403 lines
9.6 KiB
C
403 lines
9.6 KiB
C
/*
|
|
* B53 register access through MII registers
|
|
*
|
|
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/brcmphy.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <net/dsa.h>
|
|
|
|
#include "b53_priv.h"
|
|
|
|
/* MII registers */
|
|
#define REG_MII_PAGE 0x10 /* MII Page register */
|
|
#define REG_MII_ADDR 0x11 /* MII Address register */
|
|
#define REG_MII_DATA0 0x18 /* MII Data register 0 */
|
|
#define REG_MII_DATA1 0x19 /* MII Data register 1 */
|
|
#define REG_MII_DATA2 0x1a /* MII Data register 2 */
|
|
#define REG_MII_DATA3 0x1b /* MII Data register 3 */
|
|
|
|
#define REG_MII_PAGE_ENABLE BIT(0)
|
|
#define REG_MII_ADDR_WRITE BIT(0)
|
|
#define REG_MII_ADDR_READ BIT(1)
|
|
|
|
static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
|
|
{
|
|
int i;
|
|
u16 v;
|
|
int ret;
|
|
struct mii_bus *bus = dev->priv;
|
|
|
|
if (dev->current_page != page) {
|
|
/* set page number */
|
|
v = (page << 8) | REG_MII_PAGE_ENABLE;
|
|
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_PAGE, v);
|
|
if (ret)
|
|
return ret;
|
|
dev->current_page = page;
|
|
}
|
|
|
|
/* set register address */
|
|
v = (reg << 8) | op;
|
|
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* check if operation completed */
|
|
for (i = 0; i < 5; ++i) {
|
|
v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_ADDR);
|
|
if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
|
|
break;
|
|
usleep_range(10, 100);
|
|
}
|
|
|
|
if (WARN_ON(i == 5))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
int ret;
|
|
|
|
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
int ret;
|
|
|
|
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
int ret;
|
|
|
|
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
|
|
*val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA1) << 16;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
u64 temp = 0;
|
|
int i;
|
|
int ret;
|
|
|
|
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 2; i >= 0; i--) {
|
|
temp <<= 16;
|
|
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0 + i);
|
|
}
|
|
|
|
*val = temp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
u64 temp = 0;
|
|
int i;
|
|
int ret;
|
|
|
|
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 3; i >= 0; i--) {
|
|
temp <<= 16;
|
|
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0 + i);
|
|
}
|
|
|
|
*val = temp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
int ret;
|
|
|
|
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0, value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
|
|
u16 value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
int ret;
|
|
|
|
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0, value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
|
|
u32 value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
unsigned int i;
|
|
u32 temp = value;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0 + i,
|
|
temp & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
temp >>= 16;
|
|
}
|
|
|
|
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
|
|
u64 value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
unsigned int i;
|
|
u64 temp = value;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0 + i,
|
|
temp & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
temp >>= 16;
|
|
}
|
|
|
|
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
|
|
u64 value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
unsigned int i;
|
|
u64 temp = value;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
|
|
REG_MII_DATA0 + i,
|
|
temp & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
temp >>= 16;
|
|
}
|
|
|
|
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
|
|
}
|
|
|
|
static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
|
|
u16 *value)
|
|
{
|
|
struct mii_bus *bus = dev->priv;
|
|
|
|
*value = mdiobus_read_nested(bus, addr, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
