STM32_MDMA_CTCR_SSIZE_MASK |
|
|
STM32_MDMA_CTCR_SINCOS_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_SSIZE(src_bus_width) |
|
|
STM32_MDMA_CTCR_SINCOS(src_bus_width);
|
|
|
|
/* Set memory burst value */
|
|
src_maxburst = STM32_MDMA_MAX_BUF_LEN / src_addr_width;
|
|
src_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
|
|
src_maxburst,
|
|
src_addr_width);
|
|
chan->mem_burst = src_best_burst;
|
|
ctcr &= ~STM32_MDMA_CTCR_SBURST_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst)));
|
|
|
|
/* Select bus */
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
|
|
dst_addr);
|
|
|
|
if (dst_bus_width != src_bus_width)
|
|
ctcr |= STM32_MDMA_CTCR_PKE;
|
|
|
|
/* Set destination address */
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CDAR(chan->id), dst_addr);
|
|
break;
|
|
|
|
case DMA_DEV_TO_MEM:
|
|
src_addr = chan->dma_config.src_addr;
|
|
|
|
/* Set device data size */
|
|
if (chan_config->m2m_hw)
|
|
src_addr_width = stm32_mdma_get_max_width(src_addr, buf_len,
|
|
STM32_MDMA_MAX_BUF_LEN);
|
|
|
|
src_bus_width = stm32_mdma_get_width(chan, src_addr_width);
|
|
if (src_bus_width < 0)
|
|
return src_bus_width;
|
|
ctcr &= ~STM32_MDMA_CTCR_SSIZE_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_SSIZE(src_bus_width);
|
|
if (chan_config->m2m_hw) {
|
|
ctcr &= ~STM32_MDMA_CTCR_SINCOS_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_SINCOS(src_bus_width);
|
|
}
|
|
|
|
/* Set device burst value */
|
|
if (chan_config->m2m_hw)
|
|
src_maxburst = STM32_MDMA_MAX_BUF_LEN / src_addr_width;
|
|
|
|
src_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
|
|
src_maxburst,
|
|
src_addr_width);
|
|
ctcr &= ~STM32_MDMA_CTCR_SBURST_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst)));
|
|
|
|
/* Set memory data size */
|
|
dst_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen);
|
|
chan->mem_width = dst_addr_width;
|
|
dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width);
|
|
if (dst_bus_width < 0)
|
|
return dst_bus_width;
|
|
ctcr &= ~(STM32_MDMA_CTCR_DSIZE_MASK |
|
|
STM32_MDMA_CTCR_DINCOS_MASK);
|
|
ctcr |= STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
|
|
STM32_MDMA_CTCR_DINCOS(dst_bus_width);
|
|
|
|
/* Set memory burst value */
|
|
dst_maxburst = STM32_MDMA_MAX_BUF_LEN / dst_addr_width;
|
|
dst_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
|
|
dst_maxburst,
|
|
dst_addr_width);
|
|
ctcr &= ~STM32_MDMA_CTCR_DBURST_MASK;
|
|
ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst)));
|
|
|
|
/* Select bus */
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
|
|
src_addr);
|
|
|
|
if (dst_bus_width != src_bus_width)
|
|
ctcr |= STM32_MDMA_CTCR_PKE;
|
|
|
|
/* Set source address */
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CSAR(chan->id), src_addr);
|
|
break;
|
|
|
|
default:
|
|
dev_err(chan2dev(chan), "Dma direction is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
*mdma_ccr = ccr;
|
|
*mdma_ctcr = ctcr;
|
|
*mdma_ctbr = ctbr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_mdma_dump_hwdesc(struct stm32_mdma_chan *chan,
|
|
struct stm32_mdma_desc_node *node)
|
|
{
|
|
dev_dbg(chan2dev(chan), "hwdesc: %pad\n", &node->hwdesc_phys);
|
|
dev_dbg(chan2dev(chan), "CTCR: 0x%08x\n", node->hwdesc->ctcr);
|
|
dev_dbg(chan2dev(chan), "CBNDTR: 0x%08x\n", node->hwdesc->cbndtr);
|
|
dev_dbg(chan2dev(chan), "CSAR: 0x%08x\n", node->hwdesc->csar);
|
|
dev_dbg(chan2dev(chan), "CDAR: 0x%08x\n", node->hwdesc->cdar);
|
|
dev_dbg(chan2dev(chan), "CBRUR: 0x%08x\n", node->hwdesc->cbrur);
|
|
dev_dbg(chan2dev(chan), "CLAR: 0x%08x\n", node->hwdesc->clar);
|
|
dev_dbg(chan2dev(chan), "CTBR: 0x%08x\n", node->hwdesc->ctbr);
|
|
dev_dbg(chan2dev(chan), "CMAR: 0x%08x\n", node->hwdesc->cmar);
|
|
dev_dbg(chan2dev(chan), "CMDR: 0x%08x\n\n", node->hwdesc->cmdr);
|
|
}
|
|
|
|
static void stm32_mdma_setup_hwdesc(struct stm32_mdma_chan *chan,
|
|
struct stm32_mdma_desc *desc,
|
|
enum dma_transfer_direction dir, u32 count,
|
|
dma_addr_t src_addr, dma_addr_t dst_addr,
|
|
u32 len, u32 ctcr, u32 ctbr, bool is_last,
|
|
bool is_first, bool is_cyclic)
|
|
{
|
|
struct stm32_mdma_chan_config *config = &chan->chan_config;
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
u32 next = count + 1;
|
|
|
|
hwdesc = desc->node[count].hwdesc;
|
|
hwdesc->ctcr = ctcr;
|
|
hwdesc->cbndtr &= ~(STM32_MDMA_CBNDTR_BRC_MK |
|
|
STM32_MDMA_CBNDTR_BRDUM |
|
|
STM32_MDMA_CBNDTR_BRSUM |
|
|
STM32_MDMA_CBNDTR_BNDT_MASK);
|
|
hwdesc->cbndtr |= STM32_MDMA_CBNDTR_BNDT(len);
|
|
hwdesc->csar = src_addr;
|
|
hwdesc->cdar = dst_addr;
|
|
hwdesc->cbrur = 0;
|
|
hwdesc->ctbr = ctbr;
|
|
hwdesc->cmar = config->mask_addr;
|
|
hwdesc->cmdr = config->mask_data;
|
|
|
|
if (is_last) {
|
|
if (is_cyclic)
|
|
hwdesc->clar = desc->node[0].hwdesc_phys;
|
|
else
|
|
hwdesc->clar = 0;
|
|
} else {
|
|
hwdesc->clar = desc->node[next].hwdesc_phys;
|
|
}
|
|
|
|
stm32_mdma_dump_hwdesc(chan, &desc->node[count]);
|
|
}
|
|
|
|
static int stm32_mdma_setup_xfer(struct stm32_mdma_chan *chan,
|
|
struct stm32_mdma_desc *desc,
|
|
struct scatterlist *sgl, u32 sg_len,
|
|
enum dma_transfer_direction direction)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct dma_slave_config *dma_config = &chan->dma_config;
|
|
struct stm32_mdma_chan_config *chan_config = &chan->chan_config;
|
|
struct scatterlist *sg;
|
|
dma_addr_t src_addr, dst_addr;
|
|
u32 m2m_hw_period, ccr, ctcr, ctbr;
|
|
int i, ret = 0;
|
|
|
|
if (chan_config->m2m_hw)
|
|
m2m_hw_period = sg_dma_len(sgl);
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
if (sg_dma_len(sg) > STM32_MDMA_MAX_BLOCK_LEN) {
|
|
dev_err(chan2dev(chan), "Invalid block len\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (direction == DMA_MEM_TO_DEV) {
|
|
src_addr = sg_dma_address(sg);
|
|
dst_addr = dma_config->dst_addr;
|
|
if (chan_config->m2m_hw && (i & 1))
|
|
dst_addr += m2m_hw_period;
|
|
ret = stm32_mdma_set_xfer_param(chan, direction, &ccr,
|
|
&ctcr, &ctbr, src_addr,
|
|
sg_dma_len(sg));
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
|
|
src_addr);
|
|
} else {
|
|
src_addr = dma_config->src_addr;
|
|
if (chan_config->m2m_hw && (i & 1))
|
|
src_addr += m2m_hw_period;
|
|
dst_addr = sg_dma_address(sg);
|
|
ret = stm32_mdma_set_xfer_param(chan, direction, &ccr,
|
|
&ctcr, &ctbr, dst_addr,
|
|
sg_dma_len(sg));
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
|
|
dst_addr);
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
stm32_mdma_setup_hwdesc(chan, desc, direction, i, src_addr,
|
|
dst_addr, sg_dma_len(sg), ctcr, ctbr,
|
|
i == sg_len - 1, i == 0, false);
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
ccr &= ~STM32_MDMA_CCR_IRQ_MASK;
|
|
ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE;
|
|
if (sg_len > 1)
|
|
ccr |= STM32_MDMA_CCR_BTIE;
|
|
desc->ccr = ccr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
stm32_mdma_prep_slave_sg(struct dma_chan *c, struct scatterlist *sgl,
|
|
u32 sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_chan_config *chan_config = &chan->chan_config;
|
|
struct stm32_mdma_desc *desc;
|
|
int i, ret;
|
|
|
|
/*
|
|
* Once DMA is in setup cyclic mode the channel we cannot assign this
|
|
* channel anymore. The DMA channel needs to be aborted or terminated
|
|
* for allowing another request.
|
|
*/
|
|
if (chan->desc && chan->desc->cyclic) {
|
|
dev_err(chan2dev(chan),
|
|
"Request not allowed when dma in cyclic mode\n");
|
|
return NULL;
|
|
}
|
|
|
|
desc = stm32_mdma_alloc_desc(chan, sg_len);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
ret = stm32_mdma_setup_xfer(chan, desc, sgl, sg_len, direction);
|
|
if (ret < 0)
|
|
goto xfer_setup_err;
|
|
|
|
/*
|
|
* In case of M2M HW transfer triggered by STM32 DMA, we do not have to clear the
|
|
* transfer complete flag by hardware in order to let the CPU rearm the STM32 DMA
|
|
* with the next sg element and update some data in dmaengine framework.
|
|
*/
|
|
if (chan_config->m2m_hw && direction == DMA_MEM_TO_DEV) {
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
|
|
for (i = 0; i < sg_len; i++) {
|
|
hwdesc = desc->node[i].hwdesc;
|
|
hwdesc->cmar = 0;
|
|
hwdesc->cmdr = 0;
|
|
}
|
|
}
|
|
|
|
desc->cyclic = false;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
|
|
xfer_setup_err:
|
|
for (i = 0; i < desc->count; i++)
|
|
dma_pool_free(chan->desc_pool, desc->node[i].hwdesc,
|
|
desc->node[i].hwdesc_phys);
|
|
kfree(desc);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
stm32_mdma_prep_dma_cyclic(struct dma_chan *c, dma_addr_t buf_addr,
|
|
size_t buf_len, size_t period_len,
|
|
enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct dma_slave_config *dma_config = &chan->dma_config;
|
|
struct stm32_mdma_chan_config *chan_config = &chan->chan_config;
|
|
struct stm32_mdma_desc *desc;
|
|
dma_addr_t src_addr, dst_addr;
|
|
u32 ccr, ctcr, ctbr, count;
|
|
int i, ret;
|
|
|
|
/*
|
|
* Once DMA is in setup cyclic mode the channel we cannot assign this
|
|
* channel anymore. The DMA channel needs to be aborted or terminated
|
|
* for allowing another request.
|
|
*/
|
|
if (chan->desc && chan->desc->cyclic) {
|
|
dev_err(chan2dev(chan),
|
|
"Request not allowed when dma in cyclic mode\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (!buf_len || !period_len || period_len > STM32_MDMA_MAX_BLOCK_LEN) {
|
|
dev_err(chan2dev(chan), "Invalid buffer/period len\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (buf_len % period_len) {
|
|
dev_err(chan2dev(chan), "buf_len not multiple of period_len\n");
|
|
return NULL;
|
|
}
|
|
|
|
count = buf_len / period_len;
|
|
|
|
desc = stm32_mdma_alloc_desc(chan, count);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
/* Select bus */
|
|
if (direction == DMA_MEM_TO_DEV) {
|
|
src_addr = buf_addr;
|
|
ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr,
|
|
&ctbr, src_addr, period_len);
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
|
|
src_addr);
|
|
} else {
|
|
dst_addr = buf_addr;
|
|
ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr,
|
|
&ctbr, dst_addr, period_len);
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
|
|
dst_addr);
|
|
}
|
|
|
|
if (ret < 0)
|
|
goto xfer_setup_err;
|
|
|
|
/* Enable interrupts */
|
|
ccr &= ~STM32_MDMA_CCR_IRQ_MASK;
|
|
ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE | STM32_MDMA_CCR_BTIE;
|
|
desc->ccr = ccr;
|
|
|
|
/* Configure hwdesc list */
|
|
for (i = 0; i < count; i++) {
|
|
if (direction == DMA_MEM_TO_DEV) {
|
|
src_addr = buf_addr + i * period_len;
|
|
dst_addr = dma_config->dst_addr;
|
|
if (chan_config->m2m_hw && (i & 1))
|
|
dst_addr += period_len;
|
|
} else {
|
|
src_addr = dma_config->src_addr;
|
|
if (chan_config->m2m_hw && (i & 1))
|
|
src_addr += period_len;
|
|
dst_addr = buf_addr + i * period_len;
|
|
}
|
|
|
|
stm32_mdma_setup_hwdesc(chan, desc, direction, i, src_addr,
|
|
dst_addr, period_len, ctcr, ctbr,
|
|
i == count - 1, i == 0, true);
|
|
}
|
|
|
|
desc->cyclic = true;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
|
|
xfer_setup_err:
|
|
for (i = 0; i < desc->count; i++)
|
|
dma_pool_free(chan->desc_pool, desc->node[i].hwdesc,
|
|
desc->node[i].hwdesc_phys);
|
|
kfree(desc);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *
|
|
stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
|
|
size_t len, unsigned long flags)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
enum dma_slave_buswidth max_width;
|
|
struct stm32_mdma_desc *desc;
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
u32 ccr, ctcr, ctbr, cbndtr, count, max_burst, mdma_burst;
|
|
u32 best_burst, tlen;
|
|
size_t xfer_count, offset;
|
|
int src_bus_width, dst_bus_width;
|
|
int i;
|
|
|
|
/*
|
|
* Once DMA is in setup cyclic mode the channel we cannot assign this
|
|
* channel anymore. The DMA channel needs to be aborted or terminated
|
|
* to allow another request
|
|
*/
|
|
if (chan->desc && chan->desc->cyclic) {
|
|
dev_err(chan2dev(chan),
|
|
"Request not allowed when dma in cyclic mode\n");
|
|
return NULL;
|
|
}
|
|
|
|
count = DIV_ROUND_UP(len, STM32_MDMA_MAX_BLOCK_LEN);
|
|
desc = stm32_mdma_alloc_desc(chan, count);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
|
|
ctcr = stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id));
|
|
ctbr = stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id));
|
|
cbndtr = stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id));
|
|
|
|
/* Enable sw req, some interrupts and clear other bits */
|
|
ccr &= ~(STM32_MDMA_CCR_WEX | STM32_MDMA_CCR_HEX |
|
|
STM32_MDMA_CCR_BEX | STM32_MDMA_CCR_PL_MASK |
|
|
STM32_MDMA_CCR_IRQ_MASK);
|
|
ccr |= STM32_MDMA_CCR_TEIE;
|
|
|
|
/* Enable SW request mode, dest/src inc and clear other bits */
|
|
ctcr &= ~(STM32_MDMA_CTCR_BWM | STM32_MDMA_CTCR_TRGM_MSK |
|
|
STM32_MDMA_CTCR_PAM_MASK | STM32_MDMA_CTCR_PKE |
|
|
STM32_MDMA_CTCR_TLEN_MSK | STM32_MDMA_CTCR_DBURST_MASK |
|
|
STM32_MDMA_CTCR_SBURST_MASK | STM32_MDMA_CTCR_DINCOS_MASK |
|
|
STM32_MDMA_CTCR_SINCOS_MASK | STM32_MDMA_CTCR_DSIZE_MASK |
|
|
STM32_MDMA_CTCR_SSIZE_MASK | STM32_MDMA_CTCR_DINC_MASK |
|
|
STM32_MDMA_CTCR_SINC_MASK);
|
|
ctcr |= STM32_MDMA_CTCR_SWRM | STM32_MDMA_CTCR_SINC(STM32_MDMA_INC) |
|
|
STM32_MDMA_CTCR_DINC(STM32_MDMA_INC);
|
|
|
|
/* Reset HW request */
|
|
ctbr &= ~STM32_MDMA_CTBR_TSEL_MASK;
|
|
|
|
/* Select bus */
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS, src);
|
|
stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS, dest);
|
|
|
|
/* Clear CBNDTR registers */
|
|
cbndtr &= ~(STM32_MDMA_CBNDTR_BRC_MK | STM32_MDMA_CBNDTR_BRDUM |
|
|
STM32_MDMA_CBNDTR_BRSUM | STM32_MDMA_CBNDTR_BNDT_MASK);
|
|
|
|
if (len <= STM32_MDMA_MAX_BLOCK_LEN) {
|
|
cbndtr |= STM32_MDMA_CBNDTR_BNDT(len);
|
|
if (len <= STM32_MDMA_MAX_BUF_LEN) {
|
|
/* Setup a buffer transfer */
|
|
ccr |= STM32_MDMA_CCR_TCIE | STM32_MDMA_CCR_CTCIE;
|
|
ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_BUFFER);
|
|
} else {
|
|
/* Setup a block transfer */
|
|
ccr |= STM32_MDMA_CCR_BTIE | STM32_MDMA_CCR_CTCIE;
|
|
ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_BLOCK);
|
|
}
|
|
|
|
tlen = STM32_MDMA_MAX_BUF_LEN;
|
|
ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1));
|
|
|
|
/* Set source best burst size */
|
|
max_width = stm32_mdma_get_max_width(src, len, tlen);
|
|
src_bus_width = stm32_mdma_get_width(chan, max_width);
|
|
|
|
max_burst = tlen / max_width;
|
|
best_burst = stm32_mdma_get_best_burst(len, tlen, max_burst,
|
|
max_width);
|
|
mdma_burst = ilog2(best_burst);
|
|
|
|
ctcr |= STM32_MDMA_CTCR_SBURST(mdma_burst) |
|
|
STM32_MDMA_CTCR_SSIZE(src_bus_width) |
|
|
STM32_MDMA_CTCR_SINCOS(src_bus_width);
|
|
|
|
/* Set destination best burst size */
|
|
max_width = stm32_mdma_get_max_width(dest, len, tlen);
|
|
dst_bus_width = stm32_mdma_get_width(chan, max_width);
|
|
|
|
max_burst = tlen / max_width;
|
|
best_burst = stm32_mdma_get_best_burst(len, tlen, max_burst,
|
|
max_width);
|
|
mdma_burst = ilog2(best_burst);
|
|
|
|
ctcr |= STM32_MDMA_CTCR_DBURST(mdma_burst) |
|
|
STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
|
|
STM32_MDMA_CTCR_DINCOS(dst_bus_width);
|
|
|
|
if (dst_bus_width != src_bus_width)
|
|
ctcr |= STM32_MDMA_CTCR_PKE;
|
|
|
|
/* Prepare hardware descriptor */
|
|
hwdesc = desc->node[0].hwdesc;
|
|
hwdesc->ctcr = ctcr;
|
|
hwdesc->cbndtr = cbndtr;
|
|
hwdesc->csar = src;
|
|
hwdesc->cdar = dest;
|
|
hwdesc->cbrur = 0;
|
|
hwdesc->clar = 0;
|
|
hwdesc->ctbr = ctbr;
|
|
hwdesc->cmar = 0;
|
|
hwdesc->cmdr = 0;
|
|
|
|
stm32_mdma_dump_hwdesc(chan, &desc->node[0]);
|
|
} else {
|
|
/* Setup a LLI transfer */
|
|
ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_LINKED_LIST) |
|
|
STM32_MDMA_CTCR_TLEN((STM32_MDMA_MAX_BUF_LEN - 1));
|
|
ccr |= STM32_MDMA_CCR_BTIE | STM32_MDMA_CCR_CTCIE;
|
|
tlen = STM32_MDMA_MAX_BUF_LEN;
|
|
|
|
for (i = 0, offset = 0; offset < len;
|
|
i++, offset += xfer_count) {
|
|
xfer_count = min_t(size_t, len - offset,
|
|
STM32_MDMA_MAX_BLOCK_LEN);
|
|
|
|
/* Set source best burst size */
|
|
max_width = stm32_mdma_get_max_width(src, len, tlen);
|
|
src_bus_width = stm32_mdma_get_width(chan, max_width);
|
|
|
|
max_burst = tlen / max_width;
|
|
best_burst = stm32_mdma_get_best_burst(len, tlen,
|
|
max_burst,
|
|
max_width);
|
|
mdma_burst = ilog2(best_burst);
|
|
|
|
ctcr |= STM32_MDMA_CTCR_SBURST(mdma_burst) |
|
|
STM32_MDMA_CTCR_SSIZE(src_bus_width) |
|
|
STM32_MDMA_CTCR_SINCOS(src_bus_width);
|
|
|
|
/* Set destination best burst size */
|
|
max_width = stm32_mdma_get_max_width(dest, len, tlen);
|
|
dst_bus_width = stm32_mdma_get_width(chan, max_width);
|
|
|
|
max_burst = tlen / max_width;
|
|
best_burst = stm32_mdma_get_best_burst(len, tlen,
|
|
max_burst,
|
|
max_width);
|
|
mdma_burst = ilog2(best_burst);
|
|
|
|
ctcr |= STM32_MDMA_CTCR_DBURST(mdma_burst) |
|
|
STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
|
|
STM32_MDMA_CTCR_DINCOS(dst_bus_width);
|
|
|
|
if (dst_bus_width != src_bus_width)
|
|
ctcr |= STM32_MDMA_CTCR_PKE;
|
|
|
|
/* Prepare hardware descriptor */
|
|
stm32_mdma_setup_hwdesc(chan, desc, DMA_MEM_TO_MEM, i,
|
|
src + offset, dest + offset,
|
|
xfer_count, ctcr, ctbr,
|
|
i == count - 1, i == 0, false);
|
|
}
|
|
}
|
|
|
|
desc->ccr = ccr;
|
|
|
|
desc->cyclic = false;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
}
|
|
|
|
static void stm32_mdma_dump_reg(struct stm32_mdma_chan *chan)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
|
|
dev_dbg(chan2dev(chan), "CCR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CTCR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CBNDTR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CSAR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CSAR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CDAR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CDAR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CBRUR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CBRUR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CLAR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CLAR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CTBR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CMAR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CMAR(chan->id)));
|
|
dev_dbg(chan2dev(chan), "CMDR: 0x%08x\n",
|
|
stm32_mdma_read(dmadev, STM32_MDMA_CMDR(chan->id)));
|
|
}
|
|
|
|
static void stm32_mdma_start_transfer(struct stm32_mdma_chan *chan)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct virt_dma_desc *vdesc;
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
u32 id = chan->id;
|
|
u32 status, reg;
|
|
|
|
vdesc = vchan_next_desc(&chan->vchan);
|
|
if (!vdesc) {
|
|
chan->desc = NULL;
|
|
return;
|
|
}
|
|
|
|
list_del(&vdesc->node);
|
|
|
|
chan->desc = to_stm32_mdma_desc(vdesc);
|
|
hwdesc = chan->desc->node[0].hwdesc;
|
|
chan->curr_hwdesc = 0;
|
|
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CCR(id), chan->desc->ccr);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CTCR(id), hwdesc->ctcr);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CBNDTR(id), hwdesc->cbndtr);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CSAR(id), hwdesc->csar);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CDAR(id), hwdesc->cdar);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CBRUR(id), hwdesc->cbrur);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CLAR(id), hwdesc->clar);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CTBR(id), hwdesc->ctbr);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CMAR(id), hwdesc->cmar);
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CMDR(id), hwdesc->cmdr);
|
|
|
|
/* Clear interrupt status if it is there */
|
|
status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(id));
|
|
if (status)
|
|
stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(id), status);
|
|
|
|
stm32_mdma_dump_reg(chan);
|
|
|
|
/* Start DMA */
|
|
stm32_mdma_set_bits(dmadev, STM32_MDMA_CCR(id), STM32_MDMA_CCR_EN);
|
|
|
|
/* Set SW request in case of MEM2MEM transfer */
|
|
if (hwdesc->ctcr & STM32_MDMA_CTCR_SWRM) {
|
|
reg = STM32_MDMA_CCR(id);
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_SWRQ);
|
|
}
|
|
|
|
chan->busy = true;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %pK: started\n", &chan->vchan);
|
|
}
|
|
|
|
static void stm32_mdma_issue_pending(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
|
|
if (!vchan_issue_pending(&chan->vchan))
|
|
goto end;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %pK: issued\n", &chan->vchan);
|
|
|
|
if (!chan->desc && !chan->busy)
|
|
stm32_mdma_start_transfer(chan);
|
|
|
|
end:
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
}
|
|
|
|
static int stm32_mdma_pause(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
ret = stm32_mdma_disable_chan(chan);
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
if (!ret)
|
|
dev_dbg(chan2dev(chan), "vchan %pK: pause\n", &chan->vchan);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_mdma_resume(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
unsigned long flags;
|
|
u32 status, reg;
|
|
|
|
hwdesc = chan->desc->node[chan->curr_hwdesc].hwdesc;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
|
|
/* Re-configure control register */
|
|
stm32_mdma_write(dmadev, STM32_MDMA_CCR(chan->id), chan->desc->ccr);
|
|
|
|
/* Clear interrupt status if it is there */
|
|
status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
|
|
if (status)
|
|
stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(chan->id), status);
|
|
|
|
stm32_mdma_dump_reg(chan);
|
|
|
|
/* Re-start DMA */
|
|
reg = STM32_MDMA_CCR(chan->id);
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_EN);
|
|
|
|
/* Set SW request in case of MEM2MEM transfer */
|
|
if (hwdesc->ctcr & STM32_MDMA_CTCR_SWRM)
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_SWRQ);
|
|
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %pK: resume\n", &chan->vchan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_mdma_terminate_all(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
unsigned long flags;
|
|
LIST_HEAD(head);
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
if (chan->desc) {
|
|
vchan_terminate_vdesc(&chan->desc->vdesc);
|
|
if (chan->busy)
|
|
stm32_mdma_stop(chan);
|
|
chan->desc = NULL;
|
|
}
|
|
vchan_get_all_descriptors(&chan->vchan, &head);
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
vchan_dma_desc_free_list(&chan->vchan, &head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_mdma_synchronize(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
|
|
vchan_synchronize(&chan->vchan);
|
|
}
|
|
|
|
static int stm32_mdma_slave_config(struct dma_chan *c,
|
|
struct dma_slave_config *config)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
|
|
memcpy(&chan->dma_config, config, sizeof(*config));
|
|
|
|
/* Check if user is requesting STM32 DMA to trigger MDMA */
|
|
if (config->peripheral_size) {
|
|
struct stm32_mdma_dma_config *mdma_config;
|
|
|
|
mdma_config = (struct stm32_mdma_dma_config *)chan->dma_config.peripheral_config;
|
|
chan->chan_config.request = mdma_config->request;
|
|
chan->chan_config.mask_addr = mdma_config->cmar;
|
|
chan->chan_config.mask_data = mdma_config->cmdr;
|
|
chan->chan_config.m2m_hw = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static size_t stm32_mdma_desc_residue(struct stm32_mdma_chan *chan,
|
|
struct stm32_mdma_desc *desc,
|
|
u32 curr_hwdesc)
|
|
{
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
struct stm32_mdma_hwdesc *hwdesc;
|
|
u32 cbndtr, residue, modulo, burst_size;
|
|
int i;
|
|
|
|
residue = 0;
|
|
for (i = curr_hwdesc + 1; i < desc->count; i++) {
|
|
hwdesc = desc->node[i].hwdesc;
|
|
residue += STM32_MDMA_CBNDTR_BNDT(hwdesc->cbndtr);
|
|
}
|
|
cbndtr = stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id));
|
|
residue += cbndtr & STM32_MDMA_CBNDTR_BNDT_MASK;
|
|
|
|
if (!chan->mem_burst)
|
|
return residue;
|
|
|
|
burst_size = chan->mem_burst * chan->mem_width;
|
|
modulo = residue % burst_size;
|
|
if (modulo)
|
|
residue = residue - modulo + burst_size;
|
|
|
|
return residue;
|
|
}
|
|
|
|
static enum dma_status stm32_mdma_tx_status(struct dma_chan *c,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *state)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct virt_dma_desc *vdesc;
|
|
enum dma_status status;
|
|
unsigned long flags;
|
|
u32 residue = 0;
|
|
|
|
status = dma_cookie_status(c, cookie, state);
|
|
if ((status == DMA_COMPLETE) || (!state))
|
|
return status;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
|
|
vdesc = vchan_find_desc(&chan->vchan, cookie);
|
|
if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
|
|
residue = stm32_mdma_desc_residue(chan, chan->desc,
|
|
chan->curr_hwdesc);
|
|
else if (vdesc)
|
|
residue = stm32_mdma_desc_residue(chan,
|
|
to_stm32_mdma_desc(vdesc), 0);
|
|
dma_set_residue(state, residue);
|
|
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static void stm32_mdma_xfer_end(struct stm32_mdma_chan *chan)
|
|
{
|
|
vchan_cookie_complete(&chan->desc->vdesc);
|
|
chan->desc = NULL;
|
|
chan->busy = false;
|
|
|
|
/* Start the next transfer if this driver has a next desc */
|
|
stm32_mdma_start_transfer(chan);
|
|
}
|
|
|
|
static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)
|
|
{
|
|
struct stm32_mdma_device *dmadev = devid;
|
|
struct stm32_mdma_chan *chan;
|
|
u32 reg, id, ccr, ien, status;
|
|
|
|
/* Find out which channel generates the interrupt */
|
|
status = readl_relaxed(dmadev->base + STM32_MDMA_GISR0);
|
|
if (!status) {
|
|
dev_dbg(mdma2dev(dmadev), "spurious it\n");
|
|
return IRQ_NONE;
|
|
}
|
|
id = __ffs(status);
|
|
chan = &dmadev->chan[id];
|
|
|
|
/* Handle interrupt for the channel */
|
|
spin_lock(&chan->vchan.lock);
|
|
status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(id));
|
|
/* Mask Channel ReQuest Active bit which can be set in case of MEM2MEM */
|
|
status &= ~STM32_MDMA_CISR_CRQA;
|
|
ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(id));
|
|
ien = (ccr & STM32_MDMA_CCR_IRQ_MASK) >> 1;
|
|
|
|
if (!(status & ien)) {
|
|
spin_unlock(&chan->vchan.lock);
|
|
if (chan->busy)
|
|
dev_warn(chan2dev(chan),
|
|
"spurious it (status=0x%04x, ien=0x%04x)\n", status, ien);
|
|
else
|
|
dev_dbg(chan2dev(chan),
|
|
"spurious it (status=0x%04x, ien=0x%04x)\n", status, ien);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
reg = STM32_MDMA_CIFCR(id);
|
|
|
|
if (status & STM32_MDMA_CISR_TEIF) {
|
|
dev_err(chan2dev(chan), "Transfer Err: stat=0x%08x\n",
|
|
readl_relaxed(dmadev->base + STM32_MDMA_CESR(id)));
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CTEIF);
|
|
status &= ~STM32_MDMA_CISR_TEIF;
|
|
}
|
|
|
|
if (status & STM32_MDMA_CISR_CTCIF) {
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CCTCIF);
|
|
status &= ~STM32_MDMA_CISR_CTCIF;
|
|
stm32_mdma_xfer_end(chan);
|
|
}
|
|
|
|
if (status & STM32_MDMA_CISR_BRTIF) {
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBRTIF);
|
|
status &= ~STM32_MDMA_CISR_BRTIF;
|
|
}
|
|
|
|
if (status & STM32_MDMA_CISR_BTIF) {
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBTIF);
|
|
status &= ~STM32_MDMA_CISR_BTIF;
|
|
chan->curr_hwdesc++;
|
|
if (chan->desc && chan->desc->cyclic) {
|
|
if (chan->curr_hwdesc == chan->desc->count)
|
|
chan->curr_hwdesc = 0;
|
|
vchan_cyclic_callback(&chan->desc->vdesc);
|
|
}
|
|
}
|
|
|
|
if (status & STM32_MDMA_CISR_TCIF) {
|
|
stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CLTCIF);
|
|
status &= ~STM32_MDMA_CISR_TCIF;
|
|
}
|
|
|
|
if (status) {
|
|
stm32_mdma_set_bits(dmadev, reg, status);
|
|
dev_err(chan2dev(chan), "DMA error: status=0x%08x\n", status);
|
|
if (!(ccr & STM32_MDMA_CCR_EN))
|
|
dev_err(chan2dev(chan), "chan disabled by HW\n");
|
|
}
|
|
|
|
spin_unlock(&chan->vchan.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int stm32_mdma_alloc_chan_resources(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
int ret;
|
|
|
|
chan->desc_pool = dmam_pool_create(dev_name(&c->dev->device),
|
|
c->device->dev,
|
|
sizeof(struct stm32_mdma_hwdesc),
|
|
__alignof__(struct stm32_mdma_hwdesc),
|
|
0);
|
|
if (!chan->desc_pool) {
|
|
dev_err(chan2dev(chan), "failed to allocate descriptor pool\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = pm_runtime_resume_and_get(dmadev->ddev.dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = stm32_mdma_disable_chan(chan);
|
|
if (ret < 0)
|
|
pm_runtime_put(dmadev->ddev.dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stm32_mdma_free_chan_resources(struct dma_chan *c)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
unsigned long flags;
|
|
|
|
dev_dbg(chan2dev(chan), "Freeing channel %d\n", chan->id);
|
|
|
|
if (chan->busy) {
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
stm32_mdma_stop(chan);
|
|
chan->desc = NULL;
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
}
|
|
|
|
pm_runtime_put(dmadev->ddev.dev);
|
|
vchan_free_chan_resources(to_virt_chan(c));
|
|
dmam_pool_destroy(chan->desc_pool);
|
|
chan->desc_pool = NULL;
|
|
}
|
|
|
|
static bool stm32_mdma_filter_fn(struct dma_chan *c, void *fn_param)
|
|
{
|
|
struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
|
|
struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
|
|
|
|
/* Check if chan is marked Secure */
|
|
if (dmadev->chan_reserved & BIT(chan->id))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static struct dma_chan *stm32_mdma_of_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct stm32_mdma_device *dmadev = ofdma->of_dma_data;
|
|
dma_cap_mask_t mask = dmadev->ddev.cap_mask;
|
|
struct stm32_mdma_chan *chan;
|
|
struct dma_chan *c;
|
|
struct stm32_mdma_chan_config config;
|
|
|
|
if (dma_spec->args_count < 5) {
|
|
dev_err(mdma2dev(dmadev), "Bad number of args\n");
|
|
return NULL;
|
|
}
|
|
|
|
memset(&config, 0, sizeof(config));
|
|
config.request = dma_spec->args[0];
|
|
config.priority_level = dma_spec->args[1];
|
|
config.transfer_config = dma_spec->args[2];
|
|
config.mask_addr = dma_spec->args[3];
|
|
config.mask_data = dma_spec->args[4];
|
|
|
|
if (config.request >= dmadev->nr_requests) {
|
|
dev_err(mdma2dev(dmadev), "Bad request line\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (config.priority_level > STM32_MDMA_VERY_HIGH_PRIORITY) {
|
|
dev_err(mdma2dev(dmadev), "Priority level not supported\n");
|
|
return NULL;
|
|
}
|
|
|
|
c = __dma_request_channel(&mask, stm32_mdma_filter_fn, &config, ofdma->of_node);
|
|
if (!c) {
|
|
dev_err(mdma2dev(dmadev), "No more channels available\n");
|
|
return NULL;
|
|
}
|
|
|
|
chan = to_stm32_mdma_chan(c);
|
|
chan->chan_config = config;
|
|
|
|
return c;
|
|
}
|
|
|
|
static const struct of_device_id stm32_mdma_of_match[] = {
|
|
{ .compatible = "st,stm32h7-mdma", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_mdma_of_match);
|
|
|
|
static int stm32_mdma_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_mdma_chan *chan;
|
|
struct stm32_mdma_device *dmadev;
|
|
struct dma_device *dd;
|
|
struct device_node *of_node;
|
|
struct reset_control *rst;
|
|
u32 nr_channels, nr_requests;
|
|
int i, count, ret;
|
|
|
|
of_node = pdev->dev.of_node;
|
|
if (!of_node)
|
|
return -ENODEV;
|
|
|
|
ret = device_property_read_u32(&pdev->dev, "dma-channels",
|
|
&nr_channels);
|
|
if (ret) {
|
|
nr_channels = STM32_MDMA_MAX_CHANNELS;
|
|
dev_warn(&pdev->dev, "MDMA defaulting on %i channels\n",
|
|
nr_channels);
|
|
}
|
|
|
|
ret = device_property_read_u32(&pdev->dev, "dma-requests",
|
|
&nr_requests);
|
|
if (ret) {
|
|
nr_requests = STM32_MDMA_MAX_REQUESTS;
|
|
dev_warn(&pdev->dev, "MDMA defaulting on %i request lines\n",
|
|
nr_requests);
|
|
}
|
|
|
|
count = device_property_count_u32(&pdev->dev, "st,ahb-addr-masks");
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
dmadev = devm_kzalloc(&pdev->dev,
|
|
struct_size(dmadev, ahb_addr_masks, count),
|
|
GFP_KERNEL);
|
|
if (!dmadev)
|
|
return -ENOMEM;
|
|
|
|
dmadev->nr_channels = nr_channels;
|
|
dmadev->nr_requests = nr_requests;
|
|
device_property_read_u32_array(&pdev->dev, "st,ahb-addr-masks",
|
|
dmadev->ahb_addr_masks,
|
|
count);
|
|
dmadev->nr_ahb_addr_masks = count;
|
|
|
|
dmadev->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(dmadev->base))
|
|
return PTR_ERR(dmadev->base);
|
|
|
|
dmadev->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(dmadev->clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(dmadev->clk),
|
|
"Missing clock controller\n");
|
|
|
|
ret = clk_prepare_enable(dmadev->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rst = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (IS_ERR(rst)) {
|
|
ret = PTR_ERR(rst);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto err_clk;
|
|
} else {
|
|
reset_control_assert(rst);
|
|
udelay(2);
|
|
reset_control_deassert(rst);
|
|
}
|
|
|
|
dd = &dmadev->ddev;
|
|
dma_cap_set(DMA_SLAVE, dd->cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, dd->cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, dd->cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, dd->cap_mask);
|
|
dd->device_alloc_chan_resources = stm32_mdma_alloc_chan_resources;
|
|
dd->device_free_chan_resources = stm32_mdma_free_chan_resources;
|
|
dd->device_tx_status = stm32_mdma_tx_status;
|
|
dd->device_issue_pending = stm32_mdma_issue_pending;
|
|
dd->device_prep_slave_sg = stm32_mdma_prep_slave_sg;
|
|
dd->device_prep_dma_cyclic = stm32_mdma_prep_dma_cyclic;
|
|
dd->device_prep_dma_memcpy = stm32_mdma_prep_dma_memcpy;
|
|
dd->device_config = stm32_mdma_slave_config;
|
|
dd->device_pause = stm32_mdma_pause;
|
|
dd->device_resume = stm32_mdma_resume;
|
|
dd->device_terminate_all = stm32_mdma_terminate_all;
|
|
dd->device_synchronize = stm32_mdma_synchronize;
|
|
dd->descriptor_reuse = true;
|
|
|
|
dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
|
|
dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
|
|
dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
|
|
BIT(DMA_MEM_TO_MEM);
|
|
dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
dd->max_burst = STM32_MDMA_MAX_BURST;
|
|
dd->dev = &pdev->dev;
|
|
INIT_LIST_HEAD(&dd->channels);
|
|
|
|
for (i = 0; i < dmadev->nr_channels; i++) {
|
|
chan = &dmadev->chan[i];
|
|
chan->id = i;
|
|
|
|
if (stm32_mdma_read(dmadev, STM32_MDMA_CCR(i)) & STM32_MDMA_CCR_SM)
|
|
dmadev->chan_reserved |= BIT(i);
|
|
|
|
chan->vchan.desc_free = stm32_mdma_desc_free;
|
|
vchan_init(&chan->vchan, dd);
|
|
}
|
|
|
|
dmadev->irq = platform_get_irq(pdev, 0);
|
|
if (dmadev->irq < 0) {
|
|
ret = dmadev->irq;
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, dmadev->irq, stm32_mdma_irq_handler,
|
|
0, dev_name(&pdev->dev), dmadev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request IRQ\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = dmaenginem_async_device_register(dd);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
ret = of_dma_controller_register(of_node, stm32_mdma_of_xlate, dmadev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"STM32 MDMA DMA OF registration failed %d\n", ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, dmadev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
pm_runtime_put(&pdev->dev);
|
|
|
|
dev_info(&pdev->dev, "STM32 MDMA driver registered\n");
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(dmadev->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int stm32_mdma_runtime_suspend(struct device *dev)
|
|
{
|
|
struct stm32_mdma_device *dmadev = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(dmadev->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_mdma_runtime_resume(struct device *dev)
|
|
{
|
|
struct stm32_mdma_device *dmadev = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(dmadev->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to prepare_enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int stm32_mdma_pm_suspend(struct device *dev)
|
|
{
|
|
struct stm32_mdma_device *dmadev = dev_get_drvdata(dev);
|
|
u32 ccr, id;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (id = 0; id < dmadev->nr_channels; id++) {
|
|
ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(id));
|
|
if (ccr & STM32_MDMA_CCR_EN) {
|
|
dev_warn(dev, "Suspend is prevented by Chan %i\n", id);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
pm_runtime_put_sync(dev);
|
|
|
|
pm_runtime_force_suspend(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_mdma_pm_resume(struct device *dev)
|
|
{
|
|
return pm_runtime_force_resume(dev);
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops stm32_mdma_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(stm32_mdma_pm_suspend, stm32_mdma_pm_resume)
|
|
SET_RUNTIME_PM_OPS(stm32_mdma_runtime_suspend,
|
|
stm32_mdma_runtime_resume, NULL)
|
|
};
|
|
|
|
static struct platform_driver stm32_mdma_driver = {
|
|
.probe = stm32_mdma_probe,
|
|
.driver = {
|
|
.name = "stm32-mdma",
|
|
.of_match_table = stm32_mdma_of_match,
|
|
.pm = &stm32_mdma_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init stm32_mdma_init(void)
|
|
{
|
|
return platform_driver_register(&stm32_mdma_driver);
|
|
}
|
|
|
|
subsys_initcall(stm32_mdma_init);
|
|
|
|
MODULE_DESCRIPTION("Driver for STM32 MDMA controller");
|
|
MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
|
|
MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
|