4540 lines
168 KiB
C
4540 lines
168 KiB
C
/****************************************************************************\
|
||
*
|
||
* File Name atomfirmware.h
|
||
* Project This is an interface header file between atombios and OS GPU drivers for SoC15 products
|
||
*
|
||
* Description header file of general definitions for OS and pre-OS video drivers
|
||
*
|
||
* Copyright 2014 Advanced Micro Devices, Inc.
|
||
*
|
||
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
|
||
* and associated documentation files (the "Software"), to deal in the Software without restriction,
|
||
* including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
|
||
* subject to the following conditions:
|
||
*
|
||
* The above copyright notice and this permission notice shall be included in all copies or substantial
|
||
* portions of the Software.
|
||
*
|
||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
||
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
||
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||
* OTHER DEALINGS IN THE SOFTWARE.
|
||
*
|
||
\****************************************************************************/
|
||
|
||
/*IMPORTANT NOTES
|
||
* If a change in VBIOS/Driver/Tool's interface is only needed for SoC15 and forward products, then the change is only needed in this atomfirmware.h header file.
|
||
* If a change in VBIOS/Driver/Tool's interface is only needed for pre-SoC15 products, then the change is only needed in atombios.h header file.
|
||
* If a change is needed for both pre and post SoC15 products, then the change has to be made separately and might be differently in both atomfirmware.h and atombios.h.
|
||
*/
|
||
|
||
#ifndef _ATOMFIRMWARE_H_
|
||
#define _ATOMFIRMWARE_H_
|
||
|
||
enum atom_bios_header_version_def{
|
||
ATOM_MAJOR_VERSION =0x0003,
|
||
ATOM_MINOR_VERSION =0x0003,
|
||
};
|
||
|
||
#ifdef _H2INC
|
||
#ifndef uint32_t
|
||
typedef unsigned long uint32_t;
|
||
#endif
|
||
|
||
#ifndef uint16_t
|
||
typedef unsigned short uint16_t;
|
||
#endif
|
||
|
||
#ifndef uint8_t
|
||
typedef unsigned char uint8_t;
|
||
#endif
|
||
#endif
|
||
|
||
enum atom_crtc_def{
|
||
ATOM_CRTC1 =0,
|
||
ATOM_CRTC2 =1,
|
||
ATOM_CRTC3 =2,
|
||
ATOM_CRTC4 =3,
|
||
ATOM_CRTC5 =4,
|
||
ATOM_CRTC6 =5,
|
||
ATOM_CRTC_INVALID =0xff,
|
||
};
|
||
|
||
enum atom_ppll_def{
|
||
ATOM_PPLL0 =2,
|
||
ATOM_GCK_DFS =8,
|
||
ATOM_FCH_CLK =9,
|
||
ATOM_DP_DTO =11,
|
||
ATOM_COMBOPHY_PLL0 =20,
|
||
ATOM_COMBOPHY_PLL1 =21,
|
||
ATOM_COMBOPHY_PLL2 =22,
|
||
ATOM_COMBOPHY_PLL3 =23,
|
||
ATOM_COMBOPHY_PLL4 =24,
|
||
ATOM_COMBOPHY_PLL5 =25,
|
||
ATOM_PPLL_INVALID =0xff,
|
||
};
|
||
|
||
// define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSel
|
||
enum atom_dig_def{
|
||
ASIC_INT_DIG1_ENCODER_ID =0x03,
|
||
ASIC_INT_DIG2_ENCODER_ID =0x09,
|
||
ASIC_INT_DIG3_ENCODER_ID =0x0a,
|
||
ASIC_INT_DIG4_ENCODER_ID =0x0b,
|
||
ASIC_INT_DIG5_ENCODER_ID =0x0c,
|
||
ASIC_INT_DIG6_ENCODER_ID =0x0d,
|
||
ASIC_INT_DIG7_ENCODER_ID =0x0e,
|
||
};
|
||
|
||
//ucEncoderMode
|
||
enum atom_encode_mode_def
|
||
{
|
||
ATOM_ENCODER_MODE_DP =0,
|
||
ATOM_ENCODER_MODE_DP_SST =0,
|
||
ATOM_ENCODER_MODE_LVDS =1,
|
||
ATOM_ENCODER_MODE_DVI =2,
|
||
ATOM_ENCODER_MODE_HDMI =3,
|
||
ATOM_ENCODER_MODE_DP_AUDIO =5,
|
||
ATOM_ENCODER_MODE_DP_MST =5,
|
||
ATOM_ENCODER_MODE_CRT =15,
|
||
ATOM_ENCODER_MODE_DVO =16,
|
||
};
|
||
|
||
enum atom_encoder_refclk_src_def{
|
||
ENCODER_REFCLK_SRC_P1PLL =0,
|
||
ENCODER_REFCLK_SRC_P2PLL =1,
|
||
ENCODER_REFCLK_SRC_P3PLL =2,
|
||
ENCODER_REFCLK_SRC_EXTCLK =3,
|
||
ENCODER_REFCLK_SRC_INVALID =0xff,
|
||
};
|
||
|
||
enum atom_scaler_def{
|
||
ATOM_SCALER_DISABLE =0, /*scaler bypass mode, auto-center & no replication*/
|
||
ATOM_SCALER_CENTER =1, //For Fudo, it's bypass and auto-center & auto replication
|
||
ATOM_SCALER_EXPANSION =2, /*scaler expansion by 2 tap alpha blending mode*/
|
||
};
|
||
|
||
enum atom_operation_def{
|
||
ATOM_DISABLE = 0,
|
||
ATOM_ENABLE = 1,
|
||
ATOM_INIT = 7,
|
||
ATOM_GET_STATUS = 8,
|
||
};
|
||
|
||
enum atom_embedded_display_op_def{
|
||
ATOM_LCD_BL_OFF = 2,
|
||
ATOM_LCD_BL_OM = 3,
|
||
ATOM_LCD_BL_BRIGHTNESS_CONTROL = 4,
|
||
ATOM_LCD_SELFTEST_START = 5,
|
||
ATOM_LCD_SELFTEST_STOP = 6,
|
||
};
|
||
|
||
enum atom_spread_spectrum_mode{
|
||
ATOM_SS_CENTER_OR_DOWN_MODE_MASK = 0x01,
|
||
ATOM_SS_DOWN_SPREAD_MODE = 0x00,
|
||
ATOM_SS_CENTRE_SPREAD_MODE = 0x01,
|
||
ATOM_INT_OR_EXT_SS_MASK = 0x02,
|
||
ATOM_INTERNAL_SS_MASK = 0x00,
|
||
ATOM_EXTERNAL_SS_MASK = 0x02,
|
||
};
|
||
|
||
/* define panel bit per color */
|
||
enum atom_panel_bit_per_color{
|
||
PANEL_BPC_UNDEFINE =0x00,
|
||
PANEL_6BIT_PER_COLOR =0x01,
|
||
PANEL_8BIT_PER_COLOR =0x02,
|
||
PANEL_10BIT_PER_COLOR =0x03,
|
||
PANEL_12BIT_PER_COLOR =0x04,
|
||
PANEL_16BIT_PER_COLOR =0x05,
|
||
};
|
||
|
||
//ucVoltageType
|
||
enum atom_voltage_type
|
||
{
|
||
VOLTAGE_TYPE_VDDC = 1,
|
||
VOLTAGE_TYPE_MVDDC = 2,
|
||
VOLTAGE_TYPE_MVDDQ = 3,
|
||
VOLTAGE_TYPE_VDDCI = 4,
|
||
VOLTAGE_TYPE_VDDGFX = 5,
|
||
VOLTAGE_TYPE_PCC = 6,
|
||
VOLTAGE_TYPE_MVPP = 7,
|
||
VOLTAGE_TYPE_LEDDPM = 8,
|
||
VOLTAGE_TYPE_PCC_MVDD = 9,
|
||
VOLTAGE_TYPE_PCIE_VDDC = 10,
|
||
VOLTAGE_TYPE_PCIE_VDDR = 11,
|
||
VOLTAGE_TYPE_GENERIC_I2C_1 = 0x11,
|
||
VOLTAGE_TYPE_GENERIC_I2C_2 = 0x12,
|
||
VOLTAGE_TYPE_GENERIC_I2C_3 = 0x13,
|
||
VOLTAGE_TYPE_GENERIC_I2C_4 = 0x14,
|
||
VOLTAGE_TYPE_GENERIC_I2C_5 = 0x15,
|
||
VOLTAGE_TYPE_GENERIC_I2C_6 = 0x16,
|
||
VOLTAGE_TYPE_GENERIC_I2C_7 = 0x17,
|
||
VOLTAGE_TYPE_GENERIC_I2C_8 = 0x18,
|
||
VOLTAGE_TYPE_GENERIC_I2C_9 = 0x19,
|
||
VOLTAGE_TYPE_GENERIC_I2C_10 = 0x1A,
|
||
};
|
||
|
||
enum atom_dgpu_vram_type {
|
||
ATOM_DGPU_VRAM_TYPE_GDDR5 = 0x50,
|
||
ATOM_DGPU_VRAM_TYPE_HBM2 = 0x60,
|
||
ATOM_DGPU_VRAM_TYPE_HBM2E = 0x61,
|
||
ATOM_DGPU_VRAM_TYPE_GDDR6 = 0x70,
|
||
ATOM_DGPU_VRAM_TYPE_HBM3 = 0x80,
|
||
};
|
||
|
||
enum atom_dp_vs_preemph_def{
|
||
DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00,
|
||
DP_VS_LEVEL1_PREEMPH_LEVEL0 = 0x01,
|
||
DP_VS_LEVEL2_PREEMPH_LEVEL0 = 0x02,
|
||
DP_VS_LEVEL3_PREEMPH_LEVEL0 = 0x03,
|
||
DP_VS_LEVEL0_PREEMPH_LEVEL1 = 0x08,
|
||
DP_VS_LEVEL1_PREEMPH_LEVEL1 = 0x09,
|
||
DP_VS_LEVEL2_PREEMPH_LEVEL1 = 0x0a,
|
||
DP_VS_LEVEL0_PREEMPH_LEVEL2 = 0x10,
|
||
DP_VS_LEVEL1_PREEMPH_LEVEL2 = 0x11,
|
||
DP_VS_LEVEL0_PREEMPH_LEVEL3 = 0x18,
|
||
};
|
||
|
||
#define BIOS_ATOM_PREFIX "ATOMBIOS"
|
||
#define BIOS_VERSION_PREFIX "ATOMBIOSBK-AMD"
|
||
#define BIOS_STRING_LENGTH 43
|
||
|
||
/*
|
||
enum atom_string_def{
|
||
asic_bus_type_pcie_string = "PCI_EXPRESS",
|
||
atom_fire_gl_string = "FGL",
|
||
atom_bios_string = "ATOM"
|
||
};
|
||
*/
|
||
|
||
#pragma pack(1) /* BIOS data must use byte aligment*/
|
||
|
||
enum atombios_image_offset{
|
||
OFFSET_TO_ATOM_ROM_HEADER_POINTER = 0x00000048,
|
||
OFFSET_TO_ATOM_ROM_IMAGE_SIZE = 0x00000002,
|
||
OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE = 0x94,
|
||
MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE = 20, /*including the terminator 0x0!*/
|
||
OFFSET_TO_GET_ATOMBIOS_NUMBER_OF_STRINGS = 0x2f,
|
||
OFFSET_TO_GET_ATOMBIOS_STRING_START = 0x6e,
|
||
OFFSET_TO_VBIOS_PART_NUMBER = 0x80,
|
||
OFFSET_TO_VBIOS_DATE = 0x50,
|
||
};
|
||
|
||
/****************************************************************************
|
||
* Common header for all tables (Data table, Command function).
|
||
* Every table pointed in _ATOM_MASTER_DATA_TABLE has this common header.
|
||
* And the pointer actually points to this header.
|
||
****************************************************************************/
|
||
|
||
struct atom_common_table_header
|
||
{
|
||
uint16_t structuresize;
|
||
uint8_t format_revision; //mainly used for a hw function, when the parser is not backward compatible
|
||
uint8_t content_revision; //change it when a data table has a structure change, or a hw function has a input/output parameter change
|
||
};
|
||
|
||
/****************************************************************************
|
||
* Structure stores the ROM header.
|
||
****************************************************************************/
|
||
struct atom_rom_header_v2_2
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t atom_bios_string[4]; //enum atom_string_def atom_bios_string; //Signature to distinguish between Atombios and non-atombios,
|
||
uint16_t bios_segment_address;
|
||
uint16_t protectedmodeoffset;
|
||
uint16_t configfilenameoffset;
|
||
uint16_t crc_block_offset;
|
||
uint16_t vbios_bootupmessageoffset;
|
||
uint16_t int10_offset;
|
||
uint16_t pcibusdevinitcode;
|
||
uint16_t iobaseaddress;
|
||
uint16_t subsystem_vendor_id;
|
||
uint16_t subsystem_id;
|
||
uint16_t pci_info_offset;
|
||
uint16_t masterhwfunction_offset; //Offest for SW to get all command function offsets, Don't change the position
|
||
uint16_t masterdatatable_offset; //Offest for SW to get all data table offsets, Don't change the position
|
||
uint16_t reserved;
|
||
uint32_t pspdirtableoffset;
|
||
};
|
||
|
||
/*==============================hw function portion======================================================================*/
|
||
|
||
|
||
/****************************************************************************
|
||
* Structures used in Command.mtb, each function name is not given here since those function could change from time to time
|
||
* The real functionality of each function is associated with the parameter structure version when defined
|
||
* For all internal cmd function definitions, please reference to atomstruct.h
|
||
****************************************************************************/
|
||
struct atom_master_list_of_command_functions_v2_1{
|
||
uint16_t asic_init; //Function
|
||
uint16_t cmd_function1; //used as an internal one
|
||
uint16_t cmd_function2; //used as an internal one
|
||
uint16_t cmd_function3; //used as an internal one
|
||
uint16_t digxencodercontrol; //Function
|
||
uint16_t cmd_function5; //used as an internal one
|
||
uint16_t cmd_function6; //used as an internal one
|
||
uint16_t cmd_function7; //used as an internal one
|
||
uint16_t cmd_function8; //used as an internal one
|
||
uint16_t cmd_function9; //used as an internal one
|
||
uint16_t setengineclock; //Function
|
||
uint16_t setmemoryclock; //Function
|
||
uint16_t setpixelclock; //Function
|
||
uint16_t enabledisppowergating; //Function
|
||
uint16_t cmd_function14; //used as an internal one
|
||
uint16_t cmd_function15; //used as an internal one
|
||
uint16_t cmd_function16; //used as an internal one
|
||
uint16_t cmd_function17; //used as an internal one
|
||
uint16_t cmd_function18; //used as an internal one
|
||
uint16_t cmd_function19; //used as an internal one
|
||
uint16_t cmd_function20; //used as an internal one
|
||
uint16_t cmd_function21; //used as an internal one
|
||
uint16_t cmd_function22; //used as an internal one
|
||
uint16_t cmd_function23; //used as an internal one
|
||
uint16_t cmd_function24; //used as an internal one
|
||
uint16_t cmd_function25; //used as an internal one
|
||
uint16_t cmd_function26; //used as an internal one
|
||
uint16_t cmd_function27; //used as an internal one
|
||
uint16_t cmd_function28; //used as an internal one
|
||
uint16_t cmd_function29; //used as an internal one
|
||
uint16_t cmd_function30; //used as an internal one
|
||
uint16_t cmd_function31; //used as an internal one
|
||
uint16_t cmd_function32; //used as an internal one
|
||
uint16_t cmd_function33; //used as an internal one
|
||
uint16_t blankcrtc; //Function
|
||
uint16_t enablecrtc; //Function
|
||
uint16_t cmd_function36; //used as an internal one
|
||
uint16_t cmd_function37; //used as an internal one
|
||
uint16_t cmd_function38; //used as an internal one
|
||
uint16_t cmd_function39; //used as an internal one
|
||
uint16_t cmd_function40; //used as an internal one
|
||
uint16_t getsmuclockinfo; //Function
|
||
uint16_t selectcrtc_source; //Function
|
||
uint16_t cmd_function43; //used as an internal one
|
||
uint16_t cmd_function44; //used as an internal one
|
||
uint16_t cmd_function45; //used as an internal one
|
||
uint16_t setdceclock; //Function
|
||
uint16_t getmemoryclock; //Function
|
||
uint16_t getengineclock; //Function
|
||
uint16_t setcrtc_usingdtdtiming; //Function
|
||
uint16_t externalencodercontrol; //Function
|
||
uint16_t cmd_function51; //used as an internal one
|
||
uint16_t cmd_function52; //used as an internal one
|
||
uint16_t cmd_function53; //used as an internal one
|
||
uint16_t processi2cchanneltransaction;//Function
|
||
uint16_t cmd_function55; //used as an internal one
|
||
uint16_t cmd_function56; //used as an internal one
|
||
uint16_t cmd_function57; //used as an internal one
|
||
uint16_t cmd_function58; //used as an internal one
|
||
uint16_t cmd_function59; //used as an internal one
|
||
uint16_t computegpuclockparam; //Function
|
||
uint16_t cmd_function61; //used as an internal one
|
||
uint16_t cmd_function62; //used as an internal one
|
||
uint16_t dynamicmemorysettings; //Function function
|
||
uint16_t memorytraining; //Function function
|
||
uint16_t cmd_function65; //used as an internal one
|
||
uint16_t cmd_function66; //used as an internal one
|
||
uint16_t setvoltage; //Function
|
||
uint16_t cmd_function68; //used as an internal one
|
||
uint16_t readefusevalue; //Function
|
||
uint16_t cmd_function70; //used as an internal one
|
||
uint16_t cmd_function71; //used as an internal one
|
||
uint16_t cmd_function72; //used as an internal one
|
||
uint16_t cmd_function73; //used as an internal one
|
||
uint16_t cmd_function74; //used as an internal one
|
||
uint16_t cmd_function75; //used as an internal one
|
||
uint16_t dig1transmittercontrol; //Function
|
||
uint16_t cmd_function77; //used as an internal one
|
||
uint16_t processauxchanneltransaction;//Function
|
||
uint16_t cmd_function79; //used as an internal one
|
||
uint16_t getvoltageinfo; //Function
|
||
};
|
||
|
||
struct atom_master_command_function_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
struct atom_master_list_of_command_functions_v2_1 listofcmdfunctions;
|
||
};
|
||
|
||
/****************************************************************************
|
||
* Structures used in every command function
|
||
****************************************************************************/
|
||
struct atom_function_attribute
|
||
{
|
||
uint16_t ws_in_bytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
|
||
uint16_t ps_in_bytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
|
||
uint16_t updated_by_util:1; //[15]=flag to indicate the function is updated by util
|
||
};
|
||
|
||
|
||
/****************************************************************************
|
||
* Common header for all hw functions.
|
||
* Every function pointed by _master_list_of_hw_function has this common header.
|
||
* And the pointer actually points to this header.
|
||
****************************************************************************/
|
||
struct atom_rom_hw_function_header
|
||
{
|
||
struct atom_common_table_header func_header;
|
||
struct atom_function_attribute func_attrib;
|
||
};
|
||
|
||
|
||
/*==============================sw data table portion======================================================================*/
|
||
/****************************************************************************
|
||
* Structures used in data.mtb, each data table name is not given here since those data table could change from time to time
|
||
* The real name of each table is given when its data structure version is defined
|
||
****************************************************************************/
|
||
struct atom_master_list_of_data_tables_v2_1{
|
||
uint16_t utilitypipeline; /* Offest for the utility to get parser info,Don't change this position!*/
|
||
uint16_t multimedia_info;
|
||
uint16_t smc_dpm_info;
|
||
uint16_t sw_datatable3;
|
||
uint16_t firmwareinfo; /* Shared by various SW components */
|
||
uint16_t sw_datatable5;
|
||
uint16_t lcd_info; /* Shared by various SW components */
|
||
uint16_t sw_datatable7;
|
||
uint16_t smu_info;
|
||
uint16_t sw_datatable9;
|
||
uint16_t sw_datatable10;
|
||
uint16_t vram_usagebyfirmware; /* Shared by various SW components */
|
||
uint16_t gpio_pin_lut; /* Shared by various SW components */
|
||
uint16_t sw_datatable13;
|
||
uint16_t gfx_info;
|
||
uint16_t powerplayinfo; /* Shared by various SW components */
|
||
uint16_t sw_datatable16;
|
||
uint16_t sw_datatable17;
|
||
uint16_t sw_datatable18;
|
||
uint16_t sw_datatable19;
|
||
uint16_t sw_datatable20;
|
||
uint16_t sw_datatable21;
|
||
uint16_t displayobjectinfo; /* Shared by various SW components */
|
||
uint16_t indirectioaccess; /* used as an internal one */
|
||
uint16_t umc_info; /* Shared by various SW components */
|
||
uint16_t sw_datatable25;
|
||
uint16_t sw_datatable26;
|
||
uint16_t dce_info; /* Shared by various SW components */
|
||
uint16_t vram_info; /* Shared by various SW components */
|
||
uint16_t sw_datatable29;
|
||
uint16_t integratedsysteminfo; /* Shared by various SW components */
|
||
uint16_t asic_profiling_info; /* Shared by various SW components */
|
||
uint16_t voltageobject_info; /* shared by various SW components */
|
||
uint16_t sw_datatable33;
|
||
uint16_t sw_datatable34;
|
||
};
|
||
|
||
|
||
struct atom_master_data_table_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
struct atom_master_list_of_data_tables_v2_1 listOfdatatables;
|
||
};
|
||
|
||
|
||
struct atom_dtd_format
|
||
{
|
||
uint16_t pixclk;
|
||
uint16_t h_active;
|
||
uint16_t h_blanking_time;
|
||
uint16_t v_active;
|
||
uint16_t v_blanking_time;
|
||
uint16_t h_sync_offset;
|
||
uint16_t h_sync_width;
|
||
uint16_t v_sync_offset;
|
||
uint16_t v_syncwidth;
|
||
uint16_t reserved;
|
||
uint16_t reserved0;
|
||
uint8_t h_border;
|
||
uint8_t v_border;
|
||
uint16_t miscinfo;
|
||
uint8_t atom_mode_id;
|
||
uint8_t refreshrate;
|
||
};
|
||
|
||
/* atom_dtd_format.modemiscinfo defintion */
|
||
enum atom_dtd_format_modemiscinfo{
|
||
ATOM_HSYNC_POLARITY = 0x0002,
|
||
ATOM_VSYNC_POLARITY = 0x0004,
|
||
ATOM_H_REPLICATIONBY2 = 0x0010,
|
||
ATOM_V_REPLICATIONBY2 = 0x0020,
|
||
ATOM_INTERLACE = 0x0080,
|
||
ATOM_COMPOSITESYNC = 0x0040,
|
||
};
|
||
|
||
|
||
/* utilitypipeline
|
||
* when format_revision==1 && content_revision==1, then this an info table for atomworks to use during debug session, no structure is associated with it.
|
||
* the location of it can't change
|
||
*/
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table firmwareinfo structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct atom_firmware_info_v3_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t firmware_revision;
|
||
uint32_t bootup_sclk_in10khz;
|
||
uint32_t bootup_mclk_in10khz;
|
||
uint32_t firmware_capability; // enum atombios_firmware_capability
|
||
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
|
||
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
|
||
uint16_t bootup_vddc_mv;
|
||
uint16_t bootup_vddci_mv;
|
||
uint16_t bootup_mvddc_mv;
|
||
uint16_t bootup_vddgfx_mv;
|
||
uint8_t mem_module_id;
|
||
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
|
||
uint8_t reserved1[2];
|
||
uint32_t mc_baseaddr_high;
|
||
uint32_t mc_baseaddr_low;
|
||
uint32_t reserved2[6];
|
||
};
|
||
|
||
/* Total 32bit cap indication */
|
||
enum atombios_firmware_capability
|
||
{
|
||
ATOM_FIRMWARE_CAP_FIRMWARE_POSTED = 0x00000001,
|
||
ATOM_FIRMWARE_CAP_GPU_VIRTUALIZATION = 0x00000002,
|
||
ATOM_FIRMWARE_CAP_WMI_SUPPORT = 0x00000040,
|
||
ATOM_FIRMWARE_CAP_HWEMU_ENABLE = 0x00000080,
|
||
ATOM_FIRMWARE_CAP_HWEMU_UMC_CFG = 0x00000100,
|
||
ATOM_FIRMWARE_CAP_SRAM_ECC = 0x00000200,
|
||
ATOM_FIRMWARE_CAP_ENABLE_2STAGE_BIST_TRAINING = 0x00000400,
|
||
ATOM_FIRMWARE_CAP_ENABLE_2ND_USB20PORT = 0x0008000,
|
||
ATOM_FIRMWARE_CAP_DYNAMIC_BOOT_CFG_ENABLE = 0x0020000,
|
||
};
|
||
|
||
enum atom_cooling_solution_id{
|
||
AIR_COOLING = 0x00,
|
||
LIQUID_COOLING = 0x01
|
||
};
|
||
|
||
struct atom_firmware_info_v3_2 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t firmware_revision;
|
||
uint32_t bootup_sclk_in10khz;
|
||
uint32_t bootup_mclk_in10khz;
|
||
uint32_t firmware_capability; // enum atombios_firmware_capability
|
||
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
|
||
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
|
||
uint16_t bootup_vddc_mv;
|
||
uint16_t bootup_vddci_mv;
|
||
uint16_t bootup_mvddc_mv;
|
||
uint16_t bootup_vddgfx_mv;
|
||
uint8_t mem_module_id;
|
||
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
|
||
uint8_t reserved1[2];
|
||
uint32_t mc_baseaddr_high;
|
||
uint32_t mc_baseaddr_low;
|
||
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
|
||
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
|
||
uint8_t board_i2c_feature_slave_addr;
|
||
uint8_t reserved3;
|
||
uint16_t bootup_mvddq_mv;
|
||
uint16_t bootup_mvpp_mv;
|
||
uint32_t zfbstartaddrin16mb;
|
||
uint32_t reserved2[3];
|
||
};
|
||
|
||
struct atom_firmware_info_v3_3
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t firmware_revision;
|
||
uint32_t bootup_sclk_in10khz;
|
||
uint32_t bootup_mclk_in10khz;
|
||
uint32_t firmware_capability; // enum atombios_firmware_capability
|
||
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
|
||
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
|
||
uint16_t bootup_vddc_mv;
|
||
uint16_t bootup_vddci_mv;
|
||
uint16_t bootup_mvddc_mv;
|
||
uint16_t bootup_vddgfx_mv;
|
||
uint8_t mem_module_id;
|
||
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
|
||
uint8_t reserved1[2];
|
||
uint32_t mc_baseaddr_high;
|
||
uint32_t mc_baseaddr_low;
|
||
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
|
||
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
|
||
uint8_t board_i2c_feature_slave_addr;
|
||
uint8_t reserved3;
|
||
uint16_t bootup_mvddq_mv;
|
||
uint16_t bootup_mvpp_mv;
|
||
uint32_t zfbstartaddrin16mb;
|
||
uint32_t pplib_pptable_id; // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
|
||
uint32_t reserved2[2];
|
||
};
|
||
|
||
struct atom_firmware_info_v3_4 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t firmware_revision;
|
||
uint32_t bootup_sclk_in10khz;
|
||
uint32_t bootup_mclk_in10khz;
|
||
uint32_t firmware_capability; // enum atombios_firmware_capability
|
||
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
|
||
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
|
||
uint16_t bootup_vddc_mv;
|
||
uint16_t bootup_vddci_mv;
|
||
uint16_t bootup_mvddc_mv;
|
||
uint16_t bootup_vddgfx_mv;
|
||
uint8_t mem_module_id;
|
||
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
|
||
uint8_t reserved1[2];
|
||
uint32_t mc_baseaddr_high;
|
||
uint32_t mc_baseaddr_low;
|
||
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
|
||
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
|
||
uint8_t board_i2c_feature_slave_addr;
|
||
uint8_t ras_rom_i2c_slave_addr;
|
||
uint16_t bootup_mvddq_mv;
|
||
uint16_t bootup_mvpp_mv;
|
||
uint32_t zfbstartaddrin16mb;
|
||
uint32_t pplib_pptable_id; // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
|
||
uint32_t mvdd_ratio; // mvdd_raio = (real mvdd in power rail)*1000/(mvdd_output_from_svi2)
|
||
uint16_t hw_bootup_vddgfx_mv; // hw default vddgfx voltage level decide by board strap
|
||
uint16_t hw_bootup_vddc_mv; // hw default vddc voltage level decide by board strap
|
||
uint16_t hw_bootup_mvddc_mv; // hw default mvddc voltage level decide by board strap
|
||
uint16_t hw_bootup_vddci_mv; // hw default vddci voltage level decide by board strap
|
||
uint32_t maco_pwrlimit_mw; // bomaco mode power limit in unit of m-watt
|
||
uint32_t usb_pwrlimit_mw; // power limit when USB is enable in unit of m-watt
|
||
uint32_t fw_reserved_size_in_kb; // VBIOS reserved extra fw size in unit of kb.
|
||
uint32_t pspbl_init_done_reg_addr;
|
||
uint32_t pspbl_init_done_value;
|
||
uint32_t pspbl_init_done_check_timeout; // time out in unit of us when polling pspbl init done
|
||
uint32_t reserved[2];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table lcd_info structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct lcd_info_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
struct atom_dtd_format lcd_timing;
|
||
uint16_t backlight_pwm;
|
||
uint16_t special_handle_cap;
|
||
uint16_t panel_misc;
|
||
uint16_t lvds_max_slink_pclk;
|
||
uint16_t lvds_ss_percentage;
|
||
uint16_t lvds_ss_rate_10hz;
|
||
uint8_t pwr_on_digon_to_de; /*all pwr sequence numbers below are in uint of 4ms*/
|
||
uint8_t pwr_on_de_to_vary_bl;
|
||
uint8_t pwr_down_vary_bloff_to_de;
|
||
uint8_t pwr_down_de_to_digoff;
|
||
uint8_t pwr_off_delay;
|
||
uint8_t pwr_on_vary_bl_to_blon;
|
||
uint8_t pwr_down_bloff_to_vary_bloff;
|
||
uint8_t panel_bpc;
|
||
uint8_t dpcd_edp_config_cap;
|
||
uint8_t dpcd_max_link_rate;
|
||
uint8_t dpcd_max_lane_count;
|
||
uint8_t dpcd_max_downspread;
|
||
uint8_t min_allowed_bl_level;
|
||
uint8_t max_allowed_bl_level;
|
||
uint8_t bootup_bl_level;
|
||
uint8_t dplvdsrxid;
|
||
uint32_t reserved1[8];
|
||
};
|
||
|
||
/* lcd_info_v2_1.panel_misc defintion */
|
||
enum atom_lcd_info_panel_misc{
|
||
ATOM_PANEL_MISC_FPDI =0x0002,
|
||
};
|
||
|
||
//uceDPToLVDSRxId
|
||
enum atom_lcd_info_dptolvds_rx_id
|
||
{
|
||
eDP_TO_LVDS_RX_DISABLE = 0x00, // no eDP->LVDS translator chip
|
||
eDP_TO_LVDS_COMMON_ID = 0x01, // common eDP->LVDS translator chip without AMD SW init
|
||
eDP_TO_LVDS_REALTEK_ID = 0x02, // Realtek tansaltor which require AMD SW init
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table gpio_pin_lut structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct atom_gpio_pin_assignment
|
||
{
|
||
uint32_t data_a_reg_index;
|
||
uint8_t gpio_bitshift;
|
||
uint8_t gpio_mask_bitshift;
|
||
uint8_t gpio_id;
|
||
uint8_t reserved;
|
||
};
|
||
|
||
/* atom_gpio_pin_assignment.gpio_id definition */
|
||
enum atom_gpio_pin_assignment_gpio_id {
|
||
I2C_HW_LANE_MUX =0x0f, /* only valid when bit7=1 */
|
||
I2C_HW_ENGINE_ID_MASK =0x70, /* only valid when bit7=1 */
|
||
I2C_HW_CAP =0x80, /*only when the I2C_HW_CAP is set, the pin ID is assigned to an I2C pin pair, otherwise, it's an generic GPIO pin */
|
||
|
||
/* gpio_id pre-define id for multiple usage */
|
||
/* GPIO use to control PCIE_VDDC in certain SLT board */
|
||
PCIE_VDDC_CONTROL_GPIO_PINID = 56,
|
||
/* if PP_AC_DC_SWITCH_GPIO_PINID in Gpio_Pin_LutTable, AC/DC swithing feature is enable */
|
||
PP_AC_DC_SWITCH_GPIO_PINID = 60,
|
||
/* VDDC_REGULATOR_VRHOT_GPIO_PINID in Gpio_Pin_LutTable, VRHot feature is enable */
|
||
VDDC_VRHOT_GPIO_PINID = 61,
|
||
/*if VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled */
|
||
VDDC_PCC_GPIO_PINID = 62,
|
||
/* Only used on certain SLT/PA board to allow utility to cut Efuse. */
|
||
EFUSE_CUT_ENABLE_GPIO_PINID = 63,
|
||
/* ucGPIO=DRAM_SELF_REFRESH_GPIO_PIND uses for memory self refresh (ucGPIO=0, DRAM self-refresh; ucGPIO= */
|
||
DRAM_SELF_REFRESH_GPIO_PINID = 64,
|
||
/* Thermal interrupt output->system thermal chip GPIO pin */
|
||
THERMAL_INT_OUTPUT_GPIO_PINID =65,
|
||
};
|
||
|
||
|
||
struct atom_gpio_pin_lut_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
/*the real number of this included in the structure is calcualted by using the (whole structure size - the header size)/size of atom_gpio_pin_lut */
|
||
struct atom_gpio_pin_assignment gpio_pin[8];
|
||
};
|
||
|
||
|
||
/*
|
||
* VBIOS/PRE-OS always reserve a FB region at the top of frame buffer. driver should not write
|
||
* access that region. driver can allocate their own reservation region as long as it does not
|
||
* overlap firwmare's reservation region.
|
||
* if (pre-NV1X) atom data table firmwareInfoTable version < 3.3:
|
||
* in this case, atom data table vram_usagebyfirmwareTable version always <= 2.1
|
||
* if VBIOS/UEFI GOP is posted:
|
||
* VBIOS/UEFIGOP update used_by_firmware_in_kb = total reserved size by VBIOS
|
||
* update start_address_in_kb = total_mem_size_in_kb - used_by_firmware_in_kb;
|
||
* ( total_mem_size_in_kb = reg(CONFIG_MEMSIZE)<<10)
|
||
* driver can allocate driver reservation region under firmware reservation,
|
||
* used_by_driver_in_kb = driver reservation size
|
||
* driver reservation start address = (start_address_in_kb - used_by_driver_in_kb)
|
||
* Comment1[hchan]: There is only one reservation at the beginning of the FB reserved by
|
||
* host driver. Host driver would overwrite the table with the following
|
||
* used_by_firmware_in_kb = total reserved size for pf-vf info exchange and
|
||
* set SRIOV_MSG_SHARE_RESERVATION mask start_address_in_kb = 0
|
||
* else there is no VBIOS reservation region:
|
||
* driver must allocate driver reservation region at top of FB.
|
||
* driver set used_by_driver_in_kb = driver reservation size
|
||
* driver reservation start address = (total_mem_size_in_kb - used_by_driver_in_kb)
|
||
* same as Comment1
|
||
* else (NV1X and after):
|
||
* if VBIOS/UEFI GOP is posted:
|
||
* VBIOS/UEFIGOP update:
|
||
* used_by_firmware_in_kb = atom_firmware_Info_v3_3.fw_reserved_size_in_kb;
|
||
* start_address_in_kb = total_mem_size_in_kb - used_by_firmware_in_kb;
|
||
* (total_mem_size_in_kb = reg(CONFIG_MEMSIZE)<<10)
|
||
* if vram_usagebyfirmwareTable version <= 2.1:
|
||
* driver can allocate driver reservation region under firmware reservation,
|
||
* driver set used_by_driver_in_kb = driver reservation size
|
||
* driver reservation start address = start_address_in_kb - used_by_driver_in_kb
|
||
* same as Comment1
|
||
* else driver can:
|
||
* allocate it reservation any place as long as it does overlap pre-OS FW reservation area
|
||
* set used_by_driver_region0_in_kb = driver reservation size
|
||
* set driver_region0_start_address_in_kb = driver reservation region start address
|
||
* Comment2[hchan]: Host driver can set used_by_firmware_in_kb and start_address_in_kb to
|
||
* zero as the reservation for VF as it doesn’t exist. And Host driver should also
|
||
* update atom_firmware_Info table to remove the same VBIOS reservation as well.
|
||
*/
|
||
|
||
struct vram_usagebyfirmware_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t start_address_in_kb;
|
||
uint16_t used_by_firmware_in_kb;
|
||
uint16_t used_by_driver_in_kb;
|
||
};
|
||
|
||
struct vram_usagebyfirmware_v2_2 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t fw_region_start_address_in_kb;
|
||
uint16_t used_by_firmware_in_kb;
|
||
uint16_t reserved;
|
||
uint32_t driver_region0_start_address_in_kb;
|
||
uint32_t used_by_driver_region0_in_kb;
|
||
uint32_t reserved32[7];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table displayobjectinfo structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
enum atom_object_record_type_id {
|
||
ATOM_I2C_RECORD_TYPE = 1,
|
||
ATOM_HPD_INT_RECORD_TYPE = 2,
|
||
ATOM_CONNECTOR_CAP_RECORD_TYPE = 3,
|
||
ATOM_CONNECTOR_SPEED_UPTO = 4,
|
||
ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE = 9,
|
||
ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE = 16,
|
||
ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE = 17,
|
||
ATOM_ENCODER_CAP_RECORD_TYPE = 20,
|
||
ATOM_BRACKET_LAYOUT_RECORD_TYPE = 21,
|
||
ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD_TYPE = 22,
|
||
ATOM_DISP_CONNECTOR_CAPS_RECORD_TYPE = 23,
|
||
ATOM_BRACKET_LAYOUT_V2_RECORD_TYPE = 25,
|
||
ATOM_RECORD_END_TYPE = 0xFF,
|
||
};
|
||
|
||
struct atom_common_record_header
|
||
{
|
||
uint8_t record_type; //An emun to indicate the record type
|
||
uint8_t record_size; //The size of the whole record in byte
|
||
};
|
||
|
||
struct atom_i2c_record
|
||
{
|
||
struct atom_common_record_header record_header; //record_type = ATOM_I2C_RECORD_TYPE
|
||
uint8_t i2c_id;
|
||
uint8_t i2c_slave_addr; //The slave address, it's 0 when the record is attached to connector for DDC
|
||
};
|
||
|
||
struct atom_hpd_int_record
|
||
{
|
||
struct atom_common_record_header record_header; //record_type = ATOM_HPD_INT_RECORD_TYPE
|
||
uint8_t pin_id; //Corresponding block in GPIO_PIN_INFO table gives the pin info
|
||
uint8_t plugin_pin_state;
|
||
};
|
||
|
||
struct atom_connector_caps_record {
|
||
struct atom_common_record_header
|
||
record_header; //record_type = ATOM_CONN_CAP_RECORD_TYPE
|
||
uint16_t connector_caps; //01b if internal display is checked; 10b if internal BL is checked; 0 of Not
|
||
};
|
||
|
||
struct atom_connector_speed_record {
|
||
struct atom_common_record_header
|
||
record_header; //record_type = ATOM_CONN_SPEED_UPTO
|
||
uint32_t connector_max_speed; // connector Max speed attribute, it sets 8100 in Mhz when DP connector @8.1Ghz.
|
||
uint16_t reserved;
|
||
};
|
||
|
||
// Bit maps for ATOM_ENCODER_CAP_RECORD.usEncoderCap
|
||
enum atom_encoder_caps_def
|
||
{
|
||
ATOM_ENCODER_CAP_RECORD_HBR2 =0x01, // DP1.2 HBR2 is supported by HW encoder, it is retired in NI. the real meaning from SI is MST_EN
|
||
ATOM_ENCODER_CAP_RECORD_MST_EN =0x01, // from SI, this bit means DP MST is enable or not.
|
||
ATOM_ENCODER_CAP_RECORD_HBR2_EN =0x02, // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
|
||
ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN =0x04, // HDMI2.0 6Gbps enable or not.
|
||
ATOM_ENCODER_CAP_RECORD_HBR3_EN =0x08, // DP1.3 HBR3 is supported by board.
|
||
ATOM_ENCODER_CAP_RECORD_DP2 =0x10, // DP2 is supported by ASIC/board.
|
||
ATOM_ENCODER_CAP_RECORD_UHBR10_EN =0x20, // DP2.0 UHBR10 settings is supported by board
|
||
ATOM_ENCODER_CAP_RECORD_UHBR13_5_EN =0x40, // DP2.0 UHBR13.5 settings is supported by board
|
||
ATOM_ENCODER_CAP_RECORD_UHBR20_EN =0x80, // DP2.0 UHBR20 settings is supported by board
|
||
ATOM_ENCODER_CAP_RECORD_USB_C_TYPE =0x100, // the DP connector is a USB-C type.
|
||
};
|
||
|
||
struct atom_encoder_caps_record
|
||
{
|
||
struct atom_common_record_header record_header; //record_type = ATOM_ENCODER_CAP_RECORD_TYPE
|
||
uint32_t encodercaps;
|
||
};
|
||
|
||
enum atom_connector_caps_def
|
||
{
|
||
ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY = 0x01, //a cap bit to indicate that this non-embedded display connector is an internal display
|
||
ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY_BL = 0x02, //a cap bit to indicate that this internal display requires BL control from GPU, refers to lcd_info for BL PWM freq
|
||
};
|
||
|
||
struct atom_disp_connector_caps_record
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
uint32_t connectcaps;
|
||
};
|
||
|
||
//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
|
||
struct atom_gpio_pin_control_pair
|
||
{
|
||
uint8_t gpio_id; // GPIO_ID, find the corresponding ID in GPIO_LUT table
|
||
uint8_t gpio_pinstate; // Pin state showing how to set-up the pin
|
||
};
|
||
|
||
struct atom_object_gpio_cntl_record
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
uint8_t flag; // Future expnadibility
|
||
uint8_t number_of_pins; // Number of GPIO pins used to control the object
|
||
struct atom_gpio_pin_control_pair gpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins
|
||
};
|
||
|
||
//Definitions for GPIO pin state
|
||
enum atom_gpio_pin_control_pinstate_def
|
||
{
|
||
GPIO_PIN_TYPE_INPUT = 0x00,
|
||
GPIO_PIN_TYPE_OUTPUT = 0x10,
|
||
GPIO_PIN_TYPE_HW_CONTROL = 0x20,
|
||
|
||
//For GPIO_PIN_TYPE_OUTPUT the following is defined
|
||
GPIO_PIN_OUTPUT_STATE_MASK = 0x01,
|
||
GPIO_PIN_OUTPUT_STATE_SHIFT = 0,
|
||
GPIO_PIN_STATE_ACTIVE_LOW = 0x0,
|
||
GPIO_PIN_STATE_ACTIVE_HIGH = 0x1,
|
||
};
|
||
|
||
// Indexes to GPIO array in GLSync record
|
||
// GLSync record is for Frame Lock/Gen Lock feature.
