linux-zen-desktop/drivers/media/tuners/tda18250_priv.h

137 lines
3.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* NXP TDA18250BHN silicon tuner driver
*
* Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi>
*/
#ifndef TDA18250_PRIV_H
#define TDA18250_PRIV_H
#include "tda18250.h"
#define R00_ID1 0x00 /* ID byte 1 */
#define R01_ID2 0x01 /* ID byte 2 */
#define R02_ID3 0x02 /* ID byte 3 */
#define R03_THERMO1 0x03 /* Thermo byte 1 */
#define R04_THERMO2 0x04 /* Thermo byte 2 */
#define R05_POWER1 0x05 /* Power byte 1 */
#define R06_POWER2 0x06 /* Power byte 2 */
#define R07_GPIO 0x07 /* GPIO */
#define R08_IRQ1 0x08 /* IRQ */
#define R09_IRQ2 0x09 /* IRQ */
#define R0A_IRQ3 0x0a /* IRQ */
#define R0B_IRQ4 0x0b /* IRQ */
#define R0C_AGC11 0x0c /* AGC1 byte 1 */
#define R0D_AGC12 0x0d /* AGC1 byte 2 */
#define R0E_AGC13 0x0e /* AGC1 byte 3 */
#define R0F_AGC14 0x0f /* AGC1 byte 4 */
#define R10_LT1 0x10 /* LT byte 1 */
#define R11_LT2 0x11 /* LT byte 2 */
#define R12_AGC21 0x12 /* AGC2 byte 1 */
#define R13_AGC22 0x13 /* AGC2 byte 2 */
#define R14_AGC23 0x14 /* AGC2 byte 3 */
#define R15_AGC24 0x15 /* AGC2 byte 4 */
#define R16_AGC25 0x16 /* AGC2 byte 5 */
#define R17_AGC31 0x17 /* AGC3 byte 1 */
#define R18_AGC32 0x18 /* AGC3 byte 2 */
#define R19_AGC33 0x19 /* AGC3 byte 3 */
#define R1A_AGCK 0x1a
#define R1B_GAIN1 0x1b
#define R1C_GAIN2 0x1c
#define R1D_GAIN3 0x1d
#define R1E_WI_FI 0x1e /* Wireless Filter */
#define R1F_RF_BPF 0x1f /* RF Band Pass Filter */
#define R20_IR_MIX 0x20 /* IR Mixer */
#define R21_IF_AGC 0x21
#define R22_IF1 0x22 /* IF byte 1 */
#define R23_IF2 0x23 /* IF byte 2 */
#define R24_IF3 0x24 /* IF byte 3 */
#define R25_REF 0x25 /* reference byte */
#define R26_IF 0x26 /* IF frequency */
#define R27_RF1 0x27 /* RF frequency byte 1 */
#define R28_RF2 0x28 /* RF frequency byte 2 */
#define R29_RF3 0x29 /* RF frequency byte 3 */
#define R2A_MSM1 0x2a
#define R2B_MSM2 0x2b
#define R2C_PS1 0x2c /* power saving mode byte 1 */
#define R2D_PS2 0x2d /* power saving mode byte 2 */
#define R2E_PS3 0x2e /* power saving mode byte 3 */
#define R2F_RSSI1 0x2f
#define R30_RSSI2 0x30
#define R31_IRQ_CTRL 0x31
#define R32_DUMMY 0x32
#define R33_TEST 0x33
#define R34_MD1 0x34
#define R35_SD1 0x35
#define R36_SD2 0x36
#define R37_SD3 0x37
#define R38_SD4 0x38
#define R39_SD5 0x39
#define R3A_SD_TEST 0x3a
#define R3B_REGU 0x3b
#define R3C_RCCAL1 0x3c
#define R3D_RCCAL2 0x3d
#define R3E_IRCAL1 0x3e
#define R3F_IRCAL2 0x3f
#define R40_IRCAL3 0x40
#define R41_IRCAL4 0x41
#define R42_IRCAL5 0x42
#define R43_PD1 0x43 /* power down byte 1 */
#define R44_PD2 0x44 /* power down byte 2 */
#define R45_PD 0x45 /* power down */
#define R46_CPUMP 0x46 /* charge pump */
#define R47_LNAPOL 0x47 /* LNA polar casc */
#define R48_SMOOTH1 0x48 /* smooth test byte 1 */
#define R49_SMOOTH2 0x49 /* smooth test byte 2 */
#define R4A_SMOOTH3 0x4a /* smooth test byte 3 */
#define R4B_XTALOSC1 0x4b
#define R4C_XTALOSC2 0x4c
#define R4D_XTALFLX1 0x4d
#define R4E_XTALFLX2 0x4e
#define R4F_XTALFLX3 0x4f
#define R50_XTALFLX4 0x50
#define R51_XTALFLX5 0x51
#define R52_IRLOOP0 0x52
#define R53_IRLOOP1 0x53
#define R54_IRLOOP2 0x54
#define R55_IRLOOP3 0x55
#define R56_IRLOOP4 0x56
#define R57_PLL_LOG 0x57
#define R58_AGC2_UP1 0x58
#define R59_AGC2_UP2 0x59
#define R5A_H3H5 0x5a
#define R5B_AGC_AUTO 0x5b
#define R5C_AGC_DEBUG 0x5c
#define TDA18250_NUM_REGS 93
#define TDA18250_POWER_STANDBY 0
#define TDA18250_POWER_NORMAL 1
#define TDA18250_IRQ_CAL 0x81
#define TDA18250_IRQ_HW_INIT 0x82
#define TDA18250_IRQ_TUNE 0x88
struct tda18250_dev {
struct mutex i2c_mutex;
struct dvb_frontend *fe;
struct i2c_adapter *i2c;
struct regmap *regmap;
u8 xtal_freq;
/* IF in kHz */
u16 if_dvbt_6;
u16 if_dvbt_7;
u16 if_dvbt_8;
u16 if_dvbc_6;
u16 if_dvbc_8;
u16 if_atsc;
u16 if_frequency;
bool slave;
bool loopthrough;
bool warm;
u8 regs[TDA18250_NUM_REGS];
};
#endif