1383 lines
38 KiB
C
1383 lines
38 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
Driver for Philips tda1004xh OFDM Demodulator
|
|
|
|
(c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
|
|
|
|
|
|
*/
|
|
/*
|
|
* This driver needs external firmware. Please use the commands
|
|
* "<kerneldir>/scripts/get_dvb_firmware tda10045",
|
|
* "<kerneldir>/scripts/get_dvb_firmware tda10046" to
|
|
* download/extract them, and then copy them to /usr/lib/hotplug/firmware
|
|
* or /lib/firmware (depending on configuration of firmware hotplug).
|
|
*/
|
|
#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
|
|
#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "tda1004x.h"
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "tda1004x: " args); \
|
|
} while (0)
|
|
|
|
#define TDA1004X_CHIPID 0x00
|
|
#define TDA1004X_AUTO 0x01
|
|
#define TDA1004X_IN_CONF1 0x02
|
|
#define TDA1004X_IN_CONF2 0x03
|
|
#define TDA1004X_OUT_CONF1 0x04
|
|
#define TDA1004X_OUT_CONF2 0x05
|
|
#define TDA1004X_STATUS_CD 0x06
|
|
#define TDA1004X_CONFC4 0x07
|
|
#define TDA1004X_DSSPARE2 0x0C
|
|
#define TDA10045H_CODE_IN 0x0D
|
|
#define TDA10045H_FWPAGE 0x0E
|
|
#define TDA1004X_SCAN_CPT 0x10
|
|
#define TDA1004X_DSP_CMD 0x11
|
|
#define TDA1004X_DSP_ARG 0x12
|
|
#define TDA1004X_DSP_DATA1 0x13
|
|
#define TDA1004X_DSP_DATA2 0x14
|
|
#define TDA1004X_CONFADC1 0x15
|
|
#define TDA1004X_CONFC1 0x16
|
|
#define TDA10045H_S_AGC 0x1a
|
|
#define TDA10046H_AGC_TUN_LEVEL 0x1a
|
|
#define TDA1004X_SNR 0x1c
|
|
#define TDA1004X_CONF_TS1 0x1e
|
|
#define TDA1004X_CONF_TS2 0x1f
|
|
#define TDA1004X_CBER_RESET 0x20
|
|
#define TDA1004X_CBER_MSB 0x21
|
|
#define TDA1004X_CBER_LSB 0x22
|
|
#define TDA1004X_CVBER_LUT 0x23
|
|
#define TDA1004X_VBER_MSB 0x24
|
|
#define TDA1004X_VBER_MID 0x25
|
|
#define TDA1004X_VBER_LSB 0x26
|
|
#define TDA1004X_UNCOR 0x27
|
|
|
|
#define TDA10045H_CONFPLL_P 0x2D
|
|
#define TDA10045H_CONFPLL_M_MSB 0x2E
|
|
#define TDA10045H_CONFPLL_M_LSB 0x2F
|
|
#define TDA10045H_CONFPLL_N 0x30
|
|
|
|
#define TDA10046H_CONFPLL1 0x2D
|
|
#define TDA10046H_CONFPLL2 0x2F
|
|
#define TDA10046H_CONFPLL3 0x30
|
|
#define TDA10046H_TIME_WREF1 0x31
|
|
#define TDA10046H_TIME_WREF2 0x32
|
|
#define TDA10046H_TIME_WREF3 0x33
|
|
#define TDA10046H_TIME_WREF4 0x34
|
|
#define TDA10046H_TIME_WREF5 0x35
|
|
|
|
#define TDA10045H_UNSURW_MSB 0x31
|
|
#define TDA10045H_UNSURW_LSB 0x32
|
|
#define TDA10045H_WREF_MSB 0x33
|
|
#define TDA10045H_WREF_MID 0x34
|
|
#define TDA10045H_WREF_LSB 0x35
|
|
#define TDA10045H_MUXOUT 0x36
|
|
#define TDA1004X_CONFADC2 0x37
|
|
|
|
#define TDA10045H_IOFFSET 0x38
|
|
|
|
#define TDA10046H_CONF_TRISTATE1 0x3B
|
|
#define TDA10046H_CONF_TRISTATE2 0x3C
|
|
#define TDA10046H_CONF_POLARITY 0x3D
|
|
#define TDA10046H_FREQ_OFFSET 0x3E
|
|
#define TDA10046H_GPIO_OUT_SEL 0x41
|
|
#define TDA10046H_GPIO_SELECT 0x42
|
|
#define TDA10046H_AGC_CONF 0x43
|
|
#define TDA10046H_AGC_THR 0x44
|
|
#define TDA10046H_AGC_RENORM 0x45
|
|
#define TDA10046H_AGC_GAINS 0x46
|
|
#define TDA10046H_AGC_TUN_MIN 0x47
|
|
#define TDA10046H_AGC_TUN_MAX 0x48
|
|
#define TDA10046H_AGC_IF_MIN 0x49
|
|
#define TDA10046H_AGC_IF_MAX 0x4A
|
|
|
|
#define TDA10046H_FREQ_PHY2_MSB 0x4D
|
|
#define TDA10046H_FREQ_PHY2_LSB 0x4E
|
|
|
|
#define TDA10046H_CVBER_CTRL 0x4F
|
|
#define TDA10046H_AGC_IF_LEVEL 0x52
|
|
#define TDA10046H_CODE_CPT 0x57
|
|
#define TDA10046H_CODE_IN 0x58
|
|
|
|
|
|
static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)
|
|
{
|
|
int ret;
|
|
u8 buf[] = { reg, data };
|
|
struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
|
|
|
|
dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data);
|
|
|
|
msg.addr = state->config->demod_address;
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (ret != 1)
|
|
dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
|
|
__func__, reg, data, ret);
|
|
|
|
dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
|
|
reg, data, ret);
|
|
return (ret != 1) ? -1 : 0;
|
|
}
|
|
|
|
static int tda1004x_read_byte(struct tda1004x_state *state, int reg)
|
|
{
|
|
int ret;
|
|
u8 b0[] = { reg };
|
|
u8 b1[] = { 0 };
|
|
struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
|
|
{ .flags = I2C_M_RD, .buf = b1, .len = 1 }};
|
|
|
|
dprintk("%s: reg=0x%x\n", __func__, reg);
|
|
|
|
msg[0].addr = state->config->demod_address;
|
|
msg[1].addr = state->config->demod_address;
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (ret != 2) {
|
|
dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,
|
|
ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,
|
|
reg, b1[0], ret);
|
|
return b1[0];
|
|
}
|
|
|
|
static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)
|
|
{
|
|
int val;
|
|
dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg,
|
|
mask, data);
|
|
|
|
// read a byte and check
|
|
val = tda1004x_read_byte(state, reg);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
// mask if off
|
|
val = val & ~mask;
|
|
val |= data & 0xff;
|
|
|
|
// write it out again
|
|
return tda1004x_write_byteI(state, reg, val);
|
|
}
|
|
|
|
static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)
|
|
{
|
|
int i;
|
|
int result;
|
|
|
|
dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len);
|
|
|
|
result = 0;
|
|
for (i = 0; i < len; i++) {
|
|
result = tda1004x_write_byteI(state, reg + i, buf[i]);
|
|
if (result != 0)
|
|
break;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
|
|
{
|
|
int result;
|
|
dprintk("%s\n", __func__);
|
|
|
|
result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
|
|
msleep(20);
|
|
return result;
|
|
}
|
|
|
|
static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)
|
|
{
|
|
dprintk("%s\n", __func__);
|
|
|
|
return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);
|
|
}
|
|
|
|
static int tda10045h_set_bandwidth(struct tda1004x_state *state,
|
|
u32 bandwidth)
|
|
{
|
|
static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };
|
|
static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };
|
|
static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };
|
|
|
|
switch (bandwidth) {
|
|
case 6000000:
|
|
tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
|
|
break;
|
|
|
|
case 7000000:
|
|
tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
|
|
break;
|
|
|
|
case 8000000:
|
|
tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10046h_set_bandwidth(struct tda1004x_state *state,
|
|
u32 bandwidth)
|
|
{
|
|
static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
|
|
static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
|
|
static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
|
|
|
|
static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
|
|
static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
|
|
static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
|
|
int tda10046_clk53m;
|
|
|
|
if ((state->config->if_freq == TDA10046_FREQ_045) ||
|
|
(state->config->if_freq == TDA10046_FREQ_052))
|
|
tda10046_clk53m = 0;
|
|
else
|
|
tda10046_clk53m = 1;
|
|
switch (bandwidth) {
|
|
case 6000000:
|
|
if (tda10046_clk53m)
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
|
|
sizeof(bandwidth_6mhz_53M));
|
|
else
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
|
|
sizeof(bandwidth_6mhz_48M));
|
|
if (state->config->if_freq == TDA10046_FREQ_045) {
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
|
|
}
|
|
break;
|
|
|
|
case 7000000:
|
|
if (tda10046_clk53m)
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
|
|
sizeof(bandwidth_7mhz_53M));
|
|
else
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
|
|
sizeof(bandwidth_7mhz_48M));
|
|
if (state->config->if_freq == TDA10046_FREQ_045) {
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
|
|
}
|
|
break;
|
|
|
|
case 8000000:
|
|
if (tda10046_clk53m)
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
|
|
sizeof(bandwidth_8mhz_53M));
|
|
else
|
|
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
|
|
sizeof(bandwidth_8mhz_48M));
|
|
if (state->config->if_freq == TDA10046_FREQ_045) {
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_do_upload(struct tda1004x_state *state,
|
|
const unsigned char *mem, unsigned int len,
|
|
u8 dspCodeCounterReg, u8 dspCodeInReg)
|
|
{
|
|
u8 buf[65];
|
|
struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
|
|
int tx_size;
|
|
int pos = 0;
|
|
|
|
/* clear code counter */
|
|
tda1004x_write_byteI(state, dspCodeCounterReg, 0);
|
|
fw_msg.addr = state->config->demod_address;
|
|
|
|
i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
|
|
buf[0] = dspCodeInReg;
|
|
while (pos != len) {
|
|
// work out how much to send this time
|
|
tx_size = len - pos;
|
|
if (tx_size > 0x10)
|
|
tx_size = 0x10;
|
|
|
|
// send the chunk
|
|
memcpy(buf + 1, mem + pos, tx_size);
|
|
fw_msg.len = tx_size + 1;
|
|
if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
|
|
printk(KERN_ERR "tda1004x: Error during firmware upload\n");
|
|
i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
|
|
return -EIO;
|
|
}
|
|
pos += tx_size;
|
|
|
|
dprintk("%s: fw_pos=0x%x\n", __func__, pos);
|
|
}
|
|
i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
|
|
|
|
/* give the DSP a chance to settle 03/10/05 Hac */
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_check_upload_ok(struct tda1004x_state *state)
|
|
{
|
|
u8 data1, data2;
|
|
unsigned long timeout;
|
|
|
|
if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
|
|
timeout = jiffies + 2 * HZ;
|
|
while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
|
|
break;
|
|
}
|
|
msleep(1);
|
|
}
|
|
} else
|
|
msleep(100);
|
|
|
|
// check upload was OK
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
|
|
tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);
|
|
|
|
data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
|
|
data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
|
|
if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
|
|
printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
|
|
return -EIO;
|
|
}
|
|
printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
|
|
return 0;
|
|
}
|
|
|
|
static int tda10045_fwupload(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int ret;
|
|
const struct firmware *fw;
|
|
|
|
/* don't re-upload unless necessary */
|
|
if (tda1004x_check_upload_ok(state) == 0)
|
|
return 0;
|
|
|
|
/* request the firmware, this will block until someone uploads it */
|
|
printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
|
|
ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
|
|
if (ret) {
|
|
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
|
|
return ret;
|
|
}
|
|
|
|
/* reset chip */
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
|
|
msleep(10);
|
|
|
|
/* set parameters */
|
|
tda10045h_set_bandwidth(state, 8000000);
|
|
|
|
ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
|
|
release_firmware(fw);
|
|
if (ret)
|
|
return ret;
|
|
printk(KERN_INFO "tda1004x: firmware upload complete\n");
|
|
|
|
/* wait for DSP to initialise */
|
|
/* DSPREADY doesn't seem to work on the TDA10045H */
|
|
msleep(100);
|
|
|
|
return tda1004x_check_upload_ok(state);
|
|
}
|
|
|
|
static void tda10046_init_plls(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tda10046_clk53m;
|
|
|
|
if ((state->config->if_freq == TDA10046_FREQ_045) ||
|
|
(state->config->if_freq == TDA10046_FREQ_052))
|
|
tda10046_clk53m = 0;
|
|
else
|
|
tda10046_clk53m = 1;
|
|
|
|
tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
|
|
if(tda10046_clk53m) {
|
|
printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
|
|
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
|
|
} else {
|
|
printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
|
|
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
|
|
}
|
|
if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
|
|
dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__);
|
|
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
|
|
} else {
|
|
dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__);
|
|
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
|
|
}
|
|
if(tda10046_clk53m)
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
|
|
else
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
|
|
/* Note clock frequency is handled implicitly */
|
|
switch (state->config->if_freq) {
|
|
case TDA10046_FREQ_045:
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
|
|
break;
|
|
case TDA10046_FREQ_052:
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
|
|
break;
|
|
case TDA10046_FREQ_3617:
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
|
|
break;
|
|
case TDA10046_FREQ_3613:
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
|
|
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
|
|
break;
|
|
}
|
|
tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */
|
|
/* let the PLLs settle */
|
|
msleep(120);
|
|
}
|
|
|
|
static int tda10046_fwupload(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int ret, confc4;
|
|
const struct firmware *fw;
|
|
|
|
/* reset + wake up chip */
|
|
if (state->config->xtal_freq == TDA10046_XTAL_4M) {
|
|
confc4 = 0;
|
|
} else {
|
|
dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__);
|
|
confc4 = 0x80;
|
|
}
|
|
tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
|
|
|
|
tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
|
|
/* set GPIO 1 and 3 */
|
|
if (state->config->gpio_config != TDA10046_GPTRI) {
|
|
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
|
|
}
|
|
/* let the clocks recover from sleep */
|
|
msleep(10);
|
|
|
|
/* The PLLs need to be reprogrammed after sleep */
|
|
tda10046_init_plls(fe);
|
|
tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);
|
|
|
|
/* don't re-upload unless necessary */
|
|
if (tda1004x_check_upload_ok(state) == 0)
|
|
return 0;
|
|
|
|
/*
|
|
For i2c normal work, we need to slow down the bus speed.
|
|
However, the slow down breaks the eeprom firmware load.
|
|
So, use normal speed for eeprom booting and then restore the
|
|
i2c speed after that. Tested with MSI TV @nyware A/D board,
|
|
that comes with firmware version 29 inside their eeprom.
|
|
|
|
It should also be noticed that no other I2C transfer should
|
|
be in course while booting from eeprom, otherwise, tda10046
|
|
goes into an instable state. So, proper locking are needed
|
|
at the i2c bus master.
|
|
*/
|
|
printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
|
|
tda1004x_write_byteI(state, TDA1004X_CONFC4, 4);
|
|
msleep(300);
|
|
tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);
|
|
|
|
/* Checks if eeprom firmware went without troubles */
|
|
if (tda1004x_check_upload_ok(state) == 0)
|
|
return 0;
|
|
|
|
/* eeprom firmware didn't work. Load one manually. */
|
|
|
|
if (state->config->request_firmware != NULL) {
|
|
/* request the firmware, this will block until someone uploads it */
|
|
printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
|
|
ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
|
|
if (ret) {
|
|
/* remain compatible to old bug: try to load with tda10045 image name */
|
|
ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
|
|
if (ret) {
|
|
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
|
|
return ret;
|
|
} else {
|
|
printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
|
|
TDA10046_DEFAULT_FIRMWARE);
|
|
}
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
|
|
return -EIO;
|
|
}
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
|
|
ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
|
|
release_firmware(fw);
|
|
return tda1004x_check_upload_ok(state);
|
|
}
|
|
|
|
static int tda1004x_encode_fec(int fec)
|
|
{
|
|
// convert known FEC values
|
|
switch (fec) {
|
|
case FEC_1_2:
|
|
return 0;
|
|
case FEC_2_3:
|
|
return 1;
|
|
case FEC_3_4:
|
|
return 2;
|
|
case FEC_5_6:
|
|
return 3;
|
|
case FEC_7_8:
|
|
return 4;
|
|
}
|
|
|
|
// unsupported
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tda1004x_decode_fec(int tdafec)
|
|
{
|
|
// convert known FEC values
|
|
switch (tdafec) {
|
|
case 0:
|
|
return FEC_1_2;
|
|
case 1:
|
|
return FEC_2_3;
|
|
case 2:
|
|
return FEC_3_4;
|
|
case 3:
|
|
return FEC_5_6;
|
|
case 4:
|
|
return FEC_7_8;
|
|
}
|
|
|
|
// unsupported
|
|
return -1;
|
|
}
|
|
|
|
static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
|
|
if (len != 2)
|
|
return -EINVAL;
|
|
|
|
return tda1004x_write_byteI(state, buf[0], buf[1]);
|
|
}
|
|
|
|
static int tda10045_init(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (tda10045_fwupload(fe)) {
|
|
printk("tda1004x: firmware upload failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
|
|
|
|
// tda setup
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
|
|
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal
|
|
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
|
|
tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
|
|
tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
|
|
tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
|
|
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
|
|
tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);
|
|
|
|
tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda10046_init(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (tda10046_fwupload(fe)) {
|
|
printk("tda1004x: firmware upload failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
// tda setup
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
|
|
tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream
|
|
tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer
|
|
|
|
switch (state->config->agc_config) {
|
|
case TDA10046_AGC_DEFAULT:
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
|
|
break;
|
|
case TDA10046_AGC_IFO_AUTO_NEG:
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
|
|
break;
|
|
case TDA10046_AGC_IFO_AUTO_POS:
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00); // set AGC polarities
|
|
break;
|
|
case TDA10046_AGC_TDA827X:
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities
|
|
break;
|
|
}
|
|
if (state->config->ts_mode == 0) {
|
|
tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);
|
|
tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
|
|
} else {
|
|
tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,
|
|
state->config->invert_oclk << 4);
|
|
}
|
|
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
|
|
tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // }
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // }
|
|
tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
|
|
tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
|
|
tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
|
|
tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
|
|
// tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_set_fe(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tmp;
|
|
int inversion;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
|
|
// setup auto offset
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);
|
|
|
|
// disable agc_conf[2]
|
|
tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);
|
|
}
|
|
|
|
// set frequency
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
// Hardcoded to use auto as much as possible on the TDA10045 as it
|
|
// is very unreliable if AUTO mode is _not_ used.
|
|
if (state->demod_type == TDA1004X_DEMOD_TDA10045) {
|
|
fe_params->code_rate_HP = FEC_AUTO;
|
|
fe_params->guard_interval = GUARD_INTERVAL_AUTO;
|
|
fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;
|
|
}
|
|
|
|
// Set standard params.. or put them to auto
|
|
if ((fe_params->code_rate_HP == FEC_AUTO) ||
|
|
(fe_params->code_rate_LP == FEC_AUTO) ||
|
|
(fe_params->modulation == QAM_AUTO) ||
|
|
(fe_params->hierarchy == HIERARCHY_AUTO)) {
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); /* turn off modulation bits */
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits
|
|
} else {
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0); // disable auto
|
|
|
|
// set HP FEC
|
|
tmp = tda1004x_encode_fec(fe_params->code_rate_HP);
|
|
if (tmp < 0)
|
|
return tmp;
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
|
|
|
|
// set LP FEC
|
|
tmp = tda1004x_encode_fec(fe_params->code_rate_LP);
|
|
if (tmp < 0)
|
|
return tmp;
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
|
|
|
|
/* set modulation */
|
|
switch (fe_params->modulation) {
|
|
case QPSK:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);
|
|
break;
|
|
|
|
case QAM_16:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);
|
|
break;
|
|
|
|
case QAM_64:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
// set hierarchy
|
|
switch (fe_params->hierarchy) {
|
|
case HIERARCHY_NONE:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);
|
|
break;
|
|
|
|
case HIERARCHY_1:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);
|
|
break;
|
|
|
|
case HIERARCHY_2:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);
|
|
break;
|
|
|
|
case HIERARCHY_4:
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
// set bandwidth
|
|
switch (state->demod_type) {
|
|
case TDA1004X_DEMOD_TDA10045:
|
|
tda10045h_set_bandwidth(state, fe_params->bandwidth_hz);
|
|
break;
|
|
|
|
case TDA1004X_DEMOD_TDA10046:
|
|
tda10046h_set_bandwidth(state, fe_params->bandwidth_hz);
|
|
break;
|
|
}
|
|
|
|
// set inversion
|
|
inversion = fe_params->inversion;
|
|
if (state->config->invert)
|
|
inversion = inversion ? INVERSION_OFF : INVERSION_ON;
|
|
switch (inversion) {
|
|
case INVERSION_OFF:
|
|
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
|
|
break;
|
|
|
|
case INVERSION_ON:
|
|
tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
// set guard interval
|
|
switch (fe_params->guard_interval) {
|
|
case GUARD_INTERVAL_1_32:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
|
|
break;
|
|
|
|
case GUARD_INTERVAL_1_16:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);
|
|
break;
|
|
|
|
case GUARD_INTERVAL_1_8:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);
|
|
break;
|
|
|
|
case GUARD_INTERVAL_1_4:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);
|
|
break;
|
|
|
|
case GUARD_INTERVAL_AUTO:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
// set transmission mode
|
|
switch (fe_params->transmission_mode) {
|
|
case TRANSMISSION_MODE_2K:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);
|
|
break;
|
|
|
|
case TRANSMISSION_MODE_8K:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);
|
|
break;
|
|
|
|
case TRANSMISSION_MODE_AUTO:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);
|
|
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
// start the lock
|
|
switch (state->demod_type) {
|
|
case TDA1004X_DEMOD_TDA10045:
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
|
|
break;
|
|
|
|
case TDA1004X_DEMOD_TDA10046:
|
|
tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
|
|
msleep(1);
|
|
tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
|
|
break;
|
|
}
|
|
|
|
msleep(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_get_fe(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *fe_params)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int status;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
|
|
if (status == -1)
|
|
return -EIO;
|
|
|
|
/* Only update the properties cache if device is locked */
|
|
if (!(status & 8))
|
|
return 0;
|
|
|
|
// inversion status
|
|
fe_params->inversion = INVERSION_OFF;
|
|
if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
|
|
fe_params->inversion = INVERSION_ON;
|
|
if (state->config->invert)
|
|
fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
|
|
|
|
// bandwidth
|
|
switch (state->demod_type) {
|
|
case TDA1004X_DEMOD_TDA10045:
|
|
switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
|
|
case 0x14:
|
|
fe_params->bandwidth_hz = 8000000;
|
|
break;
|
|
case 0xdb:
|
|
fe_params->bandwidth_hz = 7000000;
|
|
break;
|
|
case 0x4f:
|
|
fe_params->bandwidth_hz = 6000000;
|
|
break;
|
|
}
|
|
break;
|
|
case TDA1004X_DEMOD_TDA10046:
|
|
switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
|
|
case 0x5c:
|
|
case 0x54:
|
|
fe_params->bandwidth_hz = 8000000;
|
|
break;
|
|
case 0x6a:
|
|
case 0x60:
|
|
fe_params->bandwidth_hz = 7000000;
|
|
break;
|
|
case 0x7b:
|
|
case 0x70:
|
|
fe_params->bandwidth_hz = 6000000;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
// FEC
|
|
fe_params->code_rate_HP =
|
|
tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);
|
|
fe_params->code_rate_LP =
|
|
tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);
|
|
|
|
/* modulation */
|
|
switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {
|
|
case 0:
|
|
fe_params->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
fe_params->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
fe_params->modulation = QAM_64;
|
|
break;
|
|
}
|
|
|
|
// transmission mode
|
|
fe_params->transmission_mode = TRANSMISSION_MODE_2K;
|
|
if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
|
|
fe_params->transmission_mode = TRANSMISSION_MODE_8K;
|
|
|
|
// guard interval
|
|
switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
|
|
case 0:
|
|
fe_params->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
fe_params->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
fe_params->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
fe_params->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
// hierarchy
|
|
switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {
|
|
case 0:
|
|
fe_params->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
fe_params->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
fe_params->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
fe_params->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *fe_status)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int status;
|
|
int cber;
|
|
int vber;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
// read status
|
|
status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
|
|
if (status == -1)
|
|
return -EIO;
|
|
|
|
// decode
|
|
*fe_status = 0;
|
|
if (status & 4)
|
|
*fe_status |= FE_HAS_SIGNAL;
|
|
if (status & 2)
|
|
*fe_status |= FE_HAS_CARRIER;
|
|
if (status & 8)
|
|
*fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
|
|
|
// if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
|
|
// is getting anything valid
|
|
if (!(*fe_status & FE_HAS_VITERBI)) {
|
|
// read the CBER
|
|
cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
|
|
if (cber == -1)
|
|
return -EIO;
|
|
status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
|
|
if (status == -1)
|
|
return -EIO;
|
|
cber |= (status << 8);
|
|
// The address 0x20 should be read to cope with a TDA10046 bug
|
|
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
|
|
|
|
if (cber != 65535)
|
|
*fe_status |= FE_HAS_VITERBI;
|
|
}
|
|
|
|
// if we DO have some valid VITERBI output, but don't already have SYNC
|
|
// bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.
|
|
if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
|
|
// read the VBER
|
|
vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
|
|
if (vber == -1)
|
|
return -EIO;
|
|
status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
|
|
if (status == -1)
|
|
return -EIO;
|
|
vber |= (status << 8);
|
|
status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
|
|
if (status == -1)
|
|
return -EIO;
|
|
vber |= (status & 0x0f) << 16;
|
|
// The CVBER_LUT should be read to cope with TDA10046 hardware bug
|
|
tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
|
|
|
|
// if RS has passed some valid TS packets, then we must be
|
|
// getting some SYNC bytes
|
|
if (vber < 16632)
|
|
*fe_status |= FE_HAS_SYNC;
|
|
}
|
|
|
|
// success
|
|
dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tmp;
|
|
int reg = 0;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
// determine the register to use
|
|
switch (state->demod_type) {
|
|
case TDA1004X_DEMOD_TDA10045:
|
|
reg = TDA10045H_S_AGC;
|
|
break;
|
|
|
|
case TDA1004X_DEMOD_TDA10046:
|
|
reg = TDA10046H_AGC_IF_LEVEL;
|
|
break;
|
|
}
|
|
|
|
// read it
|
|
tmp = tda1004x_read_byte(state, reg);
|
|
if (tmp < 0)
|
|
return -EIO;
|
|
|
|
*signal = (tmp << 8) | tmp;
|
|
dprintk("%s: signal=0x%x\n", __func__, *signal);
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tmp;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
// read it
|
|
tmp = tda1004x_read_byte(state, TDA1004X_SNR);
|
|
if (tmp < 0)
|
|
return -EIO;
|
|
tmp = 255 - tmp;
|
|
|
|
*snr = ((tmp << 8) | tmp);
|
|
dprintk("%s: snr=0x%x\n", __func__, *snr);
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tmp;
|
|
int tmp2;
|
|
int counter;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
// read the UCBLOCKS and reset
|
|
counter = 0;
|
|
tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);
|
|
if (tmp < 0)
|
|
return -EIO;
|
|
tmp &= 0x7f;
|
|
while (counter++ < 5) {
|
|
tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
|
|
tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
|
|
tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
|
|
|
|
tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);
|
|
if (tmp2 < 0)
|
|
return -EIO;
|
|
tmp2 &= 0x7f;
|
|
if ((tmp2 < tmp) || (tmp2 == 0))
|
|
break;
|
|
}
|
|
|
|
if (tmp != 0x7f)
|
|
*ucblocks = tmp;
|
|
else
|
|
*ucblocks = 0xffffffff;
|
|
|
|
dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int tmp;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
// read it in
|
|
tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
|
|
if (tmp < 0)
|
|
return -EIO;
|
|
*ber = tmp << 1;
|
|
tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
|
|
if (tmp < 0)
|
|
return -EIO;
|
|
*ber |= (tmp << 9);
|
|
// The address 0x20 should be read to cope with a TDA10046 bug
|
|
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
|
|
|
|
dprintk("%s: ber=0x%x\n", __func__, *ber);
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
int gpio_conf;
|
|
|
|
switch (state->demod_type) {
|
|
case TDA1004X_DEMOD_TDA10045:
|
|
tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
|
|
break;
|
|
|
|
case TDA1004X_DEMOD_TDA10046:
|
|
/* set outputs to tristate */
|
|
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
|
|
/* invert GPIO 1 and 3 if desired*/
|
|
gpio_conf = state->config->gpio_config;
|
|
if (gpio_conf >= TDA10046_GP00_I)
|
|
tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
|
|
(gpio_conf & 0x0f) ^ 0x0a);
|
|
|
|
tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);
|
|
tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct tda1004x_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
return tda1004x_enable_tuner_i2c(state);
|
|
} else {
|
|
return tda1004x_disable_tuner_i2c(state);
|
|
}
|
|
}
|
|
|
|
static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 800;
|
|
/* Drift compensation makes no sense for DVB-T */
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void tda1004x_release(struct dvb_frontend* fe)
|
|
{
|
|
struct tda1004x_state *state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops tda10045_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Philips TDA10045H DVB-T",
|
|
.frequency_min_hz = 51 * MHz,
|
|
.frequency_max_hz = 858 * MHz,
|
|
.frequency_stepsize_hz = 166667,
|
|
.caps =
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
|
|
},
|
|
|
|
.release = tda1004x_release,
|
|
|
|
.init = tda10045_init,
|
|
.sleep = tda1004x_sleep,
|
|
.write = tda1004x_write,
|
|
.i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
|
|
|
|
.set_frontend = tda1004x_set_fe,
|
|
.get_frontend = tda1004x_get_fe,
|
|
.get_tune_settings = tda1004x_get_tune_settings,
|
|
|
|
.read_status = tda1004x_read_status,
|
|
.read_ber = tda1004x_read_ber,
|
|
.read_signal_strength = tda1004x_read_signal_strength,
|
|
.read_snr = tda1004x_read_snr,
|
|
.read_ucblocks = tda1004x_read_ucblocks,
|
|
};
|
|
|
|
struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct tda1004x_state *state;
|
|
int id;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
|
|
if (!state) {
|
|
printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->demod_type = TDA1004X_DEMOD_TDA10045;
|
|
|
|
/* check if the demod is there */
|
|
id = tda1004x_read_byte(state, TDA1004X_CHIPID);
|
|
if (id < 0) {
|
|
printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
if (id != 0x25) {
|
|
printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops tda10046_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Philips TDA10046H DVB-T",
|
|
.frequency_min_hz = 51 * MHz,
|
|
.frequency_max_hz = 858 * MHz,
|
|
.frequency_stepsize_hz = 166667,
|
|
.caps =
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
|
|
},
|
|
|
|
.release = tda1004x_release,
|
|
|
|
.init = tda10046_init,
|
|
.sleep = tda1004x_sleep,
|
|
.write = tda1004x_write,
|
|
.i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
|
|
|
|
.set_frontend = tda1004x_set_fe,
|
|
.get_frontend = tda1004x_get_fe,
|
|
.get_tune_settings = tda1004x_get_tune_settings,
|
|
|
|
.read_status = tda1004x_read_status,
|
|
.read_ber = tda1004x_read_ber,
|
|
.read_signal_strength = tda1004x_read_signal_strength,
|
|
.read_snr = tda1004x_read_snr,
|
|
.read_ucblocks = tda1004x_read_ucblocks,
|
|
};
|
|
|
|
struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct tda1004x_state *state;
|
|
int id;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
|
|
if (!state) {
|
|
printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->demod_type = TDA1004X_DEMOD_TDA10046;
|
|
|
|
/* check if the demod is there */
|
|
id = tda1004x_read_byte(state, TDA1004X_CHIPID);
|
|
if (id < 0) {
|
|
printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
if (id != 0x46) {
|
|
printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
}
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");
|
|
MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL_GPL(tda10045_attach);
|
|
EXPORT_SYMBOL_GPL(tda10046_attach);
|