linux-zen-desktop/drivers/gpio/gpio-sodaville.c

246 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* GPIO interface for Intel Sodaville SoCs.
*
* Copyright (c) 2010, 2011 Intel Corporation
*
* Author: Hans J. Koch <hjk@linutronix.de>
*/
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_irq.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#define DRV_NAME "sdv_gpio"
#define SDV_NUM_PUB_GPIOS 12
#define PCI_DEVICE_ID_SDV_GPIO 0x2e67
#define GPIO_BAR 0
#define GPOUTR 0x00
#define GPOER 0x04
#define GPINR 0x08
#define GPSTR 0x0c
#define GPIT1R0 0x10
#define GPIO_INT 0x14
#define GPIT1R1 0x18
#define GPMUXCTL 0x1c
struct sdv_gpio_chip_data {
int irq_base;
void __iomem *gpio_pub_base;
struct irq_domain *id;
struct irq_chip_generic *gc;
struct gpio_chip chip;
};
static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct sdv_gpio_chip_data *sd = gc->private;
void __iomem *type_reg;
u32 reg;
if (d->hwirq < 8)
type_reg = sd->gpio_pub_base + GPIT1R0;
else
type_reg = sd->gpio_pub_base + GPIT1R1;
reg = readl(type_reg);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
reg &= ~BIT(4 * (d->hwirq % 8));
break;
case IRQ_TYPE_LEVEL_LOW:
reg |= BIT(4 * (d->hwirq % 8));
break;
default:
return -EINVAL;
}
writel(reg, type_reg);
return 0;
}
static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data)
{
struct sdv_gpio_chip_data *sd = data;
unsigned long irq_stat = readl(sd->gpio_pub_base + GPSTR);
int irq_bit;
irq_stat &= readl(sd->gpio_pub_base + GPIO_INT);
if (!irq_stat)
return IRQ_NONE;
for_each_set_bit(irq_bit, &irq_stat, 32)
generic_handle_domain_irq(sd->id, irq_bit);
return IRQ_HANDLED;
}
static int sdv_xlate(struct irq_domain *h, struct device_node *node,
const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq,
u32 *out_type)
{
u32 line, type;
if (node != irq_domain_get_of_node(h))
return -EINVAL;
if (intsize < 2)
return -EINVAL;
line = *intspec;
*out_hwirq = line;
intspec++;
type = *intspec;
switch (type) {
case IRQ_TYPE_LEVEL_LOW:
case IRQ_TYPE_LEVEL_HIGH:
*out_type = type;
break;
default:
return -EINVAL;
}
return 0;
}
static const struct irq_domain_ops irq_domain_sdv_ops = {
.xlate = sdv_xlate,
};
static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
struct pci_dev *pdev)
{
struct irq_chip_type *ct;
int ret;
sd->irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0,
SDV_NUM_PUB_GPIOS, -1);
if (sd->irq_base < 0)
return sd->irq_base;
/* mask + ACK all interrupt sources */
writel(0, sd->gpio_pub_base + GPIO_INT);
writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR);
ret = devm_request_irq(&pdev->dev, pdev->irq,
sdv_gpio_pub_irq_handler, IRQF_SHARED,
"sdv_gpio", sd);
if (ret)
return ret;
/*
* This gpio irq controller latches level irqs. Testing shows that if
* we unmask & ACK the IRQ before the source of the interrupt is gone
* then the interrupt is active again.
*/
sd->gc = devm_irq_alloc_generic_chip(&pdev->dev, "sdv-gpio", 1,
sd->irq_base,
sd->gpio_pub_base,
handle_fasteoi_irq);
if (!sd->gc)
return -ENOMEM;
sd->gc->private = sd;
ct = sd->gc->chip_types;
ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
ct->regs.eoi = GPSTR;
ct->regs.mask = GPIO_INT;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_eoi = irq_gc_eoi;
ct->chip.irq_set_type = sdv_gpio_pub_set_type;
irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS),
IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST,
IRQ_LEVEL | IRQ_NOPROBE);
sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS,
sd->irq_base, 0, &irq_domain_sdv_ops, sd);
if (!sd->id)
return -ENODEV;
return 0;
}
static int sdv_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
struct sdv_gpio_chip_data *sd;
int ret;
u32 mux_val;
sd = devm_kzalloc(&pdev->dev, sizeof(*sd), GFP_KERNEL);
if (!sd)
return -ENOMEM;
ret = pcim_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "can't enable device.\n");
return ret;
}
ret = pcim_iomap_regions(pdev, 1 << GPIO_BAR, DRV_NAME);
if (ret) {
dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
return ret;
}
sd->gpio_pub_base = pcim_iomap_table(pdev)[GPIO_BAR];
ret = of_property_read_u32(pdev->dev.of_node, "intel,muxctl", &mux_val);
if (!ret)
writel(mux_val, sd->gpio_pub_base + GPMUXCTL);
ret = bgpio_init(&sd->chip, &pdev->dev, 4,
sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
NULL, sd->gpio_pub_base + GPOER, NULL, 0);
if (ret)
return ret;
sd->chip.ngpio = SDV_NUM_PUB_GPIOS;
ret = devm_gpiochip_add_data(&pdev->dev, &sd->chip, sd);
if (ret < 0) {
dev_err(&pdev->dev, "gpiochip_add() failed.\n");
return ret;
}
ret = sdv_register_irqsupport(sd, pdev);
if (ret)
return ret;
pci_set_drvdata(pdev, sd);
dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n");
return 0;
}
static const struct pci_device_id sdv_gpio_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) },
{ 0, },
};
static struct pci_driver sdv_gpio_driver = {
.driver = {
.suppress_bind_attrs = true,
},
.name = DRV_NAME,
.id_table = sdv_gpio_pci_ids,
.probe = sdv_gpio_probe,
};
builtin_pci_driver(sdv_gpio_driver);