kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/drivers/mtd/nand/raw/qcom_nandc.c

3412 lines
93 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
*/
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/dma/qcom_adm.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/dma/qcom_bam_dma.h>
/* NANDc reg offsets */
#define NAND_FLASH_CMD 0x00
#define NAND_ADDR0 0x04
#define NAND_ADDR1 0x08
#define NAND_FLASH_CHIP_SELECT 0x0c
#define NAND_EXEC_CMD 0x10
#define NAND_FLASH_STATUS 0x14
#define NAND_BUFFER_STATUS 0x18
#define NAND_DEV0_CFG0 0x20
#define NAND_DEV0_CFG1 0x24
#define NAND_DEV0_ECC_CFG 0x28
#define NAND_AUTO_STATUS_EN 0x2c
#define NAND_DEV1_CFG0 0x30
#define NAND_DEV1_CFG1 0x34
#define NAND_READ_ID 0x40
#define NAND_READ_STATUS 0x44
#define NAND_DEV_CMD0 0xa0
#define NAND_DEV_CMD1 0xa4
#define NAND_DEV_CMD2 0xa8
#define NAND_DEV_CMD_VLD 0xac
#define SFLASHC_BURST_CFG 0xe0
#define NAND_ERASED_CW_DETECT_CFG 0xe8
#define NAND_ERASED_CW_DETECT_STATUS 0xec
#define NAND_EBI2_ECC_BUF_CFG 0xf0
#define FLASH_BUF_ACC 0x100
#define NAND_CTRL 0xf00
#define NAND_VERSION 0xf08
#define NAND_READ_LOCATION_0 0xf20
#define NAND_READ_LOCATION_1 0xf24
#define NAND_READ_LOCATION_2 0xf28
#define NAND_READ_LOCATION_3 0xf2c
#define NAND_READ_LOCATION_LAST_CW_0 0xf40
#define NAND_READ_LOCATION_LAST_CW_1 0xf44
#define NAND_READ_LOCATION_LAST_CW_2 0xf48
#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
/* dummy register offsets, used by write_reg_dma */
#define NAND_DEV_CMD1_RESTORE 0xdead
#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
/* NAND_FLASH_CMD bits */
#define PAGE_ACC BIT(4)
#define LAST_PAGE BIT(5)
/* NAND_FLASH_CHIP_SELECT bits */
#define NAND_DEV_SEL 0
#define DM_EN BIT(2)
/* NAND_FLASH_STATUS bits */
#define FS_OP_ERR BIT(4)
#define FS_READY_BSY_N BIT(5)
#define FS_MPU_ERR BIT(8)
#define FS_DEVICE_STS_ERR BIT(16)
#define FS_DEVICE_WP BIT(23)
/* NAND_BUFFER_STATUS bits */
#define BS_UNCORRECTABLE_BIT BIT(8)
#define BS_CORRECTABLE_ERR_MSK 0x1f
/* NAND_DEVn_CFG0 bits */
#define DISABLE_STATUS_AFTER_WRITE 4
#define CW_PER_PAGE 6
#define UD_SIZE_BYTES 9
#define UD_SIZE_BYTES_MASK GENMASK(18, 9)
#define ECC_PARITY_SIZE_BYTES_RS 19
#define SPARE_SIZE_BYTES 23
#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23)
#define NUM_ADDR_CYCLES 27
#define STATUS_BFR_READ 30
#define SET_RD_MODE_AFTER_STATUS 31
/* NAND_DEVn_CFG0 bits */
#define DEV0_CFG1_ECC_DISABLE 0
#define WIDE_FLASH 1
#define NAND_RECOVERY_CYCLES 2
#define CS_ACTIVE_BSY 5
#define BAD_BLOCK_BYTE_NUM 6
#define BAD_BLOCK_IN_SPARE_AREA 16
#define WR_RD_BSY_GAP 17
#define ENABLE_BCH_ECC 27
/* NAND_DEV0_ECC_CFG bits */
#define ECC_CFG_ECC_DISABLE 0
#define ECC_SW_RESET 1
#define ECC_MODE 4
#define ECC_PARITY_SIZE_BYTES_BCH 8
#define ECC_NUM_DATA_BYTES 16
#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16)
#define ECC_FORCE_CLK_OPEN 30
/* NAND_DEV_CMD1 bits */
#define READ_ADDR 0
/* NAND_DEV_CMD_VLD bits */
#define READ_START_VLD BIT(0)
#define READ_STOP_VLD BIT(1)
#define WRITE_START_VLD BIT(2)
#define ERASE_START_VLD BIT(3)
#define SEQ_READ_START_VLD BIT(4)
/* NAND_EBI2_ECC_BUF_CFG bits */
#define NUM_STEPS 0
/* NAND_ERASED_CW_DETECT_CFG bits */
#define ERASED_CW_ECC_MASK 1
#define AUTO_DETECT_RES 0
#define MASK_ECC (1 << ERASED_CW_ECC_MASK)
#define RESET_ERASED_DET (1 << AUTO_DETECT_RES)
#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES)
#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC)
#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC)
/* NAND_ERASED_CW_DETECT_STATUS bits */
#define PAGE_ALL_ERASED BIT(7)
#define CODEWORD_ALL_ERASED BIT(6)
#define PAGE_ERASED BIT(5)
#define CODEWORD_ERASED BIT(4)
#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
/* NAND_READ_LOCATION_n bits */
#define READ_LOCATION_OFFSET 0
#define READ_LOCATION_SIZE 16
#define READ_LOCATION_LAST 31
/* Version Mask */
#define NAND_VERSION_MAJOR_MASK 0xf0000000
#define NAND_VERSION_MAJOR_SHIFT 28
#define NAND_VERSION_MINOR_MASK 0x0fff0000
#define NAND_VERSION_MINOR_SHIFT 16
/* NAND OP_CMDs */
#define OP_PAGE_READ 0x2
#define OP_PAGE_READ_WITH_ECC 0x3
#define OP_PAGE_READ_WITH_ECC_SPARE 0x4
#define OP_PAGE_READ_ONFI_READ 0x5
#define OP_PROGRAM_PAGE 0x6
#define OP_PAGE_PROGRAM_WITH_ECC 0x7
#define OP_PROGRAM_PAGE_SPARE 0x9
#define OP_BLOCK_ERASE 0xa
#define OP_FETCH_ID 0xb
#define OP_RESET_DEVICE 0xd
/* Default Value for NAND_DEV_CMD_VLD */
#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \
ERASE_START_VLD | SEQ_READ_START_VLD)
/* NAND_CTRL bits */
#define BAM_MODE_EN BIT(0)
/*
* the NAND controller performs reads/writes with ECC in 516 byte chunks.
* the driver calls the chunks 'step' or 'codeword' interchangeably
*/
#define NANDC_STEP_SIZE 512
/*
* the largest page size we support is 8K, this will have 16 steps/codewords
* of 512 bytes each
*/
#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE)
/* we read at most 3 registers per codeword scan */
#define MAX_REG_RD (3 * MAX_NUM_STEPS)
/* ECC modes supported by the controller */
#define ECC_NONE BIT(0)
#define ECC_RS_4BIT BIT(1)
#define ECC_BCH_4BIT BIT(2)
#define ECC_BCH_8BIT BIT(3)
#define nandc_set_read_loc_first(chip, reg, cw_offset, read_size, is_last_read_loc) \
nandc_set_reg(chip, reg, \
((cw_offset) << READ_LOCATION_OFFSET) | \
((read_size) << READ_LOCATION_SIZE) | \
((is_last_read_loc) << READ_LOCATION_LAST))
#define nandc_set_read_loc_last(chip, reg, cw_offset, read_size, is_last_read_loc) \
nandc_set_reg(chip, reg, \
((cw_offset) << READ_LOCATION_OFFSET) | \
((read_size) << READ_LOCATION_SIZE) | \
((is_last_read_loc) << READ_LOCATION_LAST))
/*
* Returns the actual register address for all NAND_DEV_ registers
* (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
*/
#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
/* Returns the NAND register physical address */
#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
/* Returns the dma address for reg read buffer */
#define reg_buf_dma_addr(chip, vaddr) \
((chip)->reg_read_dma + \
((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
#define QPIC_PER_CW_CMD_ELEMENTS 32
#define QPIC_PER_CW_CMD_SGL 32
#define QPIC_PER_CW_DATA_SGL 8
#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
/*
* Flags used in DMA descriptor preparation helper functions
* (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma)
*/
/* Don't set the EOT in current tx BAM sgl */
#define NAND_BAM_NO_EOT BIT(0)
/* Set the NWD flag in current BAM sgl */
#define NAND_BAM_NWD BIT(1)
/* Finish writing in the current BAM sgl and start writing in another BAM sgl */
#define NAND_BAM_NEXT_SGL BIT(2)
/*
* Erased codeword status is being used two times in single transfer so this
* flag will determine the current value of erased codeword status register
*/
#define NAND_ERASED_CW_SET BIT(4)
/*
* This data type corresponds to the BAM transaction which will be used for all
* NAND transfers.
* @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
* @last_data_desc - last DMA desc in data channel (tx/rx).
* @last_cmd_desc - last DMA desc in command channel.
* @txn_done - completion for NAND transfer.
* @bam_ce_pos - the index in bam_ce which is available for next sgl
* @bam_ce_start - the index in bam_ce which marks the start position ce
* for current sgl. It will be used for size calculation
* for current sgl
* @cmd_sgl_pos - current index in command sgl.
* @cmd_sgl_start - start index in command sgl.
* @tx_sgl_pos - current index in data sgl for tx.
* @tx_sgl_start - start index in data sgl for tx.
* @rx_sgl_pos - current index in data sgl for rx.
* @rx_sgl_start - start index in data sgl for rx.
* @wait_second_completion - wait for second DMA desc completion before making
* the NAND transfer completion.
*/
struct bam_transaction {
struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
struct dma_async_tx_descriptor *last_data_desc;
struct dma_async_tx_descriptor *last_cmd_desc;
struct completion txn_done;
u32 bam_ce_pos;
u32 bam_ce_start;
u32 cmd_sgl_pos;
u32 cmd_sgl_start;
u32 tx_sgl_pos;
u32 tx_sgl_start;
u32 rx_sgl_pos;
u32 rx_sgl_start;
bool wait_second_completion;
};
/*
* This data type corresponds to the nand dma descriptor
* @dma_desc - low level DMA engine descriptor
* @list - list for desc_info
*
* @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
* ADM
* @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
* @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
* @dir - DMA transfer direction
*/
struct desc_info {
struct dma_async_tx_descriptor *dma_desc;
struct list_head node;
union {
struct scatterlist adm_sgl;
struct {
struct scatterlist *bam_sgl;
int sgl_cnt;
};
};
enum dma_data_direction dir;
};
/*
* holds the current register values that we want to write. acts as a contiguous
* chunk of memory which we use to write the controller registers through DMA.
*/
struct nandc_regs {
__le32 cmd;
__le32 addr0;
__le32 addr1;
__le32 chip_sel;
__le32 exec;
__le32 cfg0;
__le32 cfg1;
__le32 ecc_bch_cfg;
__le32 clrflashstatus;
__le32 clrreadstatus;
__le32 cmd1;
__le32 vld;
__le32 orig_cmd1;
__le32 orig_vld;
__le32 ecc_buf_cfg;
__le32 read_location0;
__le32 read_location1;
__le32 read_location2;
__le32 read_location3;
__le32 read_location_last0;
__le32 read_location_last1;
__le32 read_location_last2;
__le32 read_location_last3;
__le32 erased_cw_detect_cfg_clr;
__le32 erased_cw_detect_cfg_set;
};
/*
* NAND controller data struct
*
* @dev: parent device
*
* @base: MMIO base
*
* @core_clk: controller clock
* @aon_clk: another controller clock
*
* @regs: a contiguous chunk of memory for DMA register
* writes. contains the register values to be
* written to controller
*
* @props: properties of current NAND controller,
* initialized via DT match data
*
* @controller: base controller structure
* @host_list: list containing all the chips attached to the
* controller
*
* @chan: dma channel
* @cmd_crci: ADM DMA CRCI for command flow control
* @data_crci: ADM DMA CRCI for data flow control
*
* @desc_list: DMA descriptor list (list of desc_infos)
*
* @data_buffer: our local DMA buffer for page read/writes,
* used when we can't use the buffer provided
* by upper layers directly
* @reg_read_buf: local buffer for reading back registers via DMA
*
* @base_phys: physical base address of controller registers
* @base_dma: dma base address of controller registers
* @reg_read_dma: contains dma address for register read buffer
*
* @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
* functions
* @max_cwperpage: maximum QPIC codewords required. calculated
* from all connected NAND devices pagesize
*
* @reg_read_pos: marker for data read in reg_read_buf
*
* @cmd1/vld: some fixed controller register values
*/
struct qcom_nand_controller {
struct device *dev;
void __iomem *base;
struct clk *core_clk;
struct clk *aon_clk;
struct nandc_regs *regs;
struct bam_transaction *bam_txn;
const struct qcom_nandc_props *props;
struct nand_controller controller;
struct list_head host_list;
union {
/* will be used only by QPIC for BAM DMA */
struct {
struct dma_chan *tx_chan;
struct dma_chan *rx_chan;
struct dma_chan *cmd_chan;
};
/* will be used only by EBI2 for ADM DMA */
struct {
struct dma_chan *chan;
unsigned int cmd_crci;
unsigned int data_crci;
};
};
struct list_head desc_list;
u8 *data_buffer;
__le32 *reg_read_buf;
phys_addr_t base_phys;
dma_addr_t base_dma;
dma_addr_t reg_read_dma;
int buf_size;
int buf_count;
int buf_start;
unsigned int max_cwperpage;
int reg_read_pos;
u32 cmd1, vld;
};
/*
* NAND special boot partitions
*
* @page_offset: offset of the partition where spare data is not protected
* by ECC (value in pages)
* @page_offset: size of the partition where spare data is not protected
* by ECC (value in pages)
*/
struct qcom_nand_boot_partition {
u32 page_offset;
u32 page_size;
};
/*
* NAND chip structure
*
* @boot_partitions: array of boot partitions where offset and size of the
* boot partitions are stored
*
* @chip: base NAND chip structure
* @node: list node to add itself to host_list in
* qcom_nand_controller
*
* @nr_boot_partitions: count of the boot partitions where spare data is not
* protected by ECC
*
* @cs: chip select value for this chip
* @cw_size: the number of bytes in a single step/codeword
* of a page, consisting of all data, ecc, spare
* and reserved bytes
* @cw_data: the number of bytes within a codeword protected
* by ECC
* @ecc_bytes_hw: ECC bytes used by controller hardware for this
* chip
*
* @last_command: keeps track of last command on this chip. used
* for reading correct status
*
* @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
* ecc/non-ecc mode for the current nand flash
* device
*
* @status: value to be returned if NAND_CMD_STATUS command
* is executed
* @codeword_fixup: keep track of the current layout used by
* the driver for read/write operation.
* @use_ecc: request the controller to use ECC for the
* upcoming read/write
* @bch_enabled: flag to tell whether BCH ECC mode is used
*/
struct qcom_nand_host {
struct qcom_nand_boot_partition *boot_partitions;
struct nand_chip chip;
struct list_head node;
int nr_boot_partitions;
int cs;
int cw_size;
int cw_data;
int ecc_bytes_hw;
int spare_bytes;
int bbm_size;
int last_command;
u32 cfg0, cfg1;
u32 cfg0_raw, cfg1_raw;
u32 ecc_buf_cfg;
u32 ecc_bch_cfg;
u32 clrflashstatus;
u32 clrreadstatus;
u8 status;
bool codeword_fixup;
bool use_ecc;
bool bch_enabled;
};
/*
* This data type corresponds to the NAND controller properties which varies
* among different NAND controllers.
* @ecc_modes - ecc mode for NAND
* @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
* @is_bam - whether NAND controller is using BAM
* @is_qpic - whether NAND CTRL is part of qpic IP
* @qpic_v2 - flag to indicate QPIC IP version 2
* @use_codeword_fixup - whether NAND has different layout for boot partitions
*/
struct qcom_nandc_props {
u32 ecc_modes;
u32 dev_cmd_reg_start;
bool is_bam;
bool is_qpic;
bool qpic_v2;
bool use_codeword_fixup;
};
/* Frees the BAM transaction memory */
static void free_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn = nandc->bam_txn;
devm_kfree(nandc->dev, bam_txn);
}
/* Allocates and Initializes the BAM transaction */
static struct bam_transaction *
alloc_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn;
size_t bam_txn_size;
unsigned int num_cw = nandc->max_cwperpage;
void *bam_txn_buf;
bam_txn_size =
sizeof(*bam_txn) + num_cw *
((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
(sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
(sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
if (!bam_txn_buf)
return NULL;
bam_txn = bam_txn_buf;
bam_txn_buf += sizeof(*bam_txn);
bam_txn->bam_ce = bam_txn_buf;
bam_txn_buf +=
sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
bam_txn->cmd_sgl = bam_txn_buf;
bam_txn_buf +=
sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
bam_txn->data_sgl = bam_txn_buf;
init_completion(&bam_txn->txn_done);
return bam_txn;
}
/* Clears the BAM transaction indexes */
static void clear_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn = nandc->bam_txn;
if (!nandc->props->is_bam)
return;
bam_txn->bam_ce_pos = 0;
bam_txn->bam_ce_start = 0;
bam_txn->cmd_sgl_pos = 0;
bam_txn->cmd_sgl_start = 0;
bam_txn->tx_sgl_pos = 0;
bam_txn->tx_sgl_start = 0;
bam_txn->rx_sgl_pos = 0;
bam_txn->rx_sgl_start = 0;
bam_txn->last_data_desc = NULL;
bam_txn->wait_second_completion = false;
sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
QPIC_PER_CW_CMD_SGL);
sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage *
QPIC_PER_CW_DATA_SGL);
reinit_completion(&bam_txn->txn_done);
}
/* Callback for DMA descriptor completion */
static void qpic_bam_dma_done(void *data)
{
struct bam_transaction *bam_txn = data;
/*
* In case of data transfer with NAND, 2 callbacks will be generated.
* One for command channel and another one for data channel.
* If current transaction has data descriptors
* (i.e. wait_second_completion is true), then set this to false
* and wait for second DMA descriptor completion.
*/
if (bam_txn->wait_second_completion)
bam_txn->wait_second_completion = false;
else
complete(&bam_txn->txn_done);
}
static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
{
return container_of(chip, struct qcom_nand_host, chip);
}
static inline struct qcom_nand_controller *
get_qcom_nand_controller(struct nand_chip *chip)
{
return container_of(chip->controller, struct qcom_nand_controller,
controller);
}
static inline u32 nandc_read(struct qcom_nand_controller *nandc, int offset)
{
return ioread32(nandc->base + offset);
}
static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
u32 val)
{
iowrite32(val, nandc->base + offset);
}
static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc,
bool is_cpu)
{
if (!nandc->props->is_bam)
return;
if (is_cpu)
dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma,
MAX_REG_RD *
sizeof(*nandc->reg_read_buf),
DMA_FROM_DEVICE);
else
dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma,
MAX_REG_RD *
sizeof(*nandc->reg_read_buf),
DMA_FROM_DEVICE);
}
static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
{
switch (offset) {
case NAND_FLASH_CMD:
return &regs->cmd;
case NAND_ADDR0:
return &regs->addr0;
case NAND_ADDR1:
return &regs->addr1;
case NAND_FLASH_CHIP_SELECT:
return &regs->chip_sel;
case NAND_EXEC_CMD:
return &regs->exec;
case NAND_FLASH_STATUS:
return &regs->clrflashstatus;
case NAND_DEV0_CFG0:
return &regs->cfg0;
case NAND_DEV0_CFG1:
return &regs->cfg1;
case NAND_DEV0_ECC_CFG:
return &regs->ecc_bch_cfg;
case NAND_READ_STATUS:
return &regs->clrreadstatus;
case NAND_DEV_CMD1:
return &regs->cmd1;
case NAND_DEV_CMD1_RESTORE:
return &regs->orig_cmd1;
case NAND_DEV_CMD_VLD:
return &regs->vld;
case NAND_DEV_CMD_VLD_RESTORE:
return &regs->orig_vld;
case NAND_EBI2_ECC_BUF_CFG:
return &regs->ecc_buf_cfg;
case NAND_READ_LOCATION_0:
return &regs->read_location0;
case NAND_READ_LOCATION_1:
return &regs->read_location1;
case NAND_READ_LOCATION_2:
return &regs->read_location2;
case NAND_READ_LOCATION_3:
return &regs->read_location3;
case NAND_READ_LOCATION_LAST_CW_0:
return &regs->read_location_last0;
case NAND_READ_LOCATION_LAST_CW_1:
return &regs->read_location_last1;
case NAND_READ_LOCATION_LAST_CW_2:
return &regs->read_location_last2;
case NAND_READ_LOCATION_LAST_CW_3:
return &regs->read_location_last3;
default:
return NULL;
}
}
static void nandc_set_reg(struct nand_chip *chip, int offset,
u32 val)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nandc_regs *regs = nandc->regs;
__le32 *reg;
reg = offset_to_nandc_reg(regs, offset);
if (reg)
*reg = cpu_to_le32(val);
}
/* Helper to check the code word, whether it is last cw or not */
static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
{
return cw == (ecc->steps - 1);
}
/* helper to configure location register values */
static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
int cw_offset, int read_size, int is_last_read_loc)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int reg_base = NAND_READ_LOCATION_0;
if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
reg_base = NAND_READ_LOCATION_LAST_CW_0;
reg_base += reg * 4;
if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
return nandc_set_read_loc_last(chip, reg_base, cw_offset,
read_size, is_last_read_loc);
else
return nandc_set_read_loc_first(chip, reg_base, cw_offset,
read_size, is_last_read_loc);
}
/* helper to configure address register values */
static void set_address(struct qcom_nand_host *host, u16 column, int page)
{
struct nand_chip *chip = &host->chip;
if (chip->options & NAND_BUSWIDTH_16)
column >>= 1;
nandc_set_reg(chip, NAND_ADDR0, page << 16 | column);
nandc_set_reg(chip, NAND_ADDR1, page >> 16 & 0xff);
}
/*
* update_rw_regs: set up read/write register values, these will be
* written to the NAND controller registers via DMA
*
* @num_cw: number of steps for the read/write operation
* @read: read or write operation
* @cw : which code word
*/
static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, int cw)
{
struct nand_chip *chip = &host->chip;
u32 cmd, cfg0, cfg1, ecc_bch_cfg;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
if (read) {
if (host->use_ecc)
cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE;
else
cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE;
} else {
cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE;
}
if (host->use_ecc) {
cfg0 = (host->cfg0 & ~(7U << CW_PER_PAGE)) |
(num_cw - 1) << CW_PER_PAGE;
cfg1 = host->cfg1;
ecc_bch_cfg = host->ecc_bch_cfg;
} else {
cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) |
(num_cw - 1) << CW_PER_PAGE;
cfg1 = host->cfg1_raw;
ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
}
nandc_set_reg(chip, NAND_FLASH_CMD, cmd);
nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0);
nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1);
nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
if (!nandc->props->qpic_v2)
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
if (read)
nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
host->cw_data : host->cw_size, 1);
}
/*
* Maps the scatter gather list for DMA transfer and forms the DMA descriptor
* for BAM. This descriptor will be added in the NAND DMA descriptor queue
* which will be submitted to DMA engine.
*/
static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
struct dma_chan *chan,
unsigned long flags)
{
struct desc_info *desc;
struct scatterlist *sgl;
unsigned int sgl_cnt;
int ret;
struct bam_transaction *bam_txn = nandc->bam_txn;
enum dma_transfer_direction dir_eng;
struct dma_async_tx_descriptor *dma_desc;
desc = kzalloc(sizeof(*desc), GFP_KERNEL);
if (!desc)
return -ENOMEM;
if (chan == nandc->cmd_chan) {
sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start];
sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start;
bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos;
dir_eng = DMA_MEM_TO_DEV;
desc->dir = DMA_TO_DEVICE;
} else if (chan == nandc->tx_chan) {
sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start];
sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start;
bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos;
dir_eng = DMA_MEM_TO_DEV;
desc->dir = DMA_TO_DEVICE;
} else {
sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start];
sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start;
bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos;
dir_eng = DMA_DEV_TO_MEM;
desc->dir = DMA_FROM_DEVICE;
}
sg_mark_end(sgl + sgl_cnt - 1);
ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
if (ret == 0) {
dev_err(nandc->dev, "failure in mapping desc\n");
kfree(desc);
return -ENOMEM;
}
desc->sgl_cnt = sgl_cnt;
desc->bam_sgl = sgl;
dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng,
flags);
if (!dma_desc) {
dev_err(nandc->dev, "failure in prep desc\n");
dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
kfree(desc);
return -EINVAL;
}
desc->dma_desc = dma_desc;
/* update last data/command descriptor */
if (chan == nandc->cmd_chan)
bam_txn->last_cmd_desc = dma_desc;
else
bam_txn->last_data_desc = dma_desc;
list_add_tail(&desc->node, &nandc->desc_list);
return 0;
}
/*
* Prepares the command descriptor for BAM DMA which will be used for NAND
* register reads and writes. The command descriptor requires the command
* to be formed in command element type so this function uses the command
* element from bam transaction ce array and fills the same with required
* data. A single SGL can contain multiple command elements so
* NAND_BAM_NEXT_SGL will be used for starting the separate SGL
* after the current command element.
*/
static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
int reg_off, const void *vaddr,
int size, unsigned int flags)
{
int bam_ce_size;
int i, ret;
struct bam_cmd_element *bam_ce_buffer;
struct bam_transaction *bam_txn = nandc->bam_txn;
bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
/* fill the command desc */
for (i = 0; i < size; i++) {
if (read)
bam_prep_ce(&bam_ce_buffer[i],
nandc_reg_phys(nandc, reg_off + 4 * i),
BAM_READ_COMMAND,
reg_buf_dma_addr(nandc,
(__le32 *)vaddr + i));
else
bam_prep_ce_le32(&bam_ce_buffer[i],
nandc_reg_phys(nandc, reg_off + 4 * i),
BAM_WRITE_COMMAND,
*((__le32 *)vaddr + i));
}
bam_txn->bam_ce_pos += size;
/* use the separate sgl after this command */
if (flags & NAND_BAM_NEXT_SGL) {
bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
bam_ce_size = (bam_txn->bam_ce_pos -
bam_txn->bam_ce_start) *
sizeof(struct bam_cmd_element);
sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
bam_ce_buffer, bam_ce_size);
bam_txn->cmd_sgl_pos++;
bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
if (flags & NAND_BAM_NWD) {
ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
DMA_PREP_FENCE |
DMA_PREP_CMD);
if (ret)
return ret;
}
}
return 0;
}
/*
* Prepares the data descriptor for BAM DMA which will be used for NAND
* data reads and writes.
*/
static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
const void *vaddr,
int size, unsigned int flags)
{
int ret;
struct bam_transaction *bam_txn = nandc->bam_txn;
if (read) {
sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos],
vaddr, size);
bam_txn->rx_sgl_pos++;
} else {
sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos],
vaddr, size);
bam_txn->tx_sgl_pos++;
/*
* BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag
* is not set, form the DMA descriptor
*/
if (!(flags & NAND_BAM_NO_EOT)) {
ret = prepare_bam_async_desc(nandc, nandc->tx_chan,
DMA_PREP_INTERRUPT);
if (ret)
return ret;
}
}
return 0;
}
static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
int reg_off, const void *vaddr, int size,
bool flow_control)
{
struct desc_info *desc;
struct dma_async_tx_descriptor *dma_desc;
struct scatterlist *sgl;
struct dma_slave_config slave_conf;
struct qcom_adm_peripheral_config periph_conf = {};
enum dma_transfer_direction dir_eng;
int ret;
desc = kzalloc(sizeof(*desc), GFP_KERNEL);
if (!desc)
return -ENOMEM;
sgl = &desc->adm_sgl;
sg_init_one(sgl, vaddr, size);
if (read) {
dir_eng = DMA_DEV_TO_MEM;
desc->dir = DMA_FROM_DEVICE;
} else {
dir_eng = DMA_MEM_TO_DEV;
desc->dir = DMA_TO_DEVICE;
}
ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir);
if (ret == 0) {
ret = -ENOMEM;
goto err;
}
memset(&slave_conf, 0x00, sizeof(slave_conf));
slave_conf.device_fc = flow_control;
if (read) {
slave_conf.src_maxburst = 16;
slave_conf.src_addr = nandc->base_dma + reg_off;
if (nandc->data_crci) {
periph_conf.crci = nandc->data_crci;
slave_conf.peripheral_config = &periph_conf;
slave_conf.peripheral_size = sizeof(periph_conf);
}
} else {
slave_conf.dst_maxburst = 16;
slave_conf.dst_addr = nandc->base_dma + reg_off;
if (nandc->cmd_crci) {
periph_conf.crci = nandc->cmd_crci;
slave_conf.peripheral_config = &periph_conf;
slave_conf.peripheral_size = sizeof(periph_conf);
}
}
ret = dmaengine_slave_config(nandc->chan, &slave_conf);
if (ret) {
dev_err(nandc->dev, "failed to configure dma channel\n");
goto err;
}
dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0);
if (!dma_desc) {
dev_err(nandc->dev, "failed to prepare desc\n");
ret = -EINVAL;
goto err;
}
desc->dma_desc = dma_desc;
list_add_tail(&desc->node, &nandc->desc_list);
return 0;
err:
kfree(desc);
return ret;
}
/*
* read_reg_dma: prepares a descriptor to read a given number of
* contiguous registers to the reg_read_buf pointer
*
* @first: offset of the first register in the contiguous block
* @num_regs: number of registers to read
* @flags: flags to control DMA descriptor preparation
*/
static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
int num_regs, unsigned int flags)
{
bool flow_control = false;
void *vaddr;
vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
nandc->reg_read_pos += num_regs;
if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
first = dev_cmd_reg_addr(nandc, first);
if (nandc->props->is_bam)
return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
num_regs, flags);
if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
flow_control = true;
return prep_adm_dma_desc(nandc, true, first, vaddr,
num_regs * sizeof(u32), flow_control);
}
/*
* write_reg_dma: prepares a descriptor to write a given number of
* contiguous registers
*
* @first: offset of the first register in the contiguous block
* @num_regs: number of registers to write
* @flags: flags to control DMA descriptor preparation
*/
static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
int num_regs, unsigned int flags)
{
bool flow_control = false;
struct nandc_regs *regs = nandc->regs;
void *vaddr;
vaddr = offset_to_nandc_reg(regs, first);
if (first == NAND_ERASED_CW_DETECT_CFG) {
if (flags & NAND_ERASED_CW_SET)
vaddr = &regs->erased_cw_detect_cfg_set;
else
vaddr = &regs->erased_cw_detect_cfg_clr;
}
if (first == NAND_EXEC_CMD)
flags |= NAND_BAM_NWD;
if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1)
first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1);
if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
if (nandc->props->is_bam)
return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
num_regs, flags);
if (first == NAND_FLASH_CMD)
flow_control = true;
return prep_adm_dma_desc(nandc, false, first, vaddr,
num_regs * sizeof(u32), flow_control);
}
/*
* read_data_dma: prepares a DMA descriptor to transfer data from the
* controller's internal buffer to the buffer 'vaddr'
*
* @reg_off: offset within the controller's data buffer
* @vaddr: virtual address of the buffer we want to write to
* @size: DMA transaction size in bytes
* @flags: flags to control DMA descriptor preparation
*/
static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
const u8 *vaddr, int size, unsigned int flags)
{
if (nandc->props->is_bam)
return prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
return prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
}
/*
* write_data_dma: prepares a DMA descriptor to transfer data from
* 'vaddr' to the controller's internal buffer
*
* @reg_off: offset within the controller's data buffer
* @vaddr: virtual address of the buffer we want to read from
* @size: DMA transaction size in bytes
* @flags: flags to control DMA descriptor preparation
*/
static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
const u8 *vaddr, int size, unsigned int flags)
{
if (nandc->props->is_bam)
return prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
return prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
}
/*
* Helper to prepare DMA descriptors for configuring registers
* before reading a NAND page.
*/
static void config_nand_page_read(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
if (!nandc->props->qpic_v2)
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
}
/*
* Helper to prepare DMA descriptors for configuring registers
* before reading each codeword in NAND page.
*/
static void
config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int reg = NAND_READ_LOCATION_0;
if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
reg = NAND_READ_LOCATION_LAST_CW_0;
if (nandc->props->is_bam)
write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
if (use_ecc) {
read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
NAND_BAM_NEXT_SGL);
} else {
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
}
}
/*
* Helper to prepare dma descriptors to configure registers needed for reading a
* single codeword in page
*/
static void
config_nand_single_cw_page_read(struct nand_chip *chip,
bool use_ecc, int cw)
{
config_nand_page_read(chip);
config_nand_cw_read(chip, use_ecc, cw);
}
/*
* Helper to prepare DMA descriptors used to configure registers needed for
* before writing a NAND page.
*/
static void config_nand_page_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
if (!nandc->props->qpic_v2)
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
NAND_BAM_NEXT_SGL);
}
/*
* Helper to prepare DMA descriptors for configuring registers
* before writing each codeword in NAND page.
*/
static void config_nand_cw_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL);
}
/*
* the following functions are used within chip->legacy.cmdfunc() to
* perform different NAND_CMD_* commands
*/
/* sets up descriptors for NAND_CMD_PARAM */
static int nandc_param(struct qcom_nand_host *host)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
/*
* NAND_CMD_PARAM is called before we know much about the FLASH chip
* in use. we configure the controller to perform a raw read of 512
* bytes to read onfi params
*/
if (nandc->props->qpic_v2)
nandc_set_reg(chip, NAND_FLASH_CMD, OP_PAGE_READ_ONFI_READ |
PAGE_ACC | LAST_PAGE);
else
nandc_set_reg(chip, NAND_FLASH_CMD, OP_PAGE_READ |
PAGE_ACC | LAST_PAGE);
nandc_set_reg(chip, NAND_ADDR0, 0);
nandc_set_reg(chip, NAND_ADDR1, 0);
nandc_set_reg(chip, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
| 512 << UD_SIZE_BYTES
| 5 << NUM_ADDR_CYCLES
| 0 << SPARE_SIZE_BYTES);
nandc_set_reg(chip, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES
| 0 << CS_ACTIVE_BSY
| 17 << BAD_BLOCK_BYTE_NUM
| 1 << BAD_BLOCK_IN_SPARE_AREA
| 2 << WR_RD_BSY_GAP
| 0 << WIDE_FLASH
| 1 << DEV0_CFG1_ECC_DISABLE);
if (!nandc->props->qpic_v2)
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
/* configure CMD1 and VLD for ONFI param probing in QPIC v1 */
if (!nandc->props->qpic_v2) {
nandc_set_reg(chip, NAND_DEV_CMD_VLD,
(nandc->vld & ~READ_START_VLD));
nandc_set_reg(chip, NAND_DEV_CMD1,
(nandc->cmd1 & ~(0xFF << READ_ADDR))
| NAND_CMD_PARAM << READ_ADDR);
}
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
if (!nandc->props->qpic_v2) {
nandc_set_reg(chip, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
nandc_set_reg(chip, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
}
nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
if (!nandc->props->qpic_v2) {
write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
}
nandc->buf_count = 512;
memset(nandc->data_buffer, 0xff, nandc->buf_count);
config_nand_single_cw_page_read(chip, false, 0);
read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
nandc->buf_count, 0);
/* restore CMD1 and VLD regs */
if (!nandc->props->qpic_v2) {
write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0);
write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL);
}
return 0;
}
/* sets up descriptors for NAND_CMD_ERASE1 */
static int erase_block(struct qcom_nand_host *host, int page_addr)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
nandc_set_reg(chip, NAND_FLASH_CMD,
OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
nandc_set_reg(chip, NAND_ADDR0, page_addr);
nandc_set_reg(chip, NAND_ADDR1, 0);
nandc_set_reg(chip, NAND_DEV0_CFG0,
host->cfg0_raw & ~(7 << CW_PER_PAGE));
nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
write_reg_dma(nandc, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL);
return 0;
}
/* sets up descriptors for NAND_CMD_READID */
static int read_id(struct qcom_nand_host *host, int column)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
if (column == -1)
return 0;
nandc_set_reg(chip, NAND_FLASH_CMD, OP_FETCH_ID);
nandc_set_reg(chip, NAND_ADDR0, column);
nandc_set_reg(chip, NAND_ADDR1, 0);
nandc_set_reg(chip, NAND_FLASH_CHIP_SELECT,
nandc->props->is_bam ? 0 : DM_EN);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
return 0;
}
/* sets up descriptors for NAND_CMD_RESET */
static int reset(struct qcom_nand_host *host)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
nandc_set_reg(chip, NAND_FLASH_CMD, OP_RESET_DEVICE);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
return 0;
}
/* helpers to submit/free our list of dma descriptors */
static int submit_descs(struct qcom_nand_controller *nandc)
{
struct desc_info *desc;
dma_cookie_t cookie = 0;
struct bam_transaction *bam_txn = nandc->bam_txn;
int r;
if (nandc->props->is_bam) {
if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) {
r = prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
if (r)
return r;
}
if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) {
r = prepare_bam_async_desc(nandc, nandc->tx_chan,
DMA_PREP_INTERRUPT);
if (r)
return r;
}
if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
DMA_PREP_CMD);
if (r)
return r;
}
}
list_for_each_entry(desc, &nandc->desc_list, node)
cookie = dmaengine_submit(desc->dma_desc);
if (nandc->props->is_bam) {
bam_txn->last_cmd_desc->callback = qpic_bam_dma_done;
bam_txn->last_cmd_desc->callback_param = bam_txn;
if (bam_txn->last_data_desc) {
bam_txn->last_data_desc->callback = qpic_bam_dma_done;
bam_txn->last_data_desc->callback_param = bam_txn;
bam_txn->wait_second_completion = true;
}
dma_async_issue_pending(nandc->tx_chan);
dma_async_issue_pending(nandc->rx_chan);
dma_async_issue_pending(nandc->cmd_chan);
if (!wait_for_completion_timeout(&bam_txn->txn_done,
QPIC_NAND_COMPLETION_TIMEOUT))
return -ETIMEDOUT;
} else {
if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
return -ETIMEDOUT;
}
return 0;
}
static void free_descs(struct qcom_nand_controller *nandc)
{
struct desc_info *desc, *n;
list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
list_del(&desc->node);
if (nandc->props->is_bam)
dma_unmap_sg(nandc->dev, desc->bam_sgl,
desc->sgl_cnt, desc->dir);
else
dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1,
desc->dir);
kfree(desc);
}
}
/* reset the register read buffer for next NAND operation */
static void clear_read_regs(struct qcom_nand_controller *nandc)
{
nandc->reg_read_pos = 0;
nandc_read_buffer_sync(nandc, false);
}
static void pre_command(struct qcom_nand_host *host, int command)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
nandc->buf_count = 0;
nandc->buf_start = 0;
host->use_ecc = false;
host->last_command = command;
clear_read_regs(nandc);
if (command == NAND_CMD_RESET || command == NAND_CMD_READID ||
command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1)
clear_bam_transaction(nandc);
}
/*
* this is called after NAND_CMD_PAGEPROG and NAND_CMD_ERASE1 to set our
* privately maintained status byte, this status byte can be read after
* NAND_CMD_STATUS is called
*/
static void parse_erase_write_errors(struct qcom_nand_host *host, int command)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int num_cw;
int i;
num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1;
nandc_read_buffer_sync(nandc, true);
for (i = 0; i < num_cw; i++) {
u32 flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
if (flash_status & FS_MPU_ERR)
host->status &= ~NAND_STATUS_WP;
if (flash_status & FS_OP_ERR || (i == (num_cw - 1) &&
(flash_status &
FS_DEVICE_STS_ERR)))
host->status |= NAND_STATUS_FAIL;
}
}
static void post_command(struct qcom_nand_host *host, int command)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
switch (command) {
case NAND_CMD_READID:
nandc_read_buffer_sync(nandc, true);
memcpy(nandc->data_buffer, nandc->reg_read_buf,
nandc->buf_count);
break;
case NAND_CMD_PAGEPROG:
case NAND_CMD_ERASE1:
parse_erase_write_errors(host, command);
break;
default:
break;
}
}
/*
* Implements chip->legacy.cmdfunc. It's only used for a limited set of
* commands. The rest of the commands wouldn't be called by upper layers.
* For example, NAND_CMD_READOOB would never be called because we have our own
* versions of read_oob ops for nand_ecc_ctrl.
*/
static void qcom_nandc_command(struct nand_chip *chip, unsigned int command,
int column, int page_addr)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
bool wait = false;
int ret = 0;
pre_command(host, command);
switch (command) {
case NAND_CMD_RESET:
ret = reset(host);
wait = true;
break;
case NAND_CMD_READID:
nandc->buf_count = 4;
ret = read_id(host, column);
wait = true;
break;
case NAND_CMD_PARAM:
ret = nandc_param(host);
wait = true;
break;
case NAND_CMD_ERASE1:
ret = erase_block(host, page_addr);
wait = true;
break;
case NAND_CMD_READ0:
/* we read the entire page for now */
WARN_ON(column != 0);
host->use_ecc = true;
set_address(host, 0, page_addr);
update_rw_regs(host, ecc->steps, true, 0);
break;
case NAND_CMD_SEQIN:
WARN_ON(column != 0);
set_address(host, 0, page_addr);
break;
case NAND_CMD_PAGEPROG:
case NAND_CMD_STATUS:
case NAND_CMD_NONE:
default:
break;
}
if (ret) {
dev_err(nandc->dev, "failure executing command %d\n",
command);
free_descs(nandc);
return;
}
if (wait) {
ret = submit_descs(nandc);
if (ret)
dev_err(nandc->dev,
"failure submitting descs for command %d\n",
command);
}
free_descs(nandc);
post_command(host, command);
}
/*
* when using BCH ECC, the HW flags an error in NAND_FLASH_STATUS if it read
* an erased CW, and reports an erased CW in NAND_ERASED_CW_DETECT_STATUS.
*
* when using RS ECC, the HW reports the same erros when reading an erased CW,
* but it notifies that it is an erased CW by placing special characters at
* certain offsets in the buffer.
*
* verify if the page is erased or not, and fix up the page for RS ECC by
* replacing the special characters with 0xff.
*/
static bool erased_chunk_check_and_fixup(u8 *data_buf, int data_len)
{
u8 empty1, empty2;
/*
* an erased page flags an error in NAND_FLASH_STATUS, check if the page
* is erased by looking for 0x54s at offsets 3 and 175 from the
* beginning of each codeword
*/
empty1 = data_buf[3];
empty2 = data_buf[175];
/*
* if the erased codework markers, if they exist override them with
* 0xffs
*/
if ((empty1 == 0x54 && empty2 == 0xff) ||
(empty1 == 0xff && empty2 == 0x54)) {
data_buf[3] = 0xff;
data_buf[175] = 0xff;
}
/*
* check if the entire chunk contains 0xffs or not. if it doesn't, then
* restore the original values at the special offsets
*/
if (memchr_inv(data_buf, 0xff, data_len)) {
data_buf[3] = empty1;
data_buf[175] = empty2;
return false;
}
return true;
}
struct read_stats {
__le32 flash;
__le32 buffer;
__le32 erased_cw;
};
/* reads back FLASH_STATUS register set by the controller */
static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int i;
nandc_read_buffer_sync(nandc, true);
for (i = 0; i < cw_cnt; i++) {
u32 flash = le32_to_cpu(nandc->reg_read_buf[i]);
if (flash & (FS_OP_ERR | FS_MPU_ERR))
return -EIO;
}
return 0;
}
/* performs raw read for one codeword */
static int
qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
u8 *data_buf, u8 *oob_buf, int page, int cw)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int data_size1, data_size2, oob_size1, oob_size2;
int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
int raw_cw = cw;
nand_read_page_op(chip, page, 0, NULL, 0);
host->use_ecc = false;
if (nandc->props->qpic_v2)
raw_cw = ecc->steps - 1;
clear_bam_transaction(nandc);
set_address(host, host->cw_size * cw, page);
update_rw_regs(host, 1, true, raw_cw);
config_nand_page_read(chip);
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) * 4);
oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
host->spare_bytes;
} else {
data_size2 = host->cw_data - data_size1;
oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
}
if (nandc->props->is_bam) {
nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
read_loc += data_size1;
nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
read_loc += oob_size1;
nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
read_loc += data_size2;
nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
}
config_nand_cw_read(chip, false, raw_cw);
read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
reg_off += data_size1;
read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0);
reg_off += oob_size1;
read_data_dma(nandc, reg_off, data_buf + data_size1, data_size2, 0);
reg_off += data_size2;
read_data_dma(nandc, reg_off, oob_buf + oob_size1, oob_size2, 0);
ret = submit_descs(nandc);
free_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to read raw cw %d\n", cw);
return ret;
}
return check_flash_errors(host, 1);
}
/*
* Bitflips can happen in erased codewords also so this function counts the
* number of 0 in each CW for which ECC engine returns the uncorrectable
* error. The page will be assumed as erased if this count is less than or
* equal to the ecc->strength for each CW.
*
* 1. Both DATA and OOB need to be checked for number of 0. The
* top-level API can be called with only data buf or OOB buf so use
* chip->data_buf if data buf is null and chip->oob_poi if oob buf
* is null for copying the raw bytes.
* 2. Perform raw read for all the CW which has uncorrectable errors.
* 3. For each CW, check the number of 0 in cw_data and usable OOB bytes.
* The BBM and spare bytes bit flip won’t affect the ECC so don’t check
* the number of bitflips in this area.
*/
static int
check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
u8 *oob_buf, unsigned long uncorrectable_cws,
int page, unsigned int max_bitflips)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *cw_data_buf, *cw_oob_buf;
int cw, data_size, oob_size, ret = 0;
if (!data_buf)
data_buf = nand_get_data_buf(chip);
if (!oob_buf) {
nand_get_data_buf(chip);
oob_buf = chip->oob_poi;
}
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
if (qcom_nandc_is_last_cw(ecc, cw) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) * 4);
oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
} else {
data_size = host->cw_data;
oob_size = host->ecc_bytes_hw;
}
/* determine starting buffer address for current CW */
cw_data_buf = data_buf + (cw * host->cw_data);
cw_oob_buf = oob_buf + (cw * ecc->bytes);
ret = qcom_nandc_read_cw_raw(mtd, chip, cw_data_buf,
cw_oob_buf, page, cw);
if (ret)
return ret;
/*
* make sure it isn't an erased page reported
* as not-erased by HW because of a few bitflips
*/
ret = nand_check_erased_ecc_chunk(cw_data_buf, data_size,
cw_oob_buf + host->bbm_size,
oob_size, NULL,
0, ecc->strength);
if (ret < 0) {
mtd->ecc_stats.failed++;
} else {
mtd->ecc_stats.corrected += ret;
max_bitflips = max_t(unsigned int, max_bitflips, ret);
}
}
return max_bitflips;
}
/*
* reads back status registers set by the controller to notify page read
* errors. this is equivalent to what 'ecc->correct()' would do.
*/
static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
u8 *oob_buf, int page)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
unsigned int max_bitflips = 0, uncorrectable_cws = 0;
struct read_stats *buf;
bool flash_op_err = false, erased;
int i;
u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
buf = (struct read_stats *)nandc->reg_read_buf;
nandc_read_buffer_sync(nandc, true);
for (i = 0; i < ecc->steps; i++, buf++) {
u32 flash, buffer, erased_cw;
int data_len, oob_len;
if (qcom_nandc_is_last_cw(ecc, i)) {
data_len = ecc->size - ((ecc->steps - 1) << 2);
oob_len = ecc->steps << 2;
} else {
data_len = host->cw_data;
oob_len = 0;
}
flash = le32_to_cpu(buf->flash);
buffer = le32_to_cpu(buf->buffer);
erased_cw = le32_to_cpu(buf->erased_cw);
/*
* Check ECC failure for each codeword. ECC failure can
* happen in either of the following conditions
* 1. If number of bitflips are greater than ECC engine
* capability.
* 2. If this codeword contains all 0xff for which erased
* codeword detection check will be done.
*/
if ((flash & FS_OP_ERR) && (buffer & BS_UNCORRECTABLE_BIT)) {
/*
* For BCH ECC, ignore erased codeword errors, if
* ERASED_CW bits are set.
*/
if (host->bch_enabled) {
erased = (erased_cw & ERASED_CW) == ERASED_CW;
/*
* For RS ECC, HW reports the erased CW by placing
* special characters at certain offsets in the buffer.
* These special characters will be valid only if
* complete page is read i.e. data_buf is not NULL.
*/
} else if (data_buf) {
erased = erased_chunk_check_and_fixup(data_buf,
data_len);
} else {
erased = false;
}
if (!erased)
uncorrectable_cws |= BIT(i);
/*
* Check if MPU or any other operational error (timeout,
* device failure, etc.) happened for this codeword and
* make flash_op_err true. If flash_op_err is set, then
* EIO will be returned for page read.
*/
} else if (flash & (FS_OP_ERR | FS_MPU_ERR)) {
flash_op_err = true;
/*
* No ECC or operational errors happened. Check the number of
* bits corrected and update the ecc_stats.corrected.
*/
} else {
unsigned int stat;
stat = buffer & BS_CORRECTABLE_ERR_MSK;
mtd->ecc_stats.corrected += stat;
max_bitflips = max(max_bitflips, stat);
}
if (data_buf)
data_buf += data_len;
if (oob_buf)
oob_buf += oob_len + ecc->bytes;
}
if (flash_op_err)
return -EIO;
if (!uncorrectable_cws)
return max_bitflips;
return check_for_erased_page(host, data_buf_start, oob_buf_start,
uncorrectable_cws, page,
max_bitflips);
}
/*
* helper to perform the actual page read operation, used by ecc->read_page(),
* ecc->read_oob()
*/
static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
u8 *oob_buf, int page)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
int i, ret;
config_nand_page_read(chip);
/* queue cmd descs for each codeword */
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
} else {
data_size = host->cw_data;
oob_size = host->ecc_bytes_hw + host->spare_bytes;
}
if (nandc->props->is_bam) {
if (data_buf && oob_buf) {
nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
nandc_set_read_loc(chip, i, 1, data_size,
oob_size, 1);
} else if (data_buf) {
nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
} else {
nandc_set_read_loc(chip, i, 0, data_size,
oob_size, 1);
}
}
config_nand_cw_read(chip, true, i);
if (data_buf)
read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
data_size, 0);
/*
* when ecc is enabled, the controller doesn't read the real
* or dummy bad block markers in each chunk. To maintain a
* consistent layout across RAW and ECC reads, we just
* leave the real/dummy BBM offsets empty (i.e, filled with
* 0xffs)
*/
if (oob_buf) {
int j;
for (j = 0; j < host->bbm_size; j++)
*oob_buf++ = 0xff;
read_data_dma(nandc, FLASH_BUF_ACC + data_size,
oob_buf, oob_size, 0);
}
if (data_buf)
data_buf += data_size;
if (oob_buf)
oob_buf += oob_size;
}
ret = submit_descs(nandc);
free_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to read page/oob\n");
return ret;
}
return parse_read_errors(host, data_buf_start, oob_buf_start, page);
}
/*
* a helper that copies the last step/codeword of a page (containing free oob)
* into our local buffer
*/
static int copy_last_cw(struct qcom_nand_host *host, int page)
{
struct nand_chip *chip = &host->chip;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int size;
int ret;
clear_read_regs(nandc);
size = host->use_ecc ? host->cw_data : host->cw_size;
/* prepare a clean read buffer */
memset(nandc->data_buffer, 0xff, size);
set_address(host, host->cw_size * (ecc->steps - 1), page);
update_rw_regs(host, 1, true, ecc->steps - 1);
config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - 1);
read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
ret = submit_descs(nandc);
if (ret)
dev_err(nandc->dev, "failed to copy last codeword\n");
free_descs(nandc);
return ret;
}
static bool qcom_nandc_is_boot_partition(struct qcom_nand_host *host, int page)
{
struct qcom_nand_boot_partition *boot_partition;
u32 start, end;
int i;
/*
* Since the frequent access will be to the non-boot partitions like rootfs,
* optimize the page check by:
*
* 1. Checking if the page lies after the last boot partition.
* 2. Checking from the boot partition end.
*/
/* First check the last boot partition */
boot_partition = &host->boot_partitions[host->nr_boot_partitions - 1];
start = boot_partition->page_offset;
end = start + boot_partition->page_size;
/* Page is after the last boot partition end. This is NOT a boot partition */
if (page > end)
return false;
/* Actually check if it's a boot partition */
if (page < end && page >= start)
return true;
/* Check the other boot partitions starting from the second-last partition */
for (i = host->nr_boot_partitions - 2; i >= 0; i--) {
boot_partition = &host->boot_partitions[i];
start = boot_partition->page_offset;
end = start + boot_partition->page_size;
if (page < end && page >= start)
return true;
}
return false;
}
static void qcom_nandc_codeword_fixup(struct qcom_nand_host *host, int page)
{
bool codeword_fixup = qcom_nandc_is_boot_partition(host, page);
/* Skip conf write if we are already in the correct mode */
if (codeword_fixup == host->codeword_fixup)
return;
host->codeword_fixup = codeword_fixup;
host->cw_data = codeword_fixup ? 512 : 516;
host->spare_bytes = host->cw_size - host->ecc_bytes_hw -
host->bbm_size - host->cw_data;
host->cfg0 &= ~(SPARE_SIZE_BYTES_MASK | UD_SIZE_BYTES_MASK);
host->cfg0 |= host->spare_bytes << SPARE_SIZE_BYTES |
host->cw_data << UD_SIZE_BYTES;
host->ecc_bch_cfg &= ~ECC_NUM_DATA_BYTES_MASK;
host->ecc_bch_cfg |= host->cw_data << ECC_NUM_DATA_BYTES;
host->ecc_buf_cfg = (host->cw_data - 1) << NUM_STEPS;
}
/* implements ecc->read_page() */
static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
u8 *data_buf, *oob_buf = NULL;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
nand_read_page_op(chip, page, 0, NULL, 0);
data_buf = buf;
oob_buf = oob_required ? chip->oob_poi : NULL;
clear_bam_transaction(nandc);
return read_page_ecc(host, data_buf, oob_buf, page);
}
/* implements ecc->read_page_raw() */
static int qcom_nandc_read_page_raw(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int cw, ret;
u8 *data_buf = buf, *oob_buf = chip->oob_poi;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
for (cw = 0; cw < ecc->steps; cw++) {
ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
page, cw);
if (ret)
return ret;
data_buf += host->cw_data;
oob_buf += ecc->bytes;
}
return 0;
}
/* implements ecc->read_oob() */
static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
clear_read_regs(nandc);
clear_bam_transaction(nandc);
host->use_ecc = true;
set_address(host, 0, page);
update_rw_regs(host, ecc->steps, true, 0);
return read_page_ecc(host, NULL, chip->oob_poi, page);
}
/* implements ecc->write_page() */
static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
int oob_required, int page)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *data_buf, *oob_buf;
int i, ret;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
clear_bam_transaction(nandc);
data_buf = (u8 *)buf;
oob_buf = chip->oob_poi;
host->use_ecc = true;
update_rw_regs(host, ecc->steps, false, 0);
config_nand_page_write(chip);
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
} else {
data_size = host->cw_data;
oob_size = ecc->bytes;
}
write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size,
i == (ecc->steps - 1) ? NAND_BAM_NO_EOT : 0);
/*
* when ECC is enabled, we don't really need to write anything
* to oob for the first n - 1 codewords since these oob regions
* just contain ECC bytes that's written by the controller
* itself. For the last codeword, we skip the bbm positions and
* write to the free oob area.
*/
if (qcom_nandc_is_last_cw(ecc, i)) {
oob_buf += host->bbm_size;
write_data_dma(nandc, FLASH_BUF_ACC + data_size,
oob_buf, oob_size, 0);
}
config_nand_cw_write(chip);
data_buf += data_size;
oob_buf += oob_size;
}
ret = submit_descs(nandc);
if (ret)
dev_err(nandc->dev, "failure to write page\n");
free_descs(nandc);
if (!ret)
ret = nand_prog_page_end_op(chip);
return ret;
}
/* implements ecc->write_page_raw() */
static int qcom_nandc_write_page_raw(struct nand_chip *chip,
const uint8_t *buf, int oob_required,
int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *data_buf, *oob_buf;
int i, ret;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
clear_bam_transaction(nandc);
data_buf = (u8 *)buf;
oob_buf = chip->oob_poi;
host->use_ecc = false;
update_rw_regs(host, ecc->steps, false, 0);
config_nand_page_write(chip);
for (i = 0; i < ecc->steps; i++) {
int data_size1, data_size2, oob_size1, oob_size2;
int reg_off = FLASH_BUF_ACC;
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
if (qcom_nandc_is_last_cw(ecc, i) && !host->codeword_fixup) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) << 2);
oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
} else {
data_size2 = host->cw_data - data_size1;
oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
}
write_data_dma(nandc, reg_off, data_buf, data_size1,
NAND_BAM_NO_EOT);
reg_off += data_size1;
data_buf += data_size1;
write_data_dma(nandc, reg_off, oob_buf, oob_size1,
NAND_BAM_NO_EOT);
reg_off += oob_size1;
oob_buf += oob_size1;
write_data_dma(nandc, reg_off, data_buf, data_size2,
NAND_BAM_NO_EOT);
reg_off += data_size2;
data_buf += data_size2;
write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
oob_buf += oob_size2;
config_nand_cw_write(chip);
}
ret = submit_descs(nandc);
if (ret)
dev_err(nandc->dev, "failure to write raw page\n");
free_descs(nandc);
if (!ret)
ret = nand_prog_page_end_op(chip);
return ret;
}
/*
* implements ecc->write_oob()
*
* the NAND controller cannot write only data or only OOB within a codeword
* since ECC is calculated for the combined codeword. So update the OOB from
* chip->oob_poi, and pad the data area with OxFF before writing.
*/
static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
u8 *oob = chip->oob_poi;
int data_size, oob_size;
int ret;
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
host->use_ecc = true;
clear_bam_transaction(nandc);
/* calculate the data and oob size for the last codeword/step */
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = mtd->oobavail;
memset(nandc->data_buffer, 0xff, host->cw_data);
/* override new oob content to last codeword */
mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
0, mtd->oobavail);
set_address(host, host->cw_size * (ecc->steps - 1), page);
update_rw_regs(host, 1, false, 0);
config_nand_page_write(chip);
write_data_dma(nandc, FLASH_BUF_ACC,
nandc->data_buffer, data_size + oob_size, 0);
config_nand_cw_write(chip);
ret = submit_descs(nandc);
free_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to write oob\n");
return -EIO;
}
return nand_prog_page_end_op(chip);
}
static int qcom_nandc_block_bad(struct nand_chip *chip, loff_t ofs)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int page, ret, bbpos, bad = 0;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
/*
* configure registers for a raw sub page read, the address is set to
* the beginning of the last codeword, we don't care about reading ecc
* portion of oob. we just want the first few bytes from this codeword
* that contains the BBM
*/
host->use_ecc = false;
clear_bam_transaction(nandc);
ret = copy_last_cw(host, page);
if (ret)
goto err;
if (check_flash_errors(host, 1)) {
dev_warn(nandc->dev, "error when trying to read BBM\n");
goto err;
}
bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
bad = nandc->data_buffer[bbpos] != 0xff;
if (chip->options & NAND_BUSWIDTH_16)
bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff);
err:
return bad;
}
static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
int page, ret;
clear_read_regs(nandc);
clear_bam_transaction(nandc);
/*
* to mark the BBM as bad, we flash the entire last codeword with 0s.
* we don't care about the rest of the content in the codeword since
* we aren't going to use this block again
*/
memset(nandc->data_buffer, 0x00, host->cw_size);
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
/* prepare write */
host->use_ecc = false;
set_address(host, host->cw_size * (ecc->steps - 1), page);
update_rw_regs(host, 1, false, ecc->steps - 1);
config_nand_page_write(chip);
write_data_dma(nandc, FLASH_BUF_ACC,
nandc->data_buffer, host->cw_size, 0);
config_nand_cw_write(chip);
ret = submit_descs(nandc);
free_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to update BBM\n");
return -EIO;
}
return nand_prog_page_end_op(chip);
}
/*
* the three functions below implement chip->legacy.read_byte(),
* chip->legacy.read_buf() and chip->legacy.write_buf() respectively. these
* aren't used for reading/writing page data, they are used for smaller data
* like reading id, status etc
*/
static uint8_t qcom_nandc_read_byte(struct nand_chip *chip)
{
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
u8 *buf = nandc->data_buffer;
u8 ret = 0x0;
if (host->last_command == NAND_CMD_STATUS) {
ret = host->status;
host->status = NAND_STATUS_READY | NAND_STATUS_WP;
return ret;
}
if (nandc->buf_start < nandc->buf_count)
ret = buf[nandc->buf_start++];
return ret;
}
static void qcom_nandc_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start);
memcpy(buf, nandc->data_buffer + nandc->buf_start, real_len);
nandc->buf_start += real_len;
}
static void qcom_nandc_write_buf(struct nand_chip *chip, const uint8_t *buf,
int len)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start);
memcpy(nandc->data_buffer + nandc->buf_start, buf, real_len);
nandc->buf_start += real_len;
}
/* we support only one external chip for now */
static void qcom_nandc_select_chip(struct nand_chip *chip, int chipnr)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
if (chipnr <= 0)
return;
dev_warn(nandc->dev, "invalid chip select\n");
}
/*
* NAND controller page layout info
*
* Layout with ECC enabled:
*
* |----------------------| |---------------------------------|
* | xx.......yy| | *********xx.......yy|
* | DATA xx..ECC..yy| | DATA **SPARE**xx..ECC..yy|
* | (516) xx.......yy| | (516-n*4) **(n*4)**xx.......yy|
* | xx.......yy| | *********xx.......yy|
* |----------------------| |---------------------------------|
* codeword 1,2..n-1 codeword n
* <---(528/532 Bytes)--> <-------(528/532 Bytes)--------->
*
* n = Number of codewords in the page
* . = ECC bytes
* * = Spare/free bytes
* x = Unused byte(s)
* y = Reserved byte(s)
*
* 2K page: n = 4, spare = 16 bytes
* 4K page: n = 8, spare = 32 bytes
* 8K page: n = 16, spare = 64 bytes
*
* the qcom nand controller operates at a sub page/codeword level. each
* codeword is 528 and 532 bytes for 4 bit and 8 bit ECC modes respectively.
* the number of ECC bytes vary based on the ECC strength and the bus width.
*
* the first n - 1 codewords contains 516 bytes of user data, the remaining
* 12/16 bytes consist of ECC and reserved data. The nth codeword contains
* both user data and spare(oobavail) bytes that sum up to 516 bytes.
*
* When we access a page with ECC enabled, the reserved bytes(s) are not
* accessible at all. When reading, we fill up these unreadable positions
* with 0xffs. When writing, the controller skips writing the inaccessible
* bytes.
*
* Layout with ECC disabled:
*
* |------------------------------| |---------------------------------------|
* | yy xx.......| | bb *********xx.......|
* | DATA1 yy DATA2 xx..ECC..| | DATA1 bb DATA2 **SPARE**xx..ECC..|
* | (size1) yy (size2) xx.......| | (size1) bb (size2) **(n*4)**xx.......|
* | yy xx.......| | bb *********xx.......|
* |------------------------------| |---------------------------------------|
* codeword 1,2..n-1 codeword n
* <-------(528/532 Bytes)------> <-----------(528/532 Bytes)----------->
*
* n = Number of codewords in the page
* . = ECC bytes
* * = Spare/free bytes
* x = Unused byte(s)
* y = Dummy Bad Bock byte(s)
* b = Real Bad Block byte(s)
* size1/size2 = function of codeword size and 'n'
*
* when the ECC block is disabled, one reserved byte (or two for 16 bit bus
* width) is now accessible. For the first n - 1 codewords, these are dummy Bad
* Block Markers. In the last codeword, this position contains the real BBM
*
* In order to have a consistent layout between RAW and ECC modes, we assume
* the following OOB layout arrangement:
*
* |-----------| |--------------------|
* |yyxx.......| |bb*********xx.......|
* |yyxx..ECC..| |bb*FREEOOB*xx..ECC..|
* |yyxx.......| |bb*********xx.......|
* |yyxx.......| |bb*********xx.......|
* |-----------| |--------------------|
* first n - 1 nth OOB region
* OOB regions
*
* n = Number of codewords in the page
* . = ECC bytes
* * = FREE OOB bytes
* y = Dummy bad block byte(s) (inaccessible when ECC enabled)
* x = Unused byte(s)
* b = Real bad block byte(s) (inaccessible when ECC enabled)
*
* This layout is read as is when ECC is disabled. When ECC is enabled, the
* inaccessible Bad Block byte(s) are ignored when we write to a page/oob,
* and assumed as 0xffs when we read a page/oob. The ECC, unused and
* dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is
* the sum of the three).
*/
static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section > 1)
return -ERANGE;
if (!section) {
oobregion->length = (ecc->bytes * (ecc->steps - 1)) +
host->bbm_size;
oobregion->offset = 0;
} else {
oobregion->length = host->ecc_bytes_hw + host->spare_bytes;
oobregion->offset = mtd->oobsize - oobregion->length;
}
return 0;
}
static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (section)
return -ERANGE;
oobregion->length = ecc->steps * 4;
oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size;
return 0;
}
static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = {
.ecc = qcom_nand_ooblayout_ecc,
.free = qcom_nand_ooblayout_free,
};
static int
qcom_nandc_calc_ecc_bytes(int step_size, int strength)
{
return strength == 4 ? 12 : 16;
}
NAND_ECC_CAPS_SINGLE(qcom_nandc_ecc_caps, qcom_nandc_calc_ecc_bytes,
NANDC_STEP_SIZE, 4, 8);
static int qcom_nand_attach_chip(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_host *host = to_qcom_nand_host(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int cwperpage, bad_block_byte, ret;
bool wide_bus;
int ecc_mode = 1;
/* controller only supports 512 bytes data steps */
ecc->size = NANDC_STEP_SIZE;
wide_bus = chip->options & NAND_BUSWIDTH_16 ? true : false;
cwperpage = mtd->writesize / NANDC_STEP_SIZE;
/*
* Each CW has 4 available OOB bytes which will be protected with ECC
* so remaining bytes can be used for ECC.
*/
ret = nand_ecc_choose_conf(chip, &qcom_nandc_ecc_caps,
mtd->oobsize - (cwperpage * 4));
if (ret) {
dev_err(nandc->dev, "No valid ECC settings possible\n");
return ret;
}
if (ecc->strength >= 8) {
/* 8 bit ECC defaults to BCH ECC on all platforms */
host->bch_enabled = true;
ecc_mode = 1;
if (wide_bus) {
host->ecc_bytes_hw = 14;
host->spare_bytes = 0;
host->bbm_size = 2;
} else {
host->ecc_bytes_hw = 13;
host->spare_bytes = 2;
host->bbm_size = 1;
}
} else {
/*
* if the controller supports BCH for 4 bit ECC, the controller
* uses lesser bytes for ECC. If RS is used, the ECC bytes is
* always 10 bytes
*/
if (nandc->props->ecc_modes & ECC_BCH_4BIT) {
/* BCH */
host->bch_enabled = true;
ecc_mode = 0;
if (wide_bus) {
host->ecc_bytes_hw = 8;
host->spare_bytes = 2;
host->bbm_size = 2;
} else {
host->ecc_bytes_hw = 7;
host->spare_bytes = 4;
host->bbm_size = 1;
}
} else {
/* RS */
host->ecc_bytes_hw = 10;
if (wide_bus) {
host->spare_bytes = 0;
host->bbm_size = 2;
} else {
host->spare_bytes = 1;
host->bbm_size = 1;
}
}
}
/*
* we consider ecc->bytes as the sum of all the non-data content in a
* step. It gives us a clean representation of the oob area (even if
* all the bytes aren't used for ECC).It is always 16 bytes for 8 bit
* ECC and 12 bytes for 4 bit ECC
*/
ecc->bytes = host->ecc_bytes_hw + host->spare_bytes + host->bbm_size;
ecc->read_page = qcom_nandc_read_page;
ecc->read_page_raw = qcom_nandc_read_page_raw;
ecc->read_oob = qcom_nandc_read_oob;
ecc->write_page = qcom_nandc_write_page;
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
/* Free the initially allocated BAM transaction for reading the ONFI params */
if (nandc->props->is_bam)
free_bam_transaction(nandc);
nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
cwperpage);
/* Now allocate the BAM transaction based on updated max_cwperpage */
if (nandc->props->is_bam) {
nandc->bam_txn = alloc_bam_transaction(nandc);
if (!nandc->bam_txn) {
dev_err(nandc->dev,
"failed to allocate bam transaction\n");
return -ENOMEM;
}
}
/*
* DATA_UD_BYTES varies based on whether the read/write command protects
* spare data with ECC too. We protect spare data by default, so we set
* it to main + spare data, which are 512 and 4 bytes respectively.
*/
host->cw_data = 516;
/*
* total bytes in a step, either 528 bytes for 4 bit ECC, or 532 bytes
* for 8 bit ECC
*/
host->cw_size = host->cw_data + ecc->bytes;
bad_block_byte = mtd->writesize - host->cw_size * (cwperpage - 1) + 1;
host->cfg0 = (cwperpage - 1) << CW_PER_PAGE
| host->cw_data << UD_SIZE_BYTES
| 0 << DISABLE_STATUS_AFTER_WRITE
| 5 << NUM_ADDR_CYCLES
| host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
| 0 << STATUS_BFR_READ
| 1 << SET_RD_MODE_AFTER_STATUS
| host->spare_bytes << SPARE_SIZE_BYTES;
host->cfg1 = 7 << NAND_RECOVERY_CYCLES
| 0 << CS_ACTIVE_BSY
| bad_block_byte << BAD_BLOCK_BYTE_NUM
| 0 << BAD_BLOCK_IN_SPARE_AREA
| 2 << WR_RD_BSY_GAP
| wide_bus << WIDE_FLASH
| host->bch_enabled << ENABLE_BCH_ECC;
host->cfg0_raw = (cwperpage - 1) << CW_PER_PAGE
| host->cw_size << UD_SIZE_BYTES
| 5 << NUM_ADDR_CYCLES
| 0 << SPARE_SIZE_BYTES;
host->cfg1_raw = 7 << NAND_RECOVERY_CYCLES
| 0 << CS_ACTIVE_BSY
| 17 << BAD_BLOCK_BYTE_NUM
| 1 << BAD_BLOCK_IN_SPARE_AREA
| 2 << WR_RD_BSY_GAP
| wide_bus << WIDE_FLASH
| 1 << DEV0_CFG1_ECC_DISABLE;
host->ecc_bch_cfg = !host->bch_enabled << ECC_CFG_ECC_DISABLE
| 0 << ECC_SW_RESET
| host->cw_data << ECC_NUM_DATA_BYTES
| 1 << ECC_FORCE_CLK_OPEN
| ecc_mode << ECC_MODE
| host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;
if (!nandc->props->qpic_v2)
host->ecc_buf_cfg = 0x203 << NUM_STEPS;
host->clrflashstatus = FS_READY_BSY_N;
host->clrreadstatus = 0xc0;
nandc->regs->erased_cw_detect_cfg_clr =
cpu_to_le32(CLR_ERASED_PAGE_DET);
nandc->regs->erased_cw_detect_cfg_set =
cpu_to_le32(SET_ERASED_PAGE_DET);
dev_dbg(nandc->dev,
"cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n",
host->cfg0, host->cfg1, host->ecc_buf_cfg, host->ecc_bch_cfg,
host->cw_size, host->cw_data, ecc->strength, ecc->bytes,
cwperpage);
return 0;
}
static const struct nand_controller_ops qcom_nandc_ops = {
.attach_chip = qcom_nand_attach_chip,
};
static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
{
if (nandc->props->is_bam) {
if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
dma_unmap_single(nandc->dev, nandc->reg_read_dma,
MAX_REG_RD *
sizeof(*nandc->reg_read_buf),
DMA_FROM_DEVICE);
if (nandc->tx_chan)
dma_release_channel(nandc->tx_chan);
if (nandc->rx_chan)
dma_release_channel(nandc->rx_chan);
if (nandc->cmd_chan)
dma_release_channel(nandc->cmd_chan);
} else {
if (nandc->chan)
dma_release_channel(nandc->chan);
}
}
static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
{
int ret;
ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(nandc->dev, "failed to set DMA mask\n");
return ret;
}
/*
* we use the internal buffer for reading ONFI params, reading small
* data like ID and status, and preforming read-copy-write operations
* when writing to a codeword partially. 532 is the maximum possible
* size of a codeword for our nand controller
*/
nandc->buf_size = 532;
nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size,
GFP_KERNEL);
if (!nandc->data_buffer)
return -ENOMEM;
nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs),
GFP_KERNEL);
if (!nandc->regs)
return -ENOMEM;
nandc->reg_read_buf = devm_kcalloc(nandc->dev,
MAX_REG_RD, sizeof(*nandc->reg_read_buf),
GFP_KERNEL);
if (!nandc->reg_read_buf)
return -ENOMEM;
if (nandc->props->is_bam) {
nandc->reg_read_dma =
dma_map_single(nandc->dev, nandc->reg_read_buf,
MAX_REG_RD *
sizeof(*nandc->reg_read_buf),
DMA_FROM_DEVICE);
if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) {
dev_err(nandc->dev, "failed to DMA MAP reg buffer\n");
return -EIO;
}
nandc->tx_chan = dma_request_chan(nandc->dev, "tx");
if (IS_ERR(nandc->tx_chan)) {
ret = PTR_ERR(nandc->tx_chan);
nandc->tx_chan = NULL;
dev_err_probe(nandc->dev, ret,
"tx DMA channel request failed\n");
goto unalloc;
}
nandc->rx_chan = dma_request_chan(nandc->dev, "rx");
if (IS_ERR(nandc->rx_chan)) {
ret = PTR_ERR(nandc->rx_chan);
nandc->rx_chan = NULL;
dev_err_probe(nandc->dev, ret,
"rx DMA channel request failed\n");
goto unalloc;
}
nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd");
if (IS_ERR(nandc->cmd_chan)) {
ret = PTR_ERR(nandc->cmd_chan);
nandc->cmd_chan = NULL;
dev_err_probe(nandc->dev, ret,
"cmd DMA channel request failed\n");
goto unalloc;
}
/*
* Initially allocate BAM transaction to read ONFI param page.
* After detecting all the devices, this BAM transaction will
* be freed and the next BAM tranasction will be allocated with
* maximum codeword size
*/
nandc->max_cwperpage = 1;
nandc->bam_txn = alloc_bam_transaction(nandc);
if (!nandc->bam_txn) {
dev_err(nandc->dev,
"failed to allocate bam transaction\n");
ret = -ENOMEM;
goto unalloc;
}
} else {
nandc->chan = dma_request_chan(nandc->dev, "rxtx");
if (IS_ERR(nandc->chan)) {
ret = PTR_ERR(nandc->chan);
nandc->chan = NULL;
dev_err_probe(nandc->dev, ret,
"rxtx DMA channel request failed\n");
return ret;
}
}
INIT_LIST_HEAD(&nandc->desc_list);
INIT_LIST_HEAD(&nandc->host_list);
nand_controller_init(&nandc->controller);
nandc->controller.ops = &qcom_nandc_ops;
return 0;
unalloc:
qcom_nandc_unalloc(nandc);
return ret;
}
/* one time setup of a few nand controller registers */
static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
{
u32 nand_ctrl;
/* kill onenand */
if (!nandc->props->is_qpic)
nandc_write(nandc, SFLASHC_BURST_CFG, 0);
if (!nandc->props->qpic_v2)
nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD),
NAND_DEV_CMD_VLD_VAL);
/* enable ADM or BAM DMA */
if (nandc->props->is_bam) {
nand_ctrl = nandc_read(nandc, NAND_CTRL);
/*
*NAND_CTRL is an operational registers, and CPU
* access to operational registers are read only
* in BAM mode. So update the NAND_CTRL register
* only if it is not in BAM mode. In most cases BAM
* mode will be enabled in bootloader
*/
if (!(nand_ctrl & BAM_MODE_EN))
nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
} else {
nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
}
/* save the original values of these registers */
if (!nandc->props->qpic_v2) {
nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1));
nandc->vld = NAND_DEV_CMD_VLD_VAL;
}
return 0;
}
static const char * const probes[] = { "cmdlinepart", "ofpart", "qcomsmem", NULL };
static int qcom_nand_host_parse_boot_partitions(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct qcom_nand_boot_partition *boot_partition;
struct device *dev = nandc->dev;
int partitions_count, i, j, ret;
if (!of_property_present(dn, "qcom,boot-partitions"))
return 0;
partitions_count = of_property_count_u32_elems(dn, "qcom,boot-partitions");
if (partitions_count <= 0) {
dev_err(dev, "Error parsing boot partition\n");
return partitions_count ? partitions_count : -EINVAL;
}
host->nr_boot_partitions = partitions_count / 2;
host->boot_partitions = devm_kcalloc(dev, host->nr_boot_partitions,
sizeof(*host->boot_partitions), GFP_KERNEL);
if (!host->boot_partitions) {
host->nr_boot_partitions = 0;
return -ENOMEM;
}
for (i = 0, j = 0; i < host->nr_boot_partitions; i++, j += 2) {
boot_partition = &host->boot_partitions[i];
ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j,
&boot_partition->page_offset);
if (ret) {
dev_err(dev, "Error parsing boot partition offset at index %d\n", i);
host->nr_boot_partitions = 0;
return ret;
}
if (boot_partition->page_offset % mtd->writesize) {
dev_err(dev, "Boot partition offset not multiple of writesize at index %i\n",
i);
host->nr_boot_partitions = 0;
return -EINVAL;
}
/* Convert offset to nand pages */
boot_partition->page_offset /= mtd->writesize;
ret = of_property_read_u32_index(dn, "qcom,boot-partitions", j + 1,
&boot_partition->page_size);
if (ret) {
dev_err(dev, "Error parsing boot partition size at index %d\n", i);
host->nr_boot_partitions = 0;
return ret;
}
if (boot_partition->page_size % mtd->writesize) {
dev_err(dev, "Boot partition size not multiple of writesize at index %i\n",
i);
host->nr_boot_partitions = 0;
return -EINVAL;
}
/* Convert size to nand pages */
boot_partition->page_size /= mtd->writesize;
}
return 0;
}
static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
struct qcom_nand_host *host,
struct device_node *dn)
{
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct device *dev = nandc->dev;
int ret;
ret = of_property_read_u32(dn, "reg", &host->cs);
if (ret) {
dev_err(dev, "can't get chip-select\n");
return -ENXIO;
}
nand_set_flash_node(chip, dn);
mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs);
if (!mtd->name)
return -ENOMEM;
mtd->owner = THIS_MODULE;
mtd->dev.parent = dev;
chip->legacy.cmdfunc = qcom_nandc_command;
chip->legacy.select_chip = qcom_nandc_select_chip;
chip->legacy.read_byte = qcom_nandc_read_byte;
chip->legacy.read_buf = qcom_nandc_read_buf;
chip->legacy.write_buf = qcom_nandc_write_buf;
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
/*
* the bad block marker is readable only when we read the last codeword
* of a page with ECC disabled. currently, the nand_base and nand_bbt
* helpers don't allow us to read BB from a nand chip with ECC
* disabled (MTD_OPS_PLACE_OOB is set by default). use the block_bad
* and block_markbad helpers until we permanently switch to using
* MTD_OPS_RAW for all drivers (with the help of badblockbits)
*/
chip->legacy.block_bad = qcom_nandc_block_bad;
chip->legacy.block_markbad = qcom_nandc_block_markbad;
chip->controller = &nandc->controller;
chip->options |= NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA |
NAND_SKIP_BBTSCAN;
/* set up initial status value */
host->status = NAND_STATUS_READY | NAND_STATUS_WP;
ret = nand_scan(chip, 1);
if (ret)
return ret;
ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
if (ret)
goto err;
if (nandc->props->use_codeword_fixup) {
ret = qcom_nand_host_parse_boot_partitions(nandc, host, dn);
if (ret)
goto err;
}
return 0;
err:
nand_cleanup(chip);
return ret;
}
static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
{
struct device *dev = nandc->dev;
struct device_node *dn = dev->of_node, *child;
struct qcom_nand_host *host;
int ret = -ENODEV;
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host) {
of_node_put(child);
return -ENOMEM;
}
ret = qcom_nand_host_init_and_register(nandc, host, child);
if (ret) {
devm_kfree(dev, host);
continue;
}
list_add_tail(&host->node, &nandc->host_list);
}
return ret;
}
/* parse custom DT properties here */
static int qcom_nandc_parse_dt(struct platform_device *pdev)
{
struct qcom_nand_controller *nandc = platform_get_drvdata(pdev);
struct device_node *np = nandc->dev->of_node;
int ret;
if (!nandc->props->is_bam) {
ret = of_property_read_u32(np, "qcom,cmd-crci",
&nandc->cmd_crci);
if (ret) {
dev_err(nandc->dev, "command CRCI unspecified\n");
return ret;
}
ret = of_property_read_u32(np, "qcom,data-crci",
&nandc->data_crci);
if (ret) {
dev_err(nandc->dev, "data CRCI unspecified\n");
return ret;
}
}
return 0;
}
static int qcom_nandc_probe(struct platform_device *pdev)
{
struct qcom_nand_controller *nandc;
const void *dev_data;
struct device *dev = &pdev->dev;
struct resource *res;
int ret;
nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL);
if (!nandc)
return -ENOMEM;
platform_set_drvdata(pdev, nandc);
nandc->dev = dev;
dev_data = of_device_get_match_data(dev);
if (!dev_data) {
dev_err(&pdev->dev, "failed to get device data\n");
return -ENODEV;
}
nandc->props = dev_data;
nandc->core_clk = devm_clk_get(dev, "core");
if (IS_ERR(nandc->core_clk))
return PTR_ERR(nandc->core_clk);
nandc->aon_clk = devm_clk_get(dev, "aon");
if (IS_ERR(nandc->aon_clk))
return PTR_ERR(nandc->aon_clk);
ret = qcom_nandc_parse_dt(pdev);
if (ret)
return ret;
nandc->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(nandc->base))
return PTR_ERR(nandc->base);
nandc->base_phys = res->start;
nandc->base_dma = dma_map_resource(dev, res->start,
resource_size(res),
DMA_BIDIRECTIONAL, 0);
if (dma_mapping_error(dev, nandc->base_dma))
return -ENXIO;
ret = clk_prepare_enable(nandc->core_clk);
if (ret)
goto err_core_clk;
ret = clk_prepare_enable(nandc->aon_clk);
if (ret)
goto err_aon_clk;
ret = qcom_nandc_alloc(nandc);
if (ret)
goto err_nandc_alloc;
ret = qcom_nandc_setup(nandc);
if (ret)
goto err_setup;
ret = qcom_probe_nand_devices(nandc);
if (ret)
goto err_setup;
return 0;
err_setup:
qcom_nandc_unalloc(nandc);
err_nandc_alloc:
clk_disable_unprepare(nandc->aon_clk);
err_aon_clk:
clk_disable_unprepare(nandc->core_clk);
err_core_clk:
dma_unmap_resource(dev, res->start, resource_size(res),
DMA_BIDIRECTIONAL, 0);
return ret;
}
static void qcom_nandc_remove(struct platform_device *pdev)
{
struct qcom_nand_controller *nandc = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct qcom_nand_host *host;
struct nand_chip *chip;
int ret;
list_for_each_entry(host, &nandc->host_list, node) {
chip = &host->chip;
ret = mtd_device_unregister(nand_to_mtd(chip));
WARN_ON(ret);
nand_cleanup(chip);
}
qcom_nandc_unalloc(nandc);
clk_disable_unprepare(nandc->aon_clk);
clk_disable_unprepare(nandc->core_clk);
dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res),
DMA_BIDIRECTIONAL, 0);
}
static const struct qcom_nandc_props ipq806x_nandc_props = {
.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
.is_bam = false,
.use_codeword_fixup = true,
.dev_cmd_reg_start = 0x0,
};
static const struct qcom_nandc_props ipq4019_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
.is_bam = true,
.is_qpic = true,
.dev_cmd_reg_start = 0x0,
};
static const struct qcom_nandc_props ipq8074_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
.is_bam = true,
.is_qpic = true,
.dev_cmd_reg_start = 0x7000,
};
static const struct qcom_nandc_props sdx55_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
.is_bam = true,
.is_qpic = true,
.qpic_v2 = true,
.dev_cmd_reg_start = 0x7000,
};
/*
* data will hold a struct pointer containing more differences once we support
* more controller variants
*/
static const struct of_device_id qcom_nandc_of_match[] = {
{
.compatible = "qcom,ipq806x-nand",
.data = &ipq806x_nandc_props,
},
{
.compatible = "qcom,ipq4019-nand",
.data = &ipq4019_nandc_props,
},
{
.compatible = "qcom,ipq6018-nand",
.data = &ipq8074_nandc_props,
},
{
.compatible = "qcom,ipq8074-nand",
.data = &ipq8074_nandc_props,
},
{
.compatible = "qcom,sdx55-nand",
.data = &sdx55_nandc_props,
},
{}
};
MODULE_DEVICE_TABLE(of, qcom_nandc_of_match);
static struct platform_driver qcom_nandc_driver = {
.driver = {
.name = "qcom-nandc",
.of_match_table = qcom_nandc_of_match,
},
.probe = qcom_nandc_probe,
.remove_new = qcom_nandc_remove,
};
module_platform_driver(qcom_nandc_driver);
MODULE_AUTHOR("Archit Taneja <architt@codeaurora.org>");
MODULE_DESCRIPTION("Qualcomm NAND Controller driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink