linux-zen-desktop/drivers/fpga/lattice-sysconfig.h

40 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LATTICE_SYSCONFIG_H
#define __LATTICE_SYSCONFIG_H
#define SYSCONFIG_ISC_ENABLE {0xC6, 0x00, 0x00, 0x00}
#define SYSCONFIG_ISC_DISABLE {0x26, 0x00, 0x00, 0x00}
#define SYSCONFIG_ISC_ERASE {0x0E, 0x01, 0x00, 0x00}
#define SYSCONFIG_LSC_READ_STATUS {0x3C, 0x00, 0x00, 0x00}
#define SYSCONFIG_LSC_CHECK_BUSY {0xF0, 0x00, 0x00, 0x00}
#define SYSCONFIG_LSC_REFRESH {0x79, 0x00, 0x00, 0x00}
#define SYSCONFIG_LSC_INIT_ADDR {0x46, 0x00, 0x00, 0x00}
#define SYSCONFIG_LSC_BITSTREAM_BURST {0x7a, 0x00, 0x00, 0x00}
#define SYSCONFIG_STATUS_DONE BIT(8)
#define SYSCONFIG_STATUS_BUSY BIT(12)
#define SYSCONFIG_STATUS_FAIL BIT(13)
#define SYSCONFIG_STATUS_ERR GENMASK(25, 23)
#define SYSCONFIG_POLL_INTERVAL_US 30
#define SYSCONFIG_POLL_BUSY_TIMEOUT_US 1000000
#define SYSCONFIG_POLL_GPIO_TIMEOUT_US 100000
struct sysconfig_priv {
struct gpio_desc *program;
struct gpio_desc *init;
struct gpio_desc *done;
struct device *dev;
int (*command_transfer)(struct sysconfig_priv *priv, const void *tx_buf,
size_t tx_len, void *rx_buf, size_t rx_len);
int (*bitstream_burst_write_init)(struct sysconfig_priv *priv);
int (*bitstream_burst_write)(struct sysconfig_priv *priv,
const char *tx_buf, size_t tx_len);
int (*bitstream_burst_write_complete)(struct sysconfig_priv *priv);
};
int sysconfig_probe(struct sysconfig_priv *priv);
#endif /* __LATTICE_SYSCONFIG_H */