linux-zen-desktop/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h

407 lines
15 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2015-2018 The Linux Foundation. All rights reserved.
*/
#ifndef __DPU_ENCODER_PHYS_H__
#define __DPU_ENCODER_PHYS_H__
#include <drm/drm_writeback.h>
#include <linux/jiffies.h>
#include "dpu_kms.h"
#include "dpu_hw_intf.h"
#include "dpu_hw_wb.h"
#include "dpu_hw_pingpong.h"
#include "dpu_hw_ctl.h"
#include "dpu_hw_top.h"
#include "dpu_encoder.h"
#include "dpu_crtc.h"
#define DPU_ENCODER_NAME_MAX 16
/* wait for at most 2 vsync for lowest refresh rate (24hz) */
#define KICKOFF_TIMEOUT_MS 84
#define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS)
/**
* enum dpu_enc_split_role - Role this physical encoder will play in a
* split-panel configuration, where one panel is master, and others slaves.
* Masters have extra responsibilities, like managing the VBLANK IRQ.
* @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master.
* @ENC_ROLE_MASTER: This encoder is the master of a split panel config.
* @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config.
*/
enum dpu_enc_split_role {
ENC_ROLE_SOLO,
ENC_ROLE_MASTER,
ENC_ROLE_SLAVE,
};
/**
* enum dpu_enc_enable_state - current enabled state of the physical encoder
* @DPU_ENC_DISABLING: Encoder transitioning to disable state
* Events bounding transition are encoder type specific
* @DPU_ENC_DISABLED: Encoder is disabled
* @DPU_ENC_ENABLING: Encoder transitioning to enabled
* Events bounding transition are encoder type specific
* @DPU_ENC_ENABLED: Encoder is enabled
* @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset
* to recover from a previous error
*/
enum dpu_enc_enable_state {
DPU_ENC_DISABLING,
DPU_ENC_DISABLED,
DPU_ENC_ENABLING,
DPU_ENC_ENABLED,
DPU_ENC_ERR_NEEDS_HW_RESET
};
struct dpu_encoder_phys;
/**
* struct dpu_encoder_phys_ops - Interface the physical encoders provide to
* the containing virtual encoder.
* @prepare_commit: MSM Atomic Call, start of atomic commit sequence
* @is_master: Whether this phys_enc is the current master
* encoder. Can be switched at enable time. Based
* on split_role and current mode (CMD/VID).
* @atomic_mode_set: DRM Call. Set a DRM mode.
* This likely caches the mode, for use at enable.
* @enable: DRM Call. Enable a DRM mode.
* @disable: DRM Call. Disable mode.
* @atomic_check: DRM Call. Atomic check new DRM state.
* @destroy: DRM Call. Destroy and release resources.
* @control_vblank_irq Register/Deregister for VBLANK IRQ
* @wait_for_commit_done: Wait for hardware to have flushed the
* current pending frames to hardware
* @wait_for_tx_complete: Wait for hardware to transfer the pixels
* to the panel
* @wait_for_vblank: Wait for VBLANK, for sub-driver internal use
* @prepare_for_kickoff: Do any work necessary prior to a kickoff
* For CMD encoder, may wait for previous tx done
* @handle_post_kickoff: Do any work necessary post-kickoff work
* @trigger_start: Process start event on physical encoder
* @needs_single_flush: Whether encoder slaves need to be flushed
* @irq_control: Handler to enable/disable all the encoder IRQs
* @prepare_idle_pc: phys encoder can update the vsync_enable status
* on idle power collapse prepare
* @restore: Restore all the encoder configs.
* @get_line_count: Obtain current vertical line count
*/
struct dpu_encoder_phys_ops {
void (*prepare_commit)(struct dpu_encoder_phys *encoder);
bool (*is_master)(struct dpu_encoder_phys *encoder);
void (*atomic_mode_set)(struct dpu_encoder_phys *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state);
void (*enable)(struct dpu_encoder_phys *encoder);
void (*disable)(struct dpu_encoder_phys *encoder);
int (*atomic_check)(struct dpu_encoder_phys *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state);
void (*destroy)(struct dpu_encoder_phys *encoder);
int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable);
int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc);
int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc);
int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc);
void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc);
void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc);
void (*trigger_start)(struct dpu_encoder_phys *phys_enc);
bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc);
void (*irq_control)(struct dpu_encoder_phys *phys, bool enable);
void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc);
void (*restore)(struct dpu_encoder_phys *phys);
int (*get_line_count)(struct dpu_encoder_phys *phys);
int (*get_frame_count)(struct dpu_encoder_phys *phys);
void (*prepare_wb_job)(struct dpu_encoder_phys *phys_enc,
struct drm_writeback_job *job);
void (*cleanup_wb_job)(struct dpu_encoder_phys *phys_enc,
struct drm_writeback_job *job);
bool (*is_valid_for_commit)(struct dpu_encoder_phys *phys_enc);
};
/**
* enum dpu_intr_idx - dpu encoder interrupt index
* @INTR_IDX_VSYNC: Vsync interrupt for video mode panel
* @INTR_IDX_PINGPONG: Pingpong done interrupt for cmd mode panel
* @INTR_IDX_UNDERRUN: Underrun interrupt for video and cmd mode panel
* @INTR_IDX_RDPTR: Readpointer done interrupt for cmd mode panel
* @INTR_IDX_WB_DONE: Writeback done interrupt for virtual connector
*/
enum dpu_intr_idx {
INTR_IDX_VSYNC,
INTR_IDX_PINGPONG,
INTR_IDX_UNDERRUN,
INTR_IDX_CTL_START,
INTR_IDX_RDPTR,
INTR_IDX_WB_DONE,
INTR_IDX_MAX,
};
/**
* struct dpu_encoder_phys - physical encoder that drives a single INTF block
* tied to a specific panel / sub-panel. Abstract type, sub-classed by
* phys_vid or phys_cmd for video mode or command mode encs respectively.
* @parent: Pointer to the containing virtual encoder
* @ops: Operations exposed to the virtual encoder
* @parent_ops: Callbacks exposed by the parent to the phys_enc
* @hw_mdptop: Hardware interface to the top registers
* @hw_ctl: Hardware interface to the ctl registers
* @hw_pp: Hardware interface to the ping pong registers
* @hw_intf: Hardware interface to the intf registers
* @hw_wb: Hardware interface to the wb registers
* @dpu_kms: Pointer to the dpu_kms top level
* @cached_mode: DRM mode cached at mode_set time, acted on in enable
* @enabled: Whether the encoder has enabled and running a mode
* @split_role: Role to play in a split-panel configuration
* @intf_mode: Interface mode
* @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes
* @enable_state: Enable state tracking
* @vblank_refcount: Reference count of vblank request
* @vsync_cnt: Vsync count for the physical encoder
* @underrun_cnt: Underrun count for the physical encoder
* @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs
* vs. the number of done/vblank irqs. Should hover
* between 0-2 Incremented when a new kickoff is
* scheduled. Decremented in irq handler
* @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start
* pending.
* @pending_kickoff_wq: Wait queue for blocking until kickoff completes
* @irq: IRQ indices
* @has_intf_te: Interface TE configuration support
*/
struct dpu_encoder_phys {
struct drm_encoder *parent;
struct dpu_encoder_phys_ops ops;
struct dpu_hw_mdp *hw_mdptop;
struct dpu_hw_ctl *hw_ctl;
struct dpu_hw_pingpong *hw_pp;
struct dpu_hw_intf *hw_intf;
struct dpu_hw_wb *hw_wb;
struct dpu_kms *dpu_kms;
struct drm_display_mode cached_mode;
enum dpu_enc_split_role split_role;
enum dpu_intf_mode intf_mode;
spinlock_t *enc_spinlock;
enum dpu_enc_enable_state enable_state;
atomic_t vblank_refcount;
atomic_t vsync_cnt;
atomic_t underrun_cnt;
atomic_t pending_ctlstart_cnt;
atomic_t pending_kickoff_cnt;
wait_queue_head_t pending_kickoff_wq;
int irq[INTR_IDX_MAX];
bool has_intf_te;
};
static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
{
atomic_inc_return(&phys->pending_ctlstart_cnt);
return atomic_inc_return(&phys->pending_kickoff_cnt);
}
/**
* struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command
* mode specific operations
* @base: Baseclass physical encoder structure
* @wbirq_refcount: Reference count of writeback interrupt
* @wb_done_timeout_cnt: number of wb done irq timeout errors
* @wb_cfg: writeback block config to store fb related details
* @wb_conn: backpointer to writeback connector
* @wb_job: backpointer to current writeback job
* @dest: dpu buffer layout for current writeback output buffer
*/
struct dpu_encoder_phys_wb {
struct dpu_encoder_phys base;
atomic_t wbirq_refcount;
int wb_done_timeout_cnt;
struct dpu_hw_wb_cfg wb_cfg;
struct drm_writeback_connector *wb_conn;
struct drm_writeback_job *wb_job;
struct dpu_hw_fmt_layout dest;
};
/**
* struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command
* mode specific operations
* @base: Baseclass physical encoder structure
* @intf_idx: Intf Block index used by this phys encoder
* @stream_sel: Stream selection for multi-stream interfaces
* @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt
* after ctl_start instead of before next frame kickoff
* @pp_timeout_report_cnt: number of pingpong done irq timeout errors
* @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK
* @pending_vblank_wq: Wait queue for blocking until VBLANK received
*/
struct dpu_encoder_phys_cmd {
struct dpu_encoder_phys base;
int stream_sel;
bool serialize_wait4pp;
int pp_timeout_report_cnt;
atomic_t pending_vblank_cnt;
wait_queue_head_t pending_vblank_wq;
};
/**
* struct dpu_enc_phys_init_params - initialization parameters for phys encs
* @dpu_kms: Pointer to the dpu_kms top level
* @parent: Pointer to the containing virtual encoder
* @parent_ops: Callbacks exposed by the parent to the phys_enc
* @split_role: Role to play in a split-panel configuration
* @hw_intf: Hardware interface to the intf registers
* @hw_wb: Hardware interface to the wb registers
* @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes
*/
struct dpu_enc_phys_init_params {
struct dpu_kms *dpu_kms;
struct drm_encoder *parent;
enum dpu_enc_split_role split_role;
struct dpu_hw_intf *hw_intf;
struct dpu_hw_wb *hw_wb;
spinlock_t *enc_spinlock;
};
/**
* dpu_encoder_wait_info - container for passing arguments to irq wait functions
* @wq: wait queue structure
* @atomic_cnt: wait until atomic_cnt equals zero
* @timeout_ms: timeout value in milliseconds
*/
struct dpu_encoder_wait_info {
wait_queue_head_t *wq;
atomic_t *atomic_cnt;
s64 timeout_ms;
};
/**
* dpu_encoder_phys_vid_init - Construct a new video mode physical encoder
* @p: Pointer to init params structure
* Return: Error code or newly allocated encoder
*/
struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
struct dpu_enc_phys_init_params *p);
/**
* dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder
* @p: Pointer to init params structure
* Return: Error code or newly allocated encoder
*/
struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
struct dpu_enc_phys_init_params *p);
/**
* dpu_encoder_phys_wb_init - initialize writeback encoder
* @init: Pointer to init info structure with initialization params
*/
struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
struct dpu_enc_phys_init_params *p);
/**
* dpu_encoder_helper_trigger_start - control start helper function
* This helper function may be optionally specified by physical
* encoders if they require ctl_start triggering.
* @phys_enc: Pointer to physical encoder structure
*/
void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc);
static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
struct dpu_encoder_phys *phys_enc)
{
struct dpu_crtc_state *dpu_cstate;
if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING)
return BLEND_3D_NONE;
dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state);
/* Use merge_3d unless DSC MERGE topology is used */
if (phys_enc->split_role == ENC_ROLE_SOLO &&
dpu_cstate->num_mixers == CRTC_DUAL_MIXERS &&
!dpu_encoder_use_dsc_merge(phys_enc->parent))
return BLEND_3D_H_ROW_INT;
return BLEND_3D_NONE;
}
/**
* dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder
* This helper function is used by physical encoder to get DSC blocks mask
* used for this encoder.
* @phys_enc: Pointer to physical encoder structure
*/
unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc);
/**
* dpu_encoder_helper_split_config - split display configuration helper function
* This helper function may be used by physical encoders to configure
* the split display related registers.
* @phys_enc: Pointer to physical encoder structure
* @interface: enum dpu_intf setting
*/
void dpu_encoder_helper_split_config(
struct dpu_encoder_phys *phys_enc,
enum dpu_intf interface);
/**
* dpu_encoder_helper_report_irq_timeout - utility to report error that irq has
* timed out, including reporting frame error event to crtc and debug dump
* @phys_enc: Pointer to physical encoder structure
* @intr_idx: Failing interrupt index
*/
void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc,
enum dpu_intr_idx intr_idx);
/**
* dpu_encoder_helper_wait_for_irq - utility to wait on an irq.
* note: will call dpu_encoder_helper_wait_for_irq on timeout
* @phys_enc: Pointer to physical encoder structure
* @irq: IRQ index
* @func: IRQ callback to be called in case of timeout
* @wait_info: wait info struct
* @Return: 0 or -ERROR
*/
int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc,
int irq,
void (*func)(void *arg, int irq_idx),
struct dpu_encoder_wait_info *wait_info);
/**
* dpu_encoder_helper_phys_cleanup - helper to cleanup dpu pipeline
* @phys_enc: Pointer to physical encoder structure
*/
void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc);
/**
* dpu_encoder_vblank_callback - Notify virtual encoder of vblank IRQ reception
* @drm_enc: Pointer to drm encoder structure
* @phys_enc: Pointer to physical encoder
* Note: This is called from IRQ handler context.
*/
void dpu_encoder_vblank_callback(struct drm_encoder *drm_enc,
struct dpu_encoder_phys *phy_enc);
/** dpu_encoder_underrun_callback - Notify virtual encoder of underrun IRQ reception
* @drm_enc: Pointer to drm encoder structure
* @phys_enc: Pointer to physical encoder
* Note: This is called from IRQ handler context.
*/
void dpu_encoder_underrun_callback(struct drm_encoder *drm_enc,
struct dpu_encoder_phys *phy_enc);
/** dpu_encoder_frame_done_callback -- Notify virtual encoder that this phys encoder completes last request frame
* @drm_enc: Pointer to drm encoder structure
* @phys_enc: Pointer to physical encoder
* @event: Event to process
*/
void dpu_encoder_frame_done_callback(
struct drm_encoder *drm_enc,
struct dpu_encoder_phys *ready_phys, u32 event);
void dpu_encoder_phys_init(struct dpu_encoder_phys *phys,
struct dpu_enc_phys_init_params *p);
#endif /* __dpu_encoder_phys_H__ */