3659 lines
106 KiB
C
3659 lines
106 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2016 Linaro Ltd.
|
|
* Copyright (c) 2016 Hisilicon Limited.
|
|
*/
|
|
|
|
#include "hisi_sas.h"
|
|
#define DRV_NAME "hisi_sas_v2_hw"
|
|
|
|
/* global registers need init*/
|
|
#define DLVRY_QUEUE_ENABLE 0x0
|
|
#define IOST_BASE_ADDR_LO 0x8
|
|
#define IOST_BASE_ADDR_HI 0xc
|
|
#define ITCT_BASE_ADDR_LO 0x10
|
|
#define ITCT_BASE_ADDR_HI 0x14
|
|
#define IO_BROKEN_MSG_ADDR_LO 0x18
|
|
#define IO_BROKEN_MSG_ADDR_HI 0x1c
|
|
#define PHY_CONTEXT 0x20
|
|
#define PHY_STATE 0x24
|
|
#define PHY_PORT_NUM_MA 0x28
|
|
#define PORT_STATE 0x2c
|
|
#define PORT_STATE_PHY8_PORT_NUM_OFF 16
|
|
#define PORT_STATE_PHY8_PORT_NUM_MSK (0xf << PORT_STATE_PHY8_PORT_NUM_OFF)
|
|
#define PORT_STATE_PHY8_CONN_RATE_OFF 20
|
|
#define PORT_STATE_PHY8_CONN_RATE_MSK (0xf << PORT_STATE_PHY8_CONN_RATE_OFF)
|
|
#define PHY_CONN_RATE 0x30
|
|
#define HGC_TRANS_TASK_CNT_LIMIT 0x38
|
|
#define AXI_AHB_CLK_CFG 0x3c
|
|
#define ITCT_CLR 0x44
|
|
#define ITCT_CLR_EN_OFF 16
|
|
#define ITCT_CLR_EN_MSK (0x1 << ITCT_CLR_EN_OFF)
|
|
#define ITCT_DEV_OFF 0
|
|
#define ITCT_DEV_MSK (0x7ff << ITCT_DEV_OFF)
|
|
#define AXI_USER1 0x48
|
|
#define AXI_USER2 0x4c
|
|
#define IO_SATA_BROKEN_MSG_ADDR_LO 0x58
|
|
#define IO_SATA_BROKEN_MSG_ADDR_HI 0x5c
|
|
#define SATA_INITI_D2H_STORE_ADDR_LO 0x60
|
|
#define SATA_INITI_D2H_STORE_ADDR_HI 0x64
|
|
#define HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL 0x84
|
|
#define HGC_SAS_TXFAIL_RETRY_CTRL 0x88
|
|
#define HGC_GET_ITV_TIME 0x90
|
|
#define DEVICE_MSG_WORK_MODE 0x94
|
|
#define OPENA_WT_CONTI_TIME 0x9c
|
|
#define I_T_NEXUS_LOSS_TIME 0xa0
|
|
#define MAX_CON_TIME_LIMIT_TIME 0xa4
|
|
#define BUS_INACTIVE_LIMIT_TIME 0xa8
|
|
#define REJECT_TO_OPEN_LIMIT_TIME 0xac
|
|
#define CFG_AGING_TIME 0xbc
|
|
#define HGC_DFX_CFG2 0xc0
|
|
#define HGC_IOMB_PROC1_STATUS 0x104
|
|
#define CFG_1US_TIMER_TRSH 0xcc
|
|
#define HGC_LM_DFX_STATUS2 0x128
|
|
#define HGC_LM_DFX_STATUS2_IOSTLIST_OFF 0
|
|
#define HGC_LM_DFX_STATUS2_IOSTLIST_MSK (0xfff << \
|
|
HGC_LM_DFX_STATUS2_IOSTLIST_OFF)
|
|
#define HGC_LM_DFX_STATUS2_ITCTLIST_OFF 12
|
|
#define HGC_LM_DFX_STATUS2_ITCTLIST_MSK (0x7ff << \
|
|
HGC_LM_DFX_STATUS2_ITCTLIST_OFF)
|
|
#define HGC_CQE_ECC_ADDR 0x13c
|
|
#define HGC_CQE_ECC_1B_ADDR_OFF 0
|
|
#define HGC_CQE_ECC_1B_ADDR_MSK (0x3f << HGC_CQE_ECC_1B_ADDR_OFF)
|
|
#define HGC_CQE_ECC_MB_ADDR_OFF 8
|
|
#define HGC_CQE_ECC_MB_ADDR_MSK (0x3f << HGC_CQE_ECC_MB_ADDR_OFF)
|
|
#define HGC_IOST_ECC_ADDR 0x140
|
|
#define HGC_IOST_ECC_1B_ADDR_OFF 0
|
|
#define HGC_IOST_ECC_1B_ADDR_MSK (0x3ff << HGC_IOST_ECC_1B_ADDR_OFF)
|
|
#define HGC_IOST_ECC_MB_ADDR_OFF 16
|
|
#define HGC_IOST_ECC_MB_ADDR_MSK (0x3ff << HGC_IOST_ECC_MB_ADDR_OFF)
|
|
#define HGC_DQE_ECC_ADDR 0x144
|
|
#define HGC_DQE_ECC_1B_ADDR_OFF 0
|
|
#define HGC_DQE_ECC_1B_ADDR_MSK (0xfff << HGC_DQE_ECC_1B_ADDR_OFF)
|
|
#define HGC_DQE_ECC_MB_ADDR_OFF 16
|
|
#define HGC_DQE_ECC_MB_ADDR_MSK (0xfff << HGC_DQE_ECC_MB_ADDR_OFF)
|
|
#define HGC_INVLD_DQE_INFO 0x148
|
|
#define HGC_INVLD_DQE_INFO_FB_CH0_OFF 9
|
|
#define HGC_INVLD_DQE_INFO_FB_CH0_MSK (0x1 << HGC_INVLD_DQE_INFO_FB_CH0_OFF)
|
|
#define HGC_INVLD_DQE_INFO_FB_CH3_OFF 18
|
|
#define HGC_ITCT_ECC_ADDR 0x150
|
|
#define HGC_ITCT_ECC_1B_ADDR_OFF 0
|
|
#define HGC_ITCT_ECC_1B_ADDR_MSK (0x3ff << \
|
|
HGC_ITCT_ECC_1B_ADDR_OFF)
|
|
#define HGC_ITCT_ECC_MB_ADDR_OFF 16
|
|
#define HGC_ITCT_ECC_MB_ADDR_MSK (0x3ff << \
|
|
HGC_ITCT_ECC_MB_ADDR_OFF)
|
|
#define HGC_AXI_FIFO_ERR_INFO 0x154
|
|
#define AXI_ERR_INFO_OFF 0
|
|
#define AXI_ERR_INFO_MSK (0xff << AXI_ERR_INFO_OFF)
|
|
#define FIFO_ERR_INFO_OFF 8
|
|
#define FIFO_ERR_INFO_MSK (0xff << FIFO_ERR_INFO_OFF)
|
|
#define INT_COAL_EN 0x19c
|
|
#define OQ_INT_COAL_TIME 0x1a0
|
|
#define OQ_INT_COAL_CNT 0x1a4
|
|
#define ENT_INT_COAL_TIME 0x1a8
|
|
#define ENT_INT_COAL_CNT 0x1ac
|
|
#define OQ_INT_SRC 0x1b0
|
|
#define OQ_INT_SRC_MSK 0x1b4
|
|
#define ENT_INT_SRC1 0x1b8
|
|
#define ENT_INT_SRC1_D2H_FIS_CH0_OFF 0
|
|
#define ENT_INT_SRC1_D2H_FIS_CH0_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH0_OFF)
|
|
#define ENT_INT_SRC1_D2H_FIS_CH1_OFF 8
|
|
#define ENT_INT_SRC1_D2H_FIS_CH1_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH1_OFF)
|
|
#define ENT_INT_SRC2 0x1bc
|
|
#define ENT_INT_SRC3 0x1c0
|
|
#define ENT_INT_SRC3_WP_DEPTH_OFF 8
|
|
#define ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF 9
|
|
#define ENT_INT_SRC3_RP_DEPTH_OFF 10
|
|
#define ENT_INT_SRC3_AXI_OFF 11
|
|
#define ENT_INT_SRC3_FIFO_OFF 12
|
|
#define ENT_INT_SRC3_LM_OFF 14
|
|
#define ENT_INT_SRC3_ITC_INT_OFF 15
|
|
#define ENT_INT_SRC3_ITC_INT_MSK (0x1 << ENT_INT_SRC3_ITC_INT_OFF)
|
|
#define ENT_INT_SRC3_ABT_OFF 16
|
|
#define ENT_INT_SRC_MSK1 0x1c4
|
|
#define ENT_INT_SRC_MSK2 0x1c8
|
|
#define ENT_INT_SRC_MSK3 0x1cc
|
|
#define ENT_INT_SRC_MSK3_ENT95_MSK_OFF 31
|
|
#define ENT_INT_SRC_MSK3_ENT95_MSK_MSK (0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF)
|
|
#define SAS_ECC_INTR 0x1e8
|
|
#define SAS_ECC_INTR_DQE_ECC_1B_OFF 0
|
|
#define SAS_ECC_INTR_DQE_ECC_MB_OFF 1
|
|
#define SAS_ECC_INTR_IOST_ECC_1B_OFF 2
|
|
#define SAS_ECC_INTR_IOST_ECC_MB_OFF 3
|
|
#define SAS_ECC_INTR_ITCT_ECC_MB_OFF 4
|
|
#define SAS_ECC_INTR_ITCT_ECC_1B_OFF 5
|
|
#define SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF 6
|
|
#define SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF 7
|
|
#define SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF 8
|
|
#define SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF 9
|
|
#define SAS_ECC_INTR_CQE_ECC_1B_OFF 10
|
|
#define SAS_ECC_INTR_CQE_ECC_MB_OFF 11
|
|
#define SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF 12
|
|
#define SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF 13
|
|
#define SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF 14
|
|
#define SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF 15
|
|
#define SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF 16
|
|
#define SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF 17
|
|
#define SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF 18
|
|
#define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF 19
|
|
#define SAS_ECC_INTR_MSK 0x1ec
|
|
#define HGC_ERR_STAT_EN 0x238
|
|
#define CQE_SEND_CNT 0x248
|
|
#define DLVRY_Q_0_BASE_ADDR_LO 0x260
|
|
#define DLVRY_Q_0_BASE_ADDR_HI 0x264
|
|
#define DLVRY_Q_0_DEPTH 0x268
|
|
#define DLVRY_Q_0_WR_PTR 0x26c
|
|
#define DLVRY_Q_0_RD_PTR 0x270
|
|
#define HYPER_STREAM_ID_EN_CFG 0xc80
|
|
#define OQ0_INT_SRC_MSK 0xc90
|
|
#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
|
|
#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
|
|
#define COMPL_Q_0_DEPTH 0x4e8
|
|
#define COMPL_Q_0_WR_PTR 0x4ec
|
|
#define COMPL_Q_0_RD_PTR 0x4f0
|
|
#define HGC_RXM_DFX_STATUS14 0xae8
|
|
#define HGC_RXM_DFX_STATUS14_MEM0_OFF 0
|
|
#define HGC_RXM_DFX_STATUS14_MEM0_MSK (0x1ff << \
|
|
HGC_RXM_DFX_STATUS14_MEM0_OFF)
|
|
#define HGC_RXM_DFX_STATUS14_MEM1_OFF 9
|
|
#define HGC_RXM_DFX_STATUS14_MEM1_MSK (0x1ff << \
|
|
HGC_RXM_DFX_STATUS14_MEM1_OFF)
|
|
#define HGC_RXM_DFX_STATUS14_MEM2_OFF 18
|
|
#define HGC_RXM_DFX_STATUS14_MEM2_MSK (0x1ff << \
|
|
HGC_RXM_DFX_STATUS14_MEM2_OFF)
|
|
#define HGC_RXM_DFX_STATUS15 0xaec
|
|
#define HGC_RXM_DFX_STATUS15_MEM3_OFF 0
|
|
#define HGC_RXM_DFX_STATUS15_MEM3_MSK (0x1ff << \
|
|
HGC_RXM_DFX_STATUS15_MEM3_OFF)
|
|
/* phy registers need init */
|
|
#define PORT_BASE (0x2000)
|
|
|
|
#define PHY_CFG (PORT_BASE + 0x0)
|
|
#define HARD_PHY_LINKRATE (PORT_BASE + 0x4)
|
|
#define PHY_CFG_ENA_OFF 0
|
|
#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
|
|
#define PHY_CFG_DC_OPT_OFF 2
|
|
#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
|
|
#define PROG_PHY_LINK_RATE (PORT_BASE + 0x8)
|
|
#define PROG_PHY_LINK_RATE_MAX_OFF 0
|
|
#define PROG_PHY_LINK_RATE_MAX_MSK (0xff << PROG_PHY_LINK_RATE_MAX_OFF)
|
|
#define PHY_CTRL (PORT_BASE + 0x14)
|
|
#define PHY_CTRL_RESET_OFF 0
|
|
#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
|
|
#define SAS_PHY_CTRL (PORT_BASE + 0x20)
|
|
#define SL_CFG (PORT_BASE + 0x84)
|
|
#define PHY_PCN (PORT_BASE + 0x44)
|
|
#define SL_TOUT_CFG (PORT_BASE + 0x8c)
|
|
#define SL_CONTROL (PORT_BASE + 0x94)
|
|
#define SL_CONTROL_NOTIFY_EN_OFF 0
|
|
#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
|
|
#define SL_CONTROL_CTA_OFF 17
|
|
#define SL_CONTROL_CTA_MSK (0x1 << SL_CONTROL_CTA_OFF)
|
|
#define RX_PRIMS_STATUS (PORT_BASE + 0x98)
|
|
#define RX_BCAST_CHG_OFF 1
|
|
#define RX_BCAST_CHG_MSK (0x1 << RX_BCAST_CHG_OFF)
|
|
#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
|
|
#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
|
|
#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
|
|
#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
|
|
#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
|
|
#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
|
|
#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
|
|
#define TXID_AUTO (PORT_BASE + 0xb8)
|
|
#define TXID_AUTO_CT3_OFF 1
|
|
#define TXID_AUTO_CT3_MSK (0x1 << TXID_AUTO_CT3_OFF)
|
|
#define TXID_AUTO_CTB_OFF 11
|
|
#define TXID_AUTO_CTB_MSK (0x1 << TXID_AUTO_CTB_OFF)
|
|
#define TX_HARDRST_OFF 2
|
|
#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF)
|
|
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
|
|
#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
|
|
#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
|
|
#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
|
|
#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
|
|
#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
|
|
#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
|
|
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
|
|
#define CON_CONTROL (PORT_BASE + 0x118)
|
|
#define CON_CONTROL_CFG_OPEN_ACC_STP_OFF 0
|
|
#define CON_CONTROL_CFG_OPEN_ACC_STP_MSK \
|
|
(0x01 << CON_CONTROL_CFG_OPEN_ACC_STP_OFF)
|
|
#define DONE_RECEIVED_TIME (PORT_BASE + 0x11c)
|
|
#define CHL_INT0 (PORT_BASE + 0x1b4)
|
|
#define CHL_INT0_HOTPLUG_TOUT_OFF 0
|
|
#define CHL_INT0_HOTPLUG_TOUT_MSK (0x1 << CHL_INT0_HOTPLUG_TOUT_OFF)
|
|
#define CHL_INT0_SL_RX_BCST_ACK_OFF 1
|
|
#define CHL_INT0_SL_RX_BCST_ACK_MSK (0x1 << CHL_INT0_SL_RX_BCST_ACK_OFF)
|
|
#define CHL_INT0_SL_PHY_ENABLE_OFF 2
|
|
#define CHL_INT0_SL_PHY_ENABLE_MSK (0x1 << CHL_INT0_SL_PHY_ENABLE_OFF)
|
|
#define CHL_INT0_NOT_RDY_OFF 4
|
|
#define CHL_INT0_NOT_RDY_MSK (0x1 << CHL_INT0_NOT_RDY_OFF)
|
|
#define CHL_INT0_PHY_RDY_OFF 5
|
|
#define CHL_INT0_PHY_RDY_MSK (0x1 << CHL_INT0_PHY_RDY_OFF)
|
|
#define CHL_INT1 (PORT_BASE + 0x1b8)
|
|
#define CHL_INT1_DMAC_TX_ECC_ERR_OFF 15
|
|
#define CHL_INT1_DMAC_TX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF)
|
|
#define CHL_INT1_DMAC_RX_ECC_ERR_OFF 17
|
|
#define CHL_INT1_DMAC_RX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF)
|
|
#define CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF 19
|
|
#define CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF 20
|
|
#define CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF 21
|
|
#define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22
|
|
#define CHL_INT2 (PORT_BASE + 0x1bc)
|
|
#define CHL_INT2_SL_IDAF_TOUT_CONF_OFF 0
|
|
#define CHL_INT0_MSK (PORT_BASE + 0x1c0)
|
|
#define CHL_INT1_MSK (PORT_BASE + 0x1c4)
|
|
#define CHL_INT2_MSK (PORT_BASE + 0x1c8)
|
|
#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
|
|
#define DMA_TX_DFX0 (PORT_BASE + 0x200)
|
|
#define DMA_TX_DFX1 (PORT_BASE + 0x204)
|
|
#define DMA_TX_DFX1_IPTT_OFF 0
|
|
#define DMA_TX_DFX1_IPTT_MSK (0xffff << DMA_TX_DFX1_IPTT_OFF)
|
|
#define DMA_TX_FIFO_DFX0 (PORT_BASE + 0x240)
|
|
#define PORT_DFX0 (PORT_BASE + 0x258)
|
|
#define LINK_DFX2 (PORT_BASE + 0X264)
|
|
#define LINK_DFX2_RCVR_HOLD_STS_OFF 9
|
|
#define LINK_DFX2_RCVR_HOLD_STS_MSK (0x1 << LINK_DFX2_RCVR_HOLD_STS_OFF)
|
|
#define LINK_DFX2_SEND_HOLD_STS_OFF 10
|
|
#define LINK_DFX2_SEND_HOLD_STS_MSK (0x1 << LINK_DFX2_SEND_HOLD_STS_OFF)
|
|
#define SAS_ERR_CNT4_REG (PORT_BASE + 0x290)
|
|
#define SAS_ERR_CNT6_REG (PORT_BASE + 0x298)
|
|
#define PHY_CTRL_RDY_MSK (PORT_BASE + 0x2b0)
|
|
#define PHYCTRL_NOT_RDY_MSK (PORT_BASE + 0x2b4)
|
|
#define PHYCTRL_DWS_RESET_MSK (PORT_BASE + 0x2b8)
|
|
#define PHYCTRL_PHY_ENA_MSK (PORT_BASE + 0x2bc)
|
|
#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0)
|
|
#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4)
|
|
#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
|
|
#define DMA_TX_STATUS_BUSY_OFF 0
|
|
#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
|
|
#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
|
|
#define DMA_RX_STATUS_BUSY_OFF 0
|
|
#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
|
|
|
|
#define AXI_CFG (0x5100)
|
|
#define AM_CFG_MAX_TRANS (0x5010)
|
|
#define AM_CFG_SINGLE_PORT_MAX_TRANS (0x5014)
|
|
|
|
#define AXI_MASTER_CFG_BASE (0x5000)
|
|
#define AM_CTRL_GLOBAL (0x0)
|
|
#define AM_CURR_TRANS_RETURN (0x150)
|
|
|
|
/* HW dma structures */
|
|
/* Delivery queue header */
|
|
/* dw0 */
|
|
#define CMD_HDR_ABORT_FLAG_OFF 0
|
|
#define CMD_HDR_ABORT_FLAG_MSK (0x3 << CMD_HDR_ABORT_FLAG_OFF)
|
|
#define CMD_HDR_ABORT_DEVICE_TYPE_OFF 2
|
|
#define CMD_HDR_ABORT_DEVICE_TYPE_MSK (0x1 << CMD_HDR_ABORT_DEVICE_TYPE_OFF)
|
|
#define CMD_HDR_RESP_REPORT_OFF 5
|
|
#define CMD_HDR_RESP_REPORT_MSK (0x1 << CMD_HDR_RESP_REPORT_OFF)
|
|
#define CMD_HDR_TLR_CTRL_OFF 6
|
|
#define CMD_HDR_TLR_CTRL_MSK (0x3 << CMD_HDR_TLR_CTRL_OFF)
|
|
#define CMD_HDR_PHY_ID_OFF 8
|
|
#define CMD_HDR_PHY_ID_MSK (0x1ff << CMD_HDR_PHY_ID_OFF)
|
|
#define CMD_HDR_FORCE_PHY_OFF 17
|
|
#define CMD_HDR_FORCE_PHY_MSK (0x1 << CMD_HDR_FORCE_PHY_OFF)
|
|
#define CMD_HDR_PORT_OFF 18
|
|
#define CMD_HDR_PORT_MSK (0xf << CMD_HDR_PORT_OFF)
|
|
#define CMD_HDR_PRIORITY_OFF 27
|
|
#define CMD_HDR_PRIORITY_MSK (0x1 << CMD_HDR_PRIORITY_OFF)
|
|
#define CMD_HDR_CMD_OFF 29
|
|
#define CMD_HDR_CMD_MSK (0x7 << CMD_HDR_CMD_OFF)
|
|
/* dw1 */
|
|
#define CMD_HDR_DIR_OFF 5
|
|
#define CMD_HDR_DIR_MSK (0x3 << CMD_HDR_DIR_OFF)
|
|
#define CMD_HDR_RESET_OFF 7
|
|
#define CMD_HDR_RESET_MSK (0x1 << CMD_HDR_RESET_OFF)
|
|
#define CMD_HDR_VDTL_OFF 10
|
|
#define CMD_HDR_VDTL_MSK (0x1 << CMD_HDR_VDTL_OFF)
|
|
#define CMD_HDR_FRAME_TYPE_OFF 11
|
|
#define CMD_HDR_FRAME_TYPE_MSK (0x1f << CMD_HDR_FRAME_TYPE_OFF)
|
|
#define CMD_HDR_DEV_ID_OFF 16
|
|
#define CMD_HDR_DEV_ID_MSK (0xffff << CMD_HDR_DEV_ID_OFF)
|
|
/* dw2 */
|
|
#define CMD_HDR_CFL_OFF 0
|
|
#define CMD_HDR_CFL_MSK (0x1ff << CMD_HDR_CFL_OFF)
|
|
#define CMD_HDR_NCQ_TAG_OFF 10
|
|
#define CMD_HDR_NCQ_TAG_MSK (0x1f << CMD_HDR_NCQ_TAG_OFF)
|
|
#define CMD_HDR_MRFL_OFF 15
|
|
#define CMD_HDR_MRFL_MSK (0x1ff << CMD_HDR_MRFL_OFF)
|
|
#define CMD_HDR_SG_MOD_OFF 24
|
|
#define CMD_HDR_SG_MOD_MSK (0x3 << CMD_HDR_SG_MOD_OFF)
|
|
#define CMD_HDR_FIRST_BURST_OFF 26
|
|
#define CMD_HDR_FIRST_BURST_MSK (0x1 << CMD_HDR_SG_MOD_OFF)
|
|
/* dw3 */
|
|
#define CMD_HDR_IPTT_OFF 0
|
|
#define CMD_HDR_IPTT_MSK (0xffff << CMD_HDR_IPTT_OFF)
|
|
/* dw6 */
|
|
#define CMD_HDR_DIF_SGL_LEN_OFF 0
|
|
#define CMD_HDR_DIF_SGL_LEN_MSK (0xffff << CMD_HDR_DIF_SGL_LEN_OFF)
|
|
#define CMD_HDR_DATA_SGL_LEN_OFF 16
|
|
#define CMD_HDR_DATA_SGL_LEN_MSK (0xffff << CMD_HDR_DATA_SGL_LEN_OFF)
|
|
#define CMD_HDR_ABORT_IPTT_OFF 16
|
|
#define CMD_HDR_ABORT_IPTT_MSK (0xffff << CMD_HDR_ABORT_IPTT_OFF)
|
|
|
|
/* Completion header */
|
|
/* dw0 */
|
|
#define CMPLT_HDR_ERR_PHASE_OFF 2
|
|
#define CMPLT_HDR_ERR_PHASE_MSK (0xff << CMPLT_HDR_ERR_PHASE_OFF)
|
|
#define CMPLT_HDR_RSPNS_XFRD_OFF 10
|
|
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
|
|
#define CMPLT_HDR_ERX_OFF 12
|
|
#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF)
|
|
#define CMPLT_HDR_ABORT_STAT_OFF 13
|
|
#define CMPLT_HDR_ABORT_STAT_MSK (0x7 << CMPLT_HDR_ABORT_STAT_OFF)
|
|
/* abort_stat */
|
|
#define STAT_IO_NOT_VALID 0x1
|
|
#define STAT_IO_NO_DEVICE 0x2
|
|
#define STAT_IO_COMPLETE 0x3
|
|
#define STAT_IO_ABORTED 0x4
|
|
/* dw1 */
|
|
#define CMPLT_HDR_IPTT_OFF 0
|
|
#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
|
|
#define CMPLT_HDR_DEV_ID_OFF 16
|
|
#define CMPLT_HDR_DEV_ID_MSK (0xffff << CMPLT_HDR_DEV_ID_OFF)
|
|
|
|
/* ITCT header */
|
|
/* qw0 */
|
|
#define ITCT_HDR_DEV_TYPE_OFF 0
|
|
#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
|
|
#define ITCT_HDR_VALID_OFF 2
|
|
#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
|
|
#define ITCT_HDR_MCR_OFF 5
|
|
#define ITCT_HDR_MCR_MSK (0xf << ITCT_HDR_MCR_OFF)
|
|
#define ITCT_HDR_VLN_OFF 9
|
|
#define ITCT_HDR_VLN_MSK (0xf << ITCT_HDR_VLN_OFF)
|
|
#define ITCT_HDR_SMP_TIMEOUT_OFF 16
|
|
#define ITCT_HDR_SMP_TIMEOUT_8US 1
|
|
#define ITCT_HDR_SMP_TIMEOUT (ITCT_HDR_SMP_TIMEOUT_8US * \
|
|
250) /* 2ms */
|
|
#define ITCT_HDR_AWT_CONTINUE_OFF 25
|
|
#define ITCT_HDR_PORT_ID_OFF 28
|
|
#define ITCT_HDR_PORT_ID_MSK (0xf << ITCT_HDR_PORT_ID_OFF)
|
|
/* qw2 */
|
|
#define ITCT_HDR_INLT_OFF 0
|
|
#define ITCT_HDR_INLT_MSK (0xffffULL << ITCT_HDR_INLT_OFF)
|
|
#define ITCT_HDR_BITLT_OFF 16
|
|
#define ITCT_HDR_BITLT_MSK (0xffffULL << ITCT_HDR_BITLT_OFF)
|
|
#define ITCT_HDR_MCTLT_OFF 32
|
|
#define ITCT_HDR_MCTLT_MSK (0xffffULL << ITCT_HDR_MCTLT_OFF)
|
|
#define ITCT_HDR_RTOLT_OFF 48
|
|
#define ITCT_HDR_RTOLT_MSK (0xffffULL << ITCT_HDR_RTOLT_OFF)
|
|
|
|
#define HISI_SAS_FATAL_INT_NR 2
|
|
|
|
struct hisi_sas_complete_v2_hdr {
|
|
__le32 dw0;
|
|
__le32 dw1;
|
|
__le32 act;
|
|
__le32 dw3;
|
|
};
|
|
|
|
struct hisi_sas_err_record_v2 {
|
|
/* dw0 */
|
|
__le32 trans_tx_fail_type;
|
|
|
|
/* dw1 */
|
|
__le32 trans_rx_fail_type;
|
|
|
|
/* dw2 */
|
|
__le16 dma_tx_err_type;
|
|
__le16 sipc_rx_err_type;
|
|
|
|
/* dw3 */
|
|
__le32 dma_rx_err_type;
|
|
};
|
|
|
|
struct signal_attenuation_s {
|
|
u32 de_emphasis;
|
|
u32 preshoot;
|
|
u32 boost;
|
|
};
|
|
|
|
struct sig_atten_lu_s {
|
|
const struct signal_attenuation_s *att;
|
|
u32 sas_phy_ctrl;
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error one_bit_ecc_errors[] = {
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF),
|
|
.msk = HGC_DQE_ECC_1B_ADDR_MSK,
|
|
.shift = HGC_DQE_ECC_1B_ADDR_OFF,
|
|
.msg = "hgc_dqe_ecc1b_intr",
|
|
.reg = HGC_DQE_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF),
|
|
.msk = HGC_IOST_ECC_1B_ADDR_MSK,
|
|
.shift = HGC_IOST_ECC_1B_ADDR_OFF,
|
|
.msg = "hgc_iost_ecc1b_intr",
|
|
.reg = HGC_IOST_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF),
|
|
.msk = HGC_ITCT_ECC_1B_ADDR_MSK,
|
|
.shift = HGC_ITCT_ECC_1B_ADDR_OFF,
|
|
.msg = "hgc_itct_ecc1b_intr",
|
|
.reg = HGC_ITCT_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF),
|
|
.msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
|
|
.shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
|
|
.msg = "hgc_iostl_ecc1b_intr",
|
|
.reg = HGC_LM_DFX_STATUS2,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF),
|
|
.msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
|
|
.shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
|
|
.msg = "hgc_itctl_ecc1b_intr",
|
|
.reg = HGC_LM_DFX_STATUS2,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF),
|
|
.msk = HGC_CQE_ECC_1B_ADDR_MSK,
|
|
.shift = HGC_CQE_ECC_1B_ADDR_OFF,
|
|
.msg = "hgc_cqe_ecc1b_intr",
|
|
.reg = HGC_CQE_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
|
|
.msg = "rxm_mem0_ecc1b_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
|
|
.msg = "rxm_mem1_ecc1b_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
|
|
.msg = "rxm_mem2_ecc1b_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
|
|
.msg = "rxm_mem3_ecc1b_intr",
|
|
.reg = HGC_RXM_DFX_STATUS15,
|
|
},
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error multi_bit_ecc_errors[] = {
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF),
|
|
.msk = HGC_DQE_ECC_MB_ADDR_MSK,
|
|
.shift = HGC_DQE_ECC_MB_ADDR_OFF,
|
|
.msg = "hgc_dqe_eccbad_intr",
|
|
.reg = HGC_DQE_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF),
|
|
.msk = HGC_IOST_ECC_MB_ADDR_MSK,
|
|
.shift = HGC_IOST_ECC_MB_ADDR_OFF,
|
|
.msg = "hgc_iost_eccbad_intr",
|
|
.reg = HGC_IOST_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF),
|
|
.msk = HGC_ITCT_ECC_MB_ADDR_MSK,
|
|
.shift = HGC_ITCT_ECC_MB_ADDR_OFF,
|
|
.msg = "hgc_itct_eccbad_intr",
|
|
.reg = HGC_ITCT_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF),
|
|
.msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
|
|
.shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
|
|
.msg = "hgc_iostl_eccbad_intr",
|
|
.reg = HGC_LM_DFX_STATUS2,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF),
|
|
.msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
|
|
.shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
|
|
.msg = "hgc_itctl_eccbad_intr",
|
|
.reg = HGC_LM_DFX_STATUS2,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF),
|
|
.msk = HGC_CQE_ECC_MB_ADDR_MSK,
|
|
.shift = HGC_CQE_ECC_MB_ADDR_OFF,
|
|
.msg = "hgc_cqe_eccbad_intr",
|
|
.reg = HGC_CQE_ECC_ADDR,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
|
|
.msg = "rxm_mem0_eccbad_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
|
|
.msg = "rxm_mem1_eccbad_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
|
|
.msg = "rxm_mem2_eccbad_intr",
|
|
.reg = HGC_RXM_DFX_STATUS14,
|
|
},
|
|
{
|
|
.irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF),
|
|
.msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
|
|
.shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
|
|
.msg = "rxm_mem3_eccbad_intr",
|
|
.reg = HGC_RXM_DFX_STATUS15,
|
|
},
|
|
};
|
|
|
|
enum {
|
|
HISI_SAS_PHY_PHY_UPDOWN,
|
|
HISI_SAS_PHY_CHNL_INT,
|
|
HISI_SAS_PHY_INT_NR
|
|
};
|
|
|
|
enum {
|
|
TRANS_TX_FAIL_BASE = 0x0, /* dw0 */
|
|
TRANS_RX_FAIL_BASE = 0x20, /* dw1 */
|
|
DMA_TX_ERR_BASE = 0x40, /* dw2 bit 15-0 */
|
|
SIPC_RX_ERR_BASE = 0x50, /* dw2 bit 31-16*/
|
|
DMA_RX_ERR_BASE = 0x60, /* dw3 */
|
|
|
|
/* trans tx*/
|
|
TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS = TRANS_TX_FAIL_BASE, /* 0x0 */
|
|
TRANS_TX_ERR_PHY_NOT_ENABLE, /* 0x1 */
|
|
TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION, /* 0x2 */
|
|
TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION, /* 0x3 */
|
|
TRANS_TX_OPEN_CNX_ERR_BY_OTHER, /* 0x4 */
|
|
RESERVED0, /* 0x5 */
|
|
TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT, /* 0x6 */
|
|
TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY, /* 0x7 */
|
|
TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED, /* 0x8 */
|
|
TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED, /* 0x9 */
|
|
TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION, /* 0xa */
|
|
TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD, /* 0xb */
|
|
TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER, /* 0xc */
|
|
TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED, /* 0xd */
|
|
TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT, /* 0xe */
|
|
TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION, /* 0xf */
|
|
TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED, /* 0x10 */
|
|
TRANS_TX_ERR_FRAME_TXED, /* 0x11 */
|
|
TRANS_TX_ERR_WITH_BREAK_TIMEOUT, /* 0x12 */
|
|
TRANS_TX_ERR_WITH_BREAK_REQUEST, /* 0x13 */
|
|
TRANS_TX_ERR_WITH_BREAK_RECEVIED, /* 0x14 */
|
|
TRANS_TX_ERR_WITH_CLOSE_TIMEOUT, /* 0x15 */
|
|
TRANS_TX_ERR_WITH_CLOSE_NORMAL, /* 0x16 for ssp*/
|
|
TRANS_TX_ERR_WITH_CLOSE_PHYDISALE, /* 0x17 */
|
|
TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x18 */
|
|
TRANS_TX_ERR_WITH_CLOSE_COMINIT, /* 0x19 */
|
|
TRANS_TX_ERR_WITH_NAK_RECEVIED, /* 0x1a for ssp*/
|
|
TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT, /* 0x1b for ssp*/
|
|
/*IO_TX_ERR_WITH_R_ERR_RECEVIED, [> 0x1b for sata/stp<] */
|
|
TRANS_TX_ERR_WITH_CREDIT_TIMEOUT, /* 0x1c for ssp */
|
|
/*IO_RX_ERR_WITH_SATA_DEVICE_LOST 0x1c for sata/stp */
|
|
TRANS_TX_ERR_WITH_IPTT_CONFLICT, /* 0x1d for ssp/smp */
|
|
TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS, /* 0x1e */
|
|
/*IO_TX_ERR_WITH_SYNC_RXD, [> 0x1e <] for sata/stp */
|
|
TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT, /* 0x1f for sata/stp */
|
|
|
|
/* trans rx */
|
|
TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x20 */
|
|
TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR, /* 0x21 for sata/stp */
|
|
TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM, /* 0x22 for ssp/smp */
|
|
/*IO_ERR_WITH_RXFIS_8B10B_CODE_ERR, [> 0x22 <] for sata/stp */
|
|
TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR, /* 0x23 for sata/stp */
|
|
TRANS_RX_ERR_WITH_RXFIS_CRC_ERR, /* 0x24 for sata/stp */
|
|
TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN, /* 0x25 for smp */
|
|
/*IO_ERR_WITH_RXFIS_TX SYNCP, [> 0x25 <] for sata/stp */
|
|
TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP, /* 0x26 for sata/stp*/
|
|
TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN, /* 0x27 */
|
|
TRANS_RX_ERR_WITH_BREAK_TIMEOUT, /* 0x28 */
|
|
TRANS_RX_ERR_WITH_BREAK_REQUEST, /* 0x29 */
|
|
TRANS_RX_ERR_WITH_BREAK_RECEVIED, /* 0x2a */
|
|
RESERVED1, /* 0x2b */
|
|
TRANS_RX_ERR_WITH_CLOSE_NORMAL, /* 0x2c */
|
|
TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE, /* 0x2d */
|
|
TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x2e */
|
|
TRANS_RX_ERR_WITH_CLOSE_COMINIT, /* 0x2f */
|
|
TRANS_RX_ERR_WITH_DATA_LEN0, /* 0x30 for ssp/smp */
|
|
TRANS_RX_ERR_WITH_BAD_HASH, /* 0x31 for ssp */
|
|
/*IO_RX_ERR_WITH_FIS_TOO_SHORT, [> 0x31 <] for sata/stp */
|
|
TRANS_RX_XRDY_WLEN_ZERO_ERR, /* 0x32 for ssp*/
|
|
/*IO_RX_ERR_WITH_FIS_TOO_LONG, [> 0x32 <] for sata/stp */
|
|
TRANS_RX_SSP_FRM_LEN_ERR, /* 0x33 for ssp */
|
|
/*IO_RX_ERR_WITH_SATA_DEVICE_LOST, [> 0x33 <] for sata */
|
|
RESERVED2, /* 0x34 */
|
|
RESERVED3, /* 0x35 */
|
|
RESERVED4, /* 0x36 */
|
|
RESERVED5, /* 0x37 */
|
|
TRANS_RX_ERR_WITH_BAD_FRM_TYPE, /* 0x38 */
|
|
TRANS_RX_SMP_FRM_LEN_ERR, /* 0x39 */
|
|
TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x3a */
|
|
RESERVED6, /* 0x3b */
|
|
RESERVED7, /* 0x3c */
|
|
RESERVED8, /* 0x3d */
|
|
RESERVED9, /* 0x3e */
|
|
TRANS_RX_R_ERR, /* 0x3f */
|
|
|
|
/* dma tx */
|
|
DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x40 */
|
|
DMA_TX_DIF_APP_ERR, /* 0x41 */
|
|
DMA_TX_DIF_RPP_ERR, /* 0x42 */
|
|
DMA_TX_DATA_SGL_OVERFLOW, /* 0x43 */
|
|
DMA_TX_DIF_SGL_OVERFLOW, /* 0x44 */
|
|
DMA_TX_UNEXP_XFER_ERR, /* 0x45 */
|
|
DMA_TX_UNEXP_RETRANS_ERR, /* 0x46 */
|
|
DMA_TX_XFER_LEN_OVERFLOW, /* 0x47 */
|
|
DMA_TX_XFER_OFFSET_ERR, /* 0x48 */
|
|
DMA_TX_RAM_ECC_ERR, /* 0x49 */
|
|
DMA_TX_DIF_LEN_ALIGN_ERR, /* 0x4a */
|
|
DMA_TX_MAX_ERR_CODE,
|
|
|
|
/* sipc rx */
|
|
SIPC_RX_FIS_STATUS_ERR_BIT_VLD = SIPC_RX_ERR_BASE, /* 0x50 */
|
|
SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR, /* 0x51 */
|
|
SIPC_RX_FIS_STATUS_BSY_BIT_ERR, /* 0x52 */
|
|
SIPC_RX_WRSETUP_LEN_ODD_ERR, /* 0x53 */
|
|
SIPC_RX_WRSETUP_LEN_ZERO_ERR, /* 0x54 */
|
|
SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR, /* 0x55 */
|
|
SIPC_RX_NCQ_WRSETUP_OFFSET_ERR, /* 0x56 */
|
|
SIPC_RX_NCQ_WRSETUP_AUTO_ACTIVE_ERR, /* 0x57 */
|
|
SIPC_RX_SATA_UNEXP_FIS_ERR, /* 0x58 */
|
|
SIPC_RX_WRSETUP_ESTATUS_ERR, /* 0x59 */
|
|
SIPC_RX_DATA_UNDERFLOW_ERR, /* 0x5a */
|
|
SIPC_RX_MAX_ERR_CODE,
|
|
|
|
/* dma rx */
|
|
DMA_RX_DIF_CRC_ERR = DMA_RX_ERR_BASE, /* 0x60 */
|
|
DMA_RX_DIF_APP_ERR, /* 0x61 */
|
|
DMA_RX_DIF_RPP_ERR, /* 0x62 */
|
|
DMA_RX_DATA_SGL_OVERFLOW, /* 0x63 */
|
|
DMA_RX_DIF_SGL_OVERFLOW, /* 0x64 */
|
|
DMA_RX_DATA_LEN_OVERFLOW, /* 0x65 */
|
|
DMA_RX_DATA_LEN_UNDERFLOW, /* 0x66 */
|
|
DMA_RX_DATA_OFFSET_ERR, /* 0x67 */
|
|
RESERVED10, /* 0x68 */
|
|
DMA_RX_SATA_FRAME_TYPE_ERR, /* 0x69 */
|
|
DMA_RX_RESP_BUF_OVERFLOW, /* 0x6a */
|
|
DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x6b */
|
|
DMA_RX_UNEXP_NORM_RESP_ERR, /* 0x6c */
|
|
DMA_RX_UNEXP_RDFRAME_ERR, /* 0x6d */
|
|
DMA_RX_PIO_DATA_LEN_ERR, /* 0x6e */
|
|
DMA_RX_RDSETUP_STATUS_ERR, /* 0x6f */
|
|
DMA_RX_RDSETUP_STATUS_DRQ_ERR, /* 0x70 */
|
|
DMA_RX_RDSETUP_STATUS_BSY_ERR, /* 0x71 */
|
|
DMA_RX_RDSETUP_LEN_ODD_ERR, /* 0x72 */
|
|
DMA_RX_RDSETUP_LEN_ZERO_ERR, /* 0x73 */
|
|
DMA_RX_RDSETUP_LEN_OVER_ERR, /* 0x74 */
|
|
DMA_RX_RDSETUP_OFFSET_ERR, /* 0x75 */
|
|
DMA_RX_RDSETUP_ACTIVE_ERR, /* 0x76 */
|
|
DMA_RX_RDSETUP_ESTATUS_ERR, /* 0x77 */
|
|
DMA_RX_RAM_ECC_ERR, /* 0x78 */
|
|
DMA_RX_UNKNOWN_FRM_ERR, /* 0x79 */
|
|
DMA_RX_MAX_ERR_CODE,
|
|
};
|
|
|
|
#define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096
|
|
#define HISI_MAX_SATA_SUPPORT_V2_HW (HISI_SAS_COMMAND_ENTRIES_V2_HW/64 - 1)
|
|
|
|
#define DIR_NO_DATA 0
|
|
#define DIR_TO_INI 1
|
|
#define DIR_TO_DEVICE 2
|
|
#define DIR_RESERVED 3
|
|
|
|
#define ERR_ON_TX_PHASE(err_phase) (err_phase == 0x2 || \
|
|
err_phase == 0x4 || err_phase == 0x8 ||\
|
|
err_phase == 0x6 || err_phase == 0xa)
|
|
#define ERR_ON_RX_PHASE(err_phase) (err_phase == 0x10 || \
|
|
err_phase == 0x20 || err_phase == 0x40)
|
|
|
|
static void link_timeout_disable_link(struct timer_list *t);
|
|
|
|
static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
return readl_relaxed(regs);
|
|
}
|
|
|
|
static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no,
|
|
u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
|
|
int phy_no, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
/* This function needs to be protected from pre-emption. */
|
|
static int
|
|
slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct domain_device *device)
|
|
{
|
|
int sata_dev = dev_is_sata(device);
|
|
void *bitmap = hisi_hba->slot_index_tags;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
int sata_idx = sas_dev->sata_idx;
|
|
int start, end;
|
|
|
|
if (!sata_dev) {
|
|
/*
|
|
* STP link SoC bug workaround: index starts from 1.
|
|
* additionally, we can only allocate odd IPTT(1~4095)
|
|
* for SAS/SMP device.
|
|
*/
|
|
start = 1;
|
|
end = hisi_hba->slot_index_count;
|
|
} else {
|
|
if (sata_idx >= HISI_MAX_SATA_SUPPORT_V2_HW)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* For SATA device: allocate even IPTT in this interval
|
|
* [64*(sata_idx+1), 64*(sata_idx+2)], then each SATA device
|
|
* own 32 IPTTs. IPTT 0 shall not be used duing to STP link
|
|
* SoC bug workaround. So we ignore the first 32 even IPTTs.
|
|
*/
|
|
start = 64 * (sata_idx + 1);
|
|
end = 64 * (sata_idx + 2);
|
|
}
|
|
|
|
spin_lock(&hisi_hba->lock);
|
|
while (1) {
|
|
start = find_next_zero_bit(bitmap,
|
|
hisi_hba->slot_index_count, start);
|
|
if (start >= end) {
|
|
spin_unlock(&hisi_hba->lock);
|
|
return -SAS_QUEUE_FULL;
|
|
}
|
|
/*
|
|
* SAS IPTT bit0 should be 1, and SATA IPTT bit0 should be 0.
|
|
*/
|
|
if (sata_dev ^ (start & 1))
|
|
break;
|
|
start++;
|
|
}
|
|
|
|
set_bit(start, bitmap);
|
|
spin_unlock(&hisi_hba->lock);
|
|
return start;
|
|
}
|
|
|
|
static bool sata_index_alloc_v2_hw(struct hisi_hba *hisi_hba, int *idx)
|
|
{
|
|
unsigned int index;
|
|
struct device *dev = hisi_hba->dev;
|
|
void *bitmap = hisi_hba->sata_dev_bitmap;
|
|
|
|
index = find_first_zero_bit(bitmap, HISI_MAX_SATA_SUPPORT_V2_HW);
|
|
if (index >= HISI_MAX_SATA_SUPPORT_V2_HW) {
|
|
dev_warn(dev, "alloc sata index failed, index=%d\n", index);
|
|
return false;
|
|
}
|
|
|
|
set_bit(index, bitmap);
|
|
*idx = index;
|
|
return true;
|
|
}
|
|
|
|
|
|
static struct
|
|
hisi_sas_device *alloc_dev_quirk_v2_hw(struct domain_device *device)
|
|
{
|
|
struct hisi_hba *hisi_hba = device->port->ha->lldd_ha;
|
|
struct hisi_sas_device *sas_dev = NULL;
|
|
int i, sata_dev = dev_is_sata(device);
|
|
int sata_idx = -1;
|
|
|
|
spin_lock(&hisi_hba->lock);
|
|
|
|
if (sata_dev)
|
|
if (!sata_index_alloc_v2_hw(hisi_hba, &sata_idx))
|
|
goto out;
|
|
|
|
for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
|
|
/*
|
|
* SATA device id bit0 should be 0
|
|
*/
|
|
if (sata_dev && (i & 1))
|
|
continue;
|
|
if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
|
|
int queue = i % hisi_hba->queue_count;
|
|
struct hisi_sas_dq *dq = &hisi_hba->dq[queue];
|
|
|
|
hisi_hba->devices[i].device_id = i;
|
|
sas_dev = &hisi_hba->devices[i];
|
|
sas_dev->dev_status = HISI_SAS_DEV_INIT;
|
|
sas_dev->dev_type = device->dev_type;
|
|
sas_dev->hisi_hba = hisi_hba;
|
|
sas_dev->sas_device = device;
|
|
sas_dev->sata_idx = sata_idx;
|
|
sas_dev->dq = dq;
|
|
spin_lock_init(&sas_dev->lock);
|
|
INIT_LIST_HEAD(&hisi_hba->devices[i].list);
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
spin_unlock(&hisi_hba->lock);
|
|
|
|
return sas_dev;
|
|
}
|
|
|
|
static void config_phy_opt_mode_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg &= ~PHY_CFG_DC_OPT_MSK;
|
|
cfg |= 1 << PHY_CFG_DC_OPT_OFF;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void config_id_frame_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct sas_identify_frame identify_frame;
|
|
u32 *identify_buffer;
|
|
|
|
memset(&identify_frame, 0, sizeof(identify_frame));
|
|
identify_frame.dev_type = SAS_END_DEVICE;
|
|
identify_frame.frame_type = 0;
|
|
identify_frame._un1 = 1;
|
|
identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
|
|
identify_frame.target_bits = SAS_PROTOCOL_NONE;
|
|
memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
identify_frame.phy_id = phy_no;
|
|
identify_buffer = (u32 *)(&identify_frame);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
|
|
__swab32(identify_buffer[0]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
|
|
__swab32(identify_buffer[1]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
|
|
__swab32(identify_buffer[2]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
|
|
__swab32(identify_buffer[3]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
|
|
__swab32(identify_buffer[4]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
|
|
__swab32(identify_buffer[5]));
|
|
}
|
|
|
|
static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
struct domain_device *device = sas_dev->sas_device;
|
|
struct device *dev = hisi_hba->dev;
|
|
u64 qw0, device_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
|
|
struct domain_device *parent_dev = device->parent;
|
|
struct asd_sas_port *sas_port = device->port;
|
|
struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
|
|
u64 sas_addr;
|
|
|
|
memset(itct, 0, sizeof(*itct));
|
|
|
|
/* qw0 */
|
|
qw0 = 0;
|
|
switch (sas_dev->dev_type) {
|
|
case SAS_END_DEVICE:
|
|
case SAS_EDGE_EXPANDER_DEVICE:
|
|
case SAS_FANOUT_EXPANDER_DEVICE:
|
|
qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
|
|
break;
|
|
case SAS_SATA_DEV:
|
|
case SAS_SATA_PENDING:
|
|
if (parent_dev && dev_is_expander(parent_dev->dev_type))
|
|
qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
|
|
else
|
|
qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
|
|
sas_dev->dev_type);
|
|
}
|
|
|
|
qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
|
|
(device->linkrate << ITCT_HDR_MCR_OFF) |
|
|
(1 << ITCT_HDR_VLN_OFF) |
|
|
(ITCT_HDR_SMP_TIMEOUT << ITCT_HDR_SMP_TIMEOUT_OFF) |
|
|
(1 << ITCT_HDR_AWT_CONTINUE_OFF) |
|
|
(port->id << ITCT_HDR_PORT_ID_OFF));
|
|
itct->qw0 = cpu_to_le64(qw0);
|
|
|
|
/* qw1 */
|
|
memcpy(&sas_addr, device->sas_addr, SAS_ADDR_SIZE);
|
|
itct->sas_addr = cpu_to_le64(__swab64(sas_addr));
|
|
|
|
/* qw2 */
|
|
if (!dev_is_sata(device))
|
|
itct->qw2 = cpu_to_le64((5000ULL << ITCT_HDR_INLT_OFF) |
|
|
(0x1ULL << ITCT_HDR_BITLT_OFF) |
|
|
(0x32ULL << ITCT_HDR_MCTLT_OFF) |
|
|
(0x1ULL << ITCT_HDR_RTOLT_OFF));
|
|
}
|
|
|
|
static int clear_itct_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
DECLARE_COMPLETION_ONSTACK(completion);
|
|
u64 dev_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
|
|
u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
|
|
struct device *dev = hisi_hba->dev;
|
|
int i;
|
|
|
|
sas_dev->completion = &completion;
|
|
|
|
/* clear the itct interrupt state */
|
|
if (ENT_INT_SRC3_ITC_INT_MSK & reg_val)
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
|
|
ENT_INT_SRC3_ITC_INT_MSK);
|
|
|
|
/* need to set register twice to clear ITCT for v2 hw */
|
|
for (i = 0; i < 2; i++) {
|
|
reg_val = ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
|
|
hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
|
|
if (!wait_for_completion_timeout(sas_dev->completion,
|
|
HISI_SAS_CLEAR_ITCT_TIMEOUT)) {
|
|
dev_warn(dev, "failed to clear ITCT\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
memset(itct, 0, sizeof(struct hisi_sas_itct));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void free_device_v2_hw(struct hisi_sas_device *sas_dev)
|
|
{
|
|
struct hisi_hba *hisi_hba = sas_dev->hisi_hba;
|
|
|
|
/* SoC bug workaround */
|
|
if (dev_is_sata(sas_dev->sas_device))
|
|
clear_bit(sas_dev->sata_idx, hisi_hba->sata_dev_bitmap);
|
|
}
|
|
|
|
static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i, reset_val;
|
|
u32 val;
|
|
unsigned long end_time;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
/* The mask needs to be set depending on the number of phys */
|
|
if (hisi_hba->n_phy == 9)
|
|
reset_val = 0x1fffff;
|
|
else
|
|
reset_val = 0x7ffff;
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
|
|
|
|
/* Disable all of the PHYs */
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
u32 phy_cfg = hisi_sas_phy_read32(hisi_hba, i, PHY_CFG);
|
|
|
|
phy_cfg &= ~PHY_CTRL_RESET_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CFG, phy_cfg);
|
|
}
|
|
udelay(50);
|
|
|
|
/* Ensure DMA tx & rx idle */
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
u32 dma_tx_status, dma_rx_status;
|
|
|
|
end_time = jiffies + msecs_to_jiffies(1000);
|
|
|
|
while (1) {
|
|
dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
|
|
DMA_TX_STATUS);
|
|
dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
|
|
DMA_RX_STATUS);
|
|
|
|
if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
|
|
!(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
|
|
break;
|
|
|
|
msleep(20);
|
|
if (time_after(jiffies, end_time))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Ensure axi bus idle */
|
|
end_time = jiffies + msecs_to_jiffies(1000);
|
|
while (1) {
|
|
u32 axi_status =
|
|
hisi_sas_read32(hisi_hba, AXI_CFG);
|
|
|
|
if (axi_status == 0)
|
|
break;
|
|
|
|
msleep(20);
|
|
if (time_after(jiffies, end_time))
|
|
return -EIO;
|
|
}
|
|
|
|
if (ACPI_HANDLE(dev)) {
|
|
acpi_status s;
|
|
|
|
s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
|
|
if (ACPI_FAILURE(s)) {
|
|
dev_err(dev, "Reset failed\n");
|
|
return -EIO;
|
|
}
|
|
} else if (hisi_hba->ctrl) {
|
|
/* reset and disable clock*/
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
|
|
reset_val);
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
|
|
reset_val);
|
|
msleep(1);
|
|
regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
|
|
if (reset_val != (val & reset_val)) {
|
|
dev_err(dev, "SAS reset fail.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* De-reset and enable clock*/
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
|
|
reset_val);
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
|
|
reset_val);
|
|
msleep(1);
|
|
regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg,
|
|
&val);
|
|
if (val & reset_val) {
|
|
dev_err(dev, "SAS de-reset fail.\n");
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
dev_err(dev, "no reset method\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function needs to be called after resetting SAS controller. */
|
|
static void phys_reject_stp_links_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
u32 cfg;
|
|
int phy_no;
|
|
|
|
hisi_hba->reject_stp_links_msk = (1 << hisi_hba->n_phy) - 1;
|
|
for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
|
|
cfg = hisi_sas_phy_read32(hisi_hba, phy_no, CON_CONTROL);
|
|
if (!(cfg & CON_CONTROL_CFG_OPEN_ACC_STP_MSK))
|
|
continue;
|
|
|
|
cfg &= ~CON_CONTROL_CFG_OPEN_ACC_STP_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CON_CONTROL, cfg);
|
|
}
|
|
}
|
|
|
|
static void phys_try_accept_stp_links_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int phy_no;
|
|
u32 dma_tx_dfx1;
|
|
|
|
for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
|
|
if (!(hisi_hba->reject_stp_links_msk & BIT(phy_no)))
|
|
continue;
|
|
|
|
dma_tx_dfx1 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
DMA_TX_DFX1);
|
|
if (dma_tx_dfx1 & DMA_TX_DFX1_IPTT_MSK) {
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba,
|
|
phy_no, CON_CONTROL);
|
|
|
|
cfg |= CON_CONTROL_CFG_OPEN_ACC_STP_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CON_CONTROL, cfg);
|
|
clear_bit(phy_no, &hisi_hba->reject_stp_links_msk);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const struct signal_attenuation_s x6000 = {9200, 0, 10476};
|
|
static const struct sig_atten_lu_s sig_atten_lu[] = {
|
|
{ &x6000, 0x3016a68 },
|
|
};
|
|
|
|
static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 sas_phy_ctrl = 0x30b9908;
|
|
u32 signal[3];
|
|
int i;
|
|
|
|
/* Global registers init */
|
|
|
|
/* Deal with am-max-transmissions quirk */
|
|
if (device_property_present(dev, "hip06-sas-v2-quirk-amt")) {
|
|
hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020);
|
|
hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS,
|
|
0x2020);
|
|
} /* Else, use defaults -> do nothing */
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
|
|
(u32)((1ULL << hisi_hba->queue_count) - 1));
|
|
hisi_sas_write32(hisi_hba, AXI_USER1, 0xc0000000);
|
|
hisi_sas_write32(hisi_hba, AXI_USER2, 0x10000);
|
|
hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x0);
|
|
hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF);
|
|
hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4);
|
|
hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x32);
|
|
hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1);
|
|
hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x60);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x3);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0x0);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffe20fe);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfff00c30);
|
|
for (i = 0; i < hisi_hba->queue_count; i++)
|
|
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0);
|
|
|
|
hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1);
|
|
hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
|
|
|
|
/* Get sas_phy_ctrl value to deal with TX FFE issue. */
|
|
if (!device_property_read_u32_array(dev, "hisilicon,signal-attenuation",
|
|
signal, ARRAY_SIZE(signal))) {
|
|
for (i = 0; i < ARRAY_SIZE(sig_atten_lu); i++) {
|
|
const struct sig_atten_lu_s *lookup = &sig_atten_lu[i];
|
|
const struct signal_attenuation_s *att = lookup->att;
|
|
|
|
if ((signal[0] == att->de_emphasis) &&
|
|
(signal[1] == att->preshoot) &&
|
|
(signal[2] == att->boost)) {
|
|
sas_phy_ctrl = lookup->sas_phy_ctrl;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(sig_atten_lu))
|
|
dev_warn(dev, "unknown signal attenuation values, using default PHY ctrl config\n");
|
|
}
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
u32 prog_phy_link_rate = 0x800;
|
|
|
|
if (!sas_phy->phy || (sas_phy->phy->maximum_linkrate <
|
|
SAS_LINK_RATE_1_5_GBPS)) {
|
|
prog_phy_link_rate = 0x855;
|
|
} else {
|
|
enum sas_linkrate max = sas_phy->phy->maximum_linkrate;
|
|
|
|
prog_phy_link_rate =
|
|
hisi_sas_get_prog_phy_linkrate_mask(max) |
|
|
0x800;
|
|
}
|
|
hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE,
|
|
prog_phy_link_rate);
|
|
hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, sas_phy_ctrl);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_CONTROL, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, TXID_AUTO, 0x2);
|
|
hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x8);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xfff87fff);
|
|
hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xff857fff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbfe);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x13f801fc);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
|
|
if (hisi_hba->refclk_frequency_mhz == 66)
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694);
|
|
/* else, do nothing -> leave it how you found it */
|
|
}
|
|
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
/* Delivery queue */
|
|
hisi_sas_write32(hisi_hba,
|
|
DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
|
|
/* Completion queue */
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
}
|
|
|
|
/* itct */
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->itct_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->itct_dma));
|
|
|
|
/* iost */
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->iost_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->iost_dma));
|
|
|
|
/* breakpoint */
|
|
hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO,
|
|
lower_32_bits(hisi_hba->breakpoint_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI,
|
|
upper_32_bits(hisi_hba->breakpoint_dma));
|
|
|
|
/* SATA broken msg */
|
|
hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO,
|
|
lower_32_bits(hisi_hba->sata_breakpoint_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI,
|
|
upper_32_bits(hisi_hba->sata_breakpoint_dma));
|
|
|
|
/* SATA initial fis */
|
|
hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->initial_fis_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->initial_fis_dma));
|
|
}
|
|
|
|
static void link_timeout_enable_link(struct timer_list *t)
|
|
{
|
|
struct hisi_hba *hisi_hba = from_timer(hisi_hba, t, timer);
|
|
int i, reg_val;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
if (hisi_hba->reject_stp_links_msk & BIT(i))
|
|
continue;
|
|
|
|
reg_val = hisi_sas_phy_read32(hisi_hba, i, CON_CONTROL);
|
|
if (!(reg_val & BIT(0))) {
|
|
hisi_sas_phy_write32(hisi_hba, i,
|
|
CON_CONTROL, 0x7);
|
|
break;
|
|
}
|
|
}
|
|
|
|
hisi_hba->timer.function = link_timeout_disable_link;
|
|
mod_timer(&hisi_hba->timer, jiffies + msecs_to_jiffies(900));
|
|
}
|
|
|
|
static void link_timeout_disable_link(struct timer_list *t)
|
|
{
|
|
struct hisi_hba *hisi_hba = from_timer(hisi_hba, t, timer);
|
|
int i, reg_val;
|
|
|
|
reg_val = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
for (i = 0; i < hisi_hba->n_phy && reg_val; i++) {
|
|
if (hisi_hba->reject_stp_links_msk & BIT(i))
|
|
continue;
|
|
|
|
if (reg_val & BIT(i)) {
|
|
hisi_sas_phy_write32(hisi_hba, i,
|
|
CON_CONTROL, 0x6);
|
|
break;
|
|
}
|
|
}
|
|
|
|
hisi_hba->timer.function = link_timeout_enable_link;
|
|
mod_timer(&hisi_hba->timer, jiffies + msecs_to_jiffies(100));
|
|
}
|
|
|
|
static void set_link_timer_quirk(struct hisi_hba *hisi_hba)
|
|
{
|
|
hisi_hba->timer.function = link_timeout_disable_link;
|
|
hisi_hba->timer.expires = jiffies + msecs_to_jiffies(1000);
|
|
add_timer(&hisi_hba->timer);
|
|
}
|
|
|
|
static int hw_init_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int rc;
|
|
|
|
rc = reset_hw_v2_hw(hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
msleep(100);
|
|
init_reg_v2_hw(hisi_hba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void enable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg |= PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static bool is_sata_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 context;
|
|
|
|
context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
|
|
if (context & (1 << phy_no))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool tx_fifo_is_empty_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 dfx_val;
|
|
|
|
dfx_val = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX1);
|
|
|
|
if (dfx_val & BIT(16))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool axi_bus_is_idle_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
int i, max_loop = 1000;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 status, axi_status, dfx_val, dfx_tx_val;
|
|
|
|
for (i = 0; i < max_loop; i++) {
|
|
status = hisi_sas_read32_relaxed(hisi_hba,
|
|
AXI_MASTER_CFG_BASE + AM_CURR_TRANS_RETURN);
|
|
|
|
axi_status = hisi_sas_read32(hisi_hba, AXI_CFG);
|
|
dfx_val = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX1);
|
|
dfx_tx_val = hisi_sas_phy_read32(hisi_hba,
|
|
phy_no, DMA_TX_FIFO_DFX0);
|
|
|
|
if ((status == 0x3) && (axi_status == 0x0) &&
|
|
(dfx_val & BIT(20)) && (dfx_tx_val & BIT(10)))
|
|
return true;
|
|
udelay(10);
|
|
}
|
|
dev_err(dev, "bus is not idle phy%d, axi150:0x%x axi100:0x%x port204:0x%x port240:0x%x\n",
|
|
phy_no, status, axi_status,
|
|
dfx_val, dfx_tx_val);
|
|
return false;
|
|
}
|
|
|
|
static bool wait_io_done_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
int i, max_loop = 1000;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 status, tx_dfx0;
|
|
|
|
for (i = 0; i < max_loop; i++) {
|
|
status = hisi_sas_phy_read32(hisi_hba, phy_no, LINK_DFX2);
|
|
status = (status & 0x3fc0) >> 6;
|
|
|
|
if (status != 0x1)
|
|
return true;
|
|
|
|
tx_dfx0 = hisi_sas_phy_read32(hisi_hba, phy_no, DMA_TX_DFX0);
|
|
if ((tx_dfx0 & 0x1ff) == 0x2)
|
|
return true;
|
|
udelay(10);
|
|
}
|
|
dev_err(dev, "IO not done phy%d, port264:0x%x port200:0x%x\n",
|
|
phy_no, status, tx_dfx0);
|
|
return false;
|
|
}
|
|
|
|
static bool allowed_disable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
if (tx_fifo_is_empty_v2_hw(hisi_hba, phy_no))
|
|
return true;
|
|
|
|
if (!axi_bus_is_idle_v2_hw(hisi_hba, phy_no))
|
|
return false;
|
|
|
|
if (!wait_io_done_v2_hw(hisi_hba, phy_no))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
|
|
static void disable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg, axi_val, dfx0_val, txid_auto;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
/* Close axi bus. */
|
|
axi_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
|
|
AM_CTRL_GLOBAL);
|
|
axi_val |= 0x1;
|
|
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
|
|
AM_CTRL_GLOBAL, axi_val);
|
|
|
|
if (is_sata_phy_v2_hw(hisi_hba, phy_no)) {
|
|
if (allowed_disable_phy_v2_hw(hisi_hba, phy_no))
|
|
goto do_disable;
|
|
|
|
/* Reset host controller. */
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
return;
|
|
}
|
|
|
|
dfx0_val = hisi_sas_phy_read32(hisi_hba, phy_no, PORT_DFX0);
|
|
dfx0_val = (dfx0_val & 0x1fc0) >> 6;
|
|
if (dfx0_val != 0x4)
|
|
goto do_disable;
|
|
|
|
if (!tx_fifo_is_empty_v2_hw(hisi_hba, phy_no)) {
|
|
dev_warn(dev, "phy%d, wait tx fifo need send break\n",
|
|
phy_no);
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
TXID_AUTO);
|
|
txid_auto |= TXID_AUTO_CTB_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto);
|
|
}
|
|
|
|
do_disable:
|
|
cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
cfg &= ~PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
|
|
/* Open axi bus. */
|
|
axi_val &= ~0x1;
|
|
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
|
|
AM_CTRL_GLOBAL, axi_val);
|
|
}
|
|
|
|
static void start_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
config_id_frame_v2_hw(hisi_hba, phy_no);
|
|
config_phy_opt_mode_v2_hw(hisi_hba, phy_no);
|
|
enable_phy_v2_hw(hisi_hba, phy_no);
|
|
}
|
|
|
|
static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
u32 txid_auto;
|
|
|
|
hisi_sas_phy_enable(hisi_hba, phy_no, 0);
|
|
if (phy->identify.device_type == SAS_END_DEVICE) {
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto | TX_HARDRST_MSK);
|
|
}
|
|
msleep(100);
|
|
hisi_sas_phy_enable(hisi_hba, phy_no, 1);
|
|
}
|
|
|
|
static void phy_get_events_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct sas_phy *sphy = sas_phy->phy;
|
|
u32 err4_reg_val, err6_reg_val;
|
|
|
|
/* loss dword syn, phy reset problem */
|
|
err4_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT4_REG);
|
|
|
|
/* disparity err, invalid dword */
|
|
err6_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT6_REG);
|
|
|
|
sphy->loss_of_dword_sync_count += (err4_reg_val >> 16) & 0xFFFF;
|
|
sphy->phy_reset_problem_count += err4_reg_val & 0xFFFF;
|
|
sphy->invalid_dword_count += (err6_reg_val & 0xFF0000) >> 16;
|
|
sphy->running_disparity_error_count += err6_reg_val & 0xFF;
|
|
}
|
|
|
|
static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
|
|
if (!sas_phy->phy->enabled)
|
|
continue;
|
|
|
|
hisi_sas_phy_enable(hisi_hba, i, 1);
|
|
}
|
|
}
|
|
|
|
static void sl_notify_ssp_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 sl_control;
|
|
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
msleep(1);
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
}
|
|
|
|
static enum sas_linkrate phy_get_max_linkrate_v2_hw(void)
|
|
{
|
|
return SAS_LINK_RATE_12_0_GBPS;
|
|
}
|
|
|
|
static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
|
|
struct sas_phy_linkrates *r)
|
|
{
|
|
enum sas_linkrate max = r->maximum_linkrate;
|
|
u32 prog_phy_link_rate = 0x800;
|
|
|
|
prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
|
|
prog_phy_link_rate);
|
|
}
|
|
|
|
static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
|
|
{
|
|
int i, bitmap = 0;
|
|
u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
|
|
for (i = 0; i < (hisi_hba->n_phy < 9 ? hisi_hba->n_phy : 8); i++)
|
|
if (phy_state & 1 << i)
|
|
if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
|
|
bitmap |= 1 << i;
|
|
|
|
if (hisi_hba->n_phy == 9) {
|
|
u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
|
|
|
|
if (phy_state & 1 << 8)
|
|
if (((port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
|
|
PORT_STATE_PHY8_PORT_NUM_OFF) == port_id)
|
|
bitmap |= 1 << 9;
|
|
}
|
|
|
|
return bitmap;
|
|
}
|
|
|
|
/* DQ lock must be taken here */
|
|
static void start_delivery_v2_hw(struct hisi_sas_dq *dq)
|
|
{
|
|
struct hisi_hba *hisi_hba = dq->hisi_hba;
|
|
struct hisi_sas_slot *s, *s1, *s2 = NULL;
|
|
int dlvry_queue = dq->id;
|
|
int wp;
|
|
|
|
list_for_each_entry_safe(s, s1, &dq->list, delivery) {
|
|
if (!s->ready)
|
|
break;
|
|
s2 = s;
|
|
list_del(&s->delivery);
|
|
}
|
|
|
|
if (!s2)
|
|
return;
|
|
|
|
/*
|
|
* Ensure that memories for slots built on other CPUs is observed.
|
|
*/
|
|
smp_rmb();
|
|
wp = (s2->dlvry_queue_slot + 1) % HISI_SAS_QUEUE_SLOTS;
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14), wp);
|
|
}
|
|
|
|
static void prep_prd_sge_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot,
|
|
struct hisi_sas_cmd_hdr *hdr,
|
|
struct scatterlist *scatter,
|
|
int n_elem)
|
|
{
|
|
struct hisi_sas_sge_page *sge_page = hisi_sas_sge_addr_mem(slot);
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
for_each_sg(scatter, sg, n_elem, i) {
|
|
struct hisi_sas_sge *entry = &sge_page->sge[i];
|
|
|
|
entry->addr = cpu_to_le64(sg_dma_address(sg));
|
|
entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
|
|
entry->data_len = cpu_to_le32(sg_dma_len(sg));
|
|
entry->data_off = 0;
|
|
}
|
|
|
|
hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
|
|
|
|
hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
|
|
}
|
|
|
|
static void prep_smp_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct scatterlist *sg_req;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
dma_addr_t req_dma_addr;
|
|
unsigned int req_len;
|
|
|
|
/* req */
|
|
sg_req = &task->smp_task.smp_req;
|
|
req_dma_addr = sg_dma_address(sg_req);
|
|
req_len = sg_dma_len(&task->smp_task.smp_req);
|
|
|
|
/* create header */
|
|
/* dw0 */
|
|
hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
|
|
(1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
|
|
(2 << CMD_HDR_CMD_OFF)); /* smp */
|
|
|
|
/* map itct entry */
|
|
hdr->dw1 = cpu_to_le32((sas_dev->device_id << CMD_HDR_DEV_ID_OFF) |
|
|
(1 << CMD_HDR_FRAME_TYPE_OFF) |
|
|
(DIR_NO_DATA << CMD_HDR_DIR_OFF));
|
|
|
|
/* dw2 */
|
|
hdr->dw2 = cpu_to_le32((((req_len - 4) / 4) << CMD_HDR_CFL_OFF) |
|
|
(HISI_SAS_MAX_SMP_RESP_SZ / 4 <<
|
|
CMD_HDR_MRFL_OFF));
|
|
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
|
|
|
|
hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
}
|
|
|
|
static void prep_ssp_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct sas_ssp_task *ssp_task = &task->ssp_task;
|
|
struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
|
|
struct sas_tmf_task *tmf = slot->tmf;
|
|
int has_data = 0, priority = !!tmf;
|
|
u8 *buf_cmd;
|
|
u32 dw1 = 0, dw2 = 0;
|
|
|
|
hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
|
|
(2 << CMD_HDR_TLR_CTRL_OFF) |
|
|
(port->id << CMD_HDR_PORT_OFF) |
|
|
(priority << CMD_HDR_PRIORITY_OFF) |
|
|
(1 << CMD_HDR_CMD_OFF)); /* ssp */
|
|
|
|
dw1 = 1 << CMD_HDR_VDTL_OFF;
|
|
if (tmf) {
|
|
dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
|
|
dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
|
|
} else {
|
|
dw1 |= 1 << CMD_HDR_FRAME_TYPE_OFF;
|
|
switch (scsi_cmnd->sc_data_direction) {
|
|
case DMA_TO_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
|
|
break;
|
|
default:
|
|
dw1 &= ~CMD_HDR_DIR_MSK;
|
|
}
|
|
}
|
|
|
|
/* map itct entry */
|
|
dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
|
|
hdr->dw1 = cpu_to_le32(dw1);
|
|
|
|
dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
|
|
+ 3) / 4) << CMD_HDR_CFL_OFF) |
|
|
((HISI_SAS_MAX_SSP_RESP_SZ / 4) << CMD_HDR_MRFL_OFF) |
|
|
(2 << CMD_HDR_SG_MOD_OFF);
|
|
hdr->dw2 = cpu_to_le32(dw2);
|
|
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
|
|
if (has_data)
|
|
prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter,
|
|
slot->n_elem);
|
|
|
|
hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
|
|
hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot) +
|
|
sizeof(struct ssp_frame_hdr);
|
|
|
|
memcpy(buf_cmd, &task->ssp_task.LUN, 8);
|
|
if (!tmf) {
|
|
buf_cmd[9] = task->ssp_task.task_attr |
|
|
(task->ssp_task.task_prio << 3);
|
|
memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
|
|
task->ssp_task.cmd->cmd_len);
|
|
} else {
|
|
buf_cmd[10] = tmf->tmf;
|
|
switch (tmf->tmf) {
|
|
case TMF_ABORT_TASK:
|
|
case TMF_QUERY_TASK:
|
|
buf_cmd[12] =
|
|
(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
|
|
buf_cmd[13] =
|
|
tmf->tag_of_task_to_be_managed & 0xff;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define TRANS_TX_ERR 0
|
|
#define TRANS_RX_ERR 1
|
|
#define DMA_TX_ERR 2
|
|
#define SIPC_RX_ERR 3
|
|
#define DMA_RX_ERR 4
|
|
|
|
#define DMA_TX_ERR_OFF 0
|
|
