585 lines
14 KiB
C
585 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
|
|
*
|
|
* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
|
|
* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
|
|
*
|
|
* see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
|
|
*/
|
|
|
|
#define DVB_USB_LOG_PREFIX "opera"
|
|
|
|
#include "dvb-usb.h"
|
|
#include "stv0299.h"
|
|
|
|
#define OPERA_READ_MSG 0
|
|
#define OPERA_WRITE_MSG 1
|
|
#define OPERA_I2C_TUNER 0xd1
|
|
|
|
#define READ_FX2_REG_REQ 0xba
|
|
#define READ_MAC_ADDR 0x08
|
|
#define OPERA_WRITE_FX2 0xbb
|
|
#define OPERA_TUNER_REQ 0xb1
|
|
#define REG_1F_SYMBOLRATE_BYTE0 0x1f
|
|
#define REG_20_SYMBOLRATE_BYTE1 0x20
|
|
#define REG_21_SYMBOLRATE_BYTE2 0x21
|
|
|
|
#define ADDR_B600_VOLTAGE_13V (0x02)
|
|
#define ADDR_B601_VOLTAGE_18V (0x03)
|
|
#define ADDR_B1A6_STREAM_CTRL (0x04)
|
|
#define ADDR_B880_READ_REMOTE (0x05)
|
|
|
|
struct opera1_state {
|
|
u32 last_key_pressed;
|
|
};
|
|
struct rc_map_opera_table {
|
|
u32 keycode;
|
|
u32 event;
|
|
};
|
|
|
|
static int dvb_usb_opera1_debug;
|
|
module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug,
|
|
"set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
|
|
DVB_USB_DEBUG_STATUS);
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
|
|
static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
|
|
u8 * data, u16 len, int flags)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
u8 *buf;
|
|
unsigned int pipe = (flags == OPERA_READ_MSG) ?
|
|
usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
|
|
u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
|
|
|
|
buf = kmalloc(len, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
if (flags == OPERA_WRITE_MSG)
|
|
memcpy(buf, data, len);
|
|
ret = usb_control_msg(dev, pipe, request,
|
|
request_type | USB_TYPE_VENDOR, value, 0x0,
|
|
buf, len, 2000);
|
|
|
|
if (request == OPERA_TUNER_REQ) {
|
|
tmp = buf[0];
|
|
if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
|
|
0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) {
|
|
ret = 0;
|
|
goto out;
|
|
}
|
|
buf[0] = tmp;
|
|
}
|
|
if (flags == OPERA_READ_MSG)
|
|
memcpy(data, buf, len);
|
|
out:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
/* I2C */
|
|
|
|
static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
|
|
u8 * buf, u16 len)
|
|
{
|
|
int ret = 0;
|
|
u8 request;
|
|
u16 value;
|
|
|
|
if (!dev) {
|
|
info("no usb_device");
|
|
return -EINVAL;
|
|
}
|
|
if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
switch (addr>>1){
|
|
case ADDR_B600_VOLTAGE_13V:
|
|
request=0xb6;
|
|
value=0x00;
|
|
break;
|
|
case ADDR_B601_VOLTAGE_18V:
|
|
request=0xb6;
|
|
value=0x01;
|
|
break;
|
|
case ADDR_B1A6_STREAM_CTRL:
|
|
request=0xb1;
|
|
value=0xa6;
|
|
break;
|
|
case ADDR_B880_READ_REMOTE:
|
|
request=0xb8;
|
|
value=0x80;
|
|
break;
|
|
default:
|
|
request=0xb1;
|
|
value=addr;
|
|
}
|
|
ret = opera1_xilinx_rw(dev->udev, request,
|
|
value, buf, len,
|
|
addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
|
|
|
|
mutex_unlock(&dev->usb_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int i = 0, tmp = 0;
|
|
|
|
if (!d)
|
|
return -ENODEV;
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
if ((tmp = opera1_usb_i2c_msgxfer(d,
|
|
(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
|
|
msg[i].buf,
|
|
msg[i].len
|
|
)) != msg[i].len) {
|
|
break;
|
|
}
|
|
if (dvb_usb_opera1_debug & 0x10)
|
|
info("sending i2c message %d %d", tmp, msg[i].len);
|
|
}
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return num;
|
|
}
|
|
|
|
