353 lines
9.2 KiB
C
353 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "mt76x0.h"
|
|
#include "mcu.h"
|
|
#include "../mt76x02_usb.h"
|
|
|
|
static struct usb_device_id mt76x0_device_table[] = {
|
|
{ USB_DEVICE(0x148F, 0x7610) }, /* MT7610U */
|
|
{ USB_DEVICE(0x13B1, 0x003E) }, /* Linksys AE6000 */
|
|
{ USB_DEVICE(0x0E8D, 0x7610) }, /* Sabrent NTWLAC */
|
|
{ USB_DEVICE(0x7392, 0xa711) }, /* Edimax 7711mac */
|
|
{ USB_DEVICE(0x7392, 0xb711) }, /* Edimax / Elecom */
|
|
{ USB_DEVICE(0x148f, 0x761a) }, /* TP-Link TL-WDN5200 */
|
|
{ USB_DEVICE(0x148f, 0x760a) }, /* TP-Link unknown */
|
|
{ USB_DEVICE(0x0b05, 0x17d1) }, /* Asus USB-AC51 */
|
|
{ USB_DEVICE(0x0b05, 0x17db) }, /* Asus USB-AC50 */
|
|
{ USB_DEVICE(0x0df6, 0x0075) }, /* Sitecom WLA-3100 */
|
|
{ USB_DEVICE(0x2019, 0xab31) }, /* Planex GW-450D */
|
|
{ USB_DEVICE(0x2001, 0x3d02) }, /* D-LINK DWA-171 rev B1 */
|
|
{ USB_DEVICE(0x0586, 0x3425) }, /* Zyxel NWD6505 */
|
|
{ USB_DEVICE(0x07b8, 0x7610) }, /* AboCom AU7212 */
|
|
{ USB_DEVICE(0x04bb, 0x0951) }, /* I-O DATA WN-AC433UK */
|
|
{ USB_DEVICE(0x057c, 0x8502) }, /* AVM FRITZ!WLAN USB Stick AC 430 */
|
|
{ USB_DEVICE(0x293c, 0x5702) }, /* Comcast Xfinity KXW02AAA */
|
|
{ USB_DEVICE(0x20f4, 0x806b) }, /* TRENDnet TEW-806UBH */
|
|
{ USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */
|
|
{ USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac Stick */
|
|
{ USB_DEVICE(0x2357, 0x0123) }, /* TP-LINK T2UHP_US_v1 */
|
|
{ USB_DEVICE(0x2357, 0x010b) }, /* TP-LINK T2UHP_UN_v1 */
|
|
/* TP-LINK Archer T1U */
|
|
{ USB_DEVICE(0x2357, 0x0105), .driver_info = 1, },
|
|
/* MT7630U */
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)},
|
|
/* MT7650U */
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)},
|
|
{ 0, }
|
|
};
|
|
|
|
static void mt76x0_init_usb_dma(struct mt76x02_dev *dev)
|
|
{
|
|
u32 val;
|
|
|
|
val = mt76_rr(dev, MT_USB_DMA_CFG);
|
|
|
|
val |= MT_USB_DMA_CFG_RX_BULK_EN |
|
|
MT_USB_DMA_CFG_TX_BULK_EN;
|
|
|
|
/* disable AGGR_BULK_RX in order to receive one
|
|
* frame in each rx urb and avoid copies
|
|
*/
|
|
val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
|
|
val = mt76_rr(dev, MT_COM_REG0);
|
|
if (val & 1)
|
|
dev_dbg(dev->mt76.dev, "MCU not ready\n");
|
|
|
|
val = mt76_rr(dev, MT_USB_DMA_CFG);
|
|
|
|
val |= MT_USB_DMA_CFG_RX_DROP_OR_PAD;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PAD;
|
|
mt76_wr(dev, MT_USB_DMA_CFG, val);
|
|
}
|
|
|
|
static void mt76x0u_cleanup(struct mt76x02_dev *dev)
|
|
{
|
|
clear_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
|
|
mt76x0_chip_onoff(dev, false, false);
|
|
mt76u_queues_deinit(&dev->mt76);
|
|
}
|
|
|
|
static void mt76x0u_stop(struct ieee80211_hw *hw)
|
|
{
|
|
struct mt76x02_dev *dev = hw->priv;
|
|
|
|
clear_bit(MT76_STATE_RUNNING, &dev->mphy.state);
|
|
cancel_delayed_work_sync(&dev->cal_work);
|
|
cancel_delayed_work_sync(&dev->mphy.mac_work);
|
|
mt76u_stop_tx(&dev->mt76);
|
|
mt76x02u_exit_beacon_config(dev);
|
|
|
|
if (test_bit(MT76_REMOVED, &dev->mphy.state))
|
|
return;
|
|
|
|
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "TX DMA did not stop\n");
|
|
|
|
mt76x0_mac_stop(dev);
|
|
|
|
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
|
|
dev_warn(dev->mt76.dev, "RX DMA did not stop\n");
|
|
}
|
|
|
|
static int mt76x0u_start(struct ieee80211_hw *hw)
|
|
{
|
|
struct mt76x02_dev *dev = hw->priv;
|
|
int ret;
|
|
|
|
ret = mt76x02u_mac_start(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mt76x0_phy_calibrate(dev, true);
|
|
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mphy.mac_work,
|
|
MT_MAC_WORK_INTERVAL);
|
|
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
|
|
MT_CALIBRATE_INTERVAL);
|
|
set_bit(MT76_STATE_RUNNING, &dev->mphy.state);
|
|
return 0;
|
|
}
|
|
|
|
static const struct ieee80211_ops mt76x0u_ops = {
|
|
.tx = mt76x02_tx,
|
|
.start = mt76x0u_start,
|
|
.stop = mt76x0u_stop,
|
|
.add_interface = mt76x02_add_interface,
|
|
.remove_interface = mt76x02_remove_interface,
|
|
.config = mt76x0_config,
|
|
.configure_filter = mt76x02_configure_filter,
|
|
.bss_info_changed = mt76x02_bss_info_changed,
|
|
.sta_state = mt76_sta_state,
|
|
.sta_pre_rcu_remove = mt76_sta_pre_rcu_remove,
|
|
.set_key = mt76x02_set_key,
|
|
.conf_tx = mt76x02_conf_tx,
|
|
.sw_scan_start = mt76_sw_scan,
|
|
.sw_scan_complete = mt76x02_sw_scan_complete,
|
|
.ampdu_action = mt76x02_ampdu_action,
|
|
.sta_rate_tbl_update = mt76x02_sta_rate_tbl_update,
|
|
.set_rts_threshold = mt76x02_set_rts_threshold,
|
|
.wake_tx_queue = mt76_wake_tx_queue,
|
|
.get_txpower = mt76_get_txpower,
|
|
.get_survey = mt76_get_survey,
|
|
.set_tim = mt76_set_tim,
|
|
.release_buffered_frames = mt76_release_buffered_frames,
|
|
.get_antenna = mt76_get_antenna,
|
|
.set_sar_specs = mt76x0_set_sar_specs,
|
|
};
|
|
|
|
static int mt76x0u_init_hardware(struct mt76x02_dev *dev, bool reset)
|
|
{
|
|
int err;
|
|
|
|
mt76x0_chip_onoff(dev, true, reset);
|
|
|
|
if (!mt76x02_wait_for_mac(&dev->mt76))
|
|
return -ETIMEDOUT;
|
|
|
|
err = mt76x0u_mcu_init(dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mt76x0_init_usb_dma(dev);
|
|
err = mt76x0_init_hardware(dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mt76x02u_init_beacon_config(dev);
|
|
|
|
mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e);
|
|
mt76_wr(dev, MT_TXOP_CTRL_CFG,
|
|
FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) |
|
|
FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt76x0u_register_device(struct mt76x02_dev *dev)
|
|
{
|
|
struct ieee80211_hw *hw = dev->mt76.hw;
|
|
struct mt76_usb *usb = &dev->mt76.usb;
|
|
int err;
|
|
|
|
usb->mcu.data = devm_kmalloc(dev->mt76.dev, MCU_RESP_URB_SIZE,
|
|
GFP_KERNEL);
|
|
if (!usb->mcu.data)
|
|
return -ENOMEM;
|
|
|
|
err = mt76u_alloc_queues(&dev->mt76);
|
|
if (err < 0)
|
|
goto out_err;
|
|
|
|
err = mt76x0u_init_hardware(dev, true);
|
|
if (err < 0)
|
|
goto out_err;
|
|
|
|
/* check hw sg support in order to enable AMSDU */
|
|
hw->max_tx_fragments = dev->mt76.usb.sg_en ? MT_TX_SG_MAX_SIZE : 1;
|
|
err = mt76x0_register_device(dev);
|
|
if (err < 0)
|
|
goto out_err;
|
|
|
|
set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
|
|
|
|
return 0;
|
|
|
|
out_err:
|
|
mt76x0u_cleanup(dev);
|
|
return err;
|
|
}
|
|
|
|
static int mt76x0u_probe(struct usb_interface *usb_intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
static const struct mt76_driver_ops drv_ops = {
|
|
.drv_flags = MT_DRV_SW_RX_AIRTIME,
|
|
.survey_flags = SURVEY_INFO_TIME_TX,
|
|
.update_survey = mt76x02_update_channel,
|
|
.tx_prepare_skb = mt76x02u_tx_prepare_skb,
|
|
.tx_complete_skb = mt76x02u_tx_complete_skb,
|
|
.tx_status_data = mt76x02_tx_status_data,
|
|
.rx_skb = mt76x02_queue_rx_skb,
|
|
.sta_ps = mt76x02_sta_ps,
|
|
.sta_add = mt76x02_sta_add,
|
|
.sta_remove = mt76x02_sta_remove,
|
|
};
|
|
struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
|
|
struct mt76x02_dev *dev;
|
|
struct mt76_dev *mdev;
|
|
u32 mac_rev;
|
|
int ret;
|
|
|
|
mdev = mt76_alloc_device(&usb_intf->dev, sizeof(*dev), &mt76x0u_ops,
|
|
&drv_ops);
|
|
if (!mdev)
|
|
return -ENOMEM;
|
|
|
|
dev = container_of(mdev, struct mt76x02_dev, mt76);
|
|
mutex_init(&dev->phy_mutex);
|
|
|
|
/* Quirk for Archer T1U */
|
|
if (id->driver_info)
|
|
dev->no_2ghz = true;
|
|
|
|
usb_dev = usb_get_dev(usb_dev);
|
|
usb_reset_device(usb_dev);
|
|
|
|
usb_set_intfdata(usb_intf, dev);
|
|
|
|
mt76x02u_init_mcu(mdev);
|
|
ret = mt76u_init(mdev, usb_intf);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Disable the HW, otherwise MCU fail to initialize on hot reboot */
|
|
mt76x0_chip_onoff(dev, false, false);
|
|
|
|
if (!mt76x02_wait_for_mac(mdev)) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
mdev->rev = mt76_rr(dev, MT_ASIC_VERSION);
|
|
mac_rev = mt76_rr(dev, MT_MAC_CSR0);
|
|
dev_info(mdev->dev, "ASIC revision: %08x MAC revision: %08x\n",
|
|
mdev->rev, mac_rev);
|
|
if (!is_mt76x0(dev)) {
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/* Note: vendor driver skips this check for MT76X0U */
|
|
if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL))
|
|
dev_warn(mdev->dev, "Warning: eFUSE not present\n");
|
|
|
|
ret = mt76x0u_register_device(dev);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
usb_set_intfdata(usb_intf, NULL);
|
|
usb_put_dev(interface_to_usbdev(usb_intf));
|
|
mt76u_queues_deinit(&dev->mt76);
|
|
mt76_free_device(&dev->mt76);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mt76x0_disconnect(struct usb_interface *usb_intf)
|
|
{
|
|
struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
|
|
bool initialized = test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
|
|
|
|
if (!initialized)
|
|
return;
|
|
|
|
ieee80211_unregister_hw(dev->mt76.hw);
|
|
mt76x0u_cleanup(dev);
|
|
|
|
usb_set_intfdata(usb_intf, NULL);
|
|
usb_put_dev(interface_to_usbdev(usb_intf));
|
|
|
|
mt76_free_device(&dev->mt76);
|
|
}
|
|
|
|
static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
|
|
pm_message_t state)
|
|
{
|
|
struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
|
|
|
|
mt76u_stop_rx(&dev->mt76);
|
|
clear_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
|
|
mt76x0_chip_onoff(dev, false, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
|
|
{
|
|
struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
|
|
int ret;
|
|
|
|
ret = mt76u_resume_rx(&dev->mt76);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = mt76x0u_init_hardware(dev, false);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
mt76x0u_cleanup(dev);
|
|
return ret;
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(usb, mt76x0_device_table);
|
|
MODULE_FIRMWARE(MT7610E_FIRMWARE);
|
|
MODULE_FIRMWARE(MT7610U_FIRMWARE);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct usb_driver mt76x0_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = mt76x0_device_table,
|
|
.probe = mt76x0u_probe,
|
|
.disconnect = mt76x0_disconnect,
|
|
.suspend = mt76x0_suspend,
|
|
.resume = mt76x0_resume,
|
|
.reset_resume = mt76x0_resume,
|
|
.soft_unbind = 1,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
module_usb_driver(mt76x0_driver);
|