130 lines
3.9 KiB
C
130 lines
3.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*******************************************************************************
|
|
This is the driver for the MAC 10/100 on-chip Ethernet controller
|
|
currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
|
|
|
|
DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
|
|
this code.
|
|
|
|
This contains the functions to handle the dma.
|
|
|
|
Copyright (C) 2007-2009 STMicroelectronics Ltd
|
|
|
|
|
|
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*******************************************************************************/
|
|
|
|
#include <asm/io.h>
|
|
#include "dwmac100.h"
|
|
#include "dwmac_dma.h"
|
|
|
|
static void dwmac100_dma_init(void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg, int atds)
|
|
{
|
|
/* Enable Application Access by writing to DMA CSR0 */
|
|
writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
|
|
ioaddr + DMA_BUS_MODE);
|
|
|
|
/* Mask interrupts by writing to CSR7 */
|
|
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
|
|
}
|
|
|
|
static void dwmac100_dma_init_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg,
|
|
dma_addr_t dma_rx_phy, u32 chan)
|
|
{
|
|
/* RX descriptor base addr lists must be written into DMA CSR3 */
|
|
writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
|
|
}
|
|
|
|
static void dwmac100_dma_init_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg,
|
|
dma_addr_t dma_tx_phy, u32 chan)
|
|
{
|
|
/* TX descriptor base addr lists must be written into DMA CSR4 */
|
|
writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
|
|
}
|
|
|
|
/* Store and Forward capability is not used at all.
|
|
*
|
|
* The transmit threshold can be programmed by setting the TTC bits in the DMA
|
|
* control register.
|
|
*/
|
|
static void dwmac100_dma_operation_mode_tx(struct stmmac_priv *priv,
|
|
void __iomem *ioaddr, int mode,
|
|
u32 channel, int fifosz, u8 qmode)
|
|
{
|
|
u32 csr6 = readl(ioaddr + DMA_CONTROL);
|
|
|
|
if (mode <= 32)
|
|
csr6 |= DMA_CONTROL_TTC_32;
|
|
else if (mode <= 64)
|
|
csr6 |= DMA_CONTROL_TTC_64;
|
|
else
|
|
csr6 |= DMA_CONTROL_TTC_128;
|
|
|
|
writel(csr6, ioaddr + DMA_CONTROL);
|
|
}
|
|
|
|
static void dwmac100_dump_dma_regs(struct stmmac_priv *priv,
|
|
void __iomem *ioaddr, u32 *reg_space)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_DWMAC100_DMA_REGS; i++)
|
|
reg_space[DMA_BUS_MODE / 4 + i] =
|
|
readl(ioaddr + DMA_BUS_MODE + i * 4);
|
|
|
|
reg_space[DMA_CUR_TX_BUF_ADDR / 4] =
|
|
readl(ioaddr + DMA_CUR_TX_BUF_ADDR);
|
|
reg_space[DMA_CUR_RX_BUF_ADDR / 4] =
|
|
readl(ioaddr + DMA_CUR_RX_BUF_ADDR);
|
|
}
|
|
|
|
/* DMA controller has two counters to track the number of the missed frames. */
|
|
static void dwmac100_dma_diagnostic_fr(struct net_device_stats *stats,
|
|
struct stmmac_extra_stats *x,
|
|
void __iomem *ioaddr)
|
|
{
|
|
u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
|
|
|
|
if (unlikely(csr8)) {
|
|
if (csr8 & DMA_MISSED_FRAME_OVE) {
|
|
stats->rx_over_errors += 0x800;
|
|
x->rx_overflow_cntr += 0x800;
|
|
} else {
|
|
unsigned int ove_cntr;
|
|
ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
|
|
stats->rx_over_errors += ove_cntr;
|
|
x->rx_overflow_cntr += ove_cntr;
|
|
}
|
|
|
|
if (csr8 & DMA_MISSED_FRAME_OVE_M) {
|
|
stats->rx_missed_errors += 0xffff;
|
|
x->rx_missed_cntr += 0xffff;
|
|
} else {
|
|
unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
|
|
stats->rx_missed_errors += miss_f;
|
|
x->rx_missed_cntr += miss_f;
|
|
}
|
|
}
|
|
}
|
|
|
|
const struct stmmac_dma_ops dwmac100_dma_ops = {
|
|
.reset = dwmac_dma_reset,
|
|
.init = dwmac100_dma_init,
|
|
.init_rx_chan = dwmac100_dma_init_rx,
|
|
.init_tx_chan = dwmac100_dma_init_tx,
|
|
.dump_regs = dwmac100_dump_dma_regs,
|
|
.dma_tx_mode = dwmac100_dma_operation_mode_tx,
|
|
.dma_diagnostic_fr = dwmac100_dma_diagnostic_fr,
|
|
.enable_dma_transmission = dwmac_enable_dma_transmission,
|
|
.enable_dma_irq = dwmac_enable_dma_irq,
|
|
.disable_dma_irq = dwmac_disable_dma_irq,
|
|
.start_tx = dwmac_dma_start_tx,
|
|
.stop_tx = dwmac_dma_stop_tx,
|
|
.start_rx = dwmac_dma_start_rx,
|
|
.stop_rx = dwmac_dma_stop_rx,
|
|
.dma_interrupt = dwmac_dma_interrupt,
|
|
};
|