kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/drivers/iio/adc/ina2xx-adc.c

1105 lines
28 KiB
C
Raw Blame History

/*
* INA2XX Current and Power Monitors
*
* Copyright 2015 Baylibre SAS.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Based on linux/drivers/iio/adc/ad7291.c
* Copyright 2010-2011 Analog Devices Inc.
*
* Based on linux/drivers/hwmon/ina2xx.c
* Copyright 2012 Lothar Felten <l-felten@ti.com>
*
* Licensed under the GPL-2 or later.
*
* IIO driver for INA219-220-226-230-231
*
* Configurable 7-bit I2C slave address from 0x40 to 0x4F
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/sched/task.h>
#include <linux/util_macros.h>
#include <linux/platform_data/ina2xx.h>
/* INA2XX registers definition */
#define INA2XX_CONFIG 0x00
#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */
#define INA2XX_POWER 0x03 /* readonly */
#define INA2XX_CURRENT 0x04 /* readonly */
#define INA2XX_CALIBRATION 0x05
#define INA226_MASK_ENABLE 0x06
#define INA226_CVRF BIT(3)
#define INA2XX_MAX_REGISTERS 8
/* settings - depend on use case */
#define INA219_CONFIG_DEFAULT 0x399F /* PGA=1/8, BRNG=32V */
#define INA219_DEFAULT_IT 532
#define INA219_DEFAULT_BRNG 1 /* 32V */
#define INA219_DEFAULT_PGA 125 /* 1000/8 */
#define INA226_CONFIG_DEFAULT 0x4327
#define INA226_DEFAULT_AVG 4
#define INA226_DEFAULT_IT 1110
#define INA2XX_RSHUNT_DEFAULT 10000
/*
* bit masks for reading the settings in the configuration register
* FIXME: use regmap_fields.
*/
#define INA2XX_MODE_MASK GENMASK(3, 0)
/* Gain for VShunt: 1/8 (default), 1/4, 1/2, 1 */
#define INA219_PGA_MASK GENMASK(12, 11)
#define INA219_SHIFT_PGA(val) ((val) << 11)
/* VBus range: 32V (default), 16V */
#define INA219_BRNG_MASK BIT(13)
#define INA219_SHIFT_BRNG(val) ((val) << 13)
/* Averaging for VBus/VShunt/Power */
#define INA226_AVG_MASK GENMASK(11, 9)
#define INA226_SHIFT_AVG(val) ((val) << 9)
/* Integration time for VBus */
#define INA219_ITB_MASK GENMASK(10, 7)
#define INA219_SHIFT_ITB(val) ((val) << 7)
#define INA226_ITB_MASK GENMASK(8, 6)
#define INA226_SHIFT_ITB(val) ((val) << 6)
/* Integration time for VShunt */
#define INA219_ITS_MASK GENMASK(6, 3)
#define INA219_SHIFT_ITS(val) ((val) << 3)
#define INA226_ITS_MASK GENMASK(5, 3)
#define INA226_SHIFT_ITS(val) ((val) << 3)
/* INA219 Bus voltage register, low bits are flags */
#define INA219_OVF BIT(0)
#define INA219_CNVR BIT(1)
#define INA219_BUS_VOLTAGE_SHIFT 3
/* Cosmetic macro giving the sampling period for a full P=UxI cycle */
#define SAMPLING_PERIOD(c) ((c->int_time_vbus + c->int_time_vshunt) \
* c->avg)
static bool ina2xx_is_writeable_reg(struct device *dev, unsigned int reg)
{
return (reg == INA2XX_CONFIG) || (reg > INA2XX_CURRENT);
}
static bool ina2xx_is_volatile_reg(struct device *dev, unsigned int reg)
{
return (reg != INA2XX_CONFIG);
}
static inline bool is_signed_reg(unsigned int reg)
{
return (reg == INA2XX_SHUNT_VOLTAGE) || (reg == INA2XX_CURRENT);
}
static const struct regmap_config ina2xx_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
.max_register = INA2XX_MAX_REGISTERS,
.writeable_reg = ina2xx_is_writeable_reg,
.volatile_reg = ina2xx_is_volatile_reg,
};
enum ina2xx_ids { ina219, ina226 };
struct ina2xx_config {
const char *name;
u16 config_default;
int calibration_value;
int shunt_voltage_lsb; /* nV */
int bus_voltage_shift; /* position of lsb */
int bus_voltage_lsb; /* uV */
/* fixed relation between current and power lsb, uW/uA */
int power_lsb_factor;
enum ina2xx_ids chip_id;
};
struct ina2xx_chip_info {
struct regmap *regmap;
struct task_struct *task;
const struct ina2xx_config *config;
struct mutex state_lock;
unsigned int shunt_resistor_uohm;
int avg;
int int_time_vbus; /* Bus voltage integration time uS */
int int_time_vshunt; /* Shunt voltage integration time uS */
int range_vbus; /* Bus voltage maximum in V */
int pga_gain_vshunt; /* Shunt voltage PGA gain */
bool allow_async_readout;
/* data buffer needs space for channel data and timestamp */
struct {
u16 chan[4];
u64 ts __aligned(8);
} scan;
};
static const struct ina2xx_config ina2xx_config[] = {
[ina219] = {
.name = "ina219",
.config_default = INA219_CONFIG_DEFAULT,
.calibration_value = 4096,
.shunt_voltage_lsb = 10000,
.bus_voltage_shift = INA219_BUS_VOLTAGE_SHIFT,
.bus_voltage_lsb = 4000,
.power_lsb_factor = 20,
.chip_id = ina219,
},
[ina226] = {
.name = "ina226",
.config_default = INA226_CONFIG_DEFAULT,
.calibration_value = 2048,
.shunt_voltage_lsb = 2500,
.bus_voltage_shift = 0,
.bus_voltage_lsb = 1250,
.power_lsb_factor = 25,
.chip_id = ina226,
},
};
static int ina2xx_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
unsigned int regval;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = regmap_read(chip->regmap, chan->address, &regval);
if (ret)
return ret;
if (is_signed_reg(chan->address))
*val = (s16) regval;
else
*val = regval;
if (chan->address == INA2XX_BUS_VOLTAGE)
*val >>= chip->config->bus_voltage_shift;
return IIO_VAL_INT;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
*val = chip->avg;
return IIO_VAL_INT;
case IIO_CHAN_INFO_INT_TIME:
*val = 0;
if (chan->address == INA2XX_SHUNT_VOLTAGE)
*val2 = chip->int_time_vshunt;
else
*val2 = chip->int_time_vbus;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
/*
* Sample freq is read only, it is a consequence of
* 1/AVG*(CT_bus+CT_shunt).
*/
*val = DIV_ROUND_CLOSEST(1000000, SAMPLING_PERIOD(chip));
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->address) {
case INA2XX_SHUNT_VOLTAGE:
/* processed (mV) = raw * lsb(nV) / 1000000 */
*val = chip->config->shunt_voltage_lsb;
*val2 = 1000000;
return IIO_VAL_FRACTIONAL;
case INA2XX_BUS_VOLTAGE:
/* processed (mV) = raw * lsb (uV) / 1000 */
*val = chip->config->bus_voltage_lsb;
*val2 = 1000;
return IIO_VAL_FRACTIONAL;
case INA2XX_CURRENT:
/*
* processed (mA) = raw * current_lsb (mA)
* current_lsb (mA) = shunt_voltage_lsb (nV) /
* shunt_resistor (uOhm)
*/
*val = chip->config->shunt_voltage_lsb;
*val2 = chip->shunt_resistor_uohm;
return IIO_VAL_FRACTIONAL;
case INA2XX_POWER:
/*
* processed (mW) = raw * power_lsb (mW)
* power_lsb (mW) = power_lsb_factor (mW/mA) *
* current_lsb (mA)
*/
*val = chip->config->power_lsb_factor *
chip->config->shunt_voltage_lsb;
*val2 = chip->shunt_resistor_uohm;
return IIO_VAL_FRACTIONAL;
}
return -EINVAL;
case IIO_CHAN_INFO_HARDWAREGAIN:
switch (chan->address) {
case INA2XX_SHUNT_VOLTAGE:
*val = chip->pga_gain_vshunt;
*val2 = 1000;
return IIO_VAL_FRACTIONAL;
case INA2XX_BUS_VOLTAGE:
*val = chip->range_vbus == 32 ? 1 : 2;
return IIO_VAL_INT;
}
return -EINVAL;
}
return -EINVAL;
}
/*
* Available averaging rates for ina226. The indices correspond with
* the bit values expected by the chip (according to the ina226 datasheet,
* table 3 AVG bit settings, found at
* https://www.ti.com/lit/ds/symlink/ina226.pdf.
*/
static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
static int ina226_set_average(struct ina2xx_chip_info *chip, unsigned int val,
unsigned int *config)
{
int bits;
if (val > 1024 || val < 1)
return -EINVAL;
bits = find_closest(val, ina226_avg_tab,
ARRAY_SIZE(ina226_avg_tab));
chip->avg = ina226_avg_tab[bits];
*config &= ~INA226_AVG_MASK;
*config |= INA226_SHIFT_AVG(bits) & INA226_AVG_MASK;
return 0;
}
/* Conversion times in uS */
static const int ina226_conv_time_tab[] = { 140, 204, 332, 588, 1100,
2116, 4156, 8244 };
static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip,
unsigned int val_us, unsigned int *config)
{
int bits;
if (val_us > 8244 || val_us < 140)
return -EINVAL;
bits = find_closest(val_us, ina226_conv_time_tab,
ARRAY_SIZE(ina226_conv_time_tab));
chip->int_time_vbus = ina226_conv_time_tab[bits];
*config &= ~INA226_ITB_MASK;
*config |= INA226_SHIFT_ITB(bits) & INA226_ITB_MASK;
return 0;
}
static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip,
unsigned int val_us, unsigned int *config)
{
int bits;
if (val_us > 8244 || val_us < 140)
return -EINVAL;
bits = find_closest(val_us, ina226_conv_time_tab,
ARRAY_SIZE(ina226_conv_time_tab));
chip->int_time_vshunt = ina226_conv_time_tab[bits];
*config &= ~INA226_ITS_MASK;
*config |= INA226_SHIFT_ITS(bits) & INA226_ITS_MASK;
return 0;
}
/* Conversion times in uS. */
static const int ina219_conv_time_tab_subsample[] = { 84, 148, 276, 532 };
static const int ina219_conv_time_tab_average[] = { 532, 1060, 2130, 4260,
8510, 17020, 34050, 68100};
static int ina219_lookup_int_time(unsigned int *val_us, int *bits)
{
if (*val_us > 68100 || *val_us < 84)
return -EINVAL;
if (*val_us <= 532) {
*bits = find_closest(*val_us, ina219_conv_time_tab_subsample,
ARRAY_SIZE(ina219_conv_time_tab_subsample));
*val_us = ina219_conv_time_tab_subsample[*bits];
} else {
*bits = find_closest(*val_us, ina219_conv_time_tab_average,
ARRAY_SIZE(ina219_conv_time_tab_average));
*val_us = ina219_conv_time_tab_average[*bits];
*bits |= 0x8;
}
return 0;
}
static int ina219_set_int_time_vbus(struct ina2xx_chip_info *chip,
unsigned int val_us, unsigned int *config)
{
int bits, ret;
unsigned int val_us_best = val_us;
ret = ina219_lookup_int_time(&val_us_best, &bits);
if (ret)
return ret;
chip->int_time_vbus = val_us_best;
*config &= ~INA219_ITB_MASK;
*config |= INA219_SHIFT_ITB(bits) & INA219_ITB_MASK;
return 0;
}
static int ina219_set_int_time_vshunt(struct ina2xx_chip_info *chip,
unsigned int val_us, unsigned int *config)
{
int bits, ret;
unsigned int val_us_best = val_us;
ret = ina219_lookup_int_time(&val_us_best, &bits);
if (ret)
return ret;
chip->int_time_vshunt = val_us_best;
*config &= ~INA219_ITS_MASK;
*config |= INA219_SHIFT_ITS(bits) & INA219_ITS_MASK;
return 0;
}
static const int ina219_vbus_range_tab[] = { 1, 2 };
static int ina219_set_vbus_range_denom(struct ina2xx_chip_info *chip,
unsigned int range,
unsigned int *config)
{
if (range == 1)
chip->range_vbus = 32;
else if (range == 2)
chip->range_vbus = 16;
else
return -EINVAL;
*config &= ~INA219_BRNG_MASK;
*config |= INA219_SHIFT_BRNG(range == 1 ? 1 : 0) & INA219_BRNG_MASK;
return 0;
}
static const int ina219_vshunt_gain_tab[] = { 125, 250, 500, 1000 };
static const int ina219_vshunt_gain_frac[] = {
125, 1000, 250, 1000, 500, 1000, 1000, 1000 };
static int ina219_set_vshunt_pga_gain(struct ina2xx_chip_info *chip,
unsigned int gain,
unsigned int *config)
{
int bits;
if (gain < 125 || gain > 1000)
return -EINVAL;
bits = find_closest(gain, ina219_vshunt_gain_tab,
ARRAY_SIZE(ina219_vshunt_gain_tab));
chip->pga_gain_vshunt = ina219_vshunt_gain_tab[bits];
bits = 3 - bits;
*config &= ~INA219_PGA_MASK;
*config |= INA219_SHIFT_PGA(bits) & INA219_PGA_MASK;
return 0;
}
static int ina2xx_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
switch (chan->address) {
case INA2XX_SHUNT_VOLTAGE:
*type = IIO_VAL_FRACTIONAL;
*length = sizeof(ina219_vshunt_gain_frac) / sizeof(int);
*vals = ina219_vshunt_gain_frac;
return IIO_AVAIL_LIST;
case INA2XX_BUS_VOLTAGE:
*type = IIO_VAL_INT;
*length = sizeof(ina219_vbus_range_tab) / sizeof(int);
*vals = ina219_vbus_range_tab;
return IIO_AVAIL_LIST;
}
}
return -EINVAL;
}
static int ina2xx_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
unsigned int config, tmp;
int ret;
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
mutex_lock(&chip->state_lock);
ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
if (ret)
goto err;
tmp = config;
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
ret = ina226_set_average(chip, val, &tmp);
break;
case IIO_CHAN_INFO_INT_TIME:
if (chip->config->chip_id == ina226) {
if (chan->address == INA2XX_SHUNT_VOLTAGE)
ret = ina226_set_int_time_vshunt(chip, val2,
&tmp);
else
ret = ina226_set_int_time_vbus(chip, val2,
&tmp);
} else {
if (chan->address == INA2XX_SHUNT_VOLTAGE)
ret = ina219_set_int_time_vshunt(chip, val2,
&tmp);
else
ret = ina219_set_int_time_vbus(chip, val2,
&tmp);
}
break;
case IIO_CHAN_INFO_HARDWAREGAIN:
if (chan->address == INA2XX_SHUNT_VOLTAGE)
ret = ina219_set_vshunt_pga_gain(chip, val * 1000 +
val2 / 1000, &tmp);
else
ret = ina219_set_vbus_range_denom(chip, val, &tmp);
break;
default:
ret = -EINVAL;
}
if (!ret && (tmp != config))
ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
err:
mutex_unlock(&chip->state_lock);
return ret;
}
static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
return sysfs_emit(buf, "%d\n", chip->allow_async_readout);
}
static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
bool val;
int ret;
ret = kstrtobool(buf, &val);
if (ret)
return ret;
chip->allow_async_readout = val;
return len;
}
/*
* Calibration register is set to the best value, which eliminates
* truncation errors on calculating current register in hardware.
* According to datasheet (INA 226: eq. 3, INA219: eq. 4) the best values
* are 2048 for ina226 and 4096 for ina219. They are hardcoded as
* calibration_value.
*/
static int ina2xx_set_calibration(struct ina2xx_chip_info *chip)
{
return regmap_write(chip->regmap, INA2XX_CALIBRATION,
chip->config->calibration_value);
}
static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
{
if (val == 0 || val > INT_MAX)
return -EINVAL;
chip->shunt_resistor_uohm = val;
return 0;
}
static ssize_t ina2xx_shunt_resistor_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
int vals[2] = { chip->shunt_resistor_uohm, 1000000 };
return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
}
static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
int val, val_fract, ret;
ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
if (ret)
return ret;
ret = set_shunt_resistor(chip, val * 1000000 + val_fract);
if (ret)
return ret;
return len;
}
#define INA219_CHAN(_type, _index, _address) { \
.type = (_type), \
.address = (_address), \
.indexed = 1, \
.channel = (_index), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = (_index), \
.scan_type = { \
.sign = 'u', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_CPU, \
} \
}
#define INA226_CHAN(_type, _index, _address) { \
.type = (_type), \
.address = (_address), \
.indexed = 1, \
.channel = (_index), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.scan_index = (_index), \
.scan_type = { \
.sign = 'u', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_CPU, \
} \
}
/*
* Sampling Freq is a consequence of the integration times of
* the Voltage channels.
*/
#define INA219_CHAN_VOLTAGE(_index, _address, _shift) { \
.type = IIO_VOLTAGE, \
.address = (_address), \
.indexed = 1, \
.channel = (_index), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_INT_TIME) | \
BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
.info_mask_separate_available = \
BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = (_index), \
.scan_type = { \
.sign = 'u', \
.shift = _shift, \
.realbits = 16 - _shift, \
.storagebits = 16, \
.endianness = IIO_LE, \
} \
}
#define INA226_CHAN_VOLTAGE(_index, _address) { \
.type = IIO_VOLTAGE, \
.address = (_address), \
.indexed = 1, \
.channel = (_index), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_INT_TIME), \
.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.scan_index = (_index), \
.scan_type = { \
.sign = 'u', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
} \
}
static const struct iio_chan_spec ina226_channels[] = {
INA226_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE),
INA226_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE),
INA226_CHAN(IIO_POWER, 2, INA2XX_POWER),
INA226_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
IIO_CHAN_SOFT_TIMESTAMP(4),
};
static const struct iio_chan_spec ina219_channels[] = {
INA219_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE, 0),
INA219_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE, INA219_BUS_VOLTAGE_SHIFT),
INA219_CHAN(IIO_POWER, 2, INA2XX_POWER),
INA219_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
IIO_CHAN_SOFT_TIMESTAMP(4),
};
static int ina2xx_conversion_ready(struct iio_dev *indio_dev)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
int ret;
unsigned int alert;
/*
* Because the timer thread and the chip conversion clock
* are asynchronous, the period difference will eventually
* result in reading V[k-1] again, or skip V[k] at time Tk.
* In order to resync the timer with the conversion process
* we check the ConVersionReadyFlag.
* On hardware that supports using the ALERT pin to toggle a
* GPIO a triggered buffer could be used instead.
* For now, we do an extra read of the MASK_ENABLE register (INA226)
* resp. the BUS_VOLTAGE register (INA219).
*/
if (chip->config->chip_id == ina226) {
ret = regmap_read(chip->regmap,
INA226_MASK_ENABLE, &alert);
alert &= INA226_CVRF;
} else {
ret = regmap_read(chip->regmap,
INA2XX_BUS_VOLTAGE, &alert);
alert &= INA219_CNVR;
}
if (ret < 0)
return ret;
return !!alert;
}
static int ina2xx_work_buffer(struct iio_dev *indio_dev)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
int bit, ret, i = 0;
s64 time;
time = iio_get_time_ns(indio_dev);
/*
* Single register reads: bulk_read will not work with ina226/219
* as there is no auto-increment of the register pointer.
*/
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
unsigned int val;
ret = regmap_read(chip->regmap,
INA2XX_SHUNT_VOLTAGE + bit, &val);
if (ret < 0)
return ret;
chip->scan.chan[i++] = val;
}
iio_push_to_buffers_with_timestamp(indio_dev, &chip->scan, time);
return 0;
};
static int ina2xx_capture_thread(void *data)
{
struct iio_dev *indio_dev = data;
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
int sampling_us = SAMPLING_PERIOD(chip);
int ret;
struct timespec64 next, now, delta;
s64 delay_us;
/*
* Poll a bit faster than the chip internal Fs, in case
* we wish to sync with the conversion ready flag.
*/
if (!chip->allow_async_readout)
sampling_us -= 200;
ktime_get_ts64(&next);
do {
while (!chip->allow_async_readout) {
ret = ina2xx_conversion_ready(indio_dev);
if (ret < 0)
return ret;
/*
* If the conversion was not yet finished,
* reset the reference timestamp.
*/
if (ret == 0)
ktime_get_ts64(&next);
else
break;
}
ret = ina2xx_work_buffer(indio_dev);
if (ret < 0)
return ret;
ktime_get_ts64(&now);
/*
* Advance the timestamp for the next poll by one sampling
* interval, and sleep for the remainder (next - now)
* In case "next" has already passed, the interval is added
* multiple times, i.e. samples are dropped.
*/
do {
timespec64_add_ns(&next, 1000 * sampling_us);
delta = timespec64_sub(next, now);
delay_us = div_s64(timespec64_to_ns(&delta), 1000);
} while (delay_us <= 0);
usleep_range(delay_us, (delay_us * 3) >> 1);
} while (!kthread_should_stop());
return 0;
}
static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
unsigned int sampling_us = SAMPLING_PERIOD(chip);
struct task_struct *task;
dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
(unsigned int)(*indio_dev->active_scan_mask),
1000000 / sampling_us, chip->avg);
dev_dbg(&indio_dev->dev, "Expected work period: %u us\n", sampling_us);
dev_dbg(&indio_dev->dev, "Async readout mode: %d\n",
chip->allow_async_readout);
task = kthread_run(ina2xx_capture_thread, (void *)indio_dev,
"%s:%d-%uus", indio_dev->name,
iio_device_id(indio_dev),
sampling_us);
if (IS_ERR(task))
return PTR_ERR(task);
chip->task = task;
return 0;
}
static int ina2xx_buffer_disable(struct iio_dev *indio_dev)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
if (chip->task) {
kthread_stop(chip->task);
chip->task = NULL;
}
return 0;
}
static const struct iio_buffer_setup_ops ina2xx_setup_ops = {
.postenable = &ina2xx_buffer_enable,
.predisable = &ina2xx_buffer_disable,
};
static int ina2xx_debug_reg(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval, unsigned *readval)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
if (!readval)
return regmap_write(chip->regmap, reg, writeval);
return regmap_read(chip->regmap, reg, readval);
}
/* Possible integration times for vshunt and vbus */
static IIO_CONST_ATTR_NAMED(ina219_integration_time_available,
integration_time_available,
"0.000084 0.000148 0.000276 0.000532 0.001060 0.002130 0.004260 0.008510 0.017020 0.034050 0.068100");
static IIO_CONST_ATTR_NAMED(ina226_integration_time_available,
integration_time_available,
"0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
ina2xx_allow_async_readout_show,
ina2xx_allow_async_readout_store, 0);
static IIO_DEVICE_ATTR(in_shunt_resistor, S_IRUGO | S_IWUSR,
ina2xx_shunt_resistor_show,
ina2xx_shunt_resistor_store, 0);
static struct attribute *ina219_attributes[] = {
&iio_dev_attr_in_allow_async_readout.dev_attr.attr,
&iio_const_attr_ina219_integration_time_available.dev_attr.attr,
&iio_dev_attr_in_shunt_resistor.dev_attr.attr,
NULL,
};
static struct attribute *ina226_attributes[] = {
&iio_dev_attr_in_allow_async_readout.dev_attr.attr,
&iio_const_attr_ina226_integration_time_available.dev_attr.attr,
&iio_dev_attr_in_shunt_resistor.dev_attr.attr,
NULL,
};
static const struct attribute_group ina219_attribute_group = {
.attrs = ina219_attributes,
};
static const struct attribute_group ina226_attribute_group = {
.attrs = ina226_attributes,
};
static const struct iio_info ina219_info = {
.attrs = &ina219_attribute_group,
.read_raw = ina2xx_read_raw,
.read_avail = ina2xx_read_avail,
.write_raw = ina2xx_write_raw,
.debugfs_reg_access = ina2xx_debug_reg,
};
static const struct iio_info ina226_info = {
.attrs = &ina226_attribute_group,
.read_raw = ina2xx_read_raw,
.write_raw = ina2xx_write_raw,
.debugfs_reg_access = ina2xx_debug_reg,
};
/* Initialize the configuration and calibration registers. */
static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
{
int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
if (ret)
return ret;
return ina2xx_set_calibration(chip);
}
static int ina2xx_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct ina2xx_chip_info *chip;
struct iio_dev *indio_dev;
unsigned int val;
enum ina2xx_ids type;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
if (!indio_dev)
return -ENOMEM;
chip = iio_priv(indio_dev);
/* This is only used for device removal purposes. */
i2c_set_clientdata(client, indio_dev);
chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
if (IS_ERR(chip->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(chip->regmap);
}
if (client->dev.of_node)
type = (uintptr_t)of_device_get_match_data(&client->dev);
else
type = id->driver_data;
chip->config = &ina2xx_config[type];
mutex_init(&chip->state_lock);
if (of_property_read_u32(client->dev.of_node,
"shunt-resistor", &val) < 0) {
struct ina2xx_platform_data *pdata =
dev_get_platdata(&client->dev);
if (pdata)
val = pdata->shunt_uohms;
else
val = INA2XX_RSHUNT_DEFAULT;
}
ret = set_shunt_resistor(chip, val);
if (ret)
return ret;
/* Patch the current config register with default. */
val = chip->config->config_default;
if (type == ina226) {
ina226_set_average(chip, INA226_DEFAULT_AVG, &val);
ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val);
ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val);
} else {
chip->avg = 1;
ina219_set_int_time_vbus(chip, INA219_DEFAULT_IT, &val);
ina219_set_int_time_vshunt(chip, INA219_DEFAULT_IT, &val);
ina219_set_vbus_range_denom(chip, INA219_DEFAULT_BRNG, &val);
ina219_set_vshunt_pga_gain(chip, INA219_DEFAULT_PGA, &val);
}
ret = ina2xx_init(chip, val);
if (ret) {
dev_err(&client->dev, "error configuring the device\n");
return ret;
}
indio_dev->modes = INDIO_DIRECT_MODE;
if (type == ina226) {
indio_dev->channels = ina226_channels;
indio_dev->num_channels = ARRAY_SIZE(ina226_channels);
indio_dev->info = &ina226_info;
} else {
indio_dev->channels = ina219_channels;
indio_dev->num_channels = ARRAY_SIZE(ina219_channels);
indio_dev->info = &ina219_info;
}
indio_dev->name = id ? id->name : chip->config->name;
ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
&ina2xx_setup_ops);
if (ret)
return ret;
return iio_device_register(indio_dev);
}
static void ina2xx_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
int ret;
iio_device_unregister(indio_dev);
/* Powerdown */
ret = regmap_update_bits(chip->regmap, INA2XX_CONFIG,
INA2XX_MODE_MASK, 0);
if (ret)
dev_warn(&client->dev, "Failed to power down device (%pe)\n",
ERR_PTR(ret));
}
static const struct i2c_device_id ina2xx_id[] = {
{"ina219", ina219},
{"ina220", ina219},
{"ina226", ina226},
{"ina230", ina226},
{"ina231", ina226},
{}
};
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
static const struct of_device_id ina2xx_of_match[] = {
{
.compatible = "ti,ina219",
.data = (void *)ina219
},
{
.compatible = "ti,ina220",
.data = (void *)ina219
},
{
.compatible = "ti,ina226",
.data = (void *)ina226
},
{
.compatible = "ti,ina230",
.data = (void *)ina226
},
{
.compatible = "ti,ina231",
.data = (void *)ina226
},
{},
};
MODULE_DEVICE_TABLE(of, ina2xx_of_match);
static struct i2c_driver ina2xx_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = ina2xx_of_match,
},
.probe = ina2xx_probe,
.remove = ina2xx_remove,
.id_table = ina2xx_id,
};
module_i2c_driver(ina2xx_driver);
MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");
MODULE_DESCRIPTION("Texas Instruments INA2XX ADC driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink