linux-zen-desktop/drivers/gpu/drm/ast/ast_main.c

486 lines
13 KiB
C

/*
* Copyright 2012 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
*/
/*
* Authors: Dave Airlie <airlied@redhat.com>
*/
#include <linux/pci.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_gem.h>
#include <drm/drm_managed.h>
#include "ast_drv.h"
void ast_set_index_reg_mask(struct ast_device *ast,
uint32_t base, uint8_t index,
uint8_t mask, uint8_t val)
{
u8 tmp;
ast_io_write8(ast, base, index);
tmp = (ast_io_read8(ast, base + 1) & mask) | val;
ast_set_index_reg(ast, base, index, tmp);
}
uint8_t ast_get_index_reg(struct ast_device *ast,
uint32_t base, uint8_t index)
{
uint8_t ret;
ast_io_write8(ast, base, index);
ret = ast_io_read8(ast, base + 1);
return ret;
}
uint8_t ast_get_index_reg_mask(struct ast_device *ast,
uint32_t base, uint8_t index, uint8_t mask)
{
uint8_t ret;
ast_io_write8(ast, base, index);
ret = ast_io_read8(ast, base + 1) & mask;
return ret;
}
static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
{
struct device_node *np = dev->dev->of_node;
struct ast_device *ast = to_ast_device(dev);
struct pci_dev *pdev = to_pci_dev(dev->dev);
uint32_t data, jregd0, jregd1;
/* Defaults */
ast->config_mode = ast_use_defaults;
*scu_rev = 0xffffffff;
/* Check if we have device-tree properties */
if (np && !of_property_read_u32(np, "aspeed,scu-revision-id",
scu_rev)) {
/* We do, disable P2A access */
ast->config_mode = ast_use_dt;
drm_info(dev, "Using device-tree for configuration\n");
return;
}
/* Not all families have a P2A bridge */
if (pdev->device != PCI_CHIP_AST2000)
return;
/*
* The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
* is disabled. We force using P2A if VGA only mode bit
* is set D[7]
*/
jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
/* Patch AST2500 */
if (((pdev->revision & 0xF0) == 0x40)
&& ((jregd0 & AST_VRAM_INIT_STATUS_MASK) == 0))
ast_patch_ahb_2500(ast);
/* Double check it's actually working */
data = ast_read32(ast, 0xf004);
if ((data != 0xFFFFFFFF) && (data != 0x00)) {
/* P2A works, grab silicon revision */
ast->config_mode = ast_use_p2a;
drm_info(dev, "Using P2A bridge for configuration\n");
/* Read SCU7c (silicon revision register) */
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
*scu_rev = ast_read32(ast, 0x1207c);
return;
}
}
/* We have a P2A bridge but it's disabled */
drm_info(dev, "P2A bridge disabled, using default configuration\n");
}
static int ast_detect_chip(struct drm_device *dev, bool *need_post)
{
struct ast_device *ast = to_ast_device(dev);
struct pci_dev *pdev = to_pci_dev(dev->dev);
uint32_t jreg, scu_rev;
/*
* If VGA isn't enabled, we need to enable now or subsequent
* access to the scratch registers will fail. We also inform
* our caller that it needs to POST the chip
* (Assumption: VGA not enabled -> need to POST)
*/
if (!ast_is_vga_enabled(dev)) {
ast_enable_vga(dev);
drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
*need_post = true;
} else
*need_post = false;
/* Enable extended register access */
ast_open_key(ast);
ast_enable_mmio(dev);
/* Find out whether P2A works or whether to use device-tree */
ast_detect_config_mode(dev, &scu_rev);
/* Identify chipset */
if (pdev->revision >= 0x50) {
ast->chip = AST2600;
drm_info(dev, "AST 2600 detected\n");
} else if (pdev->revision >= 0x40) {
ast->chip = AST2500;
drm_info(dev, "AST 2500 detected\n");
} else if (pdev->revision >= 0x30) {
ast->chip = AST2400;
drm_info(dev, "AST 2400 detected\n");
} else if (pdev->revision >= 0x20) {
ast->chip = AST2300;
drm_info(dev, "AST 2300 detected\n");
} else if (pdev->revision >= 0x10) {
switch (scu_rev & 0x0300) {
case 0x0200:
ast->chip = AST1100;
drm_info(dev, "AST 1100 detected\n");
break;
case 0x0100:
ast->chip = AST2200;
drm_info(dev, "AST 2200 detected\n");
break;
case 0x0000:
ast->chip = AST2150;
drm_info(dev, "AST 2150 detected\n");
break;
default:
ast->chip = AST2100;
drm_info(dev, "AST 2100 detected\n");
break;
}
ast->vga2_clone = false;
} else {
ast->chip = AST2000;
drm_info(dev, "AST 2000 detected\n");
}
/* Check if we support wide screen */
switch (ast->chip) {
case AST2000:
ast->support_wide_screen = false;
break;
default:
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80))
ast->support_wide_screen = true;
else if (jreg & 0x01)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
if (ast->chip == AST2300 &&
(scu_rev & 0x300) == 0x0) /* ast1300 */
ast->support_wide_screen = true;
if (ast->chip == AST2400 &&
(scu_rev & 0x300) == 0x100) /* ast1400 */
ast->support_wide_screen = true;
if (ast->chip == AST2500 &&
scu_rev == 0x100) /* ast2510 */
ast->support_wide_screen = true;
if (ast->chip == AST2600) /* ast2600 */
ast->support_wide_screen = true;
}
break;
}
/* Check 3rd Tx option (digital output afaik) */
ast->tx_chip_types |= AST_TX_NONE_BIT;
/*
* VGACRA3 Enhanced Color Mode Register, check if DVO is already
* enabled, in that case, assume we have a SIL164 TMDS transmitter
*
* Don't make that assumption if we the chip wasn't enabled and
* is at power-on reset, otherwise we'll incorrectly "detect" a
* SIL164 when there is none.
*/
if (!*need_post) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_types = AST_TX_SIL164_BIT;
}
if ((ast->chip == AST2300) || (ast->chip == AST2400) || (ast->chip == AST2500)) {
/*
* On AST2300 and 2400, look the configuration set by the SoC in
* the SOC scratch register #1 bits 11:8 (interestingly marked
* as "reserved" in the spec)
*/
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg) {
case 0x04:
ast->tx_chip_types = AST_TX_SIL164_BIT;
break;
case 0x08:
ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL);
if (ast->dp501_fw_addr) {
/* backup firmware */
if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
drmm_kfree(dev, ast->dp501_fw_addr);
ast->dp501_fw_addr = NULL;
}
}
fallthrough;
case 0x0c:
ast->tx_chip_types = AST_TX_DP501_BIT;
}
} else if (ast->chip == AST2600) {
if (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, TX_TYPE_MASK) ==
ASTDP_DPMCU_TX) {
ast->tx_chip_types = AST_TX_ASTDP_BIT;
ast_dp_launch(&ast->base);
}
}
/* Print stuff for diagnostic purposes */
if (ast->tx_chip_types & AST_TX_NONE_BIT)
drm_info(dev, "Using analog VGA\n");
if (ast->tx_chip_types & AST_TX_SIL164_BIT)
drm_info(dev, "Using Sil164 TMDS transmitter\n");
if (ast->tx_chip_types & AST_TX_DP501_BIT)
drm_info(dev, "Using DP501 DisplayPort transmitter\n");
if (ast->tx_chip_types & AST_TX_ASTDP_BIT)
drm_info(dev, "Using ASPEED DisplayPort transmitter\n");
return 0;
}
static int ast_get_dram_info(struct drm_device *dev)
{
struct device_node *np = dev->dev->of_node;
struct ast_device *ast = to_ast_device(dev);
uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
uint32_t denum, num, div, ref_pll, dsel;
switch (ast->config_mode) {
case ast_use_dt:
/*
* If some properties are missing, use reasonable
* defaults for AST2400
*/
if (of_property_read_u32(np, "aspeed,mcr-configuration",
&mcr_cfg))
mcr_cfg = 0x00000577;
if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
&mcr_scu_mpll))
mcr_scu_mpll = 0x000050C0;
if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
&mcr_scu_strap))
mcr_scu_strap = 0;
break;
case ast_use_p2a:
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
mcr_cfg = ast_read32(ast, 0x10004);
mcr_scu_mpll = ast_read32(ast, 0x10120);
mcr_scu_strap = ast_read32(ast, 0x10170);
break;
case ast_use_defaults:
default:
ast->dram_bus_width = 16;
ast->dram_type = AST_DRAM_1Gx16;
if (ast->chip == AST2500)
ast->mclk = 800;
else
ast->mclk = 396;
return 0;
}
if (mcr_cfg & 0x40)
ast->dram_bus_width = 16;
else
ast->dram_bus_width = 32;
if (ast->chip == AST2500) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_1Gx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_4Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_8Gx16;
break;
}
} else if (ast->chip == AST2300 || ast->chip == AST2400) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_512Mx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_1Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_4Gx16;
break;
}
} else {
switch (mcr_cfg & 0x0c) {
case 0:
case 4:
ast->dram_type = AST_DRAM_512Mx16;
break;
case 8:
if (mcr_cfg & 0x40)
ast->dram_type = AST_DRAM_1Gx16;
else
ast->dram_type = AST_DRAM_512Mx32;
break;
case 0xc:
ast->dram_type = AST_DRAM_1Gx32;
break;
}
}
if (mcr_scu_strap & 0x2000)
ref_pll = 14318;
else
ref_pll = 12000;
denum = mcr_scu_mpll & 0x1f;
num = (mcr_scu_mpll & 0x3fe0) >> 5;
dsel = (mcr_scu_mpll & 0xc000) >> 14;
switch (dsel) {
case 3:
div = 0x4;
break;
case 2:
case 1:
div = 0x2;
break;
default:
div = 0x1;
break;
}
ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
return 0;
}
/*
* Run this function as part of the HW device cleanup; not
* when the DRM device gets released.
*/
static void ast_device_release(void *data)
{
struct ast_device *ast = data;
/* enable standard VGA decode */
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
}
struct ast_device *ast_device_create(const struct drm_driver *drv,
struct pci_dev *pdev,
unsigned long flags)
{
struct drm_device *dev;
struct ast_device *ast;
bool need_post;
int ret = 0;
ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
if (IS_ERR(ast))
return ast;
dev = &ast->base;
pci_set_drvdata(pdev, dev);
ret = drmm_mutex_init(dev, &ast->ioregs_lock);
if (ret)
return ERR_PTR(ret);
ast->regs = pcim_iomap(pdev, 1, 0);
if (!ast->regs)
return ERR_PTR(-EIO);
/*
* After AST2500, MMIO is enabled by default, and it should be adopted
* to be compatible with Arm.
*/
if (pdev->revision >= 0x40) {
ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
} else if (!(pci_resource_flags(pdev, 2) & IORESOURCE_IO)) {
drm_info(dev, "platform has no IO space, trying MMIO\n");
ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
}
/* "map" IO regs if the above hasn't done so already */
if (!ast->ioregs) {
ast->ioregs = pcim_iomap(pdev, 2, 0);
if (!ast->ioregs)
return ERR_PTR(-EIO);
}
ast_detect_chip(dev, &need_post);
ret = ast_get_dram_info(dev);
if (ret)
return ERR_PTR(ret);
drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n",
ast->mclk, ast->dram_type, ast->dram_bus_width);
if (need_post)
ast_post_gpu(dev);
ret = ast_mm_init(ast);
if (ret)
return ERR_PTR(ret);
/* map reserved buffer */
ast->dp501_fw_buf = NULL;
if (ast->vram_size < pci_resource_len(pdev, 0)) {
ast->dp501_fw_buf = pci_iomap_range(pdev, 0, ast->vram_size, 0);
if (!ast->dp501_fw_buf)
drm_info(dev, "failed to map reserved buffer!\n");
}
ret = ast_mode_config_init(ast);
if (ret)
return ERR_PTR(ret);
ret = devm_add_action_or_reset(dev->dev, ast_device_release, ast);
if (ret)
return ERR_PTR(ret);
return ast;
}