|
|
u16 value)
|
|
{
|
|
struct mii_bus *bus = dev->bus;
|
|
|
|
return mdiobus_write_nested(bus, addr, reg, value);
|
|
}
|
|
|
|
static const struct b53_io_ops b53_mdio_ops = {
|
|
.read8 = b53_mdio_read8,
|
|
.read16 = b53_mdio_read16,
|
|
.read32 = b53_mdio_read32,
|
|
.read48 = b53_mdio_read48,
|
|
.read64 = b53_mdio_read64,
|
|
.write8 = b53_mdio_write8,
|
|
.write16 = b53_mdio_write16,
|
|
.write32 = b53_mdio_write32,
|
|
.write48 = b53_mdio_write48,
|
|
.write64 = b53_mdio_write64,
|
|
.phy_read16 = b53_mdio_phy_read16,
|
|
.phy_write16 = b53_mdio_phy_write16,
|
|
};
|
|
|
|
#define B53_BRCM_OUI_1 0x0143bc00
|
|
#define B53_BRCM_OUI_2 0x03625c00
|
|
#define B53_BRCM_OUI_3 0x00406000
|
|
#define B53_BRCM_OUI_4 0x01410c00
|
|
#define B53_BRCM_OUI_5 0xae025000
|
|
|
|
static int b53_mdio_probe(struct mdio_device *mdiodev)
|
|
{
|
|
struct b53_device *dev;
|
|
u32 phy_id;
|
|
int ret;
|
|
|
|
/* allow the generic PHY driver to take over the non-management MDIO
|
|
* addresses
|
|
*/
|
|
if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
|
|
dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
|
|
mdiodev->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* read the first port's id */
|
|
phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
|
|
phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
|
|
|
|
/* BCM5325, BCM539x (OUI_1)
|
|
* BCM53125, BCM53128 (OUI_2)
|
|
* BCM5365 (OUI_3)
|
|
*/
|
|
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
|
|
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
|
|
(phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
|
|
(phy_id & 0xfffffc00) != B53_BRCM_OUI_4 &&
|
|
(phy_id & 0xfffffc00) != B53_BRCM_OUI_5) {
|
|
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* First probe will come from SWITCH_MDIO controller on the 7445D0
|
|
* switch, which will conflict with the 7445 integrated switch
|
|
* pseudo-phy (we end-up programming both). In that case, we return
|
|
* -EPROBE_DEFER for the first time we get here, and wait until we come
|
|
* back with the slave MDIO bus which has the correct indirection
|
|
* layer setup
|
|
*/
|
|
if (of_machine_is_compatible("brcm,bcm7445d0") &&
|
|
strcmp(mdiodev->bus->name, "sf2 slave mii"))
|
|
return -EPROBE_DEFER;
|
|
|
|
dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
/* we don't use page 0xff, so force a page set */
|
|
dev->current_page = 0xff;
|
|
dev->bus = mdiodev->bus;
|
|
|
|
dev_set_drvdata(&mdiodev->dev, dev);
|
|
|
|
ret = b53_switch_register(dev);
|
|
if (ret) {
|
|
dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void b53_mdio_remove(struct mdio_device *mdiodev)
|
|
{
|
|
struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
|
|
|
|
if (!dev)
|
|
return;
|
|
|
|
b53_switch_remove(dev);
|
|
}
|
|
|
|
static void b53_mdio_shutdown(struct mdio_device *mdiodev)
|
|
{
|
|
struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
|
|
|
|
if (!dev)
|
|
return;
|
|
|
|
b53_switch_shutdown(dev);
|
|
|
|
dev_set_drvdata(&mdiodev->dev, NULL);
|
|
}
|
|
|
|
static const struct of_device_id b53_of_match[] = {
|
|
{ .compatible = "brcm,bcm5325" },
|
|
{ .compatible = "brcm,bcm53115" },
|
|
{ .compatible = "brcm,bcm53125" },
|
|
{ .compatible = "brcm,bcm53128" },
|
|
{ .compatible = "brcm,bcm53134" },
|
|
{ .compatible = "brcm,bcm5365" },
|
|
{ .compatible = "brcm,bcm5389" },
|
|
{ .compatible = "brcm,bcm5395" },
|
|
{ .compatible = "brcm,bcm5397" },
|
|
{ .compatible = "brcm,bcm5398" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, b53_of_match);
|
|
|
|
static struct mdio_driver b53_mdio_driver = {
|
|
.probe = b53_mdio_probe,
|
|
.remove = b53_mdio_remove,
|
|
.shutdown = b53_mdio_shutdown,
|
|
.mdiodrv.driver = {
|
|
.name = "bcm53xx",
|
|
.of_match_table = b53_of_match,
|
|
},
|
|
};
|
|
mdio_module_driver(b53_mdio_driver);
|
|
|
|
MODULE_DESCRIPTION("B53 MDIO access driver");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|