|
||
enum atom_glsync_record_gpio_index_def
|
||
{
|
||
ATOM_GPIO_INDEX_GLSYNC_REFCLK = 0,
|
||
ATOM_GPIO_INDEX_GLSYNC_HSYNC = 1,
|
||
ATOM_GPIO_INDEX_GLSYNC_VSYNC = 2,
|
||
ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ = 3,
|
||
ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT = 4,
|
||
ATOM_GPIO_INDEX_GLSYNC_INTERRUPT = 5,
|
||
ATOM_GPIO_INDEX_GLSYNC_V_RESET = 6,
|
||
ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL = 7,
|
||
ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL = 8,
|
||
ATOM_GPIO_INDEX_GLSYNC_MAX = 9,
|
||
};
|
||
|
||
|
||
struct atom_connector_hpdpin_lut_record //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
uint8_t hpd_pin_map[8];
|
||
};
|
||
|
||
struct atom_connector_auxddc_lut_record //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
uint8_t aux_ddc_map[8];
|
||
};
|
||
|
||
struct atom_connector_forced_tmds_cap_record
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
// override TMDS capability on this connector when it operate in TMDS mode. usMaxTmdsClkRate = max TMDS Clock in Mhz/2.5
|
||
uint8_t maxtmdsclkrate_in2_5mhz;
|
||
uint8_t reserved;
|
||
};
|
||
|
||
struct atom_connector_layout_info
|
||
{
|
||
uint16_t connectorobjid;
|
||
uint8_t connector_type;
|
||
uint8_t position;
|
||
};
|
||
|
||
// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
|
||
enum atom_connector_layout_info_connector_type_def
|
||
{
|
||
CONNECTOR_TYPE_DVI_D = 1,
|
||
|
||
CONNECTOR_TYPE_HDMI = 4,
|
||
CONNECTOR_TYPE_DISPLAY_PORT = 5,
|
||
CONNECTOR_TYPE_MINI_DISPLAY_PORT = 6,
|
||
};
|
||
|
||
struct atom_bracket_layout_record
|
||
{
|
||
struct atom_common_record_header record_header;
|
||
uint8_t bracketlen;
|
||
uint8_t bracketwidth;
|
||
uint8_t conn_num;
|
||
uint8_t reserved;
|
||
struct atom_connector_layout_info conn_info[1];
|
||
};
|
||
struct atom_bracket_layout_record_v2 {
|
||
struct atom_common_record_header
|
||
record_header; //record_type = ATOM_BRACKET_LAYOUT_RECORD_TYPE
|
||
uint8_t bracketlen; //Bracket Length in mm
|
||
uint8_t bracketwidth; //Bracket Width in mm
|
||
uint8_t conn_num; //Connector numbering
|
||
uint8_t mini_type; //Mini Type (0 = Normal; 1 = Mini)
|
||
uint8_t reserved1;
|
||
uint8_t reserved2;
|
||
};
|
||
|
||
enum atom_connector_layout_info_mini_type_def {
|
||
MINI_TYPE_NORMAL = 0,
|
||
MINI_TYPE_MINI = 1,
|
||
};
|
||
|
||
enum atom_display_device_tag_def{
|
||
ATOM_DISPLAY_LCD1_SUPPORT = 0x0002, //an embedded display is either an LVDS or eDP signal type of display
|
||
ATOM_DISPLAY_LCD2_SUPPORT = 0x0020, //second edp device tag 0x0020 for backward compability
|
||
ATOM_DISPLAY_DFP1_SUPPORT = 0x0008,
|
||
ATOM_DISPLAY_DFP2_SUPPORT = 0x0080,
|
||
ATOM_DISPLAY_DFP3_SUPPORT = 0x0200,
|
||
ATOM_DISPLAY_DFP4_SUPPORT = 0x0400,
|
||
ATOM_DISPLAY_DFP5_SUPPORT = 0x0800,
|
||
ATOM_DISPLAY_DFP6_SUPPORT = 0x0040,
|
||
ATOM_DISPLAY_DFPx_SUPPORT = 0x0ec8,
|
||
};
|
||
|
||
struct atom_display_object_path_v2
|
||
{
|
||
uint16_t display_objid; //Connector Object ID or Misc Object ID
|
||
uint16_t disp_recordoffset;
|
||
uint16_t encoderobjid; //first encoder closer to the connector, could be either an external or intenal encoder
|
||
uint16_t extencoderobjid; //2nd encoder after the first encoder, from the connector point of view;
|
||
uint16_t encoder_recordoffset;
|
||
uint16_t extencoder_recordoffset;
|
||
uint16_t device_tag; //a supported device vector, each display path starts with this.the paths are enumerated in the way of priority, a path appears first
|
||
uint8_t priority_id;
|
||
uint8_t reserved;
|
||
};
|
||
|
||
struct atom_display_object_path_v3 {
|
||
uint16_t display_objid; //Connector Object ID or Misc Object ID
|
||
uint16_t disp_recordoffset;
|
||
uint16_t encoderobjid; //first encoder closer to the connector, could be either an external or intenal encoder
|
||
uint16_t reserved1; //only on USBC case, otherwise always = 0
|
||
uint16_t reserved2; //reserved and always = 0
|
||
uint16_t reserved3; //reserved and always = 0
|
||
//a supported device vector, each display path starts with this.the paths are enumerated in the way of priority,
|
||
//a path appears first
|
||
uint16_t device_tag;
|
||
uint16_t reserved4; //reserved and always = 0
|
||
};
|
||
|
||
struct display_object_info_table_v1_4
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint16_t supporteddevices;
|
||
uint8_t number_of_path;
|
||
uint8_t reserved;
|
||
struct atom_display_object_path_v2 display_path[8]; //the real number of this included in the structure is calculated by using the (whole structure size - the header size- number_of_path)/size of atom_display_object_path
|
||
};
|
||
|
||
struct display_object_info_table_v1_5 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t supporteddevices;
|
||
uint8_t number_of_path;
|
||
uint8_t reserved;
|
||
// the real number of this included in the structure is calculated by using the
|
||
// (whole structure size - the header size- number_of_path)/size of atom_display_object_path
|
||
struct atom_display_object_path_v3 display_path[8];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table dce_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_display_controller_info_v4_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t display_caps;
|
||
uint32_t bootup_dispclk_10khz;
|
||
uint16_t dce_refclk_10khz;
|
||
uint16_t i2c_engine_refclk_10khz;
|
||
uint16_t dvi_ss_percentage; // in unit of 0.001%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; // in unit of 0.001%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dp_ss_percentage; // in unit of 0.001%
|
||
uint16_t dp_ss_rate_10hz;
|
||
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t ss_reserved;
|
||
uint8_t hardcode_mode_num; // a hardcode mode number defined in StandardVESA_TimingTable when a CRT or DFP EDID is not available
|
||
uint8_t reserved1[3];
|
||
uint16_t dpphy_refclk_10khz;
|
||
uint16_t reserved2;
|
||
uint8_t dceip_min_ver;
|
||
uint8_t dceip_max_ver;
|
||
uint8_t max_disp_pipe_num;
|
||
uint8_t max_vbios_active_disp_pipe_num;
|
||
uint8_t max_ppll_num;
|
||
uint8_t max_disp_phy_num;
|
||
uint8_t max_aux_pairs;
|
||
uint8_t remotedisplayconfig;
|
||
uint8_t reserved3[8];
|
||
};
|
||
|
||
struct atom_display_controller_info_v4_2
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t display_caps;
|
||
uint32_t bootup_dispclk_10khz;
|
||
uint16_t dce_refclk_10khz;
|
||
uint16_t i2c_engine_refclk_10khz;
|
||
uint16_t dvi_ss_percentage; // in unit of 0.001%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; // in unit of 0.001%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dp_ss_percentage; // in unit of 0.001%
|
||
uint16_t dp_ss_rate_10hz;
|
||
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t ss_reserved;
|
||
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint16_t dpphy_refclk_10khz;
|
||
uint16_t reserved2;
|
||
uint8_t dcnip_min_ver;
|
||
uint8_t dcnip_max_ver;
|
||
uint8_t max_disp_pipe_num;
|
||
uint8_t max_vbios_active_disp_pipe_num;
|
||
uint8_t max_ppll_num;
|
||
uint8_t max_disp_phy_num;
|
||
uint8_t max_aux_pairs;
|
||
uint8_t remotedisplayconfig;
|
||
uint8_t reserved3[8];
|
||
};
|
||
|
||
struct atom_display_controller_info_v4_3
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t display_caps;
|
||
uint32_t bootup_dispclk_10khz;
|
||
uint16_t dce_refclk_10khz;
|
||
uint16_t i2c_engine_refclk_10khz;
|
||
uint16_t dvi_ss_percentage; // in unit of 0.001%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; // in unit of 0.001%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dp_ss_percentage; // in unit of 0.001%
|
||
uint16_t dp_ss_rate_10hz;
|
||
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t ss_reserved;
|
||
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint16_t dpphy_refclk_10khz;
|
||
uint16_t reserved2;
|
||
uint8_t dcnip_min_ver;
|
||
uint8_t dcnip_max_ver;
|
||
uint8_t max_disp_pipe_num;
|
||
uint8_t max_vbios_active_disp_pipe_num;
|
||
uint8_t max_ppll_num;
|
||
uint8_t max_disp_phy_num;
|
||
uint8_t max_aux_pairs;
|
||
uint8_t remotedisplayconfig;
|
||
uint8_t reserved3[8];
|
||
};
|
||
|
||
struct atom_display_controller_info_v4_4 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t display_caps;
|
||
uint32_t bootup_dispclk_10khz;
|
||
uint16_t dce_refclk_10khz;
|
||
uint16_t i2c_engine_refclk_10khz;
|
||
uint16_t dvi_ss_percentage; // in unit of 0.001%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; // in unit of 0.001%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dp_ss_percentage; // in unit of 0.001%
|
||
uint16_t dp_ss_rate_10hz;
|
||
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t ss_reserved;
|
||
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint16_t dpphy_refclk_10khz;
|
||
uint16_t hw_chip_id;
|
||
uint8_t dcnip_min_ver;
|
||
uint8_t dcnip_max_ver;
|
||
uint8_t max_disp_pipe_num;
|
||
uint8_t max_vbios_active_disp_pipum;
|
||
uint8_t max_ppll_num;
|
||
uint8_t max_disp_phy_num;
|
||
uint8_t max_aux_pairs;
|
||
uint8_t remotedisplayconfig;
|
||
uint32_t dispclk_pll_vco_freq;
|
||
uint32_t dp_ref_clk_freq;
|
||
uint32_t max_mclk_chg_lat; // Worst case blackout duration for a memory clock frequency (p-state) change, units of 100s of ns (0.1 us)
|
||
uint32_t max_sr_exit_lat; // Worst case memory self refresh exit time, units of 100ns of ns (0.1us)
|
||
uint32_t max_sr_enter_exit_lat; // Worst case memory self refresh entry followed by immediate exit time, units of 100ns of ns (0.1us)
|
||
uint16_t dc_golden_table_offset; // point of struct of atom_dc_golden_table_vxx
|
||
uint16_t dc_golden_table_ver;
|
||
uint32_t reserved3[3];
|
||
};
|
||
|
||
struct atom_dc_golden_table_v1
|
||
{
|
||
uint32_t aux_dphy_rx_control0_val;
|
||
uint32_t aux_dphy_tx_control_val;
|
||
uint32_t aux_dphy_rx_control1_val;
|
||
uint32_t dc_gpio_aux_ctrl_0_val;
|
||
uint32_t dc_gpio_aux_ctrl_1_val;
|
||
uint32_t dc_gpio_aux_ctrl_2_val;
|
||
uint32_t dc_gpio_aux_ctrl_3_val;
|
||
uint32_t dc_gpio_aux_ctrl_4_val;
|
||
uint32_t dc_gpio_aux_ctrl_5_val;
|
||
uint32_t reserved[23];
|
||
};
|
||
|
||
enum dce_info_caps_def {
|
||
// only for VBIOS
|
||
DCE_INFO_CAPS_FORCE_DISPDEV_CONNECTED = 0x02,
|
||
// only for VBIOS
|
||
DCE_INFO_CAPS_DISABLE_DFP_DP_HBR2 = 0x04,
|
||
// only for VBIOS
|
||
DCE_INFO_CAPS_ENABLE_INTERLAC_TIMING = 0x08,
|
||
// only for VBIOS
|
||
DCE_INFO_CAPS_LTTPR_SUPPORT_ENABLE = 0x20,
|
||
DCE_INFO_CAPS_VBIOS_LTTPR_TRANSPARENT_ENABLE = 0x40,
|
||
};
|
||
|
||
struct atom_display_controller_info_v4_5
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t display_caps;
|
||
uint32_t bootup_dispclk_10khz;
|
||
uint16_t dce_refclk_10khz;
|
||
uint16_t i2c_engine_refclk_10khz;
|
||
uint16_t dvi_ss_percentage; // in unit of 0.001%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; // in unit of 0.001%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dp_ss_percentage; // in unit of 0.001%
|
||
uint16_t dp_ss_rate_10hz;
|
||
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint8_t ss_reserved;
|
||
// DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t dfp_hardcode_mode_num;
|
||
// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
|
||
uint8_t dfp_hardcode_refreshrate;
|
||
// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint8_t vga_hardcode_mode_num;
|
||
// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
|
||
uint8_t vga_hardcode_refreshrate;
|
||
uint16_t dpphy_refclk_10khz;
|
||
uint16_t hw_chip_id;
|
||
uint8_t dcnip_min_ver;
|
||
uint8_t dcnip_max_ver;
|
||
uint8_t max_disp_pipe_num;
|
||
uint8_t max_vbios_active_disp_pipe_num;
|
||
uint8_t max_ppll_num;
|
||
uint8_t max_disp_phy_num;
|
||
uint8_t max_aux_pairs;
|
||
uint8_t remotedisplayconfig;
|
||
uint32_t dispclk_pll_vco_freq;
|
||
uint32_t dp_ref_clk_freq;
|
||
// Worst case blackout duration for a memory clock frequency (p-state) change, units of 100s of ns (0.1 us)
|
||
uint32_t max_mclk_chg_lat;
|
||
// Worst case memory self refresh exit time, units of 100ns of ns (0.1us)
|
||
uint32_t max_sr_exit_lat;
|
||
// Worst case memory self refresh entry followed by immediate exit time, units of 100ns of ns (0.1us)
|
||
uint32_t max_sr_enter_exit_lat;
|
||
uint16_t dc_golden_table_offset; // point of struct of atom_dc_golden_table_vxx
|
||
uint16_t dc_golden_table_ver;
|
||
uint32_t aux_dphy_rx_control0_val;
|
||
uint32_t aux_dphy_tx_control_val;
|
||
uint32_t aux_dphy_rx_control1_val;
|
||
uint32_t dc_gpio_aux_ctrl_0_val;
|
||
uint32_t dc_gpio_aux_ctrl_1_val;
|
||
uint32_t dc_gpio_aux_ctrl_2_val;
|
||
uint32_t dc_gpio_aux_ctrl_3_val;
|
||
uint32_t dc_gpio_aux_ctrl_4_val;
|
||
uint32_t dc_gpio_aux_ctrl_5_val;
|
||
uint32_t reserved[26];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_ext_display_path
|
||
{
|
||
uint16_t device_tag; //A bit vector to show what devices are supported
|
||
uint16_t device_acpi_enum; //16bit device ACPI id.
|
||
uint16_t connectorobjid; //A physical connector for displays to plug in, using object connector definitions
|
||
uint8_t auxddclut_index; //An index into external AUX/DDC channel LUT
|
||
uint8_t hpdlut_index; //An index into external HPD pin LUT
|
||
uint16_t ext_encoder_objid; //external encoder object id
|
||
uint8_t channelmapping; // if ucChannelMapping=0, using default one to one mapping
|
||
uint8_t chpninvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
|
||
uint16_t caps;
|
||
uint16_t reserved;
|
||
};
|
||
|
||
//usCaps
|
||
enum ext_display_path_cap_def {
|
||
EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE = 0x0001,
|
||
EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN = 0x0002,
|
||
EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK = 0x007C,
|
||
EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204 = (0x01 << 2), //PI redriver chip
|
||
EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT = (0x02 << 2), //TI retimer chip
|
||
EXT_DISPLAY_PATH_CAPS__HDMI20_PARADE_PS175 = (0x03 << 2) //Parade DP->HDMI recoverter chip
|
||
};
|
||
|
||
struct atom_external_display_connection_info
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t guid[16]; // a GUID is a 16 byte long string
|
||
struct atom_ext_display_path path[7]; // total of fixed 7 entries.
|
||
uint8_t checksum; // a simple Checksum of the sum of whole structure equal to 0x0.
|
||
uint8_t stereopinid; // use for eDP panel
|
||
uint8_t remotedisplayconfig;
|
||
uint8_t edptolvdsrxid;
|
||
uint8_t fixdpvoltageswing; // usCaps[1]=1, this indicate DP_LANE_SET value
|
||
uint8_t reserved[3]; // for potential expansion
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table integratedsysteminfo structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct atom_camera_dphy_timing_param
|
||
{
|
||
uint8_t profile_id; // SENSOR_PROFILES
|
||
uint32_t param;
|
||
};
|
||
|
||
struct atom_camera_dphy_elec_param
|
||
{
|
||
uint16_t param[3];
|
||
};
|
||
|
||
struct atom_camera_module_info
|
||
{
|
||
uint8_t module_id; // 0: Rear, 1: Front right of user, 2: Front left of user
|
||
uint8_t module_name[8];
|
||
struct atom_camera_dphy_timing_param timingparam[6]; // Exact number is under estimation and confirmation from sensor vendor
|
||
};
|
||
|
||
struct atom_camera_flashlight_info
|
||
{
|
||
uint8_t flashlight_id; // 0: Rear, 1: Front
|
||
uint8_t name[8];
|
||
};
|
||
|
||
struct atom_camera_data
|
||
{
|
||
uint32_t versionCode;
|
||
struct atom_camera_module_info cameraInfo[3]; // Assuming 3 camera sensors max
|
||
struct atom_camera_flashlight_info flashInfo; // Assuming 1 flashlight max
|
||
struct atom_camera_dphy_elec_param dphy_param;
|
||
uint32_t crc_val; // CRC
|
||
};
|
||
|
||
|
||
struct atom_14nm_dpphy_dvihdmi_tuningset
|
||
{
|
||
uint32_t max_symclk_in10khz;
|
||
uint8_t encoder_mode; //atom_encode_mode_def, =2: DVI, =3: HDMI mode
|
||
uint8_t phy_sel; //bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
|
||
uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom
|
||
uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4
|
||
uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset
|
||
uint8_t tx_driver_fifty_ohms; //COMMON_ZCALCODE_CTRL[21].tx_driver_fifty_ohms
|
||
uint8_t deemph_sel; //MARGIN_DEEMPH_LANE0.DEEMPH_SEL
|
||
};
|
||
|
||
struct atom_14nm_dpphy_dp_setting{
|
||
uint8_t dp_vs_pemph_level; //enum of atom_dp_vs_preemph_def
|
||
uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom
|
||
uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4
|
||
uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset
|
||
};
|
||
|
||
struct atom_14nm_dpphy_dp_tuningset{
|
||
uint8_t phy_sel; // bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
|
||
uint8_t version;
|
||
uint16_t table_size; // size of atom_14nm_dpphy_dp_tuningset
|
||
uint16_t reserved;
|
||
struct atom_14nm_dpphy_dp_setting dptuning[10];
|
||
};
|
||
|
||
struct atom_14nm_dig_transmitter_info_header_v4_0{
|
||
struct atom_common_table_header table_header;
|
||
uint16_t pcie_phy_tmds_hdmi_macro_settings_offset; // offset of PCIEPhyTMDSHDMIMacroSettingsTbl
|
||
uint16_t uniphy_vs_emph_lookup_table_offset; // offset of UniphyVSEmphLookUpTbl
|
||
uint16_t uniphy_xbar_settings_table_offset; // offset of UniphyXbarSettingsTbl
|
||
};
|
||
|
||
struct atom_14nm_combphy_tmds_vs_set
|
||
{
|
||
uint8_t sym_clk;
|
||
uint8_t dig_mode;
|
||
uint8_t phy_sel;
|
||
uint16_t common_mar_deemph_nom__margin_deemph_val;
|
||
uint8_t common_seldeemph60__deemph_6db_4_val;
|
||
uint8_t cmd_bus_global_for_tx_lane0__boostadj_val ;
|
||
uint8_t common_zcalcode_ctrl__tx_driver_fifty_ohms_val;
|
||
uint8_t margin_deemph_lane0__deemph_sel_val;
|
||
};
|
||
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset
|
||
{
|
||
uint32_t max_symclk_in10khz;
|
||
uint8_t encoder_mode; //atom_encode_mode_def, =2: DVI, =3: HDMI mode
|
||
uint8_t phy_sel; //bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
|
||
uint8_t tx_eq_main; // map to RDPCSTX_PHY_FUSE0/1/2/3[5:0](EQ_MAIN)
|
||
uint8_t tx_eq_pre; // map to RDPCSTX_PHY_FUSE0/1/2/3[11:6](EQ_PRE)
|
||
uint8_t tx_eq_post; // map to RDPCSTX_PHY_FUSE0/1/2/3[17:12](EQ_POST)
|
||
uint8_t reserved1;
|
||
uint8_t tx_vboost_lvl; // tx_vboost_lvl, map to RDPCSTX_PHY_CNTL0.RDPCS_PHY_TX_VBOOST_LVL
|
||
uint8_t reserved2;
|
||
};
|
||
|
||
struct atom_DCN_dpphy_dp_setting{
|
||
uint8_t dp_vs_pemph_level; //enum of atom_dp_vs_preemph_def
|
||
uint8_t tx_eq_main; // map to RDPCSTX_PHY_FUSE0/1/2/3[5:0](EQ_MAIN)
|
||
uint8_t tx_eq_pre; // map to RDPCSTX_PHY_FUSE0/1/2/3[11:6](EQ_PRE)
|
||
uint8_t tx_eq_post; // map to RDPCSTX_PHY_FUSE0/1/2/3[17:12](EQ_POST)
|
||
uint8_t tx_vboost_lvl; // tx_vboost_lvl, map to RDPCSTX_PHY_CNTL0.RDPCS_PHY_TX_VBOOST_LVL
|
||
};
|
||
|
||
struct atom_DCN_dpphy_dp_tuningset{
|
||
uint8_t phy_sel; // bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
|
||
uint8_t version;
|
||
uint16_t table_size; // size of atom_14nm_dpphy_dp_setting
|
||
uint16_t reserved;
|
||
struct atom_DCN_dpphy_dp_setting dptunings[10];
|
||
};
|
||
|
||
struct atom_i2c_reg_info {
|
||
uint8_t ucI2cRegIndex;
|
||
uint8_t ucI2cRegVal;
|
||
};
|
||
|
||
struct atom_hdmi_retimer_redriver_set {
|
||
uint8_t HdmiSlvAddr;
|
||
uint8_t HdmiRegNum;
|
||
uint8_t Hdmi6GRegNum;
|
||
struct atom_i2c_reg_info HdmiRegSetting[9]; //For non 6G Hz use
|
||
struct atom_i2c_reg_info Hdmi6GhzRegSetting[3]; //For 6G Hz use.
|
||
};
|
||
|
||
struct atom_integrated_system_info_v1_11
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
|
||
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
|
||
uint32_t system_config;
|
||
uint32_t cpucapinfo;
|
||
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t gpuclk_ss_type;
|
||
uint16_t lvds_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t lvds_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dvi_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
|
||
uint16_t lvds_misc; // enum of atom_sys_info_lvds_misc_def
|
||
uint16_t backlight_pwm_hz; // pwm frequency in hz
|
||
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
|
||
uint8_t umachannelnumber; // number of memory channels
|
||
uint8_t pwr_on_digon_to_de; /* all pwr sequence numbers below are in uint of 4ms */
|
||
uint8_t pwr_on_de_to_vary_bl;
|
||
uint8_t pwr_down_vary_bloff_to_de;
|
||
uint8_t pwr_down_de_to_digoff;
|
||
uint8_t pwr_off_delay;
|
||
uint8_t pwr_on_vary_bl_to_blon;
|
||
uint8_t pwr_down_bloff_to_vary_bloff;
|
||
uint8_t min_allowed_bl_level;
|
||
uint8_t htc_hyst_limit;
|
||
uint8_t htc_tmp_limit;
|
||
uint8_t reserved1;
|
||
uint8_t reserved2;
|
||
struct atom_external_display_connection_info extdispconninfo;
|
||
struct atom_14nm_dpphy_dvihdmi_tuningset dvi_tuningset;
|
||
struct atom_14nm_dpphy_dvihdmi_tuningset hdmi_tuningset;
|
||
struct atom_14nm_dpphy_dvihdmi_tuningset hdmi6g_tuningset;
|
||
struct atom_14nm_dpphy_dp_tuningset dp_tuningset; // rbr 1.62G dp tuning set
|
||
struct atom_14nm_dpphy_dp_tuningset dp_hbr3_tuningset; // HBR3 dp tuning set
|
||
struct atom_camera_data camera_info;
|
||
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
|
||
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
|
||
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
|
||
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
|
||
struct atom_14nm_dpphy_dp_tuningset dp_hbr_tuningset; //hbr 2.7G dp tuning set
|
||
struct atom_14nm_dpphy_dp_tuningset dp_hbr2_tuningset; //hbr2 5.4G dp turnig set
|
||
struct atom_14nm_dpphy_dp_tuningset edp_tuningset; //edp tuning set
|
||
uint32_t reserved[66];
|
||
};
|
||
|
||
struct atom_integrated_system_info_v1_12
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
|
||
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
|
||
uint32_t system_config;
|
||
uint32_t cpucapinfo;
|
||
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t gpuclk_ss_type;
|
||
uint16_t lvds_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t lvds_ss_rate_10hz;
|
||
uint16_t hdmi_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t hdmi_ss_rate_10hz;
|
||
uint16_t dvi_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t dvi_ss_rate_10hz;
|
||
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
|
||
uint16_t lvds_misc; // enum of atom_sys_info_lvds_misc_def
|
||
uint16_t backlight_pwm_hz; // pwm frequency in hz
|
||
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
|
||
uint8_t umachannelnumber; // number of memory channels
|
||
uint8_t pwr_on_digon_to_de; // all pwr sequence numbers below are in uint of 4ms //
|
||
uint8_t pwr_on_de_to_vary_bl;
|
||
uint8_t pwr_down_vary_bloff_to_de;
|
||
uint8_t pwr_down_de_to_digoff;
|
||
uint8_t pwr_off_delay;
|
||
uint8_t pwr_on_vary_bl_to_blon;
|
||
uint8_t pwr_down_bloff_to_vary_bloff;
|
||
uint8_t min_allowed_bl_level;
|
||
uint8_t htc_hyst_limit;
|
||
uint8_t htc_tmp_limit;
|
||
uint8_t reserved1;
|
||
uint8_t reserved2;
|
||
struct atom_external_display_connection_info extdispconninfo;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset TMDS_tuningset;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK5_tuningset;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK8_tuningset;
|
||
struct atom_DCN_dpphy_dp_tuningset rbr_tuningset; // rbr 1.62G dp tuning set
|
||
struct atom_DCN_dpphy_dp_tuningset hbr3_tuningset; // HBR3 dp tuning set
|
||
struct atom_camera_data camera_info;
|
||
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
|
||
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
|
||
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
|
||
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
|
||
struct atom_DCN_dpphy_dp_tuningset hbr_tuningset; //hbr 2.7G dp tuning set
|
||
struct atom_DCN_dpphy_dp_tuningset hbr2_tuningset; //hbr2 5.4G dp turnig set
|
||
struct atom_DCN_dpphy_dp_tuningset edp_tunings; //edp tuning set
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK6_tuningset;
|
||
uint32_t reserved[63];
|
||
};
|
||
|
||
struct edp_info_table
|
||
{
|
||
uint16_t edp_backlight_pwm_hz;
|
||
uint16_t edp_ss_percentage;
|
||
uint16_t edp_ss_rate_10hz;
|
||
uint16_t reserved1;
|
||
uint32_t reserved2;
|
||
uint8_t edp_pwr_on_off_delay;
|
||
uint8_t edp_pwr_on_vary_bl_to_blon;
|
||
uint8_t edp_pwr_down_bloff_to_vary_bloff;
|
||
uint8_t edp_panel_bpc;
|
||
uint8_t edp_bootup_bl_level;
|
||
uint8_t reserved3[3];
|
||
uint32_t reserved4[3];
|
||
};
|
||
|
||
struct atom_integrated_system_info_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
|
||
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
|
||
uint32_t system_config;
|
||
uint32_t cpucapinfo;
|
||
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t gpuclk_ss_type;
|
||
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
|
||
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
|
||
uint8_t umachannelnumber; // number of memory channels
|
||
uint8_t htc_hyst_limit;
|
||
uint8_t htc_tmp_limit;
|
||
uint8_t reserved1;
|
||
uint8_t reserved2;
|
||
struct edp_info_table edp1_info;
|
||
struct edp_info_table edp2_info;
|
||
uint32_t reserved3[8];
|
||
struct atom_external_display_connection_info extdispconninfo;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset TMDS_tuningset;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK5_tuningset; //add clk6
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK6_tuningset;
|
||
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK8_tuningset;
|
||
uint32_t reserved4[6];//reserve 2*sizeof(atom_DCN_dpphy_dvihdmi_tuningset)
|
||
struct atom_DCN_dpphy_dp_tuningset rbr_tuningset; // rbr 1.62G dp tuning set
|
||
struct atom_DCN_dpphy_dp_tuningset hbr_tuningset; //hbr 2.7G dp tuning set
|
||
struct atom_DCN_dpphy_dp_tuningset hbr2_tuningset; //hbr2 5.4G dp turnig set
|
||
struct atom_DCN_dpphy_dp_tuningset hbr3_tuningset; // HBR3 dp tuning set
|
||
struct atom_DCN_dpphy_dp_tuningset edp_tunings; //edp tuning set
|
||
uint32_t reserved5[28];//reserve 2*sizeof(atom_DCN_dpphy_dp_tuningset)
|
||
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
|
||
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
|
||
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
|
||
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
|
||
uint32_t reserved6[30];// reserve size of(atom_camera_data) for camera_info
|
||
uint32_t reserved7[32];
|
||
|
||
};
|
||
|
||
struct atom_n6_display_phy_tuning_set {
|
||
uint8_t display_signal_type;
|
||
uint8_t phy_sel;
|
||
uint8_t preset_level;
|
||
uint8_t reserved1;
|
||
uint32_t reserved2;
|
||
uint32_t speed_upto;
|
||
uint8_t tx_vboost_level;
|
||
uint8_t tx_vreg_v2i;
|
||
uint8_t tx_vregdrv_byp;
|
||
uint8_t tx_term_cntl;
|
||
uint8_t tx_peak_level;
|
||
uint8_t tx_slew_en;
|
||
uint8_t tx_eq_pre;
|
||
uint8_t tx_eq_main;
|
||
uint8_t tx_eq_post;
|
||
uint8_t tx_en_inv_pre;
|
||
uint8_t tx_en_inv_post;
|
||
uint8_t reserved3;
|
||
uint32_t reserved4;
|
||
uint32_t reserved5;
|
||
uint32_t reserved6;
|
||
};
|
||
|
||
struct atom_display_phy_tuning_info {
|
||
struct atom_common_table_header table_header;
|
||
struct atom_n6_display_phy_tuning_set disp_phy_tuning[1];
|
||
};
|
||
|
||
struct atom_integrated_system_info_v2_2
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
|
||
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
|
||
uint32_t system_config;
|
||
uint32_t cpucapinfo;
|
||
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
|
||
uint16_t gpuclk_ss_type;
|
||
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
|
||
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
|
||
uint8_t umachannelnumber; // number of memory channels
|
||
uint8_t htc_hyst_limit;
|
||
uint8_t htc_tmp_limit;
|
||
uint8_t reserved1;
|
||
uint8_t reserved2;
|
||
struct edp_info_table edp1_info;
|
||
struct edp_info_table edp2_info;
|
||
uint32_t reserved3[8];
|
||
struct atom_external_display_connection_info extdispconninfo;
|
||
|
||
uint32_t reserved4[189];
|
||
};
|
||
|
||
// system_config
|
||
enum atom_system_vbiosmisc_def{
|
||
INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT = 0x01,
|
||
};
|
||
|
||
|
||
// gpucapinfo
|
||
enum atom_system_gpucapinf_def{
|
||
SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS = 0x10,
|
||
};
|
||
|
||
//dpphy_override
|
||
enum atom_sysinfo_dpphy_override_def{
|
||
ATOM_ENABLE_DVI_TUNINGSET = 0x01,
|
||
ATOM_ENABLE_HDMI_TUNINGSET = 0x02,
|
||
ATOM_ENABLE_HDMI6G_TUNINGSET = 0x04,
|
||
ATOM_ENABLE_DP_TUNINGSET = 0x08,
|
||
ATOM_ENABLE_DP_HBR3_TUNINGSET = 0x10,
|
||
};
|
||
|
||
//lvds_misc
|
||
enum atom_sys_info_lvds_misc_def
|
||
{
|
||
SYS_INFO_LVDS_MISC_888_FPDI_MODE =0x01,
|
||
SYS_INFO_LVDS_MISC_888_BPC_MODE =0x04,
|
||
SYS_INFO_LVDS_MISC_OVERRIDE_EN =0x08,
|
||
};
|
||
|
||
|
||
//memorytype DMI Type 17 offset 12h - Memory Type
|
||
enum atom_dmi_t17_mem_type_def{
|
||
OtherMemType = 0x01, ///< Assign 01 to Other
|
||
UnknownMemType, ///< Assign 02 to Unknown
|
||
DramMemType, ///< Assign 03 to DRAM
|
||
EdramMemType, ///< Assign 04 to EDRAM
|
||
VramMemType, ///< Assign 05 to VRAM
|
||
SramMemType, ///< Assign 06 to SRAM
|
||
RamMemType, ///< Assign 07 to RAM
|
||
RomMemType, ///< Assign 08 to ROM
|
||
FlashMemType, ///< Assign 09 to Flash
|
||
EepromMemType, ///< Assign 10 to EEPROM
|
||
FepromMemType, ///< Assign 11 to FEPROM
|
||
EpromMemType, ///< Assign 12 to EPROM
|
||
CdramMemType, ///< Assign 13 to CDRAM
|
||
ThreeDramMemType, ///< Assign 14 to 3DRAM
|
||
SdramMemType, ///< Assign 15 to SDRAM
|
||
SgramMemType, ///< Assign 16 to SGRAM
|
||
RdramMemType, ///< Assign 17 to RDRAM
|
||
DdrMemType, ///< Assign 18 to DDR
|
||
Ddr2MemType, ///< Assign 19 to DDR2
|
||
Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM
|
||
Ddr3MemType = 0x18, ///< Assign 24 to DDR3
|
||
Fbd2MemType, ///< Assign 25 to FBD2
|
||
Ddr4MemType, ///< Assign 26 to DDR4
|
||
LpDdrMemType, ///< Assign 27 to LPDDR
|
||
LpDdr2MemType, ///< Assign 28 to LPDDR2
|
||
LpDdr3MemType, ///< Assign 29 to LPDDR3
|
||
LpDdr4MemType, ///< Assign 30 to LPDDR4
|
||
GDdr6MemType, ///< Assign 31 to GDDR6
|
||
HbmMemType, ///< Assign 32 to HBM
|
||
Hbm2MemType, ///< Assign 33 to HBM2
|
||
Ddr5MemType, ///< Assign 34 to DDR5
|
||
LpDdr5MemType, ///< Assign 35 to LPDDR5
|
||
};
|
||
|
||
|
||
// this Table is used starting from NL/AM, used by SBIOS and pass the IntegratedSystemInfoTable/PowerPlayInfoTable/SystemCameraInfoTable
|
||
struct atom_fusion_system_info_v4
|
||
{
|
||
struct atom_integrated_system_info_v1_11 sysinfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
|
||
uint32_t powerplayinfo[256]; // Reserve 1024 bytes space for PowerPlayInfoTable
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table gfx_info structure
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct atom_gfx_info_v2_2
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t gfxip_min_ver;
|
||
uint8_t gfxip_max_ver;
|
||
uint8_t max_shader_engines;
|
||
uint8_t max_tile_pipes;
|
||
uint8_t max_cu_per_sh;
|
||
uint8_t max_sh_per_se;
|
||
uint8_t max_backends_per_se;
|
||
uint8_t max_texture_channel_caches;
|
||
uint32_t regaddr_cp_dma_src_addr;
|
||
uint32_t regaddr_cp_dma_src_addr_hi;
|
||
uint32_t regaddr_cp_dma_dst_addr;
|
||
uint32_t regaddr_cp_dma_dst_addr_hi;
|
||
uint32_t regaddr_cp_dma_command;
|
||
uint32_t regaddr_cp_status;
|
||
uint32_t regaddr_rlc_gpu_clock_32;
|
||
uint32_t rlc_gpu_timer_refclk;
|
||
};
|
||
|
||
struct atom_gfx_info_v2_3 {
|
||
struct atom_common_table_header table_header;
|
||
uint8_t gfxip_min_ver;
|
||
uint8_t gfxip_max_ver;
|
||
uint8_t max_shader_engines;
|
||
uint8_t max_tile_pipes;
|
||
uint8_t max_cu_per_sh;
|
||
uint8_t max_sh_per_se;
|
||
uint8_t max_backends_per_se;
|
||
uint8_t max_texture_channel_caches;
|
||
uint32_t regaddr_cp_dma_src_addr;
|
||
uint32_t regaddr_cp_dma_src_addr_hi;
|
||
uint32_t regaddr_cp_dma_dst_addr;
|
||
uint32_t regaddr_cp_dma_dst_addr_hi;
|
||
uint32_t regaddr_cp_dma_command;
|
||
uint32_t regaddr_cp_status;
|
||
uint32_t regaddr_rlc_gpu_clock_32;
|
||
uint32_t rlc_gpu_timer_refclk;
|
||
uint8_t active_cu_per_sh;
|
||
uint8_t active_rb_per_se;
|
||
uint16_t gcgoldenoffset;
|
||
uint32_t rm21_sram_vmin_value;
|
||
};
|
||
|
||
struct atom_gfx_info_v2_4
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t gfxip_min_ver;
|
||
uint8_t gfxip_max_ver;
|
||
uint8_t max_shader_engines;
|
||
uint8_t reserved;
|
||
uint8_t max_cu_per_sh;
|
||
uint8_t max_sh_per_se;
|
||
uint8_t max_backends_per_se;
|
||
uint8_t max_texture_channel_caches;
|
||
uint32_t regaddr_cp_dma_src_addr;
|
||
uint32_t regaddr_cp_dma_src_addr_hi;
|
||
uint32_t regaddr_cp_dma_dst_addr;
|
||
uint32_t regaddr_cp_dma_dst_addr_hi;
|
||
uint32_t regaddr_cp_dma_command;
|
||
uint32_t regaddr_cp_status;
|
||
uint32_t regaddr_rlc_gpu_clock_32;
|
||
uint32_t rlc_gpu_timer_refclk;
|
||
uint8_t active_cu_per_sh;
|
||
uint8_t active_rb_per_se;
|
||
uint16_t gcgoldenoffset;
|
||
uint16_t gc_num_gprs;
|
||
uint16_t gc_gsprim_buff_depth;
|
||
uint16_t gc_parameter_cache_depth;
|
||
uint16_t gc_wave_size;
|
||
uint16_t gc_max_waves_per_simd;
|
||
uint16_t gc_lds_size;
|
||
uint8_t gc_num_max_gs_thds;
|
||
uint8_t gc_gs_table_depth;
|
||
uint8_t gc_double_offchip_lds_buffer;
|
||
uint8_t gc_max_scratch_slots_per_cu;
|
||
uint32_t sram_rm_fuses_val;
|
||
uint32_t sram_custom_rm_fuses_val;
|
||
};
|
||
|
||
struct atom_gfx_info_v2_7 {
|
||
struct atom_common_table_header table_header;
|
||
uint8_t gfxip_min_ver;
|
||
uint8_t gfxip_max_ver;
|
||
uint8_t max_shader_engines;
|
||
uint8_t reserved;
|
||
uint8_t max_cu_per_sh;
|
||
uint8_t max_sh_per_se;
|
||
uint8_t max_backends_per_se;
|
||
uint8_t max_texture_channel_caches;
|
||
uint32_t regaddr_cp_dma_src_addr;
|
||
uint32_t regaddr_cp_dma_src_addr_hi;
|
||
uint32_t regaddr_cp_dma_dst_addr;
|
||
uint32_t regaddr_cp_dma_dst_addr_hi;
|
||
uint32_t regaddr_cp_dma_command;
|
||
uint32_t regaddr_cp_status;
|
||
uint32_t regaddr_rlc_gpu_clock_32;
|
||
uint32_t rlc_gpu_timer_refclk;
|
||
uint8_t active_cu_per_sh;
|
||
uint8_t active_rb_per_se;
|
||
uint16_t gcgoldenoffset;
|
||
uint16_t gc_num_gprs;
|
||
uint16_t gc_gsprim_buff_depth;
|
||
uint16_t gc_parameter_cache_depth;
|
||
uint16_t gc_wave_size;
|
||
uint16_t gc_max_waves_per_simd;
|
||
uint16_t gc_lds_size;
|
||
uint8_t gc_num_max_gs_thds;
|
||
uint8_t gc_gs_table_depth;
|
||
uint8_t gc_double_offchip_lds_buffer;
|
||
uint8_t gc_max_scratch_slots_per_cu;
|
||
uint32_t sram_rm_fuses_val;
|
||
uint32_t sram_custom_rm_fuses_val;
|
||
uint8_t cut_cu;
|
||
uint8_t active_cu_total;
|
||
uint8_t cu_reserved[2];
|
||
uint32_t gc_config;
|
||
uint8_t inactive_cu_per_se[8];
|
||
uint32_t reserved2[6];
|
||
};
|
||
|
||
struct atom_gfx_info_v3_0 {
|
||
struct atom_common_table_header table_header;
|
||
uint8_t gfxip_min_ver;
|
||
uint8_t gfxip_max_ver;
|
||
uint8_t max_shader_engines;
|
||
uint8_t max_tile_pipes;
|
||
uint8_t max_cu_per_sh;
|
||
uint8_t max_sh_per_se;
|
||
uint8_t max_backends_per_se;
|
||
uint8_t max_texture_channel_caches;
|
||
uint32_t regaddr_lsdma_queue0_rb_rptr;
|
||
uint32_t regaddr_lsdma_queue0_rb_rptr_hi;
|
||
uint32_t regaddr_lsdma_queue0_rb_wptr;
|
||
uint32_t regaddr_lsdma_queue0_rb_wptr_hi;
|
||
uint32_t regaddr_lsdma_command;
|
||
uint32_t regaddr_lsdma_status;
|
||
uint32_t regaddr_golden_tsc_count_lower;
|
||
uint32_t golden_tsc_count_lower_refclk;
|
||
uint8_t active_wgp_per_se;
|
||
uint8_t active_rb_per_se;
|
||
uint8_t active_se;
|
||
uint8_t reserved1;
|
||
uint32_t sram_rm_fuses_val;
|
||
uint32_t sram_custom_rm_fuses_val;
|
||
uint32_t inactive_sa_mask;
|
||
uint32_t gc_config;
|
||
uint8_t inactive_wgp[16];
|
||
uint8_t inactive_rb[16];
|
||
uint32_t gdfll_as_wait_ctrl_val;
|
||
uint32_t gdfll_as_step_ctrl_val;
|
||
uint32_t reserved[8];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table smu_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_smu_info_v3_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t smuip_min_ver;
|
||
uint8_t smuip_max_ver;
|
||
uint8_t smu_rsd1;
|
||
uint8_t gpuclk_ss_mode; // enum of atom_spread_spectrum_mode
|
||
uint16_t sclk_ss_percentage;
|
||
uint16_t sclk_ss_rate_10hz;
|
||
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t gpuclk_ss_rate_10hz;
|
||
uint32_t core_refclk_10khz;
|
||
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
|
||
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
|
||
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
|
||
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
|
||
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
|
||
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
|
||
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
|
||
};
|
||
|
||
struct atom_smu_info_v3_2 {
|
||
struct atom_common_table_header table_header;
|
||
uint8_t smuip_min_ver;
|
||
uint8_t smuip_max_ver;
|
||
uint8_t smu_rsd1;
|
||
uint8_t gpuclk_ss_mode;
|
||
uint16_t sclk_ss_percentage;
|
||
uint16_t sclk_ss_rate_10hz;
|
||
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t gpuclk_ss_rate_10hz;
|
||
uint32_t core_refclk_10khz;
|
||
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
|
||
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
|
||
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
|
||
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
|
||
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
|
||
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
|
||
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
|
||
uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid
|
||
uint8_t pcc_gpio_polarity; // GPIO polarity for CTF
|
||
uint16_t smugoldenoffset;
|
||
uint32_t gpupll_vco_freq_10khz;
|
||
uint32_t bootup_smnclk_10khz;
|
||
uint32_t bootup_socclk_10khz;
|
||
uint32_t bootup_mp0clk_10khz;
|
||
uint32_t bootup_mp1clk_10khz;
|
||
uint32_t bootup_lclk_10khz;
|
||
uint32_t bootup_dcefclk_10khz;
|
||
uint32_t ctf_threshold_override_value;
|
||
uint32_t reserved[5];
|
||
};
|
||
|
||
struct atom_smu_info_v3_3 {
|
||
struct atom_common_table_header table_header;
|
||
uint8_t smuip_min_ver;
|
||
uint8_t smuip_max_ver;
|
||
uint8_t waflclk_ss_mode;
|
||
uint8_t gpuclk_ss_mode;
|
||
uint16_t sclk_ss_percentage;
|
||
uint16_t sclk_ss_rate_10hz;
|
||
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t gpuclk_ss_rate_10hz;
|
||
uint32_t core_refclk_10khz;
|
||
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
|
||
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
|
||
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
|
||
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
|
||
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
|
||
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
|
||
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
|
||
uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid
|
||
uint8_t pcc_gpio_polarity; // GPIO polarity for CTF
|
||
uint16_t smugoldenoffset;
|
||
uint32_t gpupll_vco_freq_10khz;
|
||
uint32_t bootup_smnclk_10khz;
|
||
uint32_t bootup_socclk_10khz;
|
||
uint32_t bootup_mp0clk_10khz;
|
||
uint32_t bootup_mp1clk_10khz;
|
||
uint32_t bootup_lclk_10khz;
|
||
uint32_t bootup_dcefclk_10khz;
|
||
uint32_t ctf_threshold_override_value;
|
||
uint32_t syspll3_0_vco_freq_10khz;
|
||
uint32_t syspll3_1_vco_freq_10khz;
|
||
uint32_t bootup_fclk_10khz;
|
||
uint32_t bootup_waflclk_10khz;
|
||
uint32_t smu_info_caps;
|
||
uint16_t waflclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t smuinitoffset;
|
||
uint32_t reserved;
|
||
};
|
||
|
||
struct atom_smu_info_v3_5
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t smuip_min_ver;
|
||
uint8_t smuip_max_ver;
|
||
uint8_t waflclk_ss_mode;
|
||
uint8_t gpuclk_ss_mode;
|
||
uint16_t sclk_ss_percentage;
|
||
uint16_t sclk_ss_rate_10hz;
|
||
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t gpuclk_ss_rate_10hz;
|
||
uint32_t core_refclk_10khz;
|
||
uint32_t syspll0_1_vco_freq_10khz;
|
||
uint32_t syspll0_2_vco_freq_10khz;
|
||
uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid
|
||
uint8_t pcc_gpio_polarity; // GPIO polarity for CTF
|
||
uint16_t smugoldenoffset;
|
||
uint32_t syspll0_0_vco_freq_10khz;
|
||
uint32_t bootup_smnclk_10khz;
|
||
uint32_t bootup_socclk_10khz;
|
||
uint32_t bootup_mp0clk_10khz;
|
||
uint32_t bootup_mp1clk_10khz;
|
||
uint32_t bootup_lclk_10khz;
|
||
uint32_t bootup_dcefclk_10khz;
|
||
uint32_t ctf_threshold_override_value;
|
||
uint32_t syspll3_0_vco_freq_10khz;
|
||
uint32_t syspll3_1_vco_freq_10khz;
|
||
uint32_t bootup_fclk_10khz;
|
||
uint32_t bootup_waflclk_10khz;
|
||
uint32_t smu_info_caps;
|
||
uint16_t waflclk_ss_percentage; // in unit of 0.001%
|
||
uint16_t smuinitoffset;
|
||
uint32_t bootup_dprefclk_10khz;
|
||
uint32_t bootup_usbclk_10khz;
|
||
uint32_t smb_slave_address;
|
||
uint32_t cg_fdo_ctrl0_val;
|
||
uint32_t cg_fdo_ctrl1_val;
|
||
uint32_t cg_fdo_ctrl2_val;
|
||
uint32_t gdfll_as_wait_ctrl_val;
|
||
uint32_t gdfll_as_step_ctrl_val;
|
||
uint32_t bootup_dtbclk_10khz;
|
||
uint32_t fclk_syspll_refclk_10khz;
|
||
uint32_t smusvi_svc0_val;
|
||
uint32_t smusvi_svc1_val;
|
||
uint32_t smusvi_svd0_val;
|
||
uint32_t smusvi_svd1_val;
|
||
uint32_t smusvi_svt0_val;
|
||
uint32_t smusvi_svt1_val;
|
||
uint32_t cg_tach_ctrl_val;
|
||
uint32_t cg_pump_ctrl1_val;
|
||
uint32_t cg_pump_tach_ctrl_val;
|
||
uint32_t thm_ctf_delay_val;
|
||
uint32_t thm_thermal_int_ctrl_val;
|
||
uint32_t thm_tmon_config_val;
|
||
uint32_t reserved[16];
|
||
};
|
||
|
||
struct atom_smu_info_v3_6
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t smuip_min_ver;
|
||
uint8_t smuip_max_ver;
|
||
uint8_t waflclk_ss_mode;
|
||
uint8_t gpuclk_ss_mode;
|
||
uint16_t sclk_ss_percentage;
|
||
uint16_t sclk_ss_rate_10hz;
|
||
uint16_t gpuclk_ss_percentage;
|
||
uint16_t gpuclk_ss_rate_10hz;
|
||
uint32_t core_refclk_10khz;
|
||
uint32_t syspll0_1_vco_freq_10khz;
|
||
uint32_t syspll0_2_vco_freq_10khz;
|
||
uint8_t pcc_gpio_bit;
|
||
uint8_t pcc_gpio_polarity;
|
||
uint16_t smugoldenoffset;
|
||
uint32_t syspll0_0_vco_freq_10khz;
|
||
uint32_t bootup_smnclk_10khz;
|
||
uint32_t bootup_socclk_10khz;
|
||
uint32_t bootup_mp0clk_10khz;
|
||
uint32_t bootup_mp1clk_10khz;
|
||
uint32_t bootup_lclk_10khz;
|
||
uint32_t bootup_dxioclk_10khz;
|
||
uint32_t ctf_threshold_override_value;
|
||
uint32_t syspll3_0_vco_freq_10khz;
|
||
uint32_t syspll3_1_vco_freq_10khz;
|
||
uint32_t bootup_fclk_10khz;
|
||
uint32_t bootup_waflclk_10khz;
|
||
uint32_t smu_info_caps;
|
||
uint16_t waflclk_ss_percentage;
|
||
uint16_t smuinitoffset;
|
||
uint32_t bootup_gfxavsclk_10khz;
|
||
uint32_t bootup_mpioclk_10khz;
|
||
uint32_t smb_slave_address;
|
||
uint32_t cg_fdo_ctrl0_val;
|
||
uint32_t cg_fdo_ctrl1_val;
|
||
uint32_t cg_fdo_ctrl2_val;
|
||
uint32_t gdfll_as_wait_ctrl_val;
|
||
uint32_t gdfll_as_step_ctrl_val;
|
||
uint32_t reserved_clk;
|
||
uint32_t fclk_syspll_refclk_10khz;
|
||
uint32_t smusvi_svc0_val;
|
||
uint32_t smusvi_svc1_val;
|
||
uint32_t smusvi_svd0_val;
|
||
uint32_t smusvi_svd1_val;
|
||
uint32_t smusvi_svt0_val;
|
||
uint32_t smusvi_svt1_val;
|
||
uint32_t cg_tach_ctrl_val;
|
||
uint32_t cg_pump_ctrl1_val;
|
||
uint32_t cg_pump_tach_ctrl_val;
|
||
uint32_t thm_ctf_delay_val;
|
||
uint32_t thm_thermal_int_ctrl_val;
|
||
uint32_t thm_tmon_config_val;
|
||
uint32_t bootup_vclk_10khz;
|
||
uint32_t bootup_dclk_10khz;
|
||
uint32_t smu_gpiopad_pu_en_val;
|
||
uint32_t smu_gpiopad_pd_en_val;
|
||
uint32_t reserved[12];
|
||
};
|
||
|
||
struct atom_smu_info_v4_0 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t bootup_gfxclk_bypass_10khz;
|
||
uint32_t bootup_usrclk_10khz;
|
||
uint32_t bootup_csrclk_10khz;
|
||
uint32_t core_refclk_10khz;
|
||
uint32_t syspll1_vco_freq_10khz;
|
||
uint32_t syspll2_vco_freq_10khz;
|
||
uint8_t pcc_gpio_bit;
|
||
uint8_t pcc_gpio_polarity;
|
||
uint16_t bootup_vddusr_mv;
|
||
uint32_t syspll0_vco_freq_10khz;
|
||
uint32_t bootup_smnclk_10khz;
|
||
uint32_t bootup_socclk_10khz;
|
||
uint32_t bootup_mp0clk_10khz;
|
||
uint32_t bootup_mp1clk_10khz;
|
||
uint32_t bootup_lclk_10khz;
|
||
uint32_t bootup_dcefclk_10khz;
|
||
uint32_t ctf_threshold_override_value;
|
||
uint32_t syspll3_vco_freq_10khz;
|
||
uint32_t mm_syspll_vco_freq_10khz;
|
||
uint32_t bootup_fclk_10khz;
|
||
uint32_t bootup_waflclk_10khz;
|
||
uint32_t smu_info_caps;
|
||
uint16_t waflclk_ss_percentage;
|
||
uint16_t smuinitoffset;
|
||
uint32_t bootup_dprefclk_10khz;
|
||
uint32_t bootup_usbclk_10khz;
|
||
uint32_t smb_slave_address;
|
||
uint32_t cg_fdo_ctrl0_val;
|
||
uint32_t cg_fdo_ctrl1_val;
|
||
uint32_t cg_fdo_ctrl2_val;
|
||
uint32_t gdfll_as_wait_ctrl_val;
|
||
uint32_t gdfll_as_step_ctrl_val;
|
||
uint32_t bootup_dtbclk_10khz;
|
||
uint32_t fclk_syspll_refclk_10khz;
|
||
uint32_t smusvi_svc0_val;
|
||
uint32_t smusvi_svc1_val;
|
||
uint32_t smusvi_svd0_val;
|
||
uint32_t smusvi_svd1_val;
|
||
uint32_t smusvi_svt0_val;
|
||
uint32_t smusvi_svt1_val;
|
||
uint32_t cg_tach_ctrl_val;
|
||
uint32_t cg_pump_ctrl1_val;
|
||
uint32_t cg_pump_tach_ctrl_val;
|
||
uint32_t thm_ctf_delay_val;
|
||
uint32_t thm_thermal_int_ctrl_val;
|
||
uint32_t thm_tmon_config_val;
|
||
uint32_t smbus_timing_cntrl0_val;
|
||
uint32_t smbus_timing_cntrl1_val;
|
||
uint32_t smbus_timing_cntrl2_val;
|
||
uint32_t pwr_disp_timer_global_control_val;
|
||
uint32_t bootup_mpioclk_10khz;
|
||
uint32_t bootup_dclk0_10khz;
|
||
uint32_t bootup_vclk0_10khz;
|
||
uint32_t bootup_dclk1_10khz;
|
||
uint32_t bootup_vclk1_10khz;
|
||
uint32_t bootup_baco400clk_10khz;
|
||
uint32_t bootup_baco1200clk_bypass_10khz;
|
||
uint32_t bootup_baco700clk_bypass_10khz;
|
||
uint32_t reserved[16];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table smc_dpm_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_smc_dpm_info_v4_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t liquid1_i2c_address;
|
||
uint8_t liquid2_i2c_address;
|
||
uint8_t vr_i2c_address;
|
||
uint8_t plx_i2c_address;
|
||
|
||
uint8_t liquid_i2c_linescl;
|
||
uint8_t liquid_i2c_linesda;
|
||
uint8_t vr_i2c_linescl;
|
||
uint8_t vr_i2c_linesda;
|
||
|
||
uint8_t plx_i2c_linescl;
|
||
uint8_t plx_i2c_linesda;
|
||
uint8_t vrsensorpresent;
|
||
uint8_t liquidsensorpresent;
|
||
|
||
uint16_t maxvoltagestepgfx;
|
||
uint16_t maxvoltagestepsoc;
|
||
|
||
uint8_t vddgfxvrmapping;
|
||
uint8_t vddsocvrmapping;
|
||
uint8_t vddmem0vrmapping;
|
||
uint8_t vddmem1vrmapping;
|
||
|
||
uint8_t gfxulvphasesheddingmask;
|
||
uint8_t soculvphasesheddingmask;
|
||
uint8_t padding8_v[2];
|
||
|
||
uint16_t gfxmaxcurrent;
|
||
uint8_t gfxoffset;
|
||
uint8_t padding_telemetrygfx;
|
||
|
||
uint16_t socmaxcurrent;
|
||
uint8_t socoffset;
|
||
uint8_t padding_telemetrysoc;
|
||
|
||
uint16_t mem0maxcurrent;
|
||
uint8_t mem0offset;
|
||
uint8_t padding_telemetrymem0;
|
||
|
||
uint16_t mem1maxcurrent;
|
||
uint8_t mem1offset;
|
||
uint8_t padding_telemetrymem1;
|
||
|
||
uint8_t acdcgpio;
|
||
uint8_t acdcpolarity;
|
||
uint8_t vr0hotgpio;
|
||
uint8_t vr0hotpolarity;
|
||
|
||
uint8_t vr1hotgpio;
|
||
uint8_t vr1hotpolarity;
|
||
uint8_t padding1;
|
||
uint8_t padding2;
|
||
|
||
uint8_t ledpin0;
|
||
uint8_t ledpin1;
|
||
uint8_t ledpin2;
|
||
uint8_t padding8_4;
|
||
|
||
uint8_t pllgfxclkspreadenabled;
|
||
uint8_t pllgfxclkspreadpercent;
|
||
uint16_t pllgfxclkspreadfreq;
|
||
|
||
uint8_t uclkspreadenabled;
|
||
uint8_t uclkspreadpercent;
|
||
uint16_t uclkspreadfreq;
|
||
|
||
uint8_t socclkspreadenabled;
|
||
uint8_t socclkspreadpercent;
|
||
uint16_t socclkspreadfreq;
|
||
|
||
uint8_t acggfxclkspreadenabled;
|
||
uint8_t acggfxclkspreadpercent;
|
||
uint16_t acggfxclkspreadfreq;
|
||
|
||
uint8_t Vr2_I2C_address;
|
||
uint8_t padding_vr2[3];
|
||
|
||
uint32_t boardreserved[9];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table smc_dpm_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_smc_dpm_info_v4_3
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t liquid1_i2c_address;
|
||
uint8_t liquid2_i2c_address;
|
||
uint8_t vr_i2c_address;
|
||
uint8_t plx_i2c_address;
|
||
|
||
uint8_t liquid_i2c_linescl;
|
||
uint8_t liquid_i2c_linesda;
|
||
uint8_t vr_i2c_linescl;
|
||
uint8_t vr_i2c_linesda;
|
||
|
||
uint8_t plx_i2c_linescl;
|
||
uint8_t plx_i2c_linesda;
|
||
uint8_t vrsensorpresent;
|
||
uint8_t liquidsensorpresent;
|
||
|
||
uint16_t maxvoltagestepgfx;
|
||
uint16_t maxvoltagestepsoc;
|
||
|
||
uint8_t vddgfxvrmapping;
|
||
uint8_t vddsocvrmapping;
|
||
uint8_t vddmem0vrmapping;
|
||
uint8_t vddmem1vrmapping;
|
||
|
||
uint8_t gfxulvphasesheddingmask;
|
||
uint8_t soculvphasesheddingmask;
|
||
uint8_t externalsensorpresent;
|
||
uint8_t padding8_v;
|
||
|
||
uint16_t gfxmaxcurrent;
|
||
uint8_t gfxoffset;
|
||
uint8_t padding_telemetrygfx;
|
||
|
||
uint16_t socmaxcurrent;
|
||
uint8_t socoffset;
|
||
uint8_t padding_telemetrysoc;
|
||
|
||
uint16_t mem0maxcurrent;
|
||
uint8_t mem0offset;
|
||
uint8_t padding_telemetrymem0;
|
||
|
||
uint16_t mem1maxcurrent;
|
||
uint8_t mem1offset;
|
||
uint8_t padding_telemetrymem1;
|
||
|
||
uint8_t acdcgpio;
|
||
uint8_t acdcpolarity;
|
||
uint8_t vr0hotgpio;
|
||
uint8_t vr0hotpolarity;
|
||
|
||
uint8_t vr1hotgpio;
|
||
uint8_t vr1hotpolarity;
|
||
uint8_t padding1;
|
||
uint8_t padding2;
|
||
|
||
uint8_t ledpin0;
|
||
uint8_t ledpin1;
|
||
uint8_t ledpin2;
|
||
uint8_t padding8_4;
|
||
|
||
uint8_t pllgfxclkspreadenabled;
|
||
uint8_t pllgfxclkspreadpercent;
|
||
uint16_t pllgfxclkspreadfreq;
|
||
|
||
uint8_t uclkspreadenabled;
|
||
uint8_t uclkspreadpercent;
|
||
uint16_t uclkspreadfreq;
|
||
|
||
uint8_t fclkspreadenabled;
|
||
uint8_t fclkspreadpercent;
|
||
uint16_t fclkspreadfreq;
|
||
|
||
uint8_t fllgfxclkspreadenabled;
|
||
uint8_t fllgfxclkspreadpercent;
|
||
uint16_t fllgfxclkspreadfreq;
|
||
|
||
uint32_t boardreserved[10];
|
||
};
|
||
|
||
struct smudpm_i2ccontrollerconfig_t {
|
||
uint32_t enabled;
|
||
uint32_t slaveaddress;
|
||
uint32_t controllerport;
|
||
uint32_t controllername;
|
||
uint32_t thermalthrottler;
|
||
uint32_t i2cprotocol;
|
||
uint32_t i2cspeed;
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_4
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t i2c_padding[3];
|
||
|
||
uint16_t maxvoltagestepgfx;
|
||
uint16_t maxvoltagestepsoc;
|
||
|
||
uint8_t vddgfxvrmapping;
|
||
uint8_t vddsocvrmapping;
|
||
uint8_t vddmem0vrmapping;
|
||
uint8_t vddmem1vrmapping;
|
||
|
||
uint8_t gfxulvphasesheddingmask;
|
||
uint8_t soculvphasesheddingmask;
|
||
uint8_t externalsensorpresent;
|
||
uint8_t padding8_v;
|
||
|
||
uint16_t gfxmaxcurrent;
|
||
uint8_t gfxoffset;
|
||
uint8_t padding_telemetrygfx;
|
||
|
||
uint16_t socmaxcurrent;
|
||
uint8_t socoffset;
|
||
uint8_t padding_telemetrysoc;
|
||
|
||
uint16_t mem0maxcurrent;
|
||
uint8_t mem0offset;
|
||
uint8_t padding_telemetrymem0;
|
||
|
||
uint16_t mem1maxcurrent;
|
||
uint8_t mem1offset;
|
||
uint8_t padding_telemetrymem1;
|
||
|
||
|
||
uint8_t acdcgpio;
|
||
uint8_t acdcpolarity;
|
||
uint8_t vr0hotgpio;
|
||
uint8_t vr0hotpolarity;
|
||
|
||
uint8_t vr1hotgpio;
|
||
uint8_t vr1hotpolarity;
|
||
uint8_t padding1;
|
||
uint8_t padding2;
|
||
|
||
|
||
uint8_t ledpin0;
|
||
uint8_t ledpin1;
|
||
uint8_t ledpin2;
|
||
uint8_t padding8_4;
|
||
|
||
|
||
uint8_t pllgfxclkspreadenabled;
|
||
uint8_t pllgfxclkspreadpercent;
|
||
uint16_t pllgfxclkspreadfreq;
|
||
|
||
|
||
uint8_t uclkspreadenabled;
|
||
uint8_t uclkspreadpercent;
|
||
uint16_t uclkspreadfreq;
|
||
|
||
|
||
uint8_t fclkspreadenabled;
|
||
uint8_t fclkspreadpercent;
|
||
uint16_t fclkspreadfreq;
|
||
|
||
|
||
uint8_t fllgfxclkspreadenabled;
|
||
uint8_t fllgfxclkspreadpercent;
|
||
uint16_t fllgfxclkspreadfreq;
|
||
|
||
|
||
struct smudpm_i2ccontrollerconfig_t i2ccontrollers[7];
|
||
|
||
|
||
uint32_t boardreserved[10];
|
||
};
|
||
|
||
enum smudpm_v4_5_i2ccontrollername_e{
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_VR_GFX = 0,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_VR_SOC,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_VR_VDDCI,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_VR_MVDD,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID0,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID1,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_PLX,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_SPARE,
|
||
SMC_V4_5_I2C_CONTROLLER_NAME_COUNT,
|
||
};
|
||
|
||
enum smudpm_v4_5_i2ccontrollerthrottler_e{
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_GFX,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_SOC,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_VDDCI,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_MVDD,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID0,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID1,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_PLX,
|
||
SMC_V4_5_I2C_CONTROLLER_THROTTLER_COUNT,
|
||
};
|
||
|
||
enum smudpm_v4_5_i2ccontrollerprotocol_e{
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_0,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_1,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_0,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_1,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_0,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_1,
|
||
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_COUNT,
|
||
};
|
||
|
||
struct smudpm_i2c_controller_config_v2
|
||
{
|
||
uint8_t Enabled;
|
||
uint8_t Speed;
|
||
uint8_t Padding[2];
|
||
uint32_t SlaveAddress;
|
||
uint8_t ControllerPort;
|
||
uint8_t ControllerName;
|
||
uint8_t ThermalThrotter;
|
||
uint8_t I2cProtocol;
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_5
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
// SECTION: BOARD PARAMETERS
|
||
// I2C Control
|
||
struct smudpm_i2c_controller_config_v2 I2cControllers[8];
|
||
|
||
// SVI2 Board Parameters
|
||
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
||
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
||
|
||
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
|
||
|
||
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
|
||
uint8_t Padding8_V;
|
||
|
||
// Telemetry Settings
|
||
uint16_t GfxMaxCurrent; // in Amps
|
||
uint8_t GfxOffset; // in Amps
|
||
uint8_t Padding_TelemetryGfx;
|
||
uint16_t SocMaxCurrent; // in Amps
|
||
uint8_t SocOffset; // in Amps
|
||
uint8_t Padding_TelemetrySoc;
|
||
|
||
uint16_t Mem0MaxCurrent; // in Amps
|
||
uint8_t Mem0Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem0;
|
||
|
||
uint16_t Mem1MaxCurrent; // in Amps
|
||
uint8_t Mem1Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem1;
|
||
|
||
// GPIO Settings
|
||
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
|
||
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
|
||
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
|
||
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
|
||
|
||
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
|
||
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
|
||
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
|
||
|
||
// LED Display Settings
|
||
uint8_t LedPin0; // GPIO number for LedPin[0]
|
||
uint8_t LedPin1; // GPIO number for LedPin[1]
|
||
uint8_t LedPin2; // GPIO number for LedPin[2]
|
||
uint8_t padding8_4;
|
||
|
||
// GFXCLK PLL Spread Spectrum
|
||
uint8_t PllGfxclkSpreadEnabled; // on or off
|
||
uint8_t PllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t PllGfxclkSpreadFreq; // kHz
|
||
|
||
// GFXCLK DFLL Spread Spectrum
|
||
uint8_t DfllGfxclkSpreadEnabled; // on or off
|
||
uint8_t DfllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t DfllGfxclkSpreadFreq; // kHz
|
||
|
||
// UCLK Spread Spectrum
|
||
uint8_t UclkSpreadEnabled; // on or off
|
||
uint8_t UclkSpreadPercent; // Q4.4
|
||
uint16_t UclkSpreadFreq; // kHz
|
||
|
||
// SOCCLK Spread Spectrum
|
||
uint8_t SoclkSpreadEnabled; // on or off
|
||
uint8_t SocclkSpreadPercent; // Q4.4
|
||
uint16_t SocclkSpreadFreq; // kHz
|
||
|
||
// Total board power
|
||
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
|
||
uint16_t BoardPadding;
|
||
|
||
// Mvdd Svi2 Div Ratio Setting
|
||
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
|
||
|
||
uint32_t BoardReserved[9];
|
||
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_6
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
// section: board parameters
|
||
uint32_t i2c_padding[3]; // old i2c control are moved to new area
|
||
|
||
uint16_t maxvoltagestepgfx; // in mv(q2) max voltage step that smu will request. multiple steps are taken if voltage change exceeds this value.
|
||
uint16_t maxvoltagestepsoc; // in mv(q2) max voltage step that smu will request. multiple steps are taken if voltage change exceeds this value.
|
||
|
||
uint8_t vddgfxvrmapping; // use vr_mapping* bitfields
|
||
uint8_t vddsocvrmapping; // use vr_mapping* bitfields
|
||
uint8_t vddmemvrmapping; // use vr_mapping* bitfields
|
||
uint8_t boardvrmapping; // use vr_mapping* bitfields
|
||
|
||
uint8_t gfxulvphasesheddingmask; // set this to 1 to set psi0/1 to 1 in ulv mode
|
||
uint8_t externalsensorpresent; // external rdi connected to tmon (aka temp in)
|
||
uint8_t padding8_v[2];
|
||
|
||
// telemetry settings
|
||
uint16_t gfxmaxcurrent; // in amps
|
||
uint8_t gfxoffset; // in amps
|
||
uint8_t padding_telemetrygfx;
|
||
|
||
uint16_t socmaxcurrent; // in amps
|
||
uint8_t socoffset; // in amps
|
||
uint8_t padding_telemetrysoc;
|
||
|
||
uint16_t memmaxcurrent; // in amps
|
||
uint8_t memoffset; // in amps
|
||
uint8_t padding_telemetrymem;
|
||
|
||
uint16_t boardmaxcurrent; // in amps
|
||
uint8_t boardoffset; // in amps
|
||
uint8_t padding_telemetryboardinput;
|
||
|
||
// gpio settings
|
||
uint8_t vr0hotgpio; // gpio pin configured for vr0 hot event
|
||
uint8_t vr0hotpolarity; // gpio polarity for vr0 hot event
|
||
uint8_t vr1hotgpio; // gpio pin configured for vr1 hot event
|
||
uint8_t vr1hotpolarity; // gpio polarity for vr1 hot event
|
||
|
||
// gfxclk pll spread spectrum
|
||
uint8_t pllgfxclkspreadenabled; // on or off
|
||
uint8_t pllgfxclkspreadpercent; // q4.4
|
||
uint16_t pllgfxclkspreadfreq; // khz
|
||
|
||
// uclk spread spectrum
|
||
uint8_t uclkspreadenabled; // on or off
|
||
uint8_t uclkspreadpercent; // q4.4
|
||
uint16_t uclkspreadfreq; // khz
|
||
|
||
// fclk spread spectrum
|
||
uint8_t fclkspreadenabled; // on or off
|
||
uint8_t fclkspreadpercent; // q4.4
|
||
uint16_t fclkspreadfreq; // khz
|
||
|
||
|
||
// gfxclk fll spread spectrum
|
||
uint8_t fllgfxclkspreadenabled; // on or off
|
||
uint8_t fllgfxclkspreadpercent; // q4.4
|
||
uint16_t fllgfxclkspreadfreq; // khz
|
||
|
||
// i2c controller structure
|
||
struct smudpm_i2c_controller_config_v2 i2ccontrollers[8];
|
||
|
||
// memory section
|
||
uint32_t memorychannelenabled; // for dram use only, max 32 channels enabled bit mask.
|
||
|
||
uint8_t drambitwidth; // for dram use only. see dram bit width type defines
|
||
uint8_t paddingmem[3];
|
||
|
||
// total board power
|
||
uint16_t totalboardpower; //only needed for tcp estimated case, where tcp = tgp+total board power
|
||
uint16_t boardpadding;
|
||
|
||
// section: xgmi training
|
||
uint8_t xgmilinkspeed[4];
|
||
uint8_t xgmilinkwidth[4];
|
||
|
||
uint16_t xgmifclkfreq[4];
|
||
uint16_t xgmisocvoltage[4];
|
||
|
||
// reserved
|
||
uint32_t boardreserved[10];
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_7
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
// SECTION: BOARD PARAMETERS
|
||
// I2C Control
|
||
struct smudpm_i2c_controller_config_v2 I2cControllers[8];
|
||
|
||
// SVI2 Board Parameters
|
||
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
||
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
|
||
|
||
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
|
||
|
||
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
|
||
uint8_t Padding8_V;
|
||
|
||
// Telemetry Settings
|
||
uint16_t GfxMaxCurrent; // in Amps
|
||
uint8_t GfxOffset; // in Amps
|
||
uint8_t Padding_TelemetryGfx;
|
||
uint16_t SocMaxCurrent; // in Amps
|
||
uint8_t SocOffset; // in Amps
|
||
uint8_t Padding_TelemetrySoc;
|
||
|
||
uint16_t Mem0MaxCurrent; // in Amps
|
||
uint8_t Mem0Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem0;
|
||
|
||
uint16_t Mem1MaxCurrent; // in Amps
|
||
uint8_t Mem1Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem1;
|
||
|
||
// GPIO Settings
|
||
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
|
||
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
|
||
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
|
||
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
|
||
|
||
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
|
||
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
|
||
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
|
||
|
||
// LED Display Settings
|
||
uint8_t LedPin0; // GPIO number for LedPin[0]
|
||
uint8_t LedPin1; // GPIO number for LedPin[1]
|
||
uint8_t LedPin2; // GPIO number for LedPin[2]
|
||
uint8_t padding8_4;
|
||
|
||
// GFXCLK PLL Spread Spectrum
|
||
uint8_t PllGfxclkSpreadEnabled; // on or off
|
||
uint8_t PllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t PllGfxclkSpreadFreq; // kHz
|
||
|
||
// GFXCLK DFLL Spread Spectrum
|
||
uint8_t DfllGfxclkSpreadEnabled; // on or off
|
||
uint8_t DfllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t DfllGfxclkSpreadFreq; // kHz
|
||
|
||
// UCLK Spread Spectrum
|
||
uint8_t UclkSpreadEnabled; // on or off
|
||
uint8_t UclkSpreadPercent; // Q4.4
|
||
uint16_t UclkSpreadFreq; // kHz
|
||
|
||
// SOCCLK Spread Spectrum
|
||
uint8_t SoclkSpreadEnabled; // on or off
|
||
uint8_t SocclkSpreadPercent; // Q4.4
|
||
uint16_t SocclkSpreadFreq; // kHz
|
||
|
||
// Total board power
|
||
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
|
||
uint16_t BoardPadding;
|
||
|
||
// Mvdd Svi2 Div Ratio Setting
|
||
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
|
||
|
||
// GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
|
||
uint8_t GpioI2cScl; // Serial Clock
|
||
uint8_t GpioI2cSda; // Serial Data
|
||
uint16_t GpioPadding;
|
||
|
||
// Additional LED Display Settings
|
||
uint8_t LedPin3; // GPIO number for LedPin[3] - PCIE GEN Speed
|
||
uint8_t LedPin4; // GPIO number for LedPin[4] - PMFW Error Status
|
||
uint16_t LedEnableMask;
|
||
|
||
// Power Limit Scalars
|
||
uint8_t PowerLimitScalar[4]; //[PPT_THROTTLER_COUNT]
|
||
|
||
uint8_t MvddUlvPhaseSheddingMask;
|
||
uint8_t VddciUlvPhaseSheddingMask;
|
||
uint8_t Padding8_Psi1;
|
||
uint8_t Padding8_Psi2;
|
||
|
||
uint32_t BoardReserved[5];
|
||
};
|
||
|
||
struct smudpm_i2c_controller_config_v3
|
||
{
|
||
uint8_t Enabled;
|
||
uint8_t Speed;
|
||
uint8_t SlaveAddress;
|
||
uint8_t ControllerPort;
|
||
uint8_t ControllerName;
|
||
uint8_t ThermalThrotter;
|
||
uint8_t I2cProtocol;
|
||
uint8_t PaddingConfig;
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_9
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
|
||
//SECTION: Gaming Clocks
|
||
//uint32_t GamingClk[6];
|
||
|
||
// SECTION: I2C Control
|
||
struct smudpm_i2c_controller_config_v3 I2cControllers[16];
|
||
|
||
uint8_t GpioScl; // GPIO Number for SCL Line, used only for CKSVII2C1
|
||
uint8_t GpioSda; // GPIO Number for SDA Line, used only for CKSVII2C1
|
||
uint8_t FchUsbPdSlaveAddr; //For requesting USB PD controller S-states via FCH I2C when entering PME turn off
|
||
uint8_t I2cSpare;
|
||
|
||
// SECTION: SVI2 Board Parameters
|
||
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
|
||
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
|
||
|
||
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t VddciUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
uint8_t MvddUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
|
||
|
||
// SECTION: Telemetry Settings
|
||
uint16_t GfxMaxCurrent; // in Amps
|
||
uint8_t GfxOffset; // in Amps
|
||
uint8_t Padding_TelemetryGfx;
|
||
|
||
uint16_t SocMaxCurrent; // in Amps
|
||
uint8_t SocOffset; // in Amps
|
||
uint8_t Padding_TelemetrySoc;
|
||
|
||
uint16_t Mem0MaxCurrent; // in Amps
|
||
uint8_t Mem0Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem0;
|
||
|
||
uint16_t Mem1MaxCurrent; // in Amps
|
||
uint8_t Mem1Offset; // in Amps
|
||
uint8_t Padding_TelemetryMem1;
|
||
|
||
uint32_t MvddRatio; // This is used for MVDD Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16)
|
||
|
||
// SECTION: GPIO Settings
|
||
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
|
||
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
|
||
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
|
||
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
|
||
|
||
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
|
||
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
|
||
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
|
||
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
|
||
|
||
// LED Display Settings
|
||
uint8_t LedPin0; // GPIO number for LedPin[0]
|
||
uint8_t LedPin1; // GPIO number for LedPin[1]
|
||
uint8_t LedPin2; // GPIO number for LedPin[2]
|
||
uint8_t LedEnableMask;
|
||
|
||
uint8_t LedPcie; // GPIO number for PCIE results
|
||
uint8_t LedError; // GPIO number for Error Cases
|
||
uint8_t LedSpare1[2];
|
||
|
||
// SECTION: Clock Spread Spectrum
|
||
|
||
// GFXCLK PLL Spread Spectrum
|
||
uint8_t PllGfxclkSpreadEnabled; // on or off
|
||
uint8_t PllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t PllGfxclkSpreadFreq; // kHz
|
||
|
||
// GFXCLK DFLL Spread Spectrum
|
||
uint8_t DfllGfxclkSpreadEnabled; // on or off
|
||
uint8_t DfllGfxclkSpreadPercent; // Q4.4
|
||
uint16_t DfllGfxclkSpreadFreq; // kHz
|
||
|
||
// UCLK Spread Spectrum
|
||
uint8_t UclkSpreadEnabled; // on or off
|
||
uint8_t UclkSpreadPercent; // Q4.4
|
||
uint16_t UclkSpreadFreq; // kHz
|
||
|
||
// FCLK Spread Spectrum
|
||
uint8_t FclkSpreadEnabled; // on or off
|
||
uint8_t FclkSpreadPercent; // Q4.4
|
||
uint16_t FclkSpreadFreq; // kHz
|
||
|
||
// Section: Memory Config
|
||
uint32_t MemoryChannelEnabled; // For DRAM use only, Max 32 channels enabled bit mask.
|
||
|
||
uint8_t DramBitWidth; // For DRAM use only. See Dram Bit width type defines
|
||
uint8_t PaddingMem1[3];
|
||
|
||
// Section: Total Board Power
|
||
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
|
||
uint16_t BoardPowerPadding;
|
||
|
||
// SECTION: XGMI Training
|
||
uint8_t XgmiLinkSpeed [4];
|
||
uint8_t XgmiLinkWidth [4];
|
||
|
||
uint16_t XgmiFclkFreq [4];
|
||
uint16_t XgmiSocVoltage [4];
|
||
|
||
// SECTION: Board Reserved
|
||
|
||
uint32_t BoardReserved[16];
|
||
|
||
};
|
||
|
||
struct atom_smc_dpm_info_v4_10
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
|
||
// SECTION: BOARD PARAMETERS
|
||
// Telemetry Settings
|
||
uint16_t GfxMaxCurrent; // in Amps
|
||
uint8_t GfxOffset; // in Amps
|
||
uint8_t Padding_TelemetryGfx;
|
||
|
||
uint16_t SocMaxCurrent; // in Amps
|
||
uint8_t SocOffset; // in Amps
|
||
uint8_t Padding_TelemetrySoc;
|
||
|
||
uint16_t MemMaxCurrent; // in Amps
|
||
uint8_t MemOffset; // in Amps
|
||
uint8_t Padding_TelemetryMem;
|
||
|
||
uint16_t BoardMaxCurrent; // in Amps
|
||
uint8_t BoardOffset; // in Amps
|
||
uint8_t Padding_TelemetryBoardInput;
|
||
|
||
// Platform input telemetry voltage coefficient
|
||
uint32_t BoardVoltageCoeffA; // decode by /1000
|
||
uint32_t BoardVoltageCoeffB; // decode by /1000
|
||
|
||
// GPIO Settings
|
||
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
|
||
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
|
||
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
|
||
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
|
||
|
||
// UCLK Spread Spectrum
|
||
uint8_t UclkSpreadEnabled; // on or off
|
||
uint8_t UclkSpreadPercent; // Q4.4
|
||
uint16_t UclkSpreadFreq; // kHz
|
||
|
||
// FCLK Spread Spectrum
|
||
uint8_t FclkSpreadEnabled; // on or off
|
||
uint8_t FclkSpreadPercent; // Q4.4
|
||
uint16_t FclkSpreadFreq; // kHz
|
||
|
||
// I2C Controller Structure
|
||
struct smudpm_i2c_controller_config_v3 I2cControllers[8];
|
||
|
||
// GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
|
||
uint8_t GpioI2cScl; // Serial Clock
|
||
uint8_t GpioI2cSda; // Serial Data
|
||
uint16_t spare5;
|
||
|
||
uint32_t reserved[16];
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table asic_profiling_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_asic_profiling_info_v4_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t maxvddc;
|
||
uint32_t minvddc;
|
||
uint32_t avfs_meannsigma_acontant0;
|
||
uint32_t avfs_meannsigma_acontant1;
|
||
uint32_t avfs_meannsigma_acontant2;
|
||
uint16_t avfs_meannsigma_dc_tol_sigma;
|
||
uint16_t avfs_meannsigma_platform_mean;
|
||
uint16_t avfs_meannsigma_platform_sigma;
|
||
uint32_t gb_vdroop_table_cksoff_a0;
|
||
uint32_t gb_vdroop_table_cksoff_a1;
|
||
uint32_t gb_vdroop_table_cksoff_a2;
|
||
uint32_t gb_vdroop_table_ckson_a0;
|
||
uint32_t gb_vdroop_table_ckson_a1;
|
||
uint32_t gb_vdroop_table_ckson_a2;
|
||
uint32_t avfsgb_fuse_table_cksoff_m1;
|
||
uint32_t avfsgb_fuse_table_cksoff_m2;
|
||
uint32_t avfsgb_fuse_table_cksoff_b;
|
||
uint32_t avfsgb_fuse_table_ckson_m1;
|
||
uint32_t avfsgb_fuse_table_ckson_m2;
|
||
uint32_t avfsgb_fuse_table_ckson_b;
|
||
uint16_t max_voltage_0_25mv;
|
||
uint8_t enable_gb_vdroop_table_cksoff;
|
||
uint8_t enable_gb_vdroop_table_ckson;
|
||
uint8_t enable_gb_fuse_table_cksoff;
|
||
uint8_t enable_gb_fuse_table_ckson;
|
||
uint16_t psm_age_comfactor;
|
||
uint8_t enable_apply_avfs_cksoff_voltage;
|
||
uint8_t reserved;
|
||
uint32_t dispclk2gfxclk_a;
|
||
uint32_t dispclk2gfxclk_b;
|
||
uint32_t dispclk2gfxclk_c;
|
||
uint32_t pixclk2gfxclk_a;
|
||
uint32_t pixclk2gfxclk_b;
|
||
uint32_t pixclk2gfxclk_c;
|
||
uint32_t dcefclk2gfxclk_a;
|
||
uint32_t dcefclk2gfxclk_b;
|
||
uint32_t dcefclk2gfxclk_c;
|
||
uint32_t phyclk2gfxclk_a;
|
||
uint32_t phyclk2gfxclk_b;
|
||
uint32_t phyclk2gfxclk_c;
|
||
};
|
||
|
||
struct atom_asic_profiling_info_v4_2 {
|
||
struct atom_common_table_header table_header;
|
||
uint32_t maxvddc;
|
||
uint32_t minvddc;
|
||
uint32_t avfs_meannsigma_acontant0;
|
||
uint32_t avfs_meannsigma_acontant1;
|
||
uint32_t avfs_meannsigma_acontant2;
|
||
uint16_t avfs_meannsigma_dc_tol_sigma;
|
||
uint16_t avfs_meannsigma_platform_mean;
|
||
uint16_t avfs_meannsigma_platform_sigma;
|
||
uint32_t gb_vdroop_table_cksoff_a0;
|
||
uint32_t gb_vdroop_table_cksoff_a1;
|
||
uint32_t gb_vdroop_table_cksoff_a2;
|
||
uint32_t gb_vdroop_table_ckson_a0;
|
||
uint32_t gb_vdroop_table_ckson_a1;
|
||
uint32_t gb_vdroop_table_ckson_a2;
|
||
uint32_t avfsgb_fuse_table_cksoff_m1;
|
||
uint32_t avfsgb_fuse_table_cksoff_m2;
|
||
uint32_t avfsgb_fuse_table_cksoff_b;
|
||
uint32_t avfsgb_fuse_table_ckson_m1;
|
||
uint32_t avfsgb_fuse_table_ckson_m2;
|
||
uint32_t avfsgb_fuse_table_ckson_b;
|
||
uint16_t max_voltage_0_25mv;
|
||
uint8_t enable_gb_vdroop_table_cksoff;
|
||
uint8_t enable_gb_vdroop_table_ckson;
|
||
uint8_t enable_gb_fuse_table_cksoff;
|
||
uint8_t enable_gb_fuse_table_ckson;
|
||
uint16_t psm_age_comfactor;
|
||
uint8_t enable_apply_avfs_cksoff_voltage;
|
||
uint8_t reserved;
|
||
uint32_t dispclk2gfxclk_a;
|
||
uint32_t dispclk2gfxclk_b;
|
||
uint32_t dispclk2gfxclk_c;
|
||
uint32_t pixclk2gfxclk_a;
|
||
uint32_t pixclk2gfxclk_b;
|
||
uint32_t pixclk2gfxclk_c;
|
||
uint32_t dcefclk2gfxclk_a;
|
||
uint32_t dcefclk2gfxclk_b;
|
||
uint32_t dcefclk2gfxclk_c;
|
||
uint32_t phyclk2gfxclk_a;
|
||
uint32_t phyclk2gfxclk_b;
|
||
uint32_t phyclk2gfxclk_c;
|
||
uint32_t acg_gb_vdroop_table_a0;
|
||
uint32_t acg_gb_vdroop_table_a1;
|
||
uint32_t acg_gb_vdroop_table_a2;
|
||
uint32_t acg_avfsgb_fuse_table_m1;
|
||
uint32_t acg_avfsgb_fuse_table_m2;
|
||
uint32_t acg_avfsgb_fuse_table_b;
|
||
uint8_t enable_acg_gb_vdroop_table;
|
||
uint8_t enable_acg_gb_fuse_table;
|
||
uint32_t acg_dispclk2gfxclk_a;
|
||
uint32_t acg_dispclk2gfxclk_b;
|
||
uint32_t acg_dispclk2gfxclk_c;
|
||
uint32_t acg_pixclk2gfxclk_a;
|
||
uint32_t acg_pixclk2gfxclk_b;
|
||
uint32_t acg_pixclk2gfxclk_c;
|
||
uint32_t acg_dcefclk2gfxclk_a;
|
||
uint32_t acg_dcefclk2gfxclk_b;
|
||
uint32_t acg_dcefclk2gfxclk_c;
|
||
uint32_t acg_phyclk2gfxclk_a;
|
||
uint32_t acg_phyclk2gfxclk_b;
|
||
uint32_t acg_phyclk2gfxclk_c;
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table multimedia_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_multimedia_info_v2_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint8_t uvdip_min_ver;
|
||
uint8_t uvdip_max_ver;
|
||
uint8_t vceip_min_ver;
|
||
uint8_t vceip_max_ver;
|
||
uint16_t uvd_enc_max_input_width_pixels;
|
||
uint16_t uvd_enc_max_input_height_pixels;
|
||
uint16_t vce_enc_max_input_width_pixels;
|
||
uint16_t vce_enc_max_input_height_pixels;
|
||
uint32_t uvd_enc_max_bandwidth; // 16x16 pixels/sec, codec independent
|
||
uint32_t vce_enc_max_bandwidth; // 16x16 pixels/sec, codec independent
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table umc_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_umc_info_v3_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t ucode_version;
|
||
uint32_t ucode_rom_startaddr;
|
||
uint32_t ucode_length;
|
||
uint16_t umc_reg_init_offset;
|
||
uint16_t customer_ucode_name_offset;
|
||
uint16_t mclk_ss_percentage;
|
||
uint16_t mclk_ss_rate_10hz;
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t vram_type; //enum of atom_dgpu_vram_type
|
||
uint8_t umc_config;
|
||
uint32_t mem_refclk_10khz;
|
||
};
|
||
|
||
// umc_info.umc_config
|
||
enum atom_umc_config_def {
|
||
UMC_CONFIG__ENABLE_1KB_INTERLEAVE_MODE = 0x00000001,
|
||
UMC_CONFIG__DEFAULT_MEM_ECC_ENABLE = 0x00000002,
|
||
UMC_CONFIG__ENABLE_HBM_LANE_REPAIR = 0x00000004,
|
||
UMC_CONFIG__ENABLE_BANK_HARVESTING = 0x00000008,
|
||
UMC_CONFIG__ENABLE_PHY_REINIT = 0x00000010,
|
||
UMC_CONFIG__DISABLE_UCODE_CHKSTATUS = 0x00000020,
|
||
};
|
||
|
||
struct atom_umc_info_v3_2
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t ucode_version;
|
||
uint32_t ucode_rom_startaddr;
|
||
uint32_t ucode_length;
|
||
uint16_t umc_reg_init_offset;
|
||
uint16_t customer_ucode_name_offset;
|
||
uint16_t mclk_ss_percentage;
|
||
uint16_t mclk_ss_rate_10hz;
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t vram_type; //enum of atom_dgpu_vram_type
|
||
uint8_t umc_config;
|
||
uint32_t mem_refclk_10khz;
|
||
uint32_t pstate_uclk_10khz[4];
|
||
uint16_t umcgoldenoffset;
|
||
uint16_t densitygoldenoffset;
|
||
};
|
||
|
||
struct atom_umc_info_v3_3
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
uint32_t ucode_reserved;
|
||
uint32_t ucode_rom_startaddr;
|
||
uint32_t ucode_length;
|
||
uint16_t umc_reg_init_offset;
|
||
uint16_t customer_ucode_name_offset;
|
||
uint16_t mclk_ss_percentage;
|
||
uint16_t mclk_ss_rate_10hz;
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t vram_type; //enum of atom_dgpu_vram_type
|
||
uint8_t umc_config;
|
||
uint32_t mem_refclk_10khz;
|
||
uint32_t pstate_uclk_10khz[4];
|
||
uint16_t umcgoldenoffset;
|
||
uint16_t densitygoldenoffset;
|
||
uint32_t umc_config1;
|
||
uint32_t bist_data_startaddr;
|
||
uint32_t reserved[2];
|
||
};
|
||
|
||
enum atom_umc_config1_def {
|
||
UMC_CONFIG1__ENABLE_PSTATE_PHASE_STORE_TRAIN = 0x00000001,
|
||
UMC_CONFIG1__ENABLE_AUTO_FRAMING = 0x00000002,
|
||
UMC_CONFIG1__ENABLE_RESTORE_BIST_DATA = 0x00000004,
|
||
UMC_CONFIG1__DISABLE_STROBE_MODE = 0x00000008,
|
||
UMC_CONFIG1__DEBUG_DATA_PARITY_EN = 0x00000010,
|
||
UMC_CONFIG1__ENABLE_ECC_CAPABLE = 0x00010000,
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table vram_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_vram_module_v9 {
|
||
// Design Specific Values
|
||
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
|
||
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
|
||
uint32_t max_mem_clk; // max memory clock of this memory in unit of 10kHz, =0 means it is not defined
|
||
uint16_t reserved[3];
|
||
uint16_t mem_voltage; // mem_voltage
|
||
uint16_t vram_module_size; // Size of atom_vram_module_v9
|
||
uint8_t ext_memory_id; // Current memory module ID
|
||
uint8_t memory_type; // enum of atom_dgpu_vram_type
|
||
uint8_t channel_num; // Number of mem. channels supported in this module
|
||
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
|
||
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
|
||
uint8_t tunningset_id; // MC phy registers set per.
|
||
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
|
||
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
|
||
uint8_t hbm_ven_rev_id; // hbm_ven_rev_id
|
||
uint8_t vram_rsd2; // reserved
|
||
char dram_pnstring[20]; // part number end with '0'.
|
||
};
|
||
|
||
struct atom_vram_info_header_v2_3 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
|
||
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
|
||
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
|
||
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
|
||
uint16_t dram_data_remap_tbloffset; // reserved for now
|
||
uint16_t tmrs_seq_offset; // offset of HBM tmrs
|
||
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
|
||
uint16_t vram_rsd2;
|
||
uint8_t vram_module_num; // indicate number of VRAM module
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
|
||
struct atom_vram_module_v9 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Data Table vram_info v3.0 structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_vram_module_v3_0 {
|
||
uint8_t density;
|
||
uint8_t tunningset_id;
|
||
uint8_t ext_memory_id;
|
||
uint8_t dram_vendor_id;
|
||
uint16_t dram_info_offset;
|
||
uint16_t mem_tuning_offset;
|
||
uint16_t tmrs_seq_offset;
|
||
uint16_t reserved1;
|
||
uint32_t dram_size_per_ch;
|
||
uint32_t reserved[3];
|
||
char dram_pnstring[40];
|
||
};
|
||
|
||
struct atom_vram_info_header_v3_0 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t mem_tuning_table_offset;
|
||
uint16_t dram_info_table_offset;
|
||
uint16_t tmrs_table_offset;
|
||
uint16_t mc_init_table_offset;
|
||
uint16_t dram_data_remap_table_offset;
|
||
uint16_t umc_emuinittable_offset;
|
||
uint16_t reserved_sub_table_offset[2];
|
||
uint8_t vram_module_num;
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t mc_phy_tile_num;
|
||
uint8_t memory_type;
|
||
uint8_t channel_num;
|
||
uint8_t channel_width;
|
||
uint8_t reserved1;
|
||
uint32_t channel_enable;
|
||
uint32_t channel1_enable;
|
||
uint32_t feature_enable;
|
||
uint32_t feature1_enable;
|
||
uint32_t hardcode_mem_size;
|
||
uint32_t reserved4[4];
|
||
struct atom_vram_module_v3_0 vram_module[8];
|
||
};
|
||
|
||
struct atom_umc_register_addr_info{
|
||
uint32_t umc_register_addr:24;
|
||
uint32_t umc_reg_type_ind:1;
|
||
uint32_t umc_reg_rsvd:7;
|
||
};
|
||
|
||
//atom_umc_register_addr_info.
|
||
enum atom_umc_register_addr_info_flag{
|
||
b3ATOM_UMC_REG_ADD_INFO_INDIRECT_ACCESS =0x01,
|
||
};
|
||
|
||
union atom_umc_register_addr_info_access
|
||
{
|
||
struct atom_umc_register_addr_info umc_reg_addr;
|
||
uint32_t u32umc_reg_addr;
|
||
};
|
||
|
||
struct atom_umc_reg_setting_id_config{
|
||
uint32_t memclockrange:24;
|
||
uint32_t mem_blk_id:8;
|
||
};
|
||
|
||
union atom_umc_reg_setting_id_config_access
|
||
{
|
||
struct atom_umc_reg_setting_id_config umc_id_access;
|
||
uint32_t u32umc_id_access;
|
||
};
|
||
|
||
struct atom_umc_reg_setting_data_block{
|
||
union atom_umc_reg_setting_id_config_access block_id;
|
||
uint32_t u32umc_reg_data[1];
|
||
};
|
||
|
||
struct atom_umc_init_reg_block{
|
||
uint16_t umc_reg_num;
|
||
uint16_t reserved;
|
||
union atom_umc_register_addr_info_access umc_reg_list[1]; //for allocation purpose, the real number come from umc_reg_num;
|
||
struct atom_umc_reg_setting_data_block umc_reg_setting_list[1];
|
||
};
|
||
|
||
struct atom_vram_module_v10 {
|
||
// Design Specific Values
|
||
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
|
||
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
|
||
uint32_t max_mem_clk; // max memory clock of this memory in unit of 10kHz, =0 means it is not defined
|
||
uint16_t reserved[3];
|
||
uint16_t mem_voltage; // mem_voltage
|
||
uint16_t vram_module_size; // Size of atom_vram_module_v9
|
||
uint8_t ext_memory_id; // Current memory module ID
|
||
uint8_t memory_type; // enum of atom_dgpu_vram_type
|
||
uint8_t channel_num; // Number of mem. channels supported in this module
|
||
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
|
||
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
|
||
uint8_t tunningset_id; // MC phy registers set per
|
||
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
|
||
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
|
||
uint8_t vram_flags; // bit0= bankgroup enable
|
||
uint8_t vram_rsd2; // reserved
|
||
uint16_t gddr6_mr10; // gddr6 mode register10 value
|
||
uint16_t gddr6_mr1; // gddr6 mode register1 value
|
||
uint16_t gddr6_mr2; // gddr6 mode register2 value
|
||
uint16_t gddr6_mr7; // gddr6 mode register7 value
|
||
char dram_pnstring[20]; // part number end with '0'
|
||
};
|
||
|
||
struct atom_vram_info_header_v2_4 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
|
||
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
|
||
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
|
||
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
|
||
uint16_t dram_data_remap_tbloffset; // reserved for now
|
||
uint16_t reserved; // offset of reserved
|
||
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
|
||
uint16_t vram_rsd2;
|
||
uint8_t vram_module_num; // indicate number of VRAM module
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
|
||
struct atom_vram_module_v10 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
|
||
};
|
||
|
||
struct atom_vram_module_v11 {
|
||
// Design Specific Values
|
||
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
|
||
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
|
||
uint16_t mem_voltage; // mem_voltage
|
||
uint16_t vram_module_size; // Size of atom_vram_module_v9
|
||
uint8_t ext_memory_id; // Current memory module ID
|
||
uint8_t memory_type; // enum of atom_dgpu_vram_type
|
||
uint8_t channel_num; // Number of mem. channels supported in this module
|
||
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
|
||
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
|
||
uint8_t tunningset_id; // MC phy registers set per.
|
||
uint16_t reserved[4]; // reserved
|
||
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
|
||
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
|
||
uint8_t vram_flags; // bit0= bankgroup enable
|
||
uint8_t vram_rsd2; // reserved
|
||
uint16_t gddr6_mr10; // gddr6 mode register10 value
|
||
uint16_t gddr6_mr0; // gddr6 mode register0 value
|
||
uint16_t gddr6_mr1; // gddr6 mode register1 value
|
||
uint16_t gddr6_mr2; // gddr6 mode register2 value
|
||
uint16_t gddr6_mr4; // gddr6 mode register4 value
|
||
uint16_t gddr6_mr7; // gddr6 mode register7 value
|
||
uint16_t gddr6_mr8; // gddr6 mode register8 value
|
||
char dram_pnstring[40]; // part number end with '0'.
|
||
};
|
||
|
||
struct atom_gddr6_ac_timing_v2_5 {
|
||
uint32_t u32umc_id_access;
|
||
uint8_t RL;
|
||
uint8_t WL;
|
||
uint8_t tRAS;
|
||
uint8_t tRC;
|
||
|
||
uint16_t tREFI;
|
||
uint8_t tRFC;
|
||
uint8_t tRFCpb;
|
||
|
||
uint8_t tRREFD;
|
||
uint8_t tRCDRD;
|
||
uint8_t tRCDWR;
|
||
uint8_t tRP;
|
||
|
||
uint8_t tRRDS;
|
||
uint8_t tRRDL;
|
||
uint8_t tWR;
|
||
uint8_t tWTRS;
|
||
|
||
uint8_t tWTRL;
|
||
uint8_t tFAW;
|
||
uint8_t tCCDS;
|
||
uint8_t tCCDL;
|
||
|
||
uint8_t tCRCRL;
|
||
uint8_t tCRCWL;
|
||
uint8_t tCKE;
|
||
uint8_t tCKSRE;
|
||
|
||
uint8_t tCKSRX;
|
||
uint8_t tRTPS;
|
||
uint8_t tRTPL;
|
||
uint8_t tMRD;
|
||
|
||
uint8_t tMOD;
|
||
uint8_t tXS;
|
||
uint8_t tXHP;
|
||
uint8_t tXSMRS;
|
||
|
||
uint32_t tXSH;
|
||
|
||
uint8_t tPD;
|
||
uint8_t tXP;
|
||
uint8_t tCPDED;
|
||
uint8_t tACTPDE;
|
||
|
||
uint8_t tPREPDE;
|
||
uint8_t tREFPDE;
|
||
uint8_t tMRSPDEN;
|
||
uint8_t tRDSRE;
|
||
|
||
uint8_t tWRSRE;
|
||
uint8_t tPPD;
|
||
uint8_t tCCDMW;
|
||
uint8_t tWTRTR;
|
||
|
||
uint8_t tLTLTR;
|
||
uint8_t tREFTR;
|
||
uint8_t VNDR;
|
||
uint8_t reserved[9];
|
||
};
|
||
|
||
struct atom_gddr6_bit_byte_remap {
|
||
uint32_t dphy_byteremap; //mmUMC_DPHY_ByteRemap
|
||
uint32_t dphy_bitremap0; //mmUMC_DPHY_BitRemap0
|
||
uint32_t dphy_bitremap1; //mmUMC_DPHY_BitRemap1
|
||
uint32_t dphy_bitremap2; //mmUMC_DPHY_BitRemap2
|
||
uint32_t aphy_bitremap0; //mmUMC_APHY_BitRemap0
|
||
uint32_t aphy_bitremap1; //mmUMC_APHY_BitRemap1
|
||
uint32_t phy_dram; //mmUMC_PHY_DRAM
|
||
};
|
||
|
||
struct atom_gddr6_dram_data_remap {
|
||
uint32_t table_size;
|
||
uint8_t phyintf_ck_inverted[8]; //UMC_PHY_PHYINTF_CNTL.INV_CK
|
||
struct atom_gddr6_bit_byte_remap bit_byte_remap[16];
|
||
};
|
||
|
||
struct atom_vram_info_header_v2_5 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust settings
|
||
uint16_t gddr6_ac_timing_offset; // offset of atom_gddr6_ac_timing_v2_5 structure for memory clock specific UMC settings
|
||
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
|
||
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
|
||
uint16_t dram_data_remap_tbloffset; // offset of atom_gddr6_dram_data_remap array to indicate DRAM data lane to GPU mapping
|
||
uint16_t reserved; // offset of reserved
|
||
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
|
||
uint16_t strobe_mode_patch_tbloffset; // offset of atom_umc_init_reg_block structure for Strobe Mode memory clock specific UMC settings
|
||
uint8_t vram_module_num; // indicate number of VRAM module
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
|
||
struct atom_vram_module_v11 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
|
||
};
|
||
|
||
struct atom_vram_info_header_v2_6 {
|
||
struct atom_common_table_header table_header;
|
||
uint16_t mem_adjust_tbloffset;
|
||
uint16_t mem_clk_patch_tbloffset;
|
||
uint16_t mc_adjust_pertile_tbloffset;
|
||
uint16_t mc_phyinit_tbloffset;
|
||
uint16_t dram_data_remap_tbloffset;
|
||
uint16_t tmrs_seq_offset;
|
||
uint16_t post_ucode_init_offset;
|
||
uint16_t vram_rsd2;
|
||
uint8_t vram_module_num;
|
||
uint8_t umcip_min_ver;
|
||
uint8_t umcip_max_ver;
|
||
uint8_t mc_phy_tile_num;
|
||
struct atom_vram_module_v9 vram_module[16];
|
||
};
|
||
/*
|
||
***************************************************************************
|
||
Data Table voltageobject_info structure
|
||
***************************************************************************
|
||
*/
|
||
struct atom_i2c_data_entry
|
||
{
|
||
uint16_t i2c_reg_index; // i2c register address, can be up to 16bit
|
||
uint16_t i2c_reg_data; // i2c register data, can be up to 16bit
|
||
};
|
||
|
||
struct atom_voltage_object_header_v4{
|
||
uint8_t voltage_type; //enum atom_voltage_type
|
||
uint8_t voltage_mode; //enum atom_voltage_object_mode
|
||
uint16_t object_size; //Size of Object
|
||
};
|
||
|
||
// atom_voltage_object_header_v4.voltage_mode
|
||
enum atom_voltage_object_mode
|
||
{
|
||
VOLTAGE_OBJ_GPIO_LUT = 0, //VOLTAGE and GPIO Lookup table ->atom_gpio_voltage_object_v4
|
||
VOLTAGE_OBJ_VR_I2C_INIT_SEQ = 3, //VOLTAGE REGULATOR INIT sequece through I2C -> atom_i2c_voltage_object_v4
|
||
VOLTAGE_OBJ_PHASE_LUT = 4, //Set Vregulator Phase lookup table ->atom_gpio_voltage_object_v4
|
||
VOLTAGE_OBJ_SVID2 = 7, //Indicate voltage control by SVID2 ->atom_svid2_voltage_object_v4
|
||
VOLTAGE_OBJ_EVV = 8,
|
||
VOLTAGE_OBJ_MERGED_POWER = 9,
|
||
};
|
||
|
||
struct atom_i2c_voltage_object_v4
|
||
{
|
||
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
|
||
uint8_t regulator_id; //Indicate Voltage Regulator Id
|
||
uint8_t i2c_id;
|
||
uint8_t i2c_slave_addr;
|
||
uint8_t i2c_control_offset;
|
||
uint8_t i2c_flag; // Bit0: 0 - One byte data; 1 - Two byte data
|
||
uint8_t i2c_speed; // =0, use default i2c speed, otherwise use it in unit of kHz.
|
||
uint8_t reserved[2];
|
||
struct atom_i2c_data_entry i2cdatalut[1]; // end with 0xff
|
||
};
|
||
|
||
// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
|
||
enum atom_i2c_voltage_control_flag
|
||
{
|
||
VOLTAGE_DATA_ONE_BYTE = 0,
|
||
VOLTAGE_DATA_TWO_BYTE = 1,
|
||
};
|
||
|
||
|
||
struct atom_voltage_gpio_map_lut
|
||
{
|
||
uint32_t voltage_gpio_reg_val; // The Voltage ID which is used to program GPIO register
|
||
uint16_t voltage_level_mv; // The corresponding Voltage Value, in mV
|
||
};
|
||
|
||
struct atom_gpio_voltage_object_v4
|
||
{
|
||
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
|
||
uint8_t gpio_control_id; // default is 0 which indicate control through CG VID mode
|
||
uint8_t gpio_entry_num; // indiate the entry numbers of Votlage/Gpio value Look up table
|
||
uint8_t phase_delay_us; // phase delay in unit of micro second
|
||
uint8_t reserved;
|
||
uint32_t gpio_mask_val; // GPIO Mask value
|
||
struct atom_voltage_gpio_map_lut voltage_gpio_lut[1];
|
||
};
|
||
|
||
struct atom_svid2_voltage_object_v4
|
||
{
|
||
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_SVID2
|
||
uint8_t loadline_psi1; // bit4:0= loadline setting ( Core Loadline trim and offset trim ), bit5=0:PSI1_L disable =1: PSI1_L enable
|
||
uint8_t psi0_l_vid_thresd; // VR PSI0_L VID threshold
|
||
uint8_t psi0_enable; //
|
||
uint8_t maxvstep;
|
||
uint8_t telemetry_offset;
|
||
uint8_t telemetry_gain;
|
||
uint16_t reserved1;
|
||
};
|
||
|
||
struct atom_merged_voltage_object_v4
|
||
{
|
||
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_MERGED_POWER
|
||
uint8_t merged_powerrail_type; //enum atom_voltage_type
|
||
uint8_t reserved[3];
|
||
};
|
||
|
||
union atom_voltage_object_v4{
|
||
struct atom_gpio_voltage_object_v4 gpio_voltage_obj;
|
||
struct atom_i2c_voltage_object_v4 i2c_voltage_obj;
|
||
struct atom_svid2_voltage_object_v4 svid2_voltage_obj;
|
||
struct atom_merged_voltage_object_v4 merged_voltage_obj;
|
||
};
|
||
|
||
struct atom_voltage_objects_info_v4_1
|
||
{
|
||
struct atom_common_table_header table_header;
|
||
union atom_voltage_object_v4 voltage_object[1]; //Info for Voltage control
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
All Command Function structure definition
|
||
***************************************************************************
|
||
*/
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by asic_init
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct asic_init_engine_parameters
|
||
{
|
||
uint32_t sclkfreqin10khz:24;
|
||
uint32_t engineflag:8; /* enum atom_asic_init_engine_flag */
|
||
};
|
||
|
||
struct asic_init_mem_parameters
|
||
{
|
||
uint32_t mclkfreqin10khz:24;
|
||
uint32_t memflag:8; /* enum atom_asic_init_mem_flag */
|
||
};
|
||
|
||
struct asic_init_parameters_v2_1
|
||
{
|
||
struct asic_init_engine_parameters engineparam;
|
||
struct asic_init_mem_parameters memparam;
|
||
};
|
||
|
||
struct asic_init_ps_allocation_v2_1
|
||
{
|
||
struct asic_init_parameters_v2_1 param;
|
||
uint32_t reserved[16];
|
||
};
|
||
|
||
|
||
enum atom_asic_init_engine_flag
|
||
{
|
||
b3NORMAL_ENGINE_INIT = 0,
|
||
b3SRIOV_SKIP_ASIC_INIT = 0x02,
|
||
b3SRIOV_LOAD_UCODE = 0x40,
|
||
};
|
||
|
||
enum atom_asic_init_mem_flag
|
||
{
|
||
b3NORMAL_MEM_INIT = 0,
|
||
b3DRAM_SELF_REFRESH_EXIT =0x20,
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by setengineclock
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct set_engine_clock_parameters_v2_1
|
||
{
|
||
uint32_t sclkfreqin10khz:24;
|
||
uint32_t sclkflag:8; /* enum atom_set_engine_mem_clock_flag, */
|
||
uint32_t reserved[10];
|
||
};
|
||
|
||
struct set_engine_clock_ps_allocation_v2_1
|
||
{
|
||
struct set_engine_clock_parameters_v2_1 clockinfo;
|
||
uint32_t reserved[10];
|
||
};
|
||
|
||
|
||
enum atom_set_engine_mem_clock_flag
|
||
{
|
||
b3NORMAL_CHANGE_CLOCK = 0,
|
||
b3FIRST_TIME_CHANGE_CLOCK = 0x08,
|
||
b3STORE_DPM_TRAINGING = 0x40, //Applicable to memory clock change,when set, it store specific DPM mode training result
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by getengineclock
|
||
***************************************************************************
|
||
*/
|
||
struct get_engine_clock_parameter
|
||
{
|
||
uint32_t sclk_10khz; // current engine speed in 10KHz unit
|
||
uint32_t reserved;
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by setmemoryclock
|
||
***************************************************************************
|
||
*/
|
||
struct set_memory_clock_parameters_v2_1
|
||
{
|
||
uint32_t mclkfreqin10khz:24;
|
||
uint32_t mclkflag:8; /* enum atom_set_engine_mem_clock_flag, */
|
||
uint32_t reserved[10];
|
||
};
|
||
|
||
struct set_memory_clock_ps_allocation_v2_1
|
||
{
|
||
struct set_memory_clock_parameters_v2_1 clockinfo;
|
||
uint32_t reserved[10];
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by getmemoryclock
|
||
***************************************************************************
|
||
*/
|
||
struct get_memory_clock_parameter
|
||
{
|
||
uint32_t mclk_10khz; // current engine speed in 10KHz unit
|
||
uint32_t reserved;
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by setvoltage
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct set_voltage_parameters_v1_4
|
||
{
|
||
uint8_t voltagetype; /* enum atom_voltage_type */
|
||
uint8_t command; /* Indicate action: Set voltage level, enum atom_set_voltage_command */
|
||
uint16_t vlevel_mv; /* real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) */
|
||
};
|
||
|
||
//set_voltage_parameters_v2_1.voltagemode
|
||
enum atom_set_voltage_command{
|
||
ATOM_SET_VOLTAGE = 0,
|
||
ATOM_INIT_VOLTAGE_REGULATOR = 3,
|
||
ATOM_SET_VOLTAGE_PHASE = 4,
|
||
ATOM_GET_LEAKAGE_ID = 8,
|
||
};
|
||
|
||
struct set_voltage_ps_allocation_v1_4
|
||
{
|
||
struct set_voltage_parameters_v1_4 setvoltageparam;
|
||
uint32_t reserved[10];
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by computegpuclockparam
|
||
***************************************************************************
|
||
*/
|
||
|
||
//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
|
||
enum atom_gpu_clock_type
|
||
{
|
||
COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK =0x00,
|
||
COMPUTE_GPUCLK_INPUT_FLAG_GFXCLK =0x01,
|
||
COMPUTE_GPUCLK_INPUT_FLAG_UCLK =0x02,
|
||
};
|
||
|
||
struct compute_gpu_clock_input_parameter_v1_8
|
||
{
|
||
uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock
|
||
uint32_t gpu_clock_type:8; //Input indicate clock type: enum atom_gpu_clock_type
|
||
uint32_t reserved[5];
|
||
};
|
||
|
||
|
||
struct compute_gpu_clock_output_parameter_v1_8
|
||
{
|
||
uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock
|
||
uint32_t dfs_did:8; //return parameter: DFS divider which is used to program to register directly
|
||
uint32_t pll_fb_mult; //Feedback Multiplier, bit 8:0 int, bit 15:12 post_div, bit 31:16 frac
|
||
uint32_t pll_ss_fbsmult; // Spread FB Mult: bit 8:0 int, bit 31:16 frac
|
||
uint16_t pll_ss_slew_frac;
|
||
uint8_t pll_ss_enable;
|
||
uint8_t reserved;
|
||
uint32_t reserved1[2];
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by ReadEfuseValue
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct read_efuse_input_parameters_v3_1
|
||
{
|
||
uint16_t efuse_start_index;
|
||
uint8_t reserved;
|
||
uint8_t bitslen;
|
||
};
|
||
|
||
// ReadEfuseValue input/output parameter
|
||
union read_efuse_value_parameters_v3_1
|
||
{
|
||
struct read_efuse_input_parameters_v3_1 efuse_info;
|
||
uint32_t efusevalue;
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by getsmuclockinfo
|
||
***************************************************************************
|
||
*/
|
||
struct atom_get_smu_clock_info_parameters_v3_1
|
||
{
|
||
uint8_t syspll_id; // 0= syspll0, 1=syspll1, 2=syspll2
|
||
uint8_t clk_id; // atom_smu9_syspll0_clock_id (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ )
|
||
uint8_t command; // enum of atom_get_smu_clock_info_command
|
||
uint8_t dfsdid; // =0: get DFS DID from register, >0, give DFS divider, (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ )
|
||
};
|
||
|
||
enum atom_get_smu_clock_info_command
|
||
{
|
||
GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ = 0,
|
||
GET_SMU_CLOCK_INFO_V3_1_GET_PLLVCO_FREQ = 1,
|
||
GET_SMU_CLOCK_INFO_V3_1_GET_PLLREFCLK_FREQ = 2,
|
||
};
|
||
|
||
enum atom_smu9_syspll0_clock_id
|
||
{
|
||
SMU9_SYSPLL0_SMNCLK_ID = 0, // SMNCLK
|
||
SMU9_SYSPLL0_SOCCLK_ID = 1, // SOCCLK (FCLK)
|
||
SMU9_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
|
||
SMU9_SYSPLL0_MP1CLK_ID = 3, // MP1CLK
|
||
SMU9_SYSPLL0_LCLK_ID = 4, // LCLK
|
||
SMU9_SYSPLL0_DCLK_ID = 5, // DCLK
|
||
SMU9_SYSPLL0_VCLK_ID = 6, // VCLK
|
||
SMU9_SYSPLL0_ECLK_ID = 7, // ECLK
|
||
SMU9_SYSPLL0_DCEFCLK_ID = 8, // DCEFCLK
|
||
SMU9_SYSPLL0_DPREFCLK_ID = 10, // DPREFCLK
|
||
SMU9_SYSPLL0_DISPCLK_ID = 11, // DISPCLK
|
||
};
|
||
|
||
enum atom_smu11_syspll_id {
|
||
SMU11_SYSPLL0_ID = 0,
|
||
SMU11_SYSPLL1_0_ID = 1,
|
||
SMU11_SYSPLL1_1_ID = 2,
|
||
SMU11_SYSPLL1_2_ID = 3,
|
||
SMU11_SYSPLL2_ID = 4,
|
||
SMU11_SYSPLL3_0_ID = 5,
|
||
SMU11_SYSPLL3_1_ID = 6,
|
||
};
|
||
|
||
enum atom_smu11_syspll0_clock_id {
|
||
SMU11_SYSPLL0_ECLK_ID = 0, // ECLK
|
||
SMU11_SYSPLL0_SOCCLK_ID = 1, // SOCCLK
|
||
SMU11_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
|
||
SMU11_SYSPLL0_DCLK_ID = 3, // DCLK
|
||
SMU11_SYSPLL0_VCLK_ID = 4, // VCLK
|
||
SMU11_SYSPLL0_DCEFCLK_ID = 5, // DCEFCLK
|
||
};
|
||
|
||
enum atom_smu11_syspll1_0_clock_id {
|
||
SMU11_SYSPLL1_0_UCLKA_ID = 0, // UCLK_a
|
||
};
|
||
|
||
enum atom_smu11_syspll1_1_clock_id {
|
||
SMU11_SYSPLL1_0_UCLKB_ID = 0, // UCLK_b
|
||
};
|
||
|
||
enum atom_smu11_syspll1_2_clock_id {
|
||
SMU11_SYSPLL1_0_FCLK_ID = 0, // FCLK
|
||
};
|
||
|
||
enum atom_smu11_syspll2_clock_id {
|
||
SMU11_SYSPLL2_GFXCLK_ID = 0, // GFXCLK
|
||
};
|
||
|
||
enum atom_smu11_syspll3_0_clock_id {
|
||
SMU11_SYSPLL3_0_WAFCLK_ID = 0, // WAFCLK
|
||
SMU11_SYSPLL3_0_DISPCLK_ID = 1, // DISPCLK
|
||
SMU11_SYSPLL3_0_DPREFCLK_ID = 2, // DPREFCLK
|
||
};
|
||
|
||
enum atom_smu11_syspll3_1_clock_id {
|
||
SMU11_SYSPLL3_1_MP1CLK_ID = 0, // MP1CLK
|
||
SMU11_SYSPLL3_1_SMNCLK_ID = 1, // SMNCLK
|
||
SMU11_SYSPLL3_1_LCLK_ID = 2, // LCLK
|
||
};
|
||
|
||
enum atom_smu12_syspll_id {
|
||
SMU12_SYSPLL0_ID = 0,
|
||
SMU12_SYSPLL1_ID = 1,
|
||
SMU12_SYSPLL2_ID = 2,
|
||
SMU12_SYSPLL3_0_ID = 3,
|
||
SMU12_SYSPLL3_1_ID = 4,
|
||
};
|
||
|
||
enum atom_smu12_syspll0_clock_id {
|
||
SMU12_SYSPLL0_SMNCLK_ID = 0, // SOCCLK
|
||
SMU12_SYSPLL0_SOCCLK_ID = 1, // SOCCLK
|
||
SMU12_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
|
||
SMU12_SYSPLL0_MP1CLK_ID = 3, // MP1CLK
|
||
SMU12_SYSPLL0_MP2CLK_ID = 4, // MP2CLK
|
||
SMU12_SYSPLL0_VCLK_ID = 5, // VCLK
|
||
SMU12_SYSPLL0_LCLK_ID = 6, // LCLK
|
||
SMU12_SYSPLL0_DCLK_ID = 7, // DCLK
|
||
SMU12_SYSPLL0_ACLK_ID = 8, // ACLK
|
||
SMU12_SYSPLL0_ISPCLK_ID = 9, // ISPCLK
|
||
SMU12_SYSPLL0_SHUBCLK_ID = 10, // SHUBCLK
|
||
};
|
||
|
||
enum atom_smu12_syspll1_clock_id {
|
||
SMU12_SYSPLL1_DISPCLK_ID = 0, // DISPCLK
|
||
SMU12_SYSPLL1_DPPCLK_ID = 1, // DPPCLK
|
||
SMU12_SYSPLL1_DPREFCLK_ID = 2, // DPREFCLK
|
||
SMU12_SYSPLL1_DCFCLK_ID = 3, // DCFCLK
|
||
};
|
||
|
||
enum atom_smu12_syspll2_clock_id {
|
||
SMU12_SYSPLL2_Pre_GFXCLK_ID = 0, // Pre_GFXCLK
|
||
};
|
||
|
||
enum atom_smu12_syspll3_0_clock_id {
|
||
SMU12_SYSPLL3_0_FCLK_ID = 0, // FCLK
|
||
};
|
||
|
||
enum atom_smu12_syspll3_1_clock_id {
|
||
SMU12_SYSPLL3_1_UMCCLK_ID = 0, // UMCCLK
|
||
};
|
||
|
||
struct atom_get_smu_clock_info_output_parameters_v3_1
|
||
{
|
||
union {
|
||
uint32_t smu_clock_freq_hz;
|
||
uint32_t syspllvcofreq_10khz;
|
||
uint32_t sysspllrefclk_10khz;
|
||
}atom_smu_outputclkfreq;
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by dynamicmemorysettings
|
||
***************************************************************************
|
||
*/
|
||
|
||
enum atom_dynamic_memory_setting_command
|
||
{
|
||
COMPUTE_MEMORY_PLL_PARAM = 1,
|
||
COMPUTE_ENGINE_PLL_PARAM = 2,
|
||
ADJUST_MC_SETTING_PARAM = 3,
|
||
};
|
||
|
||
/* when command = COMPUTE_MEMORY_PLL_PARAM or ADJUST_MC_SETTING_PARAM */
|
||
struct dynamic_mclk_settings_parameters_v2_1
|
||
{
|
||
uint32_t mclk_10khz:24; //Input= target mclk
|
||
uint32_t command:8; //command enum of atom_dynamic_memory_setting_command
|
||
uint32_t reserved;
|
||
};
|
||
|
||
/* when command = COMPUTE_ENGINE_PLL_PARAM */
|
||
struct dynamic_sclk_settings_parameters_v2_1
|
||
{
|
||
uint32_t sclk_10khz:24; //Input= target mclk
|
||
uint32_t command:8; //command enum of atom_dynamic_memory_setting_command
|
||
uint32_t mclk_10khz;
|
||
uint32_t reserved;
|
||
};
|
||
|
||
union dynamic_memory_settings_parameters_v2_1
|
||
{
|
||
struct dynamic_mclk_settings_parameters_v2_1 mclk_setting;
|
||
struct dynamic_sclk_settings_parameters_v2_1 sclk_setting;
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by memorytraining
|
||
***************************************************************************
|
||
*/
|
||
|
||
enum atom_umc6_0_ucode_function_call_enum_id
|
||
{
|
||
UMC60_UCODE_FUNC_ID_REINIT = 0,
|
||
UMC60_UCODE_FUNC_ID_ENTER_SELFREFRESH = 1,
|
||
UMC60_UCODE_FUNC_ID_EXIT_SELFREFRESH = 2,
|
||
};
|
||
|
||
|
||
struct memory_training_parameters_v2_1
|
||
{
|
||
uint8_t ucode_func_id;
|
||
uint8_t ucode_reserved[3];
|
||
uint32_t reserved[5];
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by setpixelclock
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct set_pixel_clock_parameter_v1_7
|
||
{
|
||
uint32_t pixclk_100hz; // target the pixel clock to drive the CRTC timing in unit of 100Hz.
|
||
|
||
uint8_t pll_id; // ATOM_PHY_PLL0/ATOM_PHY_PLL1/ATOM_PPLL0
|
||
uint8_t encoderobjid; // ASIC encoder id defined in objectId.h,
|
||
// indicate which graphic encoder will be used.
|
||
uint8_t encoder_mode; // Encoder mode:
|
||
uint8_t miscinfo; // enum atom_set_pixel_clock_v1_7_misc_info
|
||
uint8_t crtc_id; // enum of atom_crtc_def
|
||
uint8_t deep_color_ratio; // HDMI panel bit depth: enum atom_set_pixel_clock_v1_7_deepcolor_ratio
|
||
uint8_t reserved1[2];
|
||
uint32_t reserved2;
|
||
};
|
||
|
||
//ucMiscInfo
|
||
enum atom_set_pixel_clock_v1_7_misc_info
|
||
{
|
||
PIXEL_CLOCK_V7_MISC_FORCE_PROG_PPLL = 0x01,
|
||
PIXEL_CLOCK_V7_MISC_PROG_PHYPLL = 0x02,
|
||
PIXEL_CLOCK_V7_MISC_YUV420_MODE = 0x04,
|
||
PIXEL_CLOCK_V7_MISC_DVI_DUALLINK_EN = 0x08,
|
||
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC = 0x30,
|
||
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_XTALIN = 0x00,
|
||
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_PCIE = 0x10,
|
||
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_GENLK = 0x20,
|
||
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_REFPAD = 0x30,
|
||
PIXEL_CLOCK_V7_MISC_ATOMIC_UPDATE = 0x40,
|
||
PIXEL_CLOCK_V7_MISC_FORCE_SS_DIS = 0x80,
|
||
};
|
||
|
||
/* deep_color_ratio */
|
||
enum atom_set_pixel_clock_v1_7_deepcolor_ratio
|
||
{
|
||
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
|
||
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
|
||
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
|
||
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by setdceclock
|
||
***************************************************************************
|
||
*/
|
||
|
||
// SetDCEClock input parameter for DCE11.2( ELM and BF ) and above
|
||
struct set_dce_clock_parameters_v2_1
|
||
{
|
||
uint32_t dceclk_10khz; // target DCE frequency in unit of 10KHZ, return real DISPCLK/DPREFCLK frequency.
|
||
uint8_t dceclktype; // =0: DISPCLK =1: DPREFCLK =2: PIXCLK
|
||
uint8_t dceclksrc; // ATOM_PLL0 or ATOM_GCK_DFS or ATOM_FCH_CLK or ATOM_COMBOPHY_PLLx
|
||
uint8_t dceclkflag; // Bit [1:0] = PPLL ref clock source ( when ucDCEClkSrc= ATOM_PPLL0 )
|
||
uint8_t crtc_id; // ucDisp Pipe Id, ATOM_CRTC0/1/2/..., use only when ucDCEClkType = PIXCLK
|
||
};
|
||
|
||
//ucDCEClkType
|
||
enum atom_set_dce_clock_clock_type
|
||
{
|
||
DCE_CLOCK_TYPE_DISPCLK = 0,
|
||
DCE_CLOCK_TYPE_DPREFCLK = 1,
|
||
DCE_CLOCK_TYPE_PIXELCLK = 2, // used by VBIOS internally, called by SetPixelClock
|
||
};
|
||
|
||
//ucDCEClkFlag when ucDCEClkType == DPREFCLK
|
||
enum atom_set_dce_clock_dprefclk_flag
|
||
{
|
||
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_MASK = 0x03,
|
||
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENERICA = 0x00,
|
||
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENLK = 0x01,
|
||
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_PCIE = 0x02,
|
||
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_XTALIN = 0x03,
|
||
};
|
||
|
||
//ucDCEClkFlag when ucDCEClkType == PIXCLK
|
||
enum atom_set_dce_clock_pixclk_flag
|
||
{
|
||
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_MASK = 0x03,
|
||
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
|
||
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
|
||
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
|
||
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
|
||
DCE_CLOCK_FLAG_PIXCLK_YUV420_MODE = 0x04,
|
||
};
|
||
|
||
struct set_dce_clock_ps_allocation_v2_1
|
||
{
|
||
struct set_dce_clock_parameters_v2_1 param;
|
||
uint32_t ulReserved[2];
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by BlankCRTC
|
||
/****************************************************************************/
|
||
struct blank_crtc_parameters
|
||
{
|
||
uint8_t crtc_id; // enum atom_crtc_def
|
||
uint8_t blanking; // enum atom_blank_crtc_command
|
||
uint16_t reserved;
|
||
uint32_t reserved1;
|
||
};
|
||
|
||
enum atom_blank_crtc_command
|
||
{
|
||
ATOM_BLANKING = 1,
|
||
ATOM_BLANKING_OFF = 0,
|
||
};
|
||
|
||
/****************************************************************************/
|
||
// Structures used by enablecrtc
|
||
/****************************************************************************/
|
||
struct enable_crtc_parameters
|
||
{
|
||
uint8_t crtc_id; // enum atom_crtc_def
|
||
uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE
|
||
uint8_t padding[2];
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structure used by EnableDispPowerGating
|
||
/****************************************************************************/
|
||
struct enable_disp_power_gating_parameters_v2_1
|
||
{
|
||
uint8_t disp_pipe_id; // ATOM_CRTC1, ATOM_CRTC2, ...
|
||
uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE
|
||
uint8_t padding[2];
|
||
};
|
||
|
||
struct enable_disp_power_gating_ps_allocation
|
||
{
|
||
struct enable_disp_power_gating_parameters_v2_1 param;
|
||
uint32_t ulReserved[4];
|
||
};
|
||
|
||
/****************************************************************************/
|
||
// Structure used in setcrtc_usingdtdtiming
|
||
/****************************************************************************/
|
||
struct set_crtc_using_dtd_timing_parameters
|
||
{
|
||
uint16_t h_size;
|
||
uint16_t h_blanking_time;
|
||
uint16_t v_size;
|
||
uint16_t v_blanking_time;
|
||
uint16_t h_syncoffset;
|
||
uint16_t h_syncwidth;
|
||
uint16_t v_syncoffset;
|
||
uint16_t v_syncwidth;
|
||
uint16_t modemiscinfo;
|
||
uint8_t h_border;
|
||
uint8_t v_border;
|
||
uint8_t crtc_id; // enum atom_crtc_def
|
||
uint8_t encoder_mode; // atom_encode_mode_def
|
||
uint8_t padding[2];
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by processi2cchanneltransaction
|
||
/****************************************************************************/
|
||
struct process_i2c_channel_transaction_parameters
|
||
{
|
||
uint8_t i2cspeed_khz;
|
||
union {
|
||
uint8_t regindex;
|
||
uint8_t status; /* enum atom_process_i2c_flag */
|
||
} regind_status;
|
||
uint16_t i2c_data_out;
|
||
uint8_t flag; /* enum atom_process_i2c_status */
|
||
uint8_t trans_bytes;
|
||
uint8_t slave_addr;
|
||
uint8_t i2c_id;
|
||
};
|
||
|
||
//ucFlag
|
||
enum atom_process_i2c_flag
|
||
{
|
||
HW_I2C_WRITE = 1,
|
||
HW_I2C_READ = 0,
|
||
I2C_2BYTE_ADDR = 0x02,
|
||
HW_I2C_SMBUS_BYTE_WR = 0x04,
|
||
};
|
||
|
||
//status
|
||
enum atom_process_i2c_status
|
||
{
|
||
HW_ASSISTED_I2C_STATUS_FAILURE =2,
|
||
HW_ASSISTED_I2C_STATUS_SUCCESS =1,
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by processauxchanneltransaction
|
||
/****************************************************************************/
|
||
|
||
struct process_aux_channel_transaction_parameters_v1_2
|
||
{
|
||
uint16_t aux_request;
|
||
uint16_t dataout;
|
||
uint8_t channelid;
|
||
union {
|
||
uint8_t reply_status;
|
||
uint8_t aux_delay;
|
||
} aux_status_delay;
|
||
uint8_t dataout_len;
|
||
uint8_t hpd_id; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by selectcrtc_source
|
||
/****************************************************************************/
|
||
|
||
struct select_crtc_source_parameters_v2_3
|
||
{
|
||
uint8_t crtc_id; // enum atom_crtc_def
|
||
uint8_t encoder_id; // enum atom_dig_def
|
||
uint8_t encode_mode; // enum atom_encode_mode_def
|
||
uint8_t dst_bpc; // enum atom_panel_bit_per_color
|
||
};
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by digxencodercontrol
|
||
/****************************************************************************/
|
||
|
||
// ucAction:
|
||
enum atom_dig_encoder_control_action
|
||
{
|
||
ATOM_ENCODER_CMD_DISABLE_DIG = 0,
|
||
ATOM_ENCODER_CMD_ENABLE_DIG = 1,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_START = 0x08,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 = 0x09,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 = 0x0a,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 = 0x13,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE = 0x0b,
|
||
ATOM_ENCODER_CMD_DP_VIDEO_OFF = 0x0c,
|
||
ATOM_ENCODER_CMD_DP_VIDEO_ON = 0x0d,
|
||
ATOM_ENCODER_CMD_SETUP_PANEL_MODE = 0x10,
|
||
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN4 = 0x14,
|
||
ATOM_ENCODER_CMD_STREAM_SETUP = 0x0F,
|
||
ATOM_ENCODER_CMD_LINK_SETUP = 0x11,
|
||
ATOM_ENCODER_CMD_ENCODER_BLANK = 0x12,
|
||
};
|
||
|
||
//define ucPanelMode
|
||
enum atom_dig_encoder_control_panelmode
|
||
{
|
||
DP_PANEL_MODE_DISABLE = 0x00,
|
||
DP_PANEL_MODE_ENABLE_eDP_MODE = 0x01,
|
||
DP_PANEL_MODE_ENABLE_LVLINK_MODE = 0x11,
|
||
};
|
||
|
||
//ucDigId
|
||
enum atom_dig_encoder_control_v5_digid
|
||
{
|
||
ATOM_ENCODER_CONFIG_V5_DIG0_ENCODER = 0x00,
|
||
ATOM_ENCODER_CONFIG_V5_DIG1_ENCODER = 0x01,
|
||
ATOM_ENCODER_CONFIG_V5_DIG2_ENCODER = 0x02,
|
||
ATOM_ENCODER_CONFIG_V5_DIG3_ENCODER = 0x03,
|
||
ATOM_ENCODER_CONFIG_V5_DIG4_ENCODER = 0x04,
|
||
ATOM_ENCODER_CONFIG_V5_DIG5_ENCODER = 0x05,
|
||
ATOM_ENCODER_CONFIG_V5_DIG6_ENCODER = 0x06,
|
||
ATOM_ENCODER_CONFIG_V5_DIG7_ENCODER = 0x07,
|
||
};
|
||
|
||
struct dig_encoder_stream_setup_parameters_v1_5
|
||
{
|
||
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
|
||
uint8_t action; // = ATOM_ENOCODER_CMD_STREAM_SETUP
|
||
uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
|
||
uint8_t lanenum; // Lane number
|
||
uint32_t pclk_10khz; // Pixel Clock in 10Khz
|
||
uint8_t bitpercolor;
|
||
uint8_t dplinkrate_270mhz;//= DP link rate/270Mhz, =6: 1.62G = 10: 2.7G, =20: 5.4Ghz, =30: 8.1Ghz etc
|
||
uint8_t reserved[2];
|
||
};
|
||
|
||
struct dig_encoder_link_setup_parameters_v1_5
|
||
{
|
||
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
|
||
uint8_t action; // = ATOM_ENOCODER_CMD_LINK_SETUP
|
||
uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
|
||
uint8_t lanenum; // Lane number
|
||
uint8_t symclk_10khz; // Symbol Clock in 10Khz
|
||
uint8_t hpd_sel;
|
||
uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
|
||
uint8_t reserved[2];
|
||
};
|
||
|
||
struct dp_panel_mode_set_parameters_v1_5
|
||
{
|
||
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
|
||
uint8_t action; // = ATOM_ENCODER_CMD_DPLINK_SETUP
|
||
uint8_t panelmode; // enum atom_dig_encoder_control_panelmode
|
||
uint8_t reserved1;
|
||
uint32_t reserved2[2];
|
||
};
|
||
|
||
struct dig_encoder_generic_cmd_parameters_v1_5
|
||
{
|
||
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
|
||
uint8_t action; // = rest of generic encoder command which does not carry any parameters
|
||
uint8_t reserved1[2];
|
||
uint32_t reserved2[2];
|
||
};
|
||
|
||
union dig_encoder_control_parameters_v1_5
|
||
{
|
||
struct dig_encoder_generic_cmd_parameters_v1_5 cmd_param;
|
||
struct dig_encoder_stream_setup_parameters_v1_5 stream_param;
|
||
struct dig_encoder_link_setup_parameters_v1_5 link_param;
|
||
struct dp_panel_mode_set_parameters_v1_5 dppanel_param;
|
||
};
|
||
|
||
/*
|
||
***************************************************************************
|
||
Structures used by dig1transmittercontrol
|
||
***************************************************************************
|
||
*/
|
||
struct dig_transmitter_control_parameters_v1_6
|
||
{
|
||
uint8_t phyid; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
|
||
uint8_t action; // define as ATOM_TRANSMITER_ACTION_xxx
|
||
union {
|
||
uint8_t digmode; // enum atom_encode_mode_def
|
||
uint8_t dplaneset; // DP voltage swing and pre-emphasis value defined in DPCD DP_LANE_SET, "DP_LANE_SET__xDB_y_zV"
|
||
} mode_laneset;
|
||
uint8_t lanenum; // Lane number 1, 2, 4, 8
|
||
uint32_t symclk_10khz; // Symbol Clock in 10Khz
|
||
uint8_t hpdsel; // =1: HPD1, =2: HPD2, .... =6: HPD6, =0: HPD is not assigned
|
||
uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
|
||
uint8_t connobj_id; // Connector Object Id defined in ObjectId.h
|
||
uint8_t reserved;
|
||
uint32_t reserved1;
|
||
};
|
||
|
||
struct dig_transmitter_control_ps_allocation_v1_6
|
||
{
|
||
struct dig_transmitter_control_parameters_v1_6 param;
|
||
uint32_t reserved[4];
|
||
};
|
||
|
||
//ucAction
|
||
enum atom_dig_transmitter_control_action
|
||
{
|
||
ATOM_TRANSMITTER_ACTION_DISABLE = 0,
|
||
ATOM_TRANSMITTER_ACTION_ENABLE = 1,
|
||
ATOM_TRANSMITTER_ACTION_LCD_BLOFF = 2,
|
||
ATOM_TRANSMITTER_ACTION_LCD_BLON = 3,
|
||
ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL = 4,
|
||
ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START = 5,
|
||
ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP = 6,
|
||
ATOM_TRANSMITTER_ACTION_INIT = 7,
|
||
ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT = 8,
|
||
ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT = 9,
|
||
ATOM_TRANSMITTER_ACTION_SETUP = 10,
|
||
ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH = 11,
|
||
ATOM_TRANSMITTER_ACTION_POWER_ON = 12,
|
||
ATOM_TRANSMITTER_ACTION_POWER_OFF = 13,
|
||
};
|
||
|
||
// digfe_sel
|
||
enum atom_dig_transmitter_control_digfe_sel
|
||
{
|
||
ATOM_TRANMSITTER_V6__DIGA_SEL = 0x01,
|
||
ATOM_TRANMSITTER_V6__DIGB_SEL = 0x02,
|
||
ATOM_TRANMSITTER_V6__DIGC_SEL = 0x04,
|
||
ATOM_TRANMSITTER_V6__DIGD_SEL = 0x08,
|
||
ATOM_TRANMSITTER_V6__DIGE_SEL = 0x10,
|
||
ATOM_TRANMSITTER_V6__DIGF_SEL = 0x20,
|
||
ATOM_TRANMSITTER_V6__DIGG_SEL = 0x40,
|
||
};
|
||
|
||
|
||
//ucHPDSel
|
||
enum atom_dig_transmitter_control_hpd_sel
|
||
{
|
||
ATOM_TRANSMITTER_V6_NO_HPD_SEL = 0x00,
|
||
ATOM_TRANSMITTER_V6_HPD1_SEL = 0x01,
|
||
ATOM_TRANSMITTER_V6_HPD2_SEL = 0x02,
|
||
ATOM_TRANSMITTER_V6_HPD3_SEL = 0x03,
|
||
ATOM_TRANSMITTER_V6_HPD4_SEL = 0x04,
|
||
ATOM_TRANSMITTER_V6_HPD5_SEL = 0x05,
|
||
ATOM_TRANSMITTER_V6_HPD6_SEL = 0x06,
|
||
};
|
||
|
||
// ucDPLaneSet
|
||
enum atom_dig_transmitter_control_dplaneset
|
||
{
|
||
DP_LANE_SET__0DB_0_4V = 0x00,
|
||
DP_LANE_SET__0DB_0_6V = 0x01,
|
||
DP_LANE_SET__0DB_0_8V = 0x02,
|
||
DP_LANE_SET__0DB_1_2V = 0x03,
|
||
DP_LANE_SET__3_5DB_0_4V = 0x08,
|
||
DP_LANE_SET__3_5DB_0_6V = 0x09,
|
||
DP_LANE_SET__3_5DB_0_8V = 0x0a,
|
||
DP_LANE_SET__6DB_0_4V = 0x10,
|
||
DP_LANE_SET__6DB_0_6V = 0x11,
|
||
DP_LANE_SET__9_5DB_0_4V = 0x18,
|
||
};
|
||
|
||
|
||
|
||
/****************************************************************************/
|
||
// Structures used by ExternalEncoderControl V2.4
|
||
/****************************************************************************/
|
||
|
||
struct external_encoder_control_parameters_v2_4
|
||
{
|
||
uint16_t pixelclock_10khz; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
|
||
uint8_t config; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
|
||
uint8_t action; //
|
||
uint8_t encodermode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
|
||
uint8_t lanenum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
|
||
uint8_t bitpercolor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
|
||
uint8_t hpd_id;
|
||
};
|
||
|
||
|
||
// ucAction
|
||
enum external_encoder_control_action_def
|
||
{
|
||
EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT = 0x00,
|
||
EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT = 0x01,
|
||
EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT = 0x07,
|
||
EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP = 0x0f,
|
||
EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF = 0x10,
|
||
EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING = 0x11,
|
||
EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION = 0x12,
|
||
EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP = 0x14,
|
||
};
|
||
|
||
// ucConfig
|
||
enum external_encoder_control_v2_4_config_def
|
||
{
|
||
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK = 0x03,
|
||
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ = 0x00,
|
||
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ = 0x01,
|
||
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ = 0x02,
|
||
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_3_24GHZ = 0x03,
|
||
EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MAKS = 0x70,
|
||
EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 = 0x00,
|
||
EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 = 0x10,
|
||
EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 = 0x20,
|
||
};
|
||
|
||
struct external_encoder_control_ps_allocation_v2_4
|
||
{
|
||
struct external_encoder_control_parameters_v2_4 sExtEncoder;
|
||
uint32_t reserved[2];
|
||
};
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
AMD ACPI Table
|
||
|
||
***************************************************************************
|
||
*/
|
||
|
||
struct amd_acpi_description_header{
|
||
uint32_t signature;
|
||
uint32_t tableLength; //Length
|
||
uint8_t revision;
|
||
uint8_t checksum;
|
||
uint8_t oemId[6];
|
||
uint8_t oemTableId[8]; //UINT64 OemTableId;
|
||
uint32_t oemRevision;
|
||
uint32_t creatorId;
|
||
uint32_t creatorRevision;
|
||
};
|
||
|
||
struct uefi_acpi_vfct{
|
||
struct amd_acpi_description_header sheader;
|
||
uint8_t tableUUID[16]; //0x24
|
||
uint32_t vbiosimageoffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
|
||
uint32_t lib1Imageoffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
|
||
uint32_t reserved[4]; //0x3C
|
||
};
|
||
|
||
struct vfct_image_header{
|
||
uint32_t pcibus; //0x4C
|
||
uint32_t pcidevice; //0x50
|
||
uint32_t pcifunction; //0x54
|
||
uint16_t vendorid; //0x58
|
||
uint16_t deviceid; //0x5A
|
||
uint16_t ssvid; //0x5C
|
||
uint16_t ssid; //0x5E
|
||
uint32_t revision; //0x60
|
||
uint32_t imagelength; //0x64
|
||
};
|
||
|
||
|
||
struct gop_vbios_content {
|
||
struct vfct_image_header vbiosheader;
|
||
uint8_t vbioscontent[1];
|
||
};
|
||
|
||
struct gop_lib1_content {
|
||
struct vfct_image_header lib1header;
|
||
uint8_t lib1content[1];
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
Scratch Register definitions
|
||
Each number below indicates which scratch regiser request, Active and
|
||
Connect all share the same definitions as display_device_tag defines
|
||
***************************************************************************
|
||
*/
|
||
|
||
enum scratch_register_def{
|
||
ATOM_DEVICE_CONNECT_INFO_DEF = 0,
|
||
ATOM_BL_BRI_LEVEL_INFO_DEF = 2,
|
||
ATOM_ACTIVE_INFO_DEF = 3,
|
||
ATOM_LCD_INFO_DEF = 4,
|
||
ATOM_DEVICE_REQ_INFO_DEF = 5,
|
||
ATOM_ACC_CHANGE_INFO_DEF = 6,
|
||
ATOM_PRE_OS_MODE_INFO_DEF = 7,
|
||
ATOM_PRE_OS_ASSERTION_DEF = 8, //For GOP to record a 32bit assertion code, this is enabled by default in prodution GOP drivers.
|
||
ATOM_INTERNAL_TIMER_INFO_DEF = 10,
|
||
};
|
||
|
||
enum scratch_device_connect_info_bit_def{
|
||
ATOM_DISPLAY_LCD1_CONNECT =0x0002,
|
||
ATOM_DISPLAY_DFP1_CONNECT =0x0008,
|
||
ATOM_DISPLAY_DFP2_CONNECT =0x0080,
|
||
ATOM_DISPLAY_DFP3_CONNECT =0x0200,
|
||
ATOM_DISPLAY_DFP4_CONNECT =0x0400,
|
||
ATOM_DISPLAY_DFP5_CONNECT =0x0800,
|
||
ATOM_DISPLAY_DFP6_CONNECT =0x0040,
|
||
ATOM_DISPLAY_DFPx_CONNECT =0x0ec8,
|
||
ATOM_CONNECT_INFO_DEVICE_MASK =0x0fff,
|
||
};
|
||
|
||
enum scratch_bl_bri_level_info_bit_def{
|
||
ATOM_CURRENT_BL_LEVEL_SHIFT =0x8,
|
||
#ifndef _H2INC
|
||
ATOM_CURRENT_BL_LEVEL_MASK =0x0000ff00,
|
||
ATOM_DEVICE_DPMS_STATE =0x00010000,
|
||
#endif
|
||
};
|
||
|
||
enum scratch_active_info_bits_def{
|
||
ATOM_DISPLAY_LCD1_ACTIVE =0x0002,
|
||
ATOM_DISPLAY_DFP1_ACTIVE =0x0008,
|
||
ATOM_DISPLAY_DFP2_ACTIVE =0x0080,
|
||
ATOM_DISPLAY_DFP3_ACTIVE =0x0200,
|
||
ATOM_DISPLAY_DFP4_ACTIVE =0x0400,
|
||
ATOM_DISPLAY_DFP5_ACTIVE =0x0800,
|
||
ATOM_DISPLAY_DFP6_ACTIVE =0x0040,
|
||
ATOM_ACTIVE_INFO_DEVICE_MASK =0x0fff,
|
||
};
|
||
|
||
enum scratch_device_req_info_bits_def{
|
||
ATOM_DISPLAY_LCD1_REQ =0x0002,
|
||
ATOM_DISPLAY_DFP1_REQ =0x0008,
|
||
ATOM_DISPLAY_DFP2_REQ =0x0080,
|
||
ATOM_DISPLAY_DFP3_REQ =0x0200,
|
||
ATOM_DISPLAY_DFP4_REQ =0x0400,
|
||
ATOM_DISPLAY_DFP5_REQ =0x0800,
|
||
ATOM_DISPLAY_DFP6_REQ =0x0040,
|
||
ATOM_REQ_INFO_DEVICE_MASK =0x0fff,
|
||
};
|
||
|
||
enum scratch_acc_change_info_bitshift_def{
|
||
ATOM_ACC_CHANGE_ACC_MODE_SHIFT =4,
|
||
ATOM_ACC_CHANGE_LID_STATUS_SHIFT =6,
|
||
};
|
||
|
||
enum scratch_acc_change_info_bits_def{
|
||
ATOM_ACC_CHANGE_ACC_MODE =0x00000010,
|
||
ATOM_ACC_CHANGE_LID_STATUS =0x00000040,
|
||
};
|
||
|
||
enum scratch_pre_os_mode_info_bits_def{
|
||
ATOM_PRE_OS_MODE_MASK =0x00000003,
|
||
ATOM_PRE_OS_MODE_VGA =0x00000000,
|
||
ATOM_PRE_OS_MODE_VESA =0x00000001,
|
||
ATOM_PRE_OS_MODE_GOP =0x00000002,
|
||
ATOM_PRE_OS_MODE_PIXEL_DEPTH =0x0000000C,
|
||
ATOM_PRE_OS_MODE_PIXEL_FORMAT_MASK=0x000000F0,
|
||
ATOM_PRE_OS_MODE_8BIT_PAL_EN =0x00000100,
|
||
ATOM_ASIC_INIT_COMPLETE =0x00000200,
|
||
#ifndef _H2INC
|
||
ATOM_PRE_OS_MODE_NUMBER_MASK =0xFFFF0000,
|
||
#endif
|
||
};
|
||
|
||
|
||
|
||
/*
|
||
***************************************************************************
|
||
ATOM firmware ID header file
|
||
!! Please keep it at end of the atomfirmware.h !!
|
||
***************************************************************************
|
||
*/
|
||
#include "atomfirmwareid.h"
|
||
#pragma pack()
|
||
|
||
#endif
|
||
|