716 lines
18 KiB
C
716 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (C) 2014-2017 Broadcom
|
|
|
|
/*
|
|
* This file contains the Broadcom Northstar Plus (NSP) GPIO driver that
|
|
* supports the chipCommonA GPIO controller. Basic PINCONF such as bias,
|
|
* pull up/down, slew and drive strength are also supported in this driver.
|
|
*
|
|
* Pins from the chipCommonA GPIO can be individually muxed to GPIO function,
|
|
* through the interaction with the NSP IOMUX controller.
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pinctrl-utils.h"
|
|
|
|
#define NSP_CHIP_A_INT_STATUS 0x00
|
|
#define NSP_CHIP_A_INT_MASK 0x04
|
|
#define NSP_GPIO_DATA_IN 0x40
|
|
#define NSP_GPIO_DATA_OUT 0x44
|
|
#define NSP_GPIO_OUT_EN 0x48
|
|
#define NSP_GPIO_INT_POLARITY 0x50
|
|
#define NSP_GPIO_INT_MASK 0x54
|
|
#define NSP_GPIO_EVENT 0x58
|
|
#define NSP_GPIO_EVENT_INT_MASK 0x5c
|
|
#define NSP_GPIO_EVENT_INT_POLARITY 0x64
|
|
#define NSP_CHIP_A_GPIO_INT_BIT 0x01
|
|
|
|
/* I/O parameters offset for chipcommon A GPIO */
|
|
#define NSP_GPIO_DRV_CTRL 0x00
|
|
#define NSP_GPIO_HYSTERESIS_EN 0x10
|
|
#define NSP_GPIO_SLEW_RATE_EN 0x14
|
|
#define NSP_PULL_UP_EN 0x18
|
|
#define NSP_PULL_DOWN_EN 0x1c
|
|
#define GPIO_DRV_STRENGTH_BITS 0x03
|
|
|
|
/*
|
|
* nsp GPIO core
|
|
*
|
|
* @dev: pointer to device
|
|
* @base: I/O register base for nsp GPIO controller
|
|
* @io_ctrl: I/O register base for PINCONF support outside the GPIO block
|
|
* @gc: GPIO chip
|
|
* @pctl: pointer to pinctrl_dev
|
|
* @pctldesc: pinctrl descriptor
|
|
* @lock: lock to protect access to I/O registers
|
|
*/
|
|
struct nsp_gpio {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
void __iomem *io_ctrl;
|
|
struct gpio_chip gc;
|
|
struct pinctrl_dev *pctl;
|
|
struct pinctrl_desc pctldesc;
|
|
raw_spinlock_t lock;
|
|
};
|
|
|
|
enum base_type {
|
|
REG,
|
|
IO_CTRL
|
|
};
|
|
|
|
/*
|
|
* Mapping from PINCONF pins to GPIO pins is 1-to-1
|
|
*/
|
|
static inline unsigned nsp_pin_to_gpio(unsigned pin)
|
|
{
|
|
return pin;
|
|
}
|
|
|
|
/*
|
|
* nsp_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
|
|
* nsp GPIO register
|
|
*
|
|
* @nsp_gpio: nsp GPIO device
|
|
* @base_type: reg base to modify
|
|
* @reg: register offset
|
|
* @gpio: GPIO pin
|
|
* @set: set or clear
|
|
*/
|
|
static inline void nsp_set_bit(struct nsp_gpio *chip, enum base_type address,
|
|
unsigned int reg, unsigned gpio, bool set)
|
|
{
|
|
u32 val;
|
|
void __iomem *base_address;
|
|
|
|
if (address == IO_CTRL)
|
|
base_address = chip->io_ctrl;
|
|
else
|
|
base_address = chip->base;
|
|
|
|
val = readl(base_address + reg);
|
|
if (set)
|
|
val |= BIT(gpio);
|
|
else
|
|
val &= ~BIT(gpio);
|
|
|
|
writel(val, base_address + reg);
|
|
}
|
|
|
|
/*
|
|
* nsp_get_bit - get one bit (corresponding to the GPIO pin) in a
|
|
* nsp GPIO register
|
|
*/
|
|
static inline bool nsp_get_bit(struct nsp_gpio *chip, enum base_type address,
|
|
unsigned int reg, unsigned gpio)
|
|
{
|
|
if (address == IO_CTRL)
|
|
return !!(readl(chip->io_ctrl + reg) & BIT(gpio));
|
|
else
|
|
return !!(readl(chip->base + reg) & BIT(gpio));
|
|
}
|
|
|
|
static irqreturn_t nsp_gpio_irq_handler(int irq, void *data)
|
|
{
|
|
struct gpio_chip *gc = (struct gpio_chip *)data;
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
int bit;
|
|
unsigned long int_bits = 0;
|
|
u32 int_status;
|
|
|
|
/* go through the entire GPIOs and handle all interrupts */
|
|
int_status = readl(chip->base + NSP_CHIP_A_INT_STATUS);
|
|
if (int_status & NSP_CHIP_A_GPIO_INT_BIT) {
|
|
unsigned int event, level;
|
|
|
|
/* Get level and edge interrupts */
|
|
event = readl(chip->base + NSP_GPIO_EVENT_INT_MASK) &
|
|
readl(chip->base + NSP_GPIO_EVENT);
|
|
level = readl(chip->base + NSP_GPIO_DATA_IN) ^
|
|
readl(chip->base + NSP_GPIO_INT_POLARITY);
|
|
level &= readl(chip->base + NSP_GPIO_INT_MASK);
|
|
int_bits = level | event;
|
|
|
|
for_each_set_bit(bit, &int_bits, gc->ngpio)
|
|
generic_handle_domain_irq(gc->irq.domain, bit);
|
|
}
|
|
|
|
return int_bits ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static void nsp_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned gpio = d->hwirq;
|
|
u32 val = BIT(gpio);
|
|
u32 trigger_type;
|
|
|
|
trigger_type = irq_get_trigger_type(d->irq);
|
|
if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
writel(val, chip->base + NSP_GPIO_EVENT);
|
|
}
|
|
|
|
/*
|
|
* nsp_gpio_irq_set_mask - mask/unmask a GPIO interrupt
|
|
*
|
|
* @d: IRQ chip data
|
|
* @unmask: mask/unmask GPIO interrupt
|
|
*/
|
|
static void nsp_gpio_irq_set_mask(struct irq_data *d, bool unmask)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned gpio = d->hwirq;
|
|
u32 trigger_type;
|
|
|
|
trigger_type = irq_get_trigger_type(d->irq);
|
|
if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_MASK, gpio, unmask);
|
|
else
|
|
nsp_set_bit(chip, REG, NSP_GPIO_INT_MASK, gpio, unmask);
|
|
}
|
|
|
|
static void nsp_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_gpio_irq_set_mask(d, false);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
gpiochip_disable_irq(gc, irqd_to_hwirq(d));
|
|
}
|
|
|
|
static void nsp_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
gpiochip_enable_irq(gc, irqd_to_hwirq(d));
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_gpio_irq_set_mask(d, true);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned gpio = d->hwirq;
|
|
bool level_low;
|
|
bool falling;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
falling = nsp_get_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio);
|
|
level_low = nsp_get_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio);
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
falling = false;
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
falling = true;
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
level_low = false;
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
level_low = true;
|
|
break;
|
|
|
|
default:
|
|
dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
|
|
type);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling);
|
|
nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low);
|
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
else
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio,
|
|
level_low ? "true" : "false", falling ? "true" : "false");
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_chip nsp_gpio_irq_chip = {
|
|
.name = "gpio-a",
|
|
.irq_ack = nsp_gpio_irq_ack,
|
|
.irq_mask = nsp_gpio_irq_mask,
|
|
.irq_unmask = nsp_gpio_irq_unmask,
|
|
.irq_set_type = nsp_gpio_irq_set_type,
|
|
.flags = IRQCHIP_IMMUTABLE,
|
|
GPIOCHIP_IRQ_RESOURCE_HELPERS,
|
|
};
|
|
|
|
static int nsp_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, false);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
|
|
int val)
|
|
{
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, true);
|
|
nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_gpio_get_direction(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
int val;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
val = nsp_get_bit(chip, REG, NSP_GPIO_OUT_EN, gpio);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return !val;
|
|
}
|
|
|
|
static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
|
|
{
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
|
|
}
|
|
|
|
static int nsp_gpio_get(struct gpio_chip *gc, unsigned gpio)
|
|
{
|
|
struct nsp_gpio *chip = gpiochip_get_data(gc);
|
|
|
|
return !!(readl(chip->base + NSP_GPIO_DATA_IN) & BIT(gpio));
|
|
}
|
|
|
|
static int nsp_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Only one group: "gpio_grp", since this local pinctrl device only performs
|
|
* GPIO specific PINCONF configurations
|
|
*/
|
|
static const char *nsp_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return "gpio_grp";
|
|
}
|
|
|
|
static const struct pinctrl_ops nsp_pctrl_ops = {
|
|
.get_groups_count = nsp_get_groups_count,
|
|
.get_group_name = nsp_get_group_name,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int nsp_gpio_set_slew(struct nsp_gpio *chip, unsigned gpio, u32 slew)
|
|
{
|
|
if (slew)
|
|
nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, true);
|
|
else
|
|
nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_gpio_set_pull(struct nsp_gpio *chip, unsigned gpio,
|
|
bool pull_up, bool pull_down)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
nsp_set_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio, pull_down);
|
|
nsp_set_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio, pull_up);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
dev_dbg(chip->dev, "gpio:%u set pullup:%d pulldown: %d\n",
|
|
gpio, pull_up, pull_down);
|
|
return 0;
|
|
}
|
|
|
|
static void nsp_gpio_get_pull(struct nsp_gpio *chip, unsigned gpio,
|
|
bool *pull_up, bool *pull_down)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
*pull_up = nsp_get_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio);
|
|
*pull_down = nsp_get_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio);
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
static int nsp_gpio_set_strength(struct nsp_gpio *chip, unsigned gpio,
|
|
u32 strength)
|
|
{
|
|
u32 offset, shift, i;
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
/* make sure drive strength is supported */
|
|
if (strength < 2 || strength > 16 || (strength % 2))
|
|
return -ENOTSUPP;
|
|
|
|
shift = gpio;
|
|
offset = NSP_GPIO_DRV_CTRL;
|
|
dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
|
|
strength);
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
strength = (strength / 2) - 1;
|
|
for (i = GPIO_DRV_STRENGTH_BITS; i > 0; i--) {
|
|
val = readl(chip->io_ctrl + offset);
|
|
val &= ~BIT(shift);
|
|
val |= ((strength >> (i-1)) & 0x1) << shift;
|
|
writel(val, chip->io_ctrl + offset);
|
|
offset += 4;
|
|
}
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_gpio_get_strength(struct nsp_gpio *chip, unsigned gpio,
|
|
u16 *strength)
|
|
{
|
|
unsigned int offset, shift;
|
|
u32 val;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
offset = NSP_GPIO_DRV_CTRL;
|
|
shift = gpio;
|
|
|
|
raw_spin_lock_irqsave(&chip->lock, flags);
|
|
*strength = 0;
|
|
for (i = (GPIO_DRV_STRENGTH_BITS - 1); i >= 0; i--) {
|
|
val = readl(chip->io_ctrl + offset) & BIT(shift);
|
|
val >>= shift;
|
|
*strength += (val << i);
|
|
offset += 4;
|
|
}
|
|
|
|
/* convert to mA */
|
|
*strength = (*strength + 1) * 2;
|
|
raw_spin_unlock_irqrestore(&chip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_pin_config_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
unsigned long *config)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_pin_config_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int nsp_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *config)
|
|
{
|
|
struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
unsigned int gpio;
|
|
u16 arg = 0;
|
|
bool pull_up, pull_down;
|
|
int ret;
|
|
|
|
gpio = nsp_pin_to_gpio(pin);
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
|
|
if ((pull_up == false) && (pull_down == false))
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
|
|
if (pull_up)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
|
|
if (pull_down)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = nsp_gpio_get_strength(chip, gpio, &arg);
|
|
if (ret)
|
|
return ret;
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
return 0;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int nsp_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
u32 arg;
|
|
unsigned int i, gpio;
|
|
int ret = -ENOTSUPP;
|
|
|
|
gpio = nsp_pin_to_gpio(pin);
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
ret = nsp_gpio_set_pull(chip, gpio, false, false);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
ret = nsp_gpio_set_pull(chip, gpio, true, false);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
ret = nsp_gpio_set_pull(chip, gpio, false, true);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = nsp_gpio_set_strength(chip, gpio, arg);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
ret = nsp_gpio_set_slew(chip, gpio, arg);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
default:
|
|
dev_err(chip->dev, "invalid configuration\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinconf_ops nsp_pconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_get = nsp_pin_config_get,
|
|
.pin_config_set = nsp_pin_config_set,
|
|
.pin_config_group_get = nsp_pin_config_group_get,
|
|
.pin_config_group_set = nsp_pin_config_group_set,
|
|
};
|
|
|
|
/*
|
|
* NSP GPIO controller supports some PINCONF related configurations such as
|
|
* pull up, pull down, slew and drive strength, when the pin is configured
|
|
* to GPIO.
|
|
*
|
|
* Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
|
|
* local GPIO pins
|
|
*/
|
|
static int nsp_gpio_register_pinconf(struct nsp_gpio *chip)
|
|
{
|
|
struct pinctrl_desc *pctldesc = &chip->pctldesc;
|
|
struct pinctrl_pin_desc *pins;
|
|
struct gpio_chip *gc = &chip->gc;
|
|
int i;
|
|
|
|
pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
|
|
if (!pins)
|
|
return -ENOMEM;
|
|
for (i = 0; i < gc->ngpio; i++) {
|
|
pins[i].number = i;
|
|
pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
|
|
"gpio-%d", i);
|
|
if (!pins[i].name)
|
|
return -ENOMEM;
|
|
}
|
|
pctldesc->name = dev_name(chip->dev);
|
|
pctldesc->pctlops = &nsp_pctrl_ops;
|
|
pctldesc->pins = pins;
|
|
pctldesc->npins = gc->ngpio;
|
|
pctldesc->confops = &nsp_pconf_ops;
|
|
|
|
chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
|
|
if (IS_ERR(chip->pctl)) {
|
|
dev_err(chip->dev, "unable to register pinctrl device\n");
|
|
return PTR_ERR(chip->pctl);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id nsp_gpio_of_match[] = {
|
|
{.compatible = "brcm,nsp-gpio-a",},
|
|
{}
|
|
};
|
|
|
|
static int nsp_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct nsp_gpio *chip;
|
|
struct gpio_chip *gc;
|
|
u32 val;
|
|
int irq, ret;
|
|
|
|
if (of_property_read_u32(pdev->dev.of_node, "ngpios", &val)) {
|
|
dev_err(&pdev->dev, "Missing ngpios OF property\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->dev = dev;
|
|
platform_set_drvdata(pdev, chip);
|
|
|
|
chip->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(chip->base)) {
|
|
dev_err(dev, "unable to map I/O memory\n");
|
|
return PTR_ERR(chip->base);
|
|
}
|
|
|
|
chip->io_ctrl = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(chip->io_ctrl)) {
|
|
dev_err(dev, "unable to map I/O memory\n");
|
|
return PTR_ERR(chip->io_ctrl);
|
|
}
|
|
|
|
raw_spin_lock_init(&chip->lock);
|
|
gc = &chip->gc;
|
|
gc->base = -1;
|
|
gc->can_sleep = false;
|
|
gc->ngpio = val;
|
|
gc->label = dev_name(dev);
|
|
gc->parent = dev;
|
|
gc->request = gpiochip_generic_request;
|
|
gc->free = gpiochip_generic_free;
|
|
gc->direction_input = nsp_gpio_direction_input;
|
|
gc->direction_output = nsp_gpio_direction_output;
|
|
gc->get_direction = nsp_gpio_get_direction;
|
|
gc->set = nsp_gpio_set;
|
|
gc->get = nsp_gpio_get;
|
|
|
|
/* optional GPIO interrupt support */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq > 0) {
|
|
struct gpio_irq_chip *girq;
|
|
|
|
val = readl(chip->base + NSP_CHIP_A_INT_MASK);
|
|
val = val | NSP_CHIP_A_GPIO_INT_BIT;
|
|
writel(val, (chip->base + NSP_CHIP_A_INT_MASK));
|
|
|
|
/* Install ISR for this GPIO controller. */
|
|
ret = devm_request_irq(dev, irq, nsp_gpio_irq_handler,
|
|
IRQF_SHARED, "gpio-a", &chip->gc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to request IRQ%d: %d\n",
|
|
irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
girq = &chip->gc.irq;
|
|
gpio_irq_chip_set_chip(girq, &nsp_gpio_irq_chip);
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, gc, chip);
|
|
if (ret < 0) {
|
|
dev_err(dev, "unable to add GPIO chip\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = nsp_gpio_register_pinconf(chip);
|
|
if (ret) {
|
|
dev_err(dev, "unable to register pinconf\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver nsp_gpio_driver = {
|
|
.driver = {
|
|
.name = "nsp-gpio-a",
|
|
.of_match_table = nsp_gpio_of_match,
|
|
},
|
|
.probe = nsp_gpio_probe,
|
|
};
|
|
|
|
static int __init nsp_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&nsp_gpio_driver);
|
|
}
|
|
arch_initcall_sync(nsp_gpio_init);
|