kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/drivers/input/serio/ps2-gpio.c

508 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* GPIO based serio bus driver for bit banging the PS/2 protocol
*
* Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
*/
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/serio.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/preempt.h>
#include <linux/property.h>
#include <linux/of.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
#include <linux/timekeeping.h>
#define DRIVER_NAME "ps2-gpio"
#define PS2_MODE_RX 0
#define PS2_MODE_TX 1
#define PS2_START_BIT 0
#define PS2_DATA_BIT0 1
#define PS2_DATA_BIT1 2
#define PS2_DATA_BIT2 3
#define PS2_DATA_BIT3 4
#define PS2_DATA_BIT4 5
#define PS2_DATA_BIT5 6
#define PS2_DATA_BIT6 7
#define PS2_DATA_BIT7 8
#define PS2_PARITY_BIT 9
#define PS2_STOP_BIT 10
#define PS2_ACK_BIT 11
#define PS2_DEV_RET_ACK 0xfa
#define PS2_DEV_RET_NACK 0xfe
#define PS2_CMD_RESEND 0xfe
/*
* The PS2 protocol specifies a clock frequency between 10kHz and 16.7kHz,
* therefore the maximal interrupt interval should be 100us and the minimum
* interrupt interval should be ~60us. Let's allow +/- 20us for frequency
* deviations and interrupt latency.
*
* The data line must be samples after ~30us to 50us after the falling edge,
* since the device updates the data line at the rising edge.
*
* ___ ______ ______ ______ ___
* \ / \ / \ / \ /
* \ / \ / \ / \ /
* \______/ \______/ \______/ \______/
*
* |-----------------| |--------|
* 60us/100us 30us/50us
*/
#define PS2_CLK_FREQ_MIN_HZ 10000
#define PS2_CLK_FREQ_MAX_HZ 16700
#define PS2_CLK_MIN_INTERVAL_US ((1000 * 1000) / PS2_CLK_FREQ_MAX_HZ)
#define PS2_CLK_MAX_INTERVAL_US ((1000 * 1000) / PS2_CLK_FREQ_MIN_HZ)
#define PS2_IRQ_MIN_INTERVAL_US (PS2_CLK_MIN_INTERVAL_US - 20)
#define PS2_IRQ_MAX_INTERVAL_US (PS2_CLK_MAX_INTERVAL_US + 20)
struct ps2_gpio_data {
struct device *dev;
struct serio *serio;
unsigned char mode;
struct gpio_desc *gpio_clk;
struct gpio_desc *gpio_data;
bool write_enable;
int irq;
ktime_t t_irq_now;
ktime_t t_irq_last;
struct {
unsigned char cnt;
unsigned char byte;
} rx;
struct {
unsigned char cnt;
unsigned char byte;
ktime_t t_xfer_start;
ktime_t t_xfer_end;
struct completion complete;
struct mutex mutex;
struct delayed_work work;
} tx;
};
static int ps2_gpio_open(struct serio *serio)
{
struct ps2_gpio_data *drvdata = serio->port_data;
drvdata->t_irq_last = 0;
drvdata->tx.t_xfer_end = 0;
enable_irq(drvdata->irq);
return 0;
}
static void ps2_gpio_close(struct serio *serio)
{
struct ps2_gpio_data *drvdata = serio->port_data;
flush_delayed_work(&drvdata->tx.work);
disable_irq(drvdata->irq);
}
static int __ps2_gpio_write(struct serio *serio, unsigned char val)
{
struct ps2_gpio_data *drvdata = serio->port_data;
disable_irq_nosync(drvdata->irq);
gpiod_direction_output(drvdata->gpio_clk, 0);
drvdata->mode = PS2_MODE_TX;
drvdata->tx.byte = val;
schedule_delayed_work(&drvdata->tx.work, usecs_to_jiffies(200));
return 0;
}
static int ps2_gpio_write(struct serio *serio, unsigned char val)
{
struct ps2_gpio_data *drvdata = serio->port_data;
int ret = 0;
if (in_task()) {
mutex_lock(&drvdata->tx.mutex);
__ps2_gpio_write(serio, val);
if (!wait_for_completion_timeout(&drvdata->tx.complete,
msecs_to_jiffies(10000)))
ret = SERIO_TIMEOUT;
mutex_unlock(&drvdata->tx.mutex);
} else {
__ps2_gpio_write(serio, val);
}
return ret;
}
static void ps2_gpio_tx_work_fn(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct ps2_gpio_data *drvdata = container_of(dwork,
struct ps2_gpio_data,
tx.work);
drvdata->tx.t_xfer_start = ktime_get();
enable_irq(drvdata->irq);
gpiod_direction_output(drvdata->gpio_data, 0);
gpiod_direction_input(drvdata->gpio_clk);
}
static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
{
unsigned char byte, cnt;
int data;
int rxflags = 0;
s64 us_delta;
byte = drvdata->rx.byte;
cnt = drvdata->rx.cnt;
drvdata->t_irq_now = ktime_get();
/*
* We need to consider spurious interrupts happening right after
* a TX xfer finished.
*/
us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->tx.t_xfer_end);
if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US))
goto end;
us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt) {
dev_err(drvdata->dev,
"RX: timeout, probably we missed an interrupt\n");
goto err;
} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
/* Ignore spurious IRQs. */
goto end;
}
drvdata->t_irq_last = drvdata->t_irq_now;
data = gpiod_get_value(drvdata->gpio_data);
if (unlikely(data < 0)) {
dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
data);
goto err;
}
switch (cnt) {
case PS2_START_BIT:
/* start bit should be low */
if (unlikely(data)) {
dev_err(drvdata->dev, "RX: start bit should be low\n");
goto err;
}
break;
case PS2_DATA_BIT0:
case PS2_DATA_BIT1:
case PS2_DATA_BIT2:
case PS2_DATA_BIT3:
case PS2_DATA_BIT4:
case PS2_DATA_BIT5:
case PS2_DATA_BIT6:
case PS2_DATA_BIT7:
/* processing data bits */
if (data)
byte |= (data << (cnt - 1));
break;
case PS2_PARITY_BIT:
/* check odd parity */
if (!((hweight8(byte) & 1) ^ data)) {
rxflags |= SERIO_PARITY;
dev_warn(drvdata->dev, "RX: parity error\n");
if (!drvdata->write_enable)
goto err;
}
break;
case PS2_STOP_BIT:
/* stop bit should be high */
if (unlikely(!data)) {
dev_err(drvdata->dev, "RX: stop bit should be high\n");
goto err;
}
/*
* Do not send spurious ACK's and NACK's when write fn is
* not provided.
*/
if (!drvdata->write_enable) {
if (byte == PS2_DEV_RET_NACK)
goto err;
else if (byte == PS2_DEV_RET_ACK)
break;
}
serio_interrupt(drvdata->serio, byte, rxflags);
dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
cnt = byte = 0;
goto end; /* success */
default:
dev_err(drvdata->dev, "RX: got out of sync with the device\n");
goto err;
}
cnt++;
goto end; /* success */
err:
cnt = byte = 0;
__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
end:
drvdata->rx.cnt = cnt;
drvdata->rx.byte = byte;
return IRQ_HANDLED;
}
static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
{
unsigned char byte, cnt;
int data;
s64 us_delta;
cnt = drvdata->tx.cnt;
byte = drvdata->tx.byte;
drvdata->t_irq_now = ktime_get();
/*
* There might be pending IRQs since we disabled IRQs in
* __ps2_gpio_write(). We can expect at least one clock period until
* the device generates the first falling edge after releasing the
* clock line.
*/
us_delta = ktime_us_delta(drvdata->t_irq_now,
drvdata->tx.t_xfer_start);
if (unlikely(us_delta < PS2_CLK_MIN_INTERVAL_US))
goto end;
us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt > 1) {
dev_err(drvdata->dev,
"TX: timeout, probably we missed an interrupt\n");
goto err;
} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
/* Ignore spurious IRQs. */
goto end;
}
drvdata->t_irq_last = drvdata->t_irq_now;
switch (cnt) {
case PS2_START_BIT:
/* should never happen */
dev_err(drvdata->dev,
"TX: start bit should have been sent already\n");
goto err;
case PS2_DATA_BIT0:
case PS2_DATA_BIT1:
case PS2_DATA_BIT2:
case PS2_DATA_BIT3:
case PS2_DATA_BIT4:
case PS2_DATA_BIT5:
case PS2_DATA_BIT6:
case PS2_DATA_BIT7:
data = byte & BIT(cnt - 1);
gpiod_set_value(drvdata->gpio_data, data);
break;
case PS2_PARITY_BIT:
/* do odd parity */
data = !(hweight8(byte) & 1);
gpiod_set_value(drvdata->gpio_data, data);
break;
case PS2_STOP_BIT:
/* release data line to generate stop bit */
gpiod_direction_input(drvdata->gpio_data);
break;
case PS2_ACK_BIT:
data = gpiod_get_value(drvdata->gpio_data);
if (data) {
dev_warn(drvdata->dev, "TX: received NACK, retry\n");
goto err;
}
drvdata->tx.t_xfer_end = ktime_get();
drvdata->mode = PS2_MODE_RX;
complete(&drvdata->tx.complete);
cnt = 1;
goto end; /* success */
default:
/*
* Probably we missed the stop bit. Therefore we release data
* line and try again.
*/
gpiod_direction_input(drvdata->gpio_data);
dev_err(drvdata->dev, "TX: got out of sync with the device\n");
goto err;
}
cnt++;
goto end; /* success */
err:
cnt = 1;
gpiod_direction_input(drvdata->gpio_data);
__ps2_gpio_write(drvdata->serio, drvdata->tx.byte);
end:
drvdata->tx.cnt = cnt;
return IRQ_HANDLED;
}
static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
{
struct ps2_gpio_data *drvdata = dev_id;
return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
ps2_gpio_irq_rx(drvdata);
}
static int ps2_gpio_get_props(struct device *dev,
struct ps2_gpio_data *drvdata)
{
enum gpiod_flags gflags;
/* Enforce open drain, since this is required by the PS/2 bus. */
gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN;
drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags);
if (IS_ERR(drvdata->gpio_data)) {
dev_err(dev, "failed to request data gpio: %ld",
PTR_ERR(drvdata->gpio_data));
return PTR_ERR(drvdata->gpio_data);
}
drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags);
if (IS_ERR(drvdata->gpio_clk)) {
dev_err(dev, "failed to request clock gpio: %ld",
PTR_ERR(drvdata->gpio_clk));
return PTR_ERR(drvdata->gpio_clk);
}
drvdata->write_enable = device_property_read_bool(dev,
"write-enable");
return 0;
}
static int ps2_gpio_probe(struct platform_device *pdev)
{
struct ps2_gpio_data *drvdata;
struct serio *serio;
struct device *dev = &pdev->dev;
int error;
drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL);
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!drvdata || !serio) {
error = -ENOMEM;
goto err_free_serio;
}
error = ps2_gpio_get_props(dev, drvdata);
if (error)
goto err_free_serio;
if (gpiod_cansleep(drvdata->gpio_data) ||
gpiod_cansleep(drvdata->gpio_clk)) {
dev_err(dev, "GPIO data or clk are connected via slow bus\n");
error = -EINVAL;
goto err_free_serio;
}
drvdata->irq = platform_get_irq(pdev, 0);
if (drvdata->irq < 0) {
error = drvdata->irq;
goto err_free_serio;
}
error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
IRQF_NO_THREAD, DRIVER_NAME, drvdata);
if (error) {
dev_err(dev, "failed to request irq %d: %d\n",
drvdata->irq, error);
goto err_free_serio;
}
/* Keep irq disabled until serio->open is called. */
disable_irq(drvdata->irq);
serio->id.type = SERIO_8042;
serio->open = ps2_gpio_open;
serio->close = ps2_gpio_close;
/*
* Write can be enabled in platform/dt data, but possibly it will not
* work because of the tough timings.
*/
serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
serio->port_data = drvdata;
serio->dev.parent = dev;
strscpy(serio->name, dev_name(dev), sizeof(serio->name));
strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
drvdata->serio = serio;
drvdata->dev = dev;
drvdata->mode = PS2_MODE_RX;
/*
* Tx count always starts at 1, as the start bit is sent implicitly by
* host-to-device communication initialization.
*/
drvdata->tx.cnt = 1;
INIT_DELAYED_WORK(&drvdata->tx.work, ps2_gpio_tx_work_fn);
init_completion(&drvdata->tx.complete);
mutex_init(&drvdata->tx.mutex);
serio_register_port(serio);
platform_set_drvdata(pdev, drvdata);
return 0; /* success */
err_free_serio:
kfree(serio);
return error;
}
static int ps2_gpio_remove(struct platform_device *pdev)
{
struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);
serio_unregister_port(drvdata->serio);
return 0;
}
#if defined(CONFIG_OF)
static const struct of_device_id ps2_gpio_match[] = {
{ .compatible = "ps2-gpio", },
{ },
};
MODULE_DEVICE_TABLE(of, ps2_gpio_match);
#endif
static struct platform_driver ps2_gpio_driver = {
.probe = ps2_gpio_probe,
.remove = ps2_gpio_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(ps2_gpio_match),
},
};
module_platform_driver(ps2_gpio_driver);
MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
MODULE_DESCRIPTION("GPIO PS2 driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink