2194 lines
59 KiB
C
2194 lines
59 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* drivers/net/phy/at803x.c
|
|
*
|
|
* Driver for Qualcomm Atheros AR803x PHY
|
|
*
|
|
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool_netlink.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phylink.h>
|
|
#include <linux/sfp.h>
|
|
#include <dt-bindings/net/qca-ar803x.h>
|
|
|
|
#define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10
|
|
#define AT803X_SFC_ASSERT_CRS BIT(11)
|
|
#define AT803X_SFC_FORCE_LINK BIT(10)
|
|
#define AT803X_SFC_MDI_CROSSOVER_MODE_M GENMASK(6, 5)
|
|
#define AT803X_SFC_AUTOMATIC_CROSSOVER 0x3
|
|
#define AT803X_SFC_MANUAL_MDIX 0x1
|
|
#define AT803X_SFC_MANUAL_MDI 0x0
|
|
#define AT803X_SFC_SQE_TEST BIT(2)
|
|
#define AT803X_SFC_POLARITY_REVERSAL BIT(1)
|
|
#define AT803X_SFC_DISABLE_JABBER BIT(0)
|
|
|
|
#define AT803X_SPECIFIC_STATUS 0x11
|
|
#define AT803X_SS_SPEED_MASK GENMASK(15, 14)
|
|
#define AT803X_SS_SPEED_1000 2
|
|
#define AT803X_SS_SPEED_100 1
|
|
#define AT803X_SS_SPEED_10 0
|
|
#define AT803X_SS_DUPLEX BIT(13)
|
|
#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11)
|
|
#define AT803X_SS_MDIX BIT(6)
|
|
|
|
#define QCA808X_SS_SPEED_MASK GENMASK(9, 7)
|
|
#define QCA808X_SS_SPEED_2500 4
|
|
|
|
#define AT803X_INTR_ENABLE 0x12
|
|
#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
|
|
#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
|
|
#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13)
|
|
#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12)
|
|
#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11)
|
|
#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10)
|
|
#define AT803X_INTR_ENABLE_LINK_FAIL_BX BIT(8)
|
|
#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX BIT(7)
|
|
#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5)
|
|
#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1)
|
|
#define AT803X_INTR_ENABLE_WOL BIT(0)
|
|
|
|
#define AT803X_INTR_STATUS 0x13
|
|
|
|
#define AT803X_SMART_SPEED 0x14
|
|
#define AT803X_SMART_SPEED_ENABLE BIT(5)
|
|
#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2)
|
|
#define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1)
|
|
#define AT803X_CDT 0x16
|
|
#define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8)
|
|
#define AT803X_CDT_ENABLE_TEST BIT(0)
|
|
#define AT803X_CDT_STATUS 0x1c
|
|
#define AT803X_CDT_STATUS_STAT_NORMAL 0
|
|
#define AT803X_CDT_STATUS_STAT_SHORT 1
|
|
#define AT803X_CDT_STATUS_STAT_OPEN 2
|
|
#define AT803X_CDT_STATUS_STAT_FAIL 3
|
|
#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8)
|
|
#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0)
|
|
#define AT803X_LED_CONTROL 0x18
|
|
|
|
#define AT803X_PHY_MMD3_WOL_CTRL 0x8012
|
|
#define AT803X_WOL_EN BIT(5)
|
|
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
|
|
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
|
|
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
|
|
#define AT803X_REG_CHIP_CONFIG 0x1f
|
|
#define AT803X_BT_BX_REG_SEL 0x8000
|
|
|
|
#define AT803X_DEBUG_ADDR 0x1D
|
|
#define AT803X_DEBUG_DATA 0x1E
|
|
|
|
#define AT803X_MODE_CFG_MASK 0x0F
|
|
#define AT803X_MODE_CFG_BASET_RGMII 0x00
|
|
#define AT803X_MODE_CFG_BASET_SGMII 0x01
|
|
#define AT803X_MODE_CFG_BX1000_RGMII_50OHM 0x02
|
|
#define AT803X_MODE_CFG_BX1000_RGMII_75OHM 0x03
|
|
#define AT803X_MODE_CFG_BX1000_CONV_50OHM 0x04
|
|
#define AT803X_MODE_CFG_BX1000_CONV_75OHM 0x05
|
|
#define AT803X_MODE_CFG_FX100_RGMII_50OHM 0x06
|
|
#define AT803X_MODE_CFG_FX100_CONV_50OHM 0x07
|
|
#define AT803X_MODE_CFG_RGMII_AUTO_MDET 0x0B
|
|
#define AT803X_MODE_CFG_FX100_RGMII_75OHM 0x0E
|
|
#define AT803X_MODE_CFG_FX100_CONV_75OHM 0x0F
|
|
|
|
#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
|
|
#define AT803X_PSSR_MR_AN_COMPLETE 0x0200
|
|
|
|
#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00
|
|
#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2)
|
|
#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2)
|
|
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
|
|
|
|
#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05
|
|
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
|
|
|
|
#define AT803X_DEBUG_REG_HIB_CTRL 0x0b
|
|
#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10)
|
|
#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13)
|
|
#define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15)
|
|
|
|
#define AT803X_DEBUG_REG_3C 0x3C
|
|
|
|
#define AT803X_DEBUG_REG_GREEN 0x3D
|
|
#define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6)
|
|
|
|
#define AT803X_DEBUG_REG_1F 0x1F
|
|
#define AT803X_DEBUG_PLL_ON BIT(2)
|
|
#define AT803X_DEBUG_RGMII_1V8 BIT(3)
|
|
|
|
#define MDIO_AZ_DEBUG 0x800D
|
|
|
|
/* AT803x supports either the XTAL input pad, an internal PLL or the
|
|
* DSP as clock reference for the clock output pad. The XTAL reference
|
|
* is only used for 25 MHz output, all other frequencies need the PLL.
|
|
* The DSP as a clock reference is used in synchronous ethernet
|
|
* applications.
|
|
*
|
|
* By default the PLL is only enabled if there is a link. Otherwise
|
|
* the PHY will go into low power state and disabled the PLL. You can
|
|
* set the PLL_ON bit (see debug register 0x1f) to keep the PLL always
|
|
* enabled.
|
|
*/
|
|
#define AT803X_MMD7_CLK25M 0x8016
|
|
#define AT803X_CLK_OUT_MASK GENMASK(4, 2)
|
|
#define AT803X_CLK_OUT_25MHZ_XTAL 0
|
|
#define AT803X_CLK_OUT_25MHZ_DSP 1
|
|
#define AT803X_CLK_OUT_50MHZ_PLL 2
|
|
#define AT803X_CLK_OUT_50MHZ_DSP 3
|
|
#define AT803X_CLK_OUT_62_5MHZ_PLL 4
|
|
#define AT803X_CLK_OUT_62_5MHZ_DSP 5
|
|
#define AT803X_CLK_OUT_125MHZ_PLL 6
|
|
#define AT803X_CLK_OUT_125MHZ_DSP 7
|
|
|
|
/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask
|
|
* but doesn't support choosing between XTAL/PLL and DSP.
|
|
*/
|
|
#define AT8035_CLK_OUT_MASK GENMASK(4, 3)
|
|
|
|
#define AT803X_CLK_OUT_STRENGTH_MASK GENMASK(8, 7)
|
|
#define AT803X_CLK_OUT_STRENGTH_FULL 0
|
|
#define AT803X_CLK_OUT_STRENGTH_HALF 1
|
|
#define AT803X_CLK_OUT_STRENGTH_QUARTER 2
|
|
|
|
#define AT803X_DEFAULT_DOWNSHIFT 5
|
|
#define AT803X_MIN_DOWNSHIFT 2
|
|
#define AT803X_MAX_DOWNSHIFT 9
|
|
|
|
#define AT803X_MMD3_SMARTEEE_CTL1 0x805b
|
|
#define AT803X_MMD3_SMARTEEE_CTL2 0x805c
|
|
#define AT803X_MMD3_SMARTEEE_CTL3 0x805d
|
|
#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN BIT(8)
|
|
|
|
#define ATH9331_PHY_ID 0x004dd041
|
|
#define ATH8030_PHY_ID 0x004dd076
|
|
#define ATH8031_PHY_ID 0x004dd074
|
|
#define ATH8032_PHY_ID 0x004dd023
|
|
#define ATH8035_PHY_ID 0x004dd072
|
|
#define AT8030_PHY_ID_MASK 0xffffffef
|
|
|
|
#define QCA8081_PHY_ID 0x004dd101
|
|
|
|
#define QCA8327_A_PHY_ID 0x004dd033
|
|
#define QCA8327_B_PHY_ID 0x004dd034
|
|
#define QCA8337_PHY_ID 0x004dd036
|
|
#define QCA9561_PHY_ID 0x004dd042
|
|
#define QCA8K_PHY_ID_MASK 0xffffffff
|
|
|
|
#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0)
|
|
|
|
#define AT803X_PAGE_FIBER 0
|
|
#define AT803X_PAGE_COPPER 1
|
|
|
|
/* don't turn off internal PLL */
|
|
#define AT803X_KEEP_PLL_ENABLED BIT(0)
|
|
#define AT803X_DISABLE_SMARTEEE BIT(1)
|
|
|
|
/* disable hibernation mode */
|
|
#define AT803X_DISABLE_HIBERNATION_MODE BIT(2)
|
|
|
|
/* ADC threshold */
|
|
#define QCA808X_PHY_DEBUG_ADC_THRESHOLD 0x2c80
|
|
#define QCA808X_ADC_THRESHOLD_MASK GENMASK(7, 0)
|
|
#define QCA808X_ADC_THRESHOLD_80MV 0
|
|
#define QCA808X_ADC_THRESHOLD_100MV 0xf0
|
|
#define QCA808X_ADC_THRESHOLD_200MV 0x0f
|
|
#define QCA808X_ADC_THRESHOLD_300MV 0xff
|
|
|
|
/* CLD control */
|
|
#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7 0x8007
|
|
#define QCA808X_8023AZ_AFE_CTRL_MASK GENMASK(8, 4)
|
|
#define QCA808X_8023AZ_AFE_EN 0x90
|
|
|
|
/* AZ control */
|
|
#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL 0x8008
|
|
#define QCA808X_MMD3_AZ_TRAINING_VAL 0x1c32
|
|
|
|
#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB 0x8014
|
|
#define QCA808X_MSE_THRESHOLD_20DB_VALUE 0x529
|
|
|
|
#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB 0x800E
|
|
#define QCA808X_MSE_THRESHOLD_17DB_VALUE 0x341
|
|
|
|
#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB 0x801E
|
|
#define QCA808X_MSE_THRESHOLD_27DB_VALUE 0x419
|
|
|
|
#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB 0x8020
|
|
#define QCA808X_MSE_THRESHOLD_28DB_VALUE 0x341
|
|
|
|
#define QCA808X_PHY_MMD7_TOP_OPTION1 0x901c
|
|
#define QCA808X_TOP_OPTION1_DATA 0x0
|
|
|
|
#define QCA808X_PHY_MMD3_DEBUG_1 0xa100
|
|
#define QCA808X_MMD3_DEBUG_1_VALUE 0x9203
|
|
#define QCA808X_PHY_MMD3_DEBUG_2 0xa101
|
|
#define QCA808X_MMD3_DEBUG_2_VALUE 0x48ad
|
|
#define QCA808X_PHY_MMD3_DEBUG_3 0xa103
|
|
#define QCA808X_MMD3_DEBUG_3_VALUE 0x1698
|
|
#define QCA808X_PHY_MMD3_DEBUG_4 0xa105
|
|
#define QCA808X_MMD3_DEBUG_4_VALUE 0x8001
|
|
#define QCA808X_PHY_MMD3_DEBUG_5 0xa106
|
|
#define QCA808X_MMD3_DEBUG_5_VALUE 0x1111
|
|
#define QCA808X_PHY_MMD3_DEBUG_6 0xa011
|
|
#define QCA808X_MMD3_DEBUG_6_VALUE 0x5f85
|
|
|
|
/* master/slave seed config */
|
|
#define QCA808X_PHY_DEBUG_LOCAL_SEED 9
|
|
#define QCA808X_MASTER_SLAVE_SEED_ENABLE BIT(1)
|
|
#define QCA808X_MASTER_SLAVE_SEED_CFG GENMASK(12, 2)
|
|
#define QCA808X_MASTER_SLAVE_SEED_RANGE 0x32
|
|
|
|
/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
|
|
* when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
|
|
*/
|
|
#define QCA808X_DBG_AN_TEST 0xb
|
|
#define QCA808X_HIBERNATION_EN BIT(15)
|
|
|
|
#define QCA808X_CDT_ENABLE_TEST BIT(15)
|
|
#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
|
|
#define QCA808X_CDT_LENGTH_UNIT BIT(10)
|
|
|
|
#define QCA808X_MMD3_CDT_STATUS 0x8064
|
|
#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065
|
|
#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
|
|
#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
|
|
#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
|
|
#define QCA808X_CDT_DIAG_LENGTH GENMASK(7, 0)
|
|
|
|
#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
|
|
#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
|
|
#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
|
|
#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
|
|
#define QCA808X_CDT_STATUS_STAT_FAIL 0
|
|
#define QCA808X_CDT_STATUS_STAT_NORMAL 1
|
|
#define QCA808X_CDT_STATUS_STAT_OPEN 2
|
|
#define QCA808X_CDT_STATUS_STAT_SHORT 3
|
|
|
|
MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
|
|
MODULE_AUTHOR("Matus Ujhelyi");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
enum stat_access_type {
|
|
PHY,
|
|
MMD
|
|
};
|
|
|
|
struct at803x_hw_stat {
|
|
const char *string;
|
|
u8 reg;
|
|
u32 mask;
|
|
enum stat_access_type access_type;
|
|
};
|
|
|
|
static struct at803x_hw_stat at803x_hw_stats[] = {
|
|
{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
|
|
{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
|
|
{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
|
|
};
|
|
|
|
struct at803x_priv {
|
|
int flags;
|
|
u16 clk_25m_reg;
|
|
u16 clk_25m_mask;
|
|
u8 smarteee_lpi_tw_1g;
|
|
u8 smarteee_lpi_tw_100m;
|
|
bool is_fiber;
|
|
bool is_1000basex;
|
|
struct regulator_dev *vddio_rdev;
|
|
struct regulator_dev *vddh_rdev;
|
|
u64 stats[ARRAY_SIZE(at803x_hw_stats)];
|
|
};
|
|
|
|
struct at803x_context {
|
|
u16 bmcr;
|
|
u16 advertise;
|
|
u16 control1000;
|
|
u16 int_enable;
|
|
u16 smart_speed;
|
|
u16 led_control;
|
|
};
|
|
|
|
static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return phy_write(phydev, AT803X_DEBUG_DATA, data);
|
|
}
|
|
|
|
static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return phy_read(phydev, AT803X_DEBUG_DATA);
|
|
}
|
|
|
|
static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
|
|
u16 clear, u16 set)
|
|
{
|
|
u16 val;
|
|
int ret;
|
|
|
|
ret = at803x_debug_reg_read(phydev, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = ret & 0xffff;
|
|
val &= ~clear;
|
|
val |= set;
|
|
|
|
return phy_write(phydev, AT803X_DEBUG_DATA, val);
|
|
}
|
|
|
|
static int at803x_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
int mask;
|
|
int set;
|
|
|
|
if (page == AT803X_PAGE_COPPER) {
|
|
set = AT803X_BT_BX_REG_SEL;
|
|
mask = 0;
|
|
} else {
|
|
set = 0;
|
|
mask = AT803X_BT_BX_REG_SEL;
|
|
}
|
|
|
|
return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
|
|
}
|
|
|
|
static int at803x_read_page(struct phy_device *phydev)
|
|
{
|
|
int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
|
|
|
|
if (ccr < 0)
|
|
return ccr;
|
|
|
|
if (ccr & AT803X_BT_BX_REG_SEL)
|
|
return AT803X_PAGE_COPPER;
|
|
|
|
return AT803X_PAGE_FIBER;
|
|
}
|
|
|
|
static int at803x_enable_rx_delay(struct phy_device *phydev)
|
|
{
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
|
|
AT803X_DEBUG_RX_CLK_DLY_EN);
|
|
}
|
|
|
|
static int at803x_enable_tx_delay(struct phy_device *phydev)
|
|
{
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
|
|
AT803X_DEBUG_TX_CLK_DLY_EN);
|
|
}
|
|
|
|
static int at803x_disable_rx_delay(struct phy_device *phydev)
|
|
{
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
|
|
AT803X_DEBUG_RX_CLK_DLY_EN, 0);
|
|
}
|
|
|
|
static int at803x_disable_tx_delay(struct phy_device *phydev)
|
|
{
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
|
|
AT803X_DEBUG_TX_CLK_DLY_EN, 0);
|
|
}
|
|
|
|
/* save relevant PHY registers to private copy */
|
|
static void at803x_context_save(struct phy_device *phydev,
|
|
struct at803x_context *context)
|
|
{
|
|
context->bmcr = phy_read(phydev, MII_BMCR);
|
|
context->advertise = phy_read(phydev, MII_ADVERTISE);
|
|
context->control1000 = phy_read(phydev, MII_CTRL1000);
|
|
context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
|
|
context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
|
|
}
|
|
|
|
/* restore relevant PHY registers from private copy */
|
|
static void at803x_context_restore(struct phy_device *phydev,
|
|
const struct at803x_context *context)
|
|
{
|
|
phy_write(phydev, MII_BMCR, context->bmcr);
|
|
phy_write(phydev, MII_ADVERTISE, context->advertise);
|
|
phy_write(phydev, MII_CTRL1000, context->control1000);
|
|
phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
|
|
phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
|
|
phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
|
|
}
|
|
|
|
static int at803x_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int ret, irq_enabled;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
const u8 *mac;
|
|
unsigned int i;
|
|
static const unsigned int offsets[] = {
|
|
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
|
|
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
|
|
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
|
|
};
|
|
|
|
if (!ndev)
|
|
return -ENODEV;
|
|
|
|
mac = (const u8 *) ndev->dev_addr;
|
|
|
|
if (!is_valid_ether_addr(mac))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
|
|
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
|
|
|
|
/* Enable WOL function for 1588 */
|
|
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
|
|
AT803X_PHY_MMD3_WOL_CTRL,
|
|
0, AT803X_WOL_EN);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
/* Enable WOL interrupt */
|
|
ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
/* Disable WoL function for 1588 */
|
|
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
|
|
AT803X_PHY_MMD3_WOL_CTRL,
|
|
AT803X_WOL_EN, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
/* Disable WOL interrupt */
|
|
ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Clear WOL status */
|
|
ret = phy_read(phydev, AT803X_INTR_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Check if there are other interrupts except for WOL triggered when PHY is
|
|
* in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
|
|
* be passed up to the interrupt PIN.
|
|
*/
|
|
irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
if (irq_enabled < 0)
|
|
return irq_enabled;
|
|
|
|
irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
|
|
if (ret & irq_enabled && !phy_polling_mode(phydev))
|
|
phy_trigger_machine(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at803x_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int value;
|
|
|
|
wol->supported = WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
if (value < 0)
|
|
return;
|
|
|
|
if (value & AT803X_INTR_ENABLE_WOL)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
}
|
|
|
|
static int at803x_get_sset_count(struct phy_device *phydev)
|
|
{
|
|
return ARRAY_SIZE(at803x_hw_stats);
|
|
}
|
|
|
|
static void at803x_get_strings(struct phy_device *phydev, u8 *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) {
|
|
strscpy(data + i * ETH_GSTRING_LEN,
|
|
at803x_hw_stats[i].string, ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
static u64 at803x_get_stat(struct phy_device *phydev, int i)
|
|
{
|
|
struct at803x_hw_stat stat = at803x_hw_stats[i];
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int val;
|
|
u64 ret;
|
|
|
|
if (stat.access_type == MMD)
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
|
|
else
|
|
val = phy_read(phydev, stat.reg);
|
|
|
|
if (val < 0) {
|
|
ret = U64_MAX;
|
|
} else {
|
|
val = val & stat.mask;
|
|
priv->stats[i] += val;
|
|
ret = priv->stats[i];
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void at803x_get_stats(struct phy_device *phydev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++)
|
|
data[i] = at803x_get_stat(phydev, i);
|
|
}
|
|
|
|
static int at803x_suspend(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
int wol_enabled;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
wol_enabled = value & AT803X_INTR_ENABLE_WOL;
|
|
|
|
if (wol_enabled)
|
|
value = BMCR_ISOLATE;
|
|
else
|
|
value = BMCR_PDOWN;
|
|
|
|
phy_modify(phydev, MII_BMCR, 0, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_resume(struct phy_device *phydev)
|
|
{
|
|
return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
|
|
}
|
|
|
|
static int at803x_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct phy_device *phydev = rdev_get_drvdata(rdev);
|
|
|
|
if (selector)
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
|
|
0, AT803X_DEBUG_RGMII_1V8);
|
|
else
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
|
|
AT803X_DEBUG_RGMII_1V8, 0);
|
|
}
|
|
|
|
static int at803x_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct phy_device *phydev = rdev_get_drvdata(rdev);
|
|
int val;
|
|
|
|
val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
|
|
}
|
|
|
|
static const struct regulator_ops vddio_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.set_voltage_sel = at803x_rgmii_reg_set_voltage_sel,
|
|
.get_voltage_sel = at803x_rgmii_reg_get_voltage_sel,
|
|
};
|
|
|
|
static const unsigned int vddio_voltage_table[] = {
|
|
1500000,
|
|
1800000,
|
|
};
|
|
|
|
static const struct regulator_desc vddio_desc = {
|
|
.name = "vddio",
|
|
.of_match = of_match_ptr("vddio-regulator"),
|
|
.n_voltages = ARRAY_SIZE(vddio_voltage_table),
|
|
.volt_table = vddio_voltage_table,
|
|
.ops = &vddio_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct regulator_ops vddh_regulator_ops = {
|
|
};
|
|
|
|
static const struct regulator_desc vddh_desc = {
|
|
.name = "vddh",
|
|
.of_match = of_match_ptr("vddh-regulator"),
|
|
.n_voltages = 1,
|
|
.fixed_uV = 2500000,
|
|
.ops = &vddh_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int at8031_register_regulators(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct regulator_config config = { };
|
|
|
|
config.dev = dev;
|
|
config.driver_data = phydev;
|
|
|
|
priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
|
|
if (IS_ERR(priv->vddio_rdev)) {
|
|
phydev_err(phydev, "failed to register VDDIO regulator\n");
|
|
return PTR_ERR(priv->vddio_rdev);
|
|
}
|
|
|
|
priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
|
|
if (IS_ERR(priv->vddh_rdev)) {
|
|
phydev_err(phydev, "failed to register VDDH regulator\n");
|
|
return PTR_ERR(priv->vddh_rdev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
|
|
{
|
|
struct phy_device *phydev = upstream;
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
|
|
DECLARE_PHY_INTERFACE_MASK(interfaces);
|
|
phy_interface_t iface;
|
|
|
|
linkmode_zero(phy_support);
|
|
phylink_set(phy_support, 1000baseX_Full);
|
|
phylink_set(phy_support, 1000baseT_Full);
|
|
phylink_set(phy_support, Autoneg);
|
|
phylink_set(phy_support, Pause);
|
|
phylink_set(phy_support, Asym_Pause);
|
|
|
|
linkmode_zero(sfp_support);
|
|
sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
|
|
/* Some modules support 10G modes as well as others we support.
|
|
* Mask out non-supported modes so the correct interface is picked.
|
|
*/
|
|
linkmode_and(sfp_support, phy_support, sfp_support);
|
|
|
|
if (linkmode_empty(sfp_support)) {
|
|
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
|
|
|
|
/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
|
|
* interface for use with SFP modules.
|
|
* However, some copper modules detected as having a preferred SGMII
|
|
* interface do default to and function in 1000Base-X mode, so just
|
|
* print a warning and allow such modules, as they may have some chance
|
|
* of working.
|
|
*/
|
|
if (iface == PHY_INTERFACE_MODE_SGMII)
|
|
dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
|
|
else if (iface != PHY_INTERFACE_MODE_1000BASEX)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sfp_upstream_ops at803x_sfp_ops = {
|
|
.attach = phy_sfp_attach,
|
|
.detach = phy_sfp_detach,
|
|
.module_insert = at803x_sfp_insert,
|
|
};
|
|
|
|
static int at803x_parse_dt(struct phy_device *phydev)
|
|
{
|
|
struct device_node *node = phydev->mdio.dev.of_node;
|
|
struct at803x_priv *priv = phydev->priv;
|
|
u32 freq, strength, tw;
|
|
unsigned int sel;
|
|
int ret;
|
|
|
|
if (!IS_ENABLED(CONFIG_OF_MDIO))
|
|
return 0;
|
|
|
|
if (of_property_read_bool(node, "qca,disable-smarteee"))
|
|
priv->flags |= AT803X_DISABLE_SMARTEEE;
|
|
|
|
if (of_property_read_bool(node, "qca,disable-hibernation-mode"))
|
|
priv->flags |= AT803X_DISABLE_HIBERNATION_MODE;
|
|
|
|
if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) {
|
|
if (!tw || tw > 255) {
|
|
phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n");
|
|
return -EINVAL;
|
|
}
|
|
priv->smarteee_lpi_tw_1g = tw;
|
|
}
|
|
|
|
if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) {
|
|
if (!tw || tw > 255) {
|
|
phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n");
|
|
return -EINVAL;
|
|
}
|
|
priv->smarteee_lpi_tw_100m = tw;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq);
|
|
if (!ret) {
|
|
switch (freq) {
|
|
case 25000000:
|
|
sel = AT803X_CLK_OUT_25MHZ_XTAL;
|
|
break;
|
|
case 50000000:
|
|
sel = AT803X_CLK_OUT_50MHZ_PLL;
|
|
break;
|
|
case 62500000:
|
|
sel = AT803X_CLK_OUT_62_5MHZ_PLL;
|
|
break;
|
|
case 125000000:
|
|
sel = AT803X_CLK_OUT_125MHZ_PLL;
|
|
break;
|
|
default:
|
|
phydev_err(phydev, "invalid qca,clk-out-frequency\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
|
|
priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
|
|
|
|
/* Fixup for the AR8030/AR8035. This chip has another mask and
|
|
* doesn't support the DSP reference. Eg. the lowest bit of the
|
|
* mask. The upper two bits select the same frequencies. Mask
|
|
* the lowest bit here.
|
|
*
|
|
* Warning:
|
|
* There was no datasheet for the AR8030 available so this is
|
|
* just a guess. But the AR8035 is listed as pin compatible
|
|
* to the AR8030 so there might be a good chance it works on
|
|
* the AR8030 too.
|
|
*/
|
|
if (phydev->drv->phy_id == ATH8030_PHY_ID ||
|
|
phydev->drv->phy_id == ATH8035_PHY_ID) {
|
|
priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
|
|
priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
|
|
}
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
|
|
if (!ret) {
|
|
priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK;
|
|
switch (strength) {
|
|
case AR803X_STRENGTH_FULL:
|
|
priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL;
|
|
break;
|
|
case AR803X_STRENGTH_HALF:
|
|
priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF;
|
|
break;
|
|
case AR803X_STRENGTH_QUARTER:
|
|
priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER;
|
|
break;
|
|
default:
|
|
phydev_err(phydev, "invalid qca,clk-out-strength\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
|
|
* options.
|
|
*/
|
|
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
|
|
if (of_property_read_bool(node, "qca,keep-pll-enabled"))
|
|
priv->flags |= AT803X_KEEP_PLL_ENABLED;
|
|
|
|
ret = at8031_register_regulators(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
|
|
"vddio");
|
|
if (ret) {
|
|
phydev_err(phydev, "failed to get VDDIO regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Only AR8031/8033 support 1000Base-X for SFP modules */
|
|
ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct at803x_priv *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
ret = at803x_parse_dt(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
|
|
int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
|
|
int mode_cfg;
|
|
|
|
if (ccr < 0)
|
|
return ccr;
|
|
mode_cfg = ccr & AT803X_MODE_CFG_MASK;
|
|
|
|
switch (mode_cfg) {
|
|
case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
|
|
case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
|
|
priv->is_1000basex = true;
|
|
fallthrough;
|
|
case AT803X_MODE_CFG_FX100_RGMII_50OHM:
|
|
case AT803X_MODE_CFG_FX100_RGMII_75OHM:
|
|
priv->is_fiber = true;
|
|
break;
|
|
}
|
|
|
|
/* Disable WoL in 1588 register which is enabled
|
|
* by default
|
|
*/
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
|
|
AT803X_PHY_MMD3_WOL_CTRL,
|
|
AT803X_WOL_EN, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_get_features(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int err;
|
|
|
|
err = genphy_read_abilities(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
if (phydev->drv->phy_id == QCA8081_PHY_ID) {
|
|
err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
|
|
err & MDIO_PMA_NG_EXTABLE_2_5GBT);
|
|
}
|
|
|
|
if (phydev->drv->phy_id != ATH8031_PHY_ID)
|
|
return 0;
|
|
|
|
/* AR8031/AR8033 have different status registers
|
|
* for copper and fiber operation. However, the
|
|
* extended status register is the same for both
|
|
* operation modes.
|
|
*
|
|
* As a result of that, ESTATUS_1000_XFULL is set
|
|
* to 1 even when operating in copper TP mode.
|
|
*
|
|
* Remove this mode from the supported link modes
|
|
* when not operating in 1000BaseX mode.
|
|
*/
|
|
if (!priv->is_1000basex)
|
|
linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
|
|
phydev->supported);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_smarteee_config(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
u16 mask = 0, val = 0;
|
|
int ret;
|
|
|
|
if (priv->flags & AT803X_DISABLE_SMARTEEE)
|
|
return phy_modify_mmd(phydev, MDIO_MMD_PCS,
|
|
AT803X_MMD3_SMARTEEE_CTL3,
|
|
AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0);
|
|
|
|
if (priv->smarteee_lpi_tw_1g) {
|
|
mask |= 0xff00;
|
|
val |= priv->smarteee_lpi_tw_1g << 8;
|
|
}
|
|
if (priv->smarteee_lpi_tw_100m) {
|
|
mask |= 0x00ff;
|
|
val |= priv->smarteee_lpi_tw_100m;
|
|
}
|
|
if (!mask)
|
|
return 0;
|
|
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1,
|
|
mask, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3,
|
|
AT803X_MMD3_SMARTEEE_CTL3_LPI_EN,
|
|
AT803X_MMD3_SMARTEEE_CTL3_LPI_EN);
|
|
}
|
|
|
|
static int at803x_clk_out_config(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
|
|
if (!priv->clk_25m_mask)
|
|
return 0;
|
|
|
|
return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M,
|
|
priv->clk_25m_mask, priv->clk_25m_reg);
|
|
}
|
|
|
|
static int at8031_pll_config(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
|
|
/* The default after hardware reset is PLL OFF. After a soft reset, the
|
|
* values are retained.
|
|
*/
|
|
if (priv->flags & AT803X_KEEP_PLL_ENABLED)
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
|
|
0, AT803X_DEBUG_PLL_ON);
|
|
else
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
|
|
AT803X_DEBUG_PLL_ON, 0);
|
|
}
|
|
|
|
static int at803x_hibernation_mode_config(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
|
|
/* The default after hardware reset is hibernation mode enabled. After
|
|
* software reset, the value is retained.
|
|
*/
|
|
if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE))
|
|
return 0;
|
|
|
|
return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
|
|
AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0);
|
|
}
|
|
|
|
static int at803x_config_init(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int ret;
|
|
|
|
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
|
|
/* Some bootloaders leave the fiber page selected.
|
|
* Switch to the appropriate page (fiber or copper), as otherwise we
|
|
* read the PHY capabilities from the wrong page.
|
|
*/
|
|
phy_lock_mdio_bus(phydev);
|
|
ret = at803x_write_page(phydev,
|
|
priv->is_fiber ? AT803X_PAGE_FIBER :
|
|
AT803X_PAGE_COPPER);
|
|
phy_unlock_mdio_bus(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = at8031_pll_config(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* The RX and TX delay default is:
|
|
* after HW reset: RX delay enabled and TX delay disabled
|
|
* after SW reset: RX delay enabled, while TX delay retains the
|
|
* value before reset.
|
|
*/
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
ret = at803x_enable_rx_delay(phydev);
|
|
else
|
|
ret = at803x_disable_rx_delay(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
ret = at803x_enable_tx_delay(phydev);
|
|
else
|
|
ret = at803x_disable_tx_delay(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = at803x_smarteee_config(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = at803x_clk_out_config(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = at803x_hibernation_mode_config(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Ar803x extended next page bit is enabled by default. Cisco
|
|
* multigig switches read this bit and attempt to negotiate 10Gbps
|
|
* rates even if the next page bit is disabled. This is incorrect
|
|
* behaviour but we still need to accommodate it. XNP is only needed
|
|
* for 10Gbps support, so disable XNP.
|
|
*/
|
|
return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
|
|
}
|
|
|
|
static int at803x_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, AT803X_INTR_STATUS);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int at803x_config_intr(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int err;
|
|
int value;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
/* Clear any pending interrupts */
|
|
err = at803x_ack_interrupt(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
|
|
value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
|
|
value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
|
|
value |= AT803X_INTR_ENABLE_LINK_FAIL;
|
|
value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
|
|
if (priv->is_fiber) {
|
|
value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
|
|
value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
|
|
}
|
|
|
|
err = phy_write(phydev, AT803X_INTR_ENABLE, value);
|
|
} else {
|
|
err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Clear any pending interrupts */
|
|
err = at803x_ack_interrupt(phydev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
|
|
{
|
|
int irq_status, int_enabled;
|
|
|
|
irq_status = phy_read(phydev, AT803X_INTR_STATUS);
|
|
if (irq_status < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Read the current enabled interrupts */
|
|
int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
if (int_enabled < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* See if this was one of our enabled interrupts */
|
|
if (!(irq_status & int_enabled))
|
|
return IRQ_NONE;
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void at803x_link_change_notify(struct phy_device *phydev)
|
|
{
|
|
/*
|
|
* Conduct a hardware reset for AT8030 every time a link loss is
|
|
* signalled. This is necessary to circumvent a hardware bug that
|
|
* occurs when the cable is unplugged while TX packets are pending
|
|
* in the FIFO. In such cases, the FIFO enters an error mode it
|
|
* cannot recover from by software.
|
|
*/
|
|
if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) {
|
|
struct at803x_context context;
|
|
|
|
at803x_context_save(phydev, &context);
|
|
|
|
phy_device_reset(phydev, 1);
|
|
msleep(1);
|
|
phy_device_reset(phydev, 0);
|
|
msleep(1);
|
|
|
|
at803x_context_restore(phydev, &context);
|
|
|
|
phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
|
|
}
|
|
}
|
|
|
|
static int at803x_read_specific_status(struct phy_device *phydev)
|
|
{
|
|
int ss;
|
|
|
|
/* Read the AT8035 PHY-Specific Status register, which indicates the
|
|
* speed and duplex that the PHY is actually using, irrespective of
|
|
* whether we are in autoneg mode or not.
|
|
*/
|
|
ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
|
|
if (ss < 0)
|
|
return ss;
|
|
|
|
if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
|
|
int sfc, speed;
|
|
|
|
sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
|
|
if (sfc < 0)
|
|
return sfc;
|
|
|
|
/* qca8081 takes the different bits for speed value from at803x */
|
|
if (phydev->drv->phy_id == QCA8081_PHY_ID)
|
|
speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss);
|
|
else
|
|
speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
|
|
|
|
switch (speed) {
|
|
case AT803X_SS_SPEED_10:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
case AT803X_SS_SPEED_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
case AT803X_SS_SPEED_1000:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case QCA808X_SS_SPEED_2500:
|
|
phydev->speed = SPEED_2500;
|
|
break;
|
|
}
|
|
if (ss & AT803X_SS_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
if (ss & AT803X_SS_MDIX)
|
|
phydev->mdix = ETH_TP_MDI_X;
|
|
else
|
|
phydev->mdix = ETH_TP_MDI;
|
|
|
|
switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
|
|
case AT803X_SFC_MANUAL_MDI:
|
|
phydev->mdix_ctrl = ETH_TP_MDI;
|
|
break;
|
|
case AT803X_SFC_MANUAL_MDIX:
|
|
phydev->mdix_ctrl = ETH_TP_MDI_X;
|
|
break;
|
|
case AT803X_SFC_AUTOMATIC_CROSSOVER:
|
|
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_read_status(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int err, old_link = phydev->link;
|
|
|
|
if (priv->is_1000basex)
|
|
return genphy_c37_read_status(phydev);
|
|
|
|
/* Update the link, but return if there was an error */
|
|
err = genphy_update_link(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* why bother the PHY if nothing can have changed */
|
|
if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
|
|
return 0;
|
|
|
|
phydev->speed = SPEED_UNKNOWN;
|
|
phydev->duplex = DUPLEX_UNKNOWN;
|
|
phydev->pause = 0;
|
|
phydev->asym_pause = 0;
|
|
|
|
err = genphy_read_lpa(phydev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = at803x_read_specific_status(phydev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
|
|
phy_resolve_aneg_pause(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
|
|
{
|
|
u16 val;
|
|
|
|
switch (ctrl) {
|
|
case ETH_TP_MDI:
|
|
val = AT803X_SFC_MANUAL_MDI;
|
|
break;
|
|
case ETH_TP_MDI_X:
|
|
val = AT803X_SFC_MANUAL_MDIX;
|
|
break;
|
|
case ETH_TP_MDI_AUTO:
|
|
val = AT803X_SFC_AUTOMATIC_CROSSOVER;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
|
|
AT803X_SFC_MDI_CROSSOVER_MODE_M,
|
|
FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
|
|
}
|
|
|
|
static int at803x_config_aneg(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
int ret;
|
|
|
|
ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Changes of the midx bits are disruptive to the normal operation;
|
|
* therefore any changes to these registers must be followed by a
|
|
* software reset to take effect.
|
|
*/
|
|
if (ret == 1) {
|
|
ret = genphy_soft_reset(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (priv->is_1000basex)
|
|
return genphy_c37_config_aneg(phydev);
|
|
|
|
/* Do not restart auto-negotiation by setting ret to 0 defautly,
|
|
* when calling __genphy_config_aneg later.
|
|
*/
|
|
ret = 0;
|
|
|
|
if (phydev->drv->phy_id == QCA8081_PHY_ID) {
|
|
int phy_ctrl = 0;
|
|
|
|
/* The reg MII_BMCR also needs to be configured for force mode, the
|
|
* genphy_config_aneg is also needed.
|
|
*/
|
|
if (phydev->autoneg == AUTONEG_DISABLE)
|
|
genphy_c45_pma_setup_forced(phydev);
|
|
|
|
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
|
|
phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
|
|
|
|
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
|
|
MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return __genphy_config_aneg(phydev, ret);
|
|
}
|
|
|
|
static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read(phydev, AT803X_SMART_SPEED);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & AT803X_SMART_SPEED_ENABLE)
|
|
*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
|
|
else
|
|
*d = DOWNSHIFT_DEV_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
|
|
{
|
|
u16 mask, set;
|
|
int ret;
|
|
|
|
switch (cnt) {
|
|
case DOWNSHIFT_DEV_DEFAULT_COUNT:
|
|
cnt = AT803X_DEFAULT_DOWNSHIFT;
|
|
fallthrough;
|
|
case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
|
|
set = AT803X_SMART_SPEED_ENABLE |
|
|
AT803X_SMART_SPEED_BYPASS_TIMER |
|
|
FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
|
|
mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
|
|
break;
|
|
case DOWNSHIFT_DEV_DISABLE:
|
|
set = 0;
|
|
mask = AT803X_SMART_SPEED_ENABLE |
|
|
AT803X_SMART_SPEED_BYPASS_TIMER;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
|
|
|
|
/* After changing the smart speed settings, we need to perform a
|
|
* software reset, use phy_init_hw() to make sure we set the
|
|
* reapply any values which might got lost during software reset.
|
|
*/
|
|
if (ret == 1)
|
|
ret = phy_init_hw(phydev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int at803x_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return at803x_get_downshift(phydev, data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int at803x_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, const void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return at803x_set_downshift(phydev, *(const u8 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int at803x_cable_test_result_trans(u16 status)
|
|
{
|
|
switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
|
|
case AT803X_CDT_STATUS_STAT_NORMAL:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OK;
|
|
case AT803X_CDT_STATUS_STAT_SHORT:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
|
|
case AT803X_CDT_STATUS_STAT_OPEN:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
|
|
case AT803X_CDT_STATUS_STAT_FAIL:
|
|
default:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
|
|
}
|
|
}
|
|
|
|
static bool at803x_cdt_test_failed(u16 status)
|
|
{
|
|
return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) ==
|
|
AT803X_CDT_STATUS_STAT_FAIL;
|
|
}
|
|
|
|
static bool at803x_cdt_fault_length_valid(u16 status)
|
|
{
|
|
switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
|
|
case AT803X_CDT_STATUS_STAT_OPEN:
|
|
case AT803X_CDT_STATUS_STAT_SHORT:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int at803x_cdt_fault_length(u16 status)
|
|
{
|
|
int dt;
|
|
|
|
/* According to the datasheet the distance to the fault is
|
|
* DELTA_TIME * 0.824 meters.
|
|
*
|
|
* The author suspect the correct formula is:
|
|
*
|
|
* fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
|
|
*
|
|
* where c is the speed of light, VF is the velocity factor of
|
|
* the twisted pair cable, 125MHz the counter frequency and
|
|
* we need to divide by 2 because the hardware will measure the
|
|
* round trip time to the fault and back to the PHY.
|
|
*
|
|
* With a VF of 0.69 we get the factor 0.824 mentioned in the
|
|
* datasheet.
|
|
*/
|
|
dt = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, status);
|
|
|
|
return (dt * 824) / 10;
|
|
}
|
|
|
|
static int at803x_cdt_start(struct phy_device *phydev, int pair)
|
|
{
|
|
u16 cdt;
|
|
|
|
/* qca8081 takes the different bit 15 to enable CDT test */
|
|
if (phydev->drv->phy_id == QCA8081_PHY_ID)
|
|
cdt = QCA808X_CDT_ENABLE_TEST |
|
|
QCA808X_CDT_LENGTH_UNIT |
|
|
QCA808X_CDT_INTER_CHECK_DIS;
|
|
else
|
|
cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
|
|
AT803X_CDT_ENABLE_TEST;
|
|
|
|
return phy_write(phydev, AT803X_CDT, cdt);
|
|
}
|
|
|
|
static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
|
|
{
|
|
int val, ret;
|
|
u16 cdt_en;
|
|
|
|
if (phydev->drv->phy_id == QCA8081_PHY_ID)
|
|
cdt_en = QCA808X_CDT_ENABLE_TEST;
|
|
else
|
|
cdt_en = AT803X_CDT_ENABLE_TEST;
|
|
|
|
/* One test run takes about 25ms */
|
|
ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
|
|
!(val & cdt_en),
|
|
30000, 100000, true);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
|
|
{
|
|
static const int ethtool_pair[] = {
|
|
ETHTOOL_A_CABLE_PAIR_A,
|
|
ETHTOOL_A_CABLE_PAIR_B,
|
|
ETHTOOL_A_CABLE_PAIR_C,
|
|
ETHTOOL_A_CABLE_PAIR_D,
|
|
};
|
|
int ret, val;
|
|
|
|
ret = at803x_cdt_start(phydev, pair);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = at803x_cdt_wait_for_completion(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = phy_read(phydev, AT803X_CDT_STATUS);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (at803x_cdt_test_failed(val))
|
|
return 0;
|
|
|
|
ethnl_cable_test_result(phydev, ethtool_pair[pair],
|
|
at803x_cable_test_result_trans(val));
|
|
|
|
if (at803x_cdt_fault_length_valid(val))
|
|
ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
|
|
at803x_cdt_fault_length(val));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int at803x_cable_test_get_status(struct phy_device *phydev,
|
|
bool *finished)
|
|
{
|
|
unsigned long pair_mask;
|
|
int retries = 20;
|
|
int pair, ret;
|
|
|
|
if (phydev->phy_id == ATH9331_PHY_ID ||
|
|
phydev->phy_id == ATH8032_PHY_ID ||
|
|
phydev->phy_id == QCA9561_PHY_ID)
|
|
pair_mask = 0x3;
|
|
else
|
|
pair_mask = 0xf;
|
|
|
|
*finished = false;
|
|
|
|
/* According to the datasheet the CDT can be performed when
|
|
* there is no link partner or when the link partner is
|
|
* auto-negotiating. Starting the test will restart the AN
|
|
* automatically. It seems that doing this repeatedly we will
|
|
* get a slot where our link partner won't disturb our
|
|
* measurement.
|
|
*/
|
|
while (pair_mask && retries--) {
|
|
for_each_set_bit(pair, &pair_mask, 4) {
|
|
ret = at803x_cable_test_one_pair(phydev, pair);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret)
|
|
clear_bit(pair, &pair_mask);
|
|
}
|
|
if (pair_mask)
|
|
msleep(250);
|
|
}
|
|
|
|
*finished = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at803x_cable_test_start(struct phy_device *phydev)
|
|
{
|
|
/* Enable auto-negotiation, but advertise no capabilities, no link
|
|
* will be established. A restart of the auto-negotiation is not
|
|
* required, because the cable test will automatically break the link.
|
|
*/
|
|
phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
|
|
phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
|
|
if (phydev->phy_id != ATH9331_PHY_ID &&
|
|
phydev->phy_id != ATH8032_PHY_ID &&
|
|
phydev->phy_id != QCA9561_PHY_ID)
|
|
phy_write(phydev, MII_CTRL1000, 0);
|
|
|
|
/* we do all the (time consuming) work later */
|
|
return 0;
|
|
}
|
|
|
|
static int qca83xx_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 switch_revision;
|
|
|
|
switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
|
|
|
|
switch (switch_revision) {
|
|
case 1:
|
|
/* For 100M waveform */
|
|
at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
|
|
/* Turn on Gigabit clock */
|
|
at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
|
|
break;
|
|
|
|
case 2:
|
|
phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
|
|
fallthrough;
|
|
case 4:
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
|
|
at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
|
|
at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
|
|
at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
|
|
break;
|
|
}
|
|
|
|
/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
|
|
* Disable on init and enable only with 100m speed following
|
|
* qca original source code.
|
|
*/
|
|
if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
|
|
phydev->drv->phy_id == QCA8327_B_PHY_ID)
|
|
at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
|
|
QCA8327_DEBUG_MANU_CTRL_EN, 0);
|
|
|
|
/* Following original QCA sourcecode set port to prefer master */
|
|
phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qca83xx_link_change_notify(struct phy_device *phydev)
|
|
{
|
|
/* QCA8337 doesn't require DAC Amplitude adjustement */
|
|
if (phydev->drv->phy_id == QCA8337_PHY_ID)
|
|
return;
|
|
|
|
/* Set DAC Amplitude adjustment to +6% for 100m on link running */
|
|
if (phydev->state == PHY_RUNNING) {
|
|
if (phydev->speed == SPEED_100)
|
|
at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
|
|
QCA8327_DEBUG_MANU_CTRL_EN,
|
|
QCA8327_DEBUG_MANU_CTRL_EN);
|
|
} else {
|
|
/* Reset DAC Amplitude adjustment */
|
|
at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
|
|
QCA8327_DEBUG_MANU_CTRL_EN, 0);
|
|
}
|
|
}
|
|
|
|
static int qca83xx_resume(struct phy_device *phydev)
|
|
{
|
|
int ret, val;
|
|
|
|
/* Skip reset if not suspended */
|
|
if (!phydev->suspended)
|
|
return 0;
|
|
|
|
/* Reinit the port, reset values set by suspend */
|
|
qca83xx_config_init(phydev);
|
|
|
|
/* Reset the port on port resume */
|
|
phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
|
|
|
|
/* On resume from suspend the switch execute a reset and
|
|
* restart auto-negotiation. Wait for reset to complete.
|
|
*/
|
|
ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
|
|
50000, 600000, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca83xx_suspend(struct phy_device *phydev)
|
|
{
|
|
u16 mask = 0;
|
|
|
|
/* Only QCA8337 support actual suspend.
|
|
* QCA8327 cause port unreliability when phy suspend
|
|
* is set.
|
|
*/
|
|
if (phydev->drv->phy_id == QCA8337_PHY_ID) {
|
|
genphy_suspend(phydev);
|
|
} else {
|
|
mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
|
|
phy_modify(phydev, MII_BMCR, mask, 0);
|
|
}
|
|
|
|
at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
|
|
AT803X_DEBUG_GATE_CLK_IN1000, 0);
|
|
|
|
at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
|
|
AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
|
|
AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable fast retrain */
|
|
ret = genphy_c45_fast_retrain(phydev, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
|
|
QCA808X_TOP_OPTION1_DATA);
|
|
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
|
|
QCA808X_MSE_THRESHOLD_20DB_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
|
|
QCA808X_MSE_THRESHOLD_17DB_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
|
|
QCA808X_MSE_THRESHOLD_27DB_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
|
|
QCA808X_MSE_THRESHOLD_28DB_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
|
|
QCA808X_MMD3_DEBUG_1_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
|
|
QCA808X_MMD3_DEBUG_4_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
|
|
QCA808X_MMD3_DEBUG_5_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
|
|
QCA808X_MMD3_DEBUG_3_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
|
|
QCA808X_MMD3_DEBUG_6_VALUE);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
|
|
QCA808X_MMD3_DEBUG_2_VALUE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
|
|
{
|
|
u16 seed_value = get_random_u32_below(QCA808X_MASTER_SLAVE_SEED_RANGE);
|
|
|
|
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
|
|
QCA808X_MASTER_SLAVE_SEED_CFG,
|
|
FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
|
|
}
|
|
|
|
static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
|
|
{
|
|
u16 seed_enable = 0;
|
|
|
|
if (enable)
|
|
seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
|
|
|
|
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
|
|
QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
|
|
}
|
|
|
|
static int qca808x_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Active adc&vga on 802.3az for the link 1000M and 100M */
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
|
|
QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Adjust the threshold on 802.3az for the link 1000M */
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
|
|
QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, QCA808X_MMD3_AZ_TRAINING_VAL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Config the fast retrain for the link 2500M */
|
|
ret = qca808x_phy_fast_retrain_config(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Configure lower ramdom seed to make phy linked as slave mode */
|
|
ret = qca808x_phy_ms_random_seed_set(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable seed */
|
|
ret = qca808x_phy_ms_seed_enable(phydev, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Configure adc threshold as 100mv for the link 10M */
|
|
return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
|
|
QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
|
|
}
|
|
|
|
static int qca808x_read_status(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
|
|
ret & MDIO_AN_10GBT_STAT_LP2_5G);
|
|
|
|
ret = genphy_read_status(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = at803x_read_specific_status(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (phydev->link) {
|
|
if (phydev->speed == SPEED_2500)
|
|
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
|
|
else
|
|
phydev->interface = PHY_INTERFACE_MODE_SGMII;
|
|
} else {
|
|
/* generate seed as a lower random value to make PHY linked as SLAVE easily,
|
|
* except for master/slave configuration fault detected.
|
|
* the reason for not putting this code into the function link_change_notify is
|
|
* the corner case where the link partner is also the qca8081 PHY and the seed
|
|
* value is configured as the same value, the link can't be up and no link change
|
|
* occurs.
|
|
*/
|
|
if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
|
|
qca808x_phy_ms_seed_enable(phydev, false);
|
|
} else {
|
|
qca808x_phy_ms_random_seed_set(phydev);
|
|
qca808x_phy_ms_seed_enable(phydev, true);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca808x_soft_reset(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_soft_reset(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return qca808x_phy_ms_seed_enable(phydev, true);
|
|
}
|
|
|
|
static bool qca808x_cdt_fault_length_valid(int cdt_code)
|
|
{
|
|
switch (cdt_code) {
|
|
case QCA808X_CDT_STATUS_STAT_SHORT:
|
|
case QCA808X_CDT_STATUS_STAT_OPEN:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int qca808x_cable_test_result_trans(int cdt_code)
|
|
{
|
|
switch (cdt_code) {
|
|
case QCA808X_CDT_STATUS_STAT_NORMAL:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OK;
|
|
case QCA808X_CDT_STATUS_STAT_SHORT:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
|
|
case QCA808X_CDT_STATUS_STAT_OPEN:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
|
|
case QCA808X_CDT_STATUS_STAT_FAIL:
|
|
default:
|
|
return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
|
|
}
|
|
}
|
|
|
|
static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
|
|
{
|
|
int val;
|
|
u32 cdt_length_reg = 0;
|
|
|
|
switch (pair) {
|
|
case ETHTOOL_A_CABLE_PAIR_A:
|
|
cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
|
|
break;
|
|
case ETHTOOL_A_CABLE_PAIR_B:
|
|
cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
|
|
break;
|
|
case ETHTOOL_A_CABLE_PAIR_C:
|
|
cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
|
|
break;
|
|
case ETHTOOL_A_CABLE_PAIR_D:
|
|
cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
|
|
}
|
|
|
|
static int qca808x_cable_test_start(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* perform CDT with the following configs:
|
|
* 1. disable hibernation.
|
|
* 2. force PHY working in MDI mode.
|
|
* 3. for PHY working in 1000BaseT.
|
|
* 4. configure the threshold.
|
|
*/
|
|
|
|
ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = at803x_config_mdix(phydev, ETH_TP_MDI);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->speed = SPEED_1000;
|
|
ret = genphy_c45_pma_setup_forced(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = genphy_setup_forced(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* configure the thresholds for open, short, pair ok test */
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
|
|
{
|
|
int ret, val;
|
|
int pair_a, pair_b, pair_c, pair_d;
|
|
|
|
*finished = false;
|
|
|
|
ret = at803x_cdt_start(phydev, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = at803x_cdt_wait_for_completion(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
|
|
pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
|
|
pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
|
|
pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
|
|
|
|
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
|
|
qca808x_cable_test_result_trans(pair_a));
|
|
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
|
|
qca808x_cable_test_result_trans(pair_b));
|
|
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
|
|
qca808x_cable_test_result_trans(pair_c));
|
|
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
|
|
qca808x_cable_test_result_trans(pair_d));
|
|
|
|
if (qca808x_cdt_fault_length_valid(pair_a))
|
|
ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
|
|
qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
|
|
if (qca808x_cdt_fault_length_valid(pair_b))
|
|
ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
|
|
qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
|
|
if (qca808x_cdt_fault_length_valid(pair_c))
|
|
ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
|
|
qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
|
|
if (qca808x_cdt_fault_length_valid(pair_d))
|
|
ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
|
|
qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
|
|
|
|
*finished = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver at803x_driver[] = {
|
|
{
|
|
/* Qualcomm Atheros AR8035 */
|
|
PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
|
|
.name = "Qualcomm Atheros AR8035",
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.probe = at803x_probe,
|
|
.config_aneg = at803x_config_aneg,
|
|
.config_init = at803x_config_init,
|
|
.soft_reset = genphy_soft_reset,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
/* PHY_GBIT_FEATURES */
|
|
.read_status = at803x_read_status,
|
|
.config_intr = at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.get_tunable = at803x_get_tunable,
|
|
.set_tunable = at803x_set_tunable,
|
|
.cable_test_start = at803x_cable_test_start,
|
|
.cable_test_get_status = at803x_cable_test_get_status,
|
|
}, {
|
|
/* Qualcomm Atheros AR8030 */
|
|
.phy_id = ATH8030_PHY_ID,
|
|
.name = "Qualcomm Atheros AR8030",
|
|
.phy_id_mask = AT8030_PHY_ID_MASK,
|
|
.probe = at803x_probe,
|
|
.config_init = at803x_config_init,
|
|
.link_change_notify = at803x_link_change_notify,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_intr = at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
}, {
|
|
/* Qualcomm Atheros AR8031/AR8033 */
|
|
PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
|
|
.name = "Qualcomm Atheros AR8031/AR8033",
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.probe = at803x_probe,
|
|
.config_init = at803x_config_init,
|
|
.config_aneg = at803x_config_aneg,
|
|
.soft_reset = genphy_soft_reset,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.read_page = at803x_read_page,
|
|
.write_page = at803x_write_page,
|
|
.get_features = at803x_get_features,
|
|
.read_status = at803x_read_status,
|
|
.config_intr = &at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.get_tunable = at803x_get_tunable,
|
|
.set_tunable = at803x_set_tunable,
|
|
.cable_test_start = at803x_cable_test_start,
|
|
.cable_test_get_status = at803x_cable_test_get_status,
|
|
}, {
|
|
/* Qualcomm Atheros AR8032 */
|
|
PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
|
|
.name = "Qualcomm Atheros AR8032",
|
|
.probe = at803x_probe,
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.config_init = at803x_config_init,
|
|
.link_change_notify = at803x_link_change_notify,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_intr = at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.cable_test_start = at803x_cable_test_start,
|
|
.cable_test_get_status = at803x_cable_test_get_status,
|
|
}, {
|
|
/* ATHEROS AR9331 */
|
|
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
|
|
.name = "Qualcomm Atheros AR9331 built-in PHY",
|
|
.probe = at803x_probe,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_intr = &at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.cable_test_start = at803x_cable_test_start,
|
|
.cable_test_get_status = at803x_cable_test_get_status,
|
|
.read_status = at803x_read_status,
|
|
.soft_reset = genphy_soft_reset,
|
|
.config_aneg = at803x_config_aneg,
|
|
}, {
|
|
/* Qualcomm Atheros QCA9561 */
|
|
PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
|
|
.name = "Qualcomm Atheros QCA9561 built-in PHY",
|
|
.probe = at803x_probe,
|
|
.suspend = at803x_suspend,
|
|
.resume = at803x_resume,
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_intr = &at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.cable_test_start = at803x_cable_test_start,
|
|
.cable_test_get_status = at803x_cable_test_get_status,
|
|
.read_status = at803x_read_status,
|
|
.soft_reset = genphy_soft_reset,
|
|
.config_aneg = at803x_config_aneg,
|
|
}, {
|
|
/* QCA8337 */
|
|
.phy_id = QCA8337_PHY_ID,
|
|
.phy_id_mask = QCA8K_PHY_ID_MASK,
|
|
.name = "Qualcomm Atheros 8337 internal PHY",
|
|
/* PHY_GBIT_FEATURES */
|
|
.link_change_notify = qca83xx_link_change_notify,
|
|
.probe = at803x_probe,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = qca83xx_config_init,
|
|
.soft_reset = genphy_soft_reset,
|
|
.get_sset_count = at803x_get_sset_count,
|
|
.get_strings = at803x_get_strings,
|
|
.get_stats = at803x_get_stats,
|
|
.suspend = qca83xx_suspend,
|
|
.resume = qca83xx_resume,
|
|
}, {
|
|
/* QCA8327-A from switch QCA8327-AL1A */
|
|
.phy_id = QCA8327_A_PHY_ID,
|
|
.phy_id_mask = QCA8K_PHY_ID_MASK,
|
|
.name = "Qualcomm Atheros 8327-A internal PHY",
|
|
/* PHY_GBIT_FEATURES */
|
|
.link_change_notify = qca83xx_link_change_notify,
|
|
.probe = at803x_probe,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = qca83xx_config_init,
|
|
.soft_reset = genphy_soft_reset,
|
|
.get_sset_count = at803x_get_sset_count,
|
|
.get_strings = at803x_get_strings,
|
|
.get_stats = at803x_get_stats,
|
|
.suspend = qca83xx_suspend,
|
|
.resume = qca83xx_resume,
|
|
}, {
|
|
/* QCA8327-B from switch QCA8327-BL1A */
|
|
.phy_id = QCA8327_B_PHY_ID,
|
|
.phy_id_mask = QCA8K_PHY_ID_MASK,
|
|
.name = "Qualcomm Atheros 8327-B internal PHY",
|
|
/* PHY_GBIT_FEATURES */
|
|
.link_change_notify = qca83xx_link_change_notify,
|
|
.probe = at803x_probe,
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = qca83xx_config_init,
|
|
.soft_reset = genphy_soft_reset,
|
|
.get_sset_count = at803x_get_sset_count,
|
|
.get_strings = at803x_get_strings,
|
|
.get_stats = at803x_get_stats,
|
|
.suspend = qca83xx_suspend,
|
|
.resume = qca83xx_resume,
|
|
}, {
|
|
/* Qualcomm QCA8081 */
|
|
PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
|
|
.name = "Qualcomm QCA8081",
|
|
.flags = PHY_POLL_CABLE_TEST,
|
|
.probe = at803x_probe,
|
|
.config_intr = at803x_config_intr,
|
|
.handle_interrupt = at803x_handle_interrupt,
|
|
.get_tunable = at803x_get_tunable,
|
|
.set_tunable = at803x_set_tunable,
|
|
.set_wol = at803x_set_wol,
|
|
.get_wol = at803x_get_wol,
|
|
.get_features = at803x_get_features,
|
|
.config_aneg = at803x_config_aneg,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_status = qca808x_read_status,
|
|
.config_init = qca808x_config_init,
|
|
.soft_reset = qca808x_soft_reset,
|
|
.cable_test_start = qca808x_cable_test_start,
|
|
.cable_test_get_status = qca808x_cable_test_get_status,
|
|
}, };
|
|
|
|
module_phy_driver(at803x_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
|
|
{ ATH8030_PHY_ID, AT8030_PHY_ID_MASK },
|
|
{ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
|
|
{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, atheros_tbl);
|