static u32 opera1_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm opera1_i2c_algo = {
|
|
.master_xfer = opera1_i2c_xfer,
|
|
.functionality = opera1_i2c_func,
|
|
};
|
|
|
|
static int opera1_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
static u8 command_13v[1]={0x00};
|
|
static u8 command_18v[1]={0x01};
|
|
struct i2c_msg msg[] = {
|
|
{.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
|
|
};
|
|
struct dvb_usb_adapter *udev_adap = fe->dvb->priv;
|
|
if (voltage == SEC_VOLTAGE_18) {
|
|
msg[0].addr = ADDR_B601_VOLTAGE_18V;
|
|
msg[0].buf = command_18v;
|
|
}
|
|
i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
|
|
u32 ratio)
|
|
{
|
|
stv0299_writereg(fe, 0x13, 0x98);
|
|
stv0299_writereg(fe, 0x14, 0x95);
|
|
stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
|
|
stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
|
|
stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
|
|
return 0;
|
|
|
|
}
|
|
static u8 opera1_inittab[] = {
|
|
0x00, 0xa1,
|
|
0x01, 0x15,
|
|
0x02, 0x30,
|
|
0x03, 0x00,
|
|
0x04, 0x7d,
|
|
0x05, 0x05,
|
|
0x06, 0x02,
|
|
0x07, 0x00,
|
|
0x0b, 0x00,
|
|
0x0c, 0x01,
|
|
0x0d, 0x81,
|
|
0x0e, 0x44,
|
|
0x0f, 0x19,
|
|
0x10, 0x3f,
|
|
0x11, 0x84,
|
|
0x12, 0xda,
|
|
0x13, 0x98,
|
|
0x14, 0x95,
|
|
0x15, 0xc9,
|
|
0x16, 0xeb,
|
|
0x17, 0x00,
|
|
0x18, 0x19,
|
|
0x19, 0x8b,
|
|
0x1a, 0x00,
|
|
0x1b, 0x82,
|
|
0x1c, 0x7f,
|
|
0x1d, 0x00,
|
|
0x1e, 0x00,
|
|
REG_1F_SYMBOLRATE_BYTE0, 0x06,
|
|
REG_20_SYMBOLRATE_BYTE1, 0x50,
|
|
REG_21_SYMBOLRATE_BYTE2, 0x10,
|
|
0x22, 0x00,
|
|
0x23, 0x00,
|
|
0x24, 0x37,
|
|
0x25, 0xbc,
|
|
0x26, 0x00,
|
|
0x27, 0x00,
|
|
0x28, 0x00,
|
|
0x29, 0x1e,
|
|
0x2a, 0x14,
|
|
0x2b, 0x1f,
|
|
0x2c, 0x09,
|
|
0x2d, 0x0a,
|
|
0x2e, 0x00,
|
|
0x2f, 0x00,
|
|
0x30, 0x00,
|
|
0x31, 0x1f,
|
|
0x32, 0x19,
|
|
0x33, 0xfc,
|
|
0x34, 0x13,
|
|
0xff, 0xff,
|
|
};
|
|
|
|
static struct stv0299_config opera1_stv0299_config = {
|
|
.demod_address = 0xd0>>1,
|
|
.min_delay_ms = 100,
|
|
.mclk = 88000000UL,
|
|
.invert = 1,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0299_LOCKOUTPUT_0,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP0,
|
|
.inittab = opera1_inittab,
|
|
.set_symbol_rate = opera1_stv0299_set_symbol_rate,
|
|
};
|
|
|
|
static int opera1_frontend_attach(struct dvb_usb_adapter *d)
|
|
{
|
|
d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
|
|
&d->dev->i2c_adap);
|
|
if ((d->fe_adap[0].fe) != NULL) {
|
|
d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
|
|
return 0;
|
|
}
|
|
info("not attached stv0299");
|
|
return -EIO;
|
|
}
|
|
|
|
static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(
|
|
dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
|
|
&adap->dev->i2c_adap, DVB_PLL_OPERA1
|
|
);
|
|
return 0;
|
|
}
|
|
|
|
static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
u8 val = onoff ? 0x01 : 0x00;
|
|
|
|
if (dvb_usb_opera1_debug)
|
|
info("power %s", onoff ? "on" : "off");
|
|
return opera1_xilinx_rw(d->udev, 0xb7, val,
|
|
&val, 1, OPERA_WRITE_MSG);
|
|
}
|
|
|
|
static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
static u8 buf_start[2] = { 0xff, 0x03 };
|
|
static u8 buf_stop[2] = { 0xff, 0x00 };
|
|
struct i2c_msg start_tuner[] = {
|
|
{.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
|
|
};
|
|
if (dvb_usb_opera1_debug)
|
|
info("streaming %s", onoff ? "on" : "off");
|
|
i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
|
|
int onoff)
|
|
{
|
|
u8 b_pid[3];
|
|
struct i2c_msg msg[] = {
|
|
{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
|
|
};
|
|
if (dvb_usb_opera1_debug)
|
|
info("pidfilter index: %d pid: %d %s", index, pid,
|
|
onoff ? "on" : "off");
|
|
b_pid[0] = (2 * index) + 4;
|
|
b_pid[1] = onoff ? (pid & 0xff) : (0x00);
|
|
b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
|
|
i2c_transfer(&adap->dev->i2c_adap, msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
int u = 0x04;
|
|
u8 b_pid[3];
|
|
struct i2c_msg msg[] = {
|
|
{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
|
|
};
|
|
if (dvb_usb_opera1_debug)
|
|
info("%s hw-pidfilter", onoff ? "enable" : "disable");
|
|
for (; u < 0x7e; u += 2) {
|
|
b_pid[0] = u;
|
|
b_pid[1] = 0;
|
|
b_pid[2] = 0x80;
|
|
i2c_transfer(&adap->dev->i2c_adap, msg, 1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct rc_map_table rc_map_opera1_table[] = {
|
|
{0x5fa0, KEY_1},
|
|
{0x51af, KEY_2},
|
|
{0x5da2, KEY_3},
|
|
{0x41be, KEY_4},
|
|
{0x0bf5, KEY_5},
|
|
{0x43bd, KEY_6},
|
|
{0x47b8, KEY_7},
|
|
{0x49b6, KEY_8},
|
|
{0x05fa, KEY_9},
|
|
{0x45ba, KEY_0},
|
|
{0x09f6, KEY_CHANNELUP}, /*chanup */
|
|
{0x1be5, KEY_CHANNELDOWN}, /*chandown */
|
|
{0x5da3, KEY_VOLUMEDOWN}, /*voldown */
|
|
{0x5fa1, KEY_VOLUMEUP}, /*volup */
|
|
{0x07f8, KEY_SPACE}, /*tab */
|
|
{0x1fe1, KEY_OK}, /*play ok */
|
|
{0x1be4, KEY_ZOOM}, /*zoom */
|
|
{0x59a6, KEY_MUTE}, /*mute */
|
|
{0x5ba5, KEY_RADIO}, /*tv/f */
|
|
{0x19e7, KEY_RECORD}, /*rec */
|
|
{0x01fe, KEY_STOP}, /*Stop */
|
|
{0x03fd, KEY_PAUSE}, /*pause */
|
|
{0x03fc, KEY_SCREEN}, /*<- -> */
|
|
{0x07f9, KEY_CAMERA}, /*capture */
|
|
{0x47b9, KEY_ESC}, /*exit */
|
|
{0x43bc, KEY_POWER2}, /*power */
|
|
};
|
|
|
|
static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
|
|
{
|
|
struct opera1_state *opst = dev->priv;
|
|
u8 rcbuffer[32];
|
|
const u16 startmarker1 = 0x10ed;
|
|
const u16 startmarker2 = 0x11ec;
|
|
struct i2c_msg read_remote[] = {
|
|
{.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
|
|
};
|
|
int i = 0;
|
|
u32 send_key = 0;
|
|
|
|
if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
|
|
for (i = 0; i < 32; i++) {
|
|
if (rcbuffer[i])
|
|
send_key |= 1;
|
|
if (i < 31)
|
|
send_key = send_key << 1;
|
|
}
|
|
if (send_key & 0x8000)
|
|
send_key = (send_key << 1) | (send_key >> 15 & 0x01);
|
|
|
|
if (send_key == 0xffff && opst->last_key_pressed != 0) {
|
|
*state = REMOTE_KEY_REPEAT;
|
|
*event = opst->last_key_pressed;
|
|
return 0;
|
|
}
|
|
for (; send_key != 0;) {
|
|
if (send_key >> 16 == startmarker2) {
|
|
break;
|
|
} else if (send_key >> 16 == startmarker1) {
|
|
send_key =
|
|
(send_key & 0xfffeffff) | (startmarker1 << 16);
|
|
break;
|
|
} else
|
|
send_key >>= 1;
|
|
}
|
|
|
|
if (send_key == 0)
|
|
return 0;
|
|
|
|
send_key = (send_key & 0xffff) | 0x0100;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
|
|
if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
|
|
*state = REMOTE_KEY_PRESSED;
|
|
*event = rc_map_opera1_table[i].keycode;
|
|
opst->last_key_pressed =
|
|
rc_map_opera1_table[i].keycode;
|
|
break;
|
|
}
|
|
opst->last_key_pressed = 0;
|
|
}
|
|
} else
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
return 0;
|
|
}
|
|
|
|
enum {
|
|
CYPRESS_OPERA1_COLD,
|
|
OPERA1_WARM,
|
|
};
|
|
|
|
static struct usb_device_id opera1_table[] = {
|
|
DVB_USB_DEV(CYPRESS, CYPRESS_OPERA1_COLD),
|
|
DVB_USB_DEV(OPERA1, OPERA1_WARM),
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, opera1_table);
|
|
|
|
static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
|
|
{
|
|
u8 command[] = { READ_MAC_ADDR };
|
|
opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
|
|
opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
|
|
return 0;
|
|
}
|
|
static int opera1_xilinx_load_firmware(struct usb_device *dev,
|
|
const char *filename)
|
|
{
|
|
const struct firmware *fw = NULL;
|
|
u8 *b, *p;
|
|
int ret = 0, i,fpgasize=40;
|
|
u8 testval;
|
|
info("start downloading fpga firmware %s",filename);
|
|
|
|
if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
|
|
err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
|
|
filename);
|
|
return ret;
|
|
} else {
|
|
p = kmalloc(fw->size, GFP_KERNEL);
|
|
opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
|
|
if (p != NULL && testval != 0x67) {
|
|
|
|
u8 reset = 0, fpga_command = 0;
|
|
memcpy(p, fw->data, fw->size);
|
|
/* clear fpga ? */
|
|
opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
|
|
OPERA_WRITE_MSG);
|
|
for (i = 0; i < fw->size;) {
|
|
if ( (fw->size - i) <fpgasize){
|
|
fpgasize=fw->size-i;
|
|
}
|
|
b = (u8 *) p + i;
|
|
if (opera1_xilinx_rw
|
|
(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
|
|
OPERA_WRITE_MSG) != fpgasize
|
|
) {
|
|
err("error while transferring firmware");
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
i = i + fpgasize;
|
|
}
|
|
/* restart the CPU */
|
|
if (ret || opera1_xilinx_rw
|
|
(dev, 0xa0, 0xe600, &reset, 1,
|
|
OPERA_WRITE_MSG) != 1) {
|
|
err("could not restart the USB controller CPU.");
|
|
ret = -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
kfree(p);
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static struct dvb_usb_device_properties opera1_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
.firmware = "dvb-usb-opera-01.fw",
|
|
.size_of_priv = sizeof(struct opera1_state),
|
|
|
|
.power_ctrl = opera1_power_ctrl,
|
|
.i2c_algo = &opera1_i2c_algo,
|
|
|
|
.rc.legacy = {
|
|
.rc_map_table = rc_map_opera1_table,
|
|
.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
|
|
.rc_interval = 200,
|
|
.rc_query = opera1_rc_query,
|
|
},
|
|
.read_mac_address = opera1_read_mac_address,
|
|
.generic_bulk_ctrl_endpoint = 0x00,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.num_frontends = 1,
|
|
.fe = {{
|
|
.frontend_attach = opera1_frontend_attach,
|
|
.streaming_ctrl = opera1_streaming_ctrl,
|
|
.tuner_attach = opera1_tuner_attach,
|
|
.caps =
|
|
DVB_USB_ADAP_HAS_PID_FILTER |
|
|
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter = opera1_pid_filter,
|
|
.pid_filter_ctrl = opera1_pid_filter_control,
|
|
.pid_filter_count = 252,
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 10,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 4096,
|
|
}
|
|
}
|
|
},
|
|
}},
|
|
}
|
|
},
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{"Opera1 DVB-S USB2.0",
|
|
{&opera1_table[CYPRESS_OPERA1_COLD], NULL},
|
|
{&opera1_table[OPERA1_WARM], NULL},
|
|
},
|
|
}
|
|
};
|
|
|
|
static int opera1_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
|
|
if (le16_to_cpu(udev->descriptor.idProduct) == USB_PID_OPERA1_WARM &&
|
|
le16_to_cpu(udev->descriptor.idVendor) == USB_VID_OPERA1 &&
|
|
opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
|
|
) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (0 != dvb_usb_device_init(intf, &opera1_properties,
|
|
THIS_MODULE, NULL, adapter_nr))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_driver opera1_driver = {
|
|
.name = "opera1",
|
|
.probe = opera1_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = opera1_table,
|
|
};
|
|
|
|
module_usb_driver(opera1_driver);
|
|
|
|
MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
|
|
MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
|
|
MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
|
|
MODULE_VERSION("0.1");
|
|
MODULE_LICENSE("GPL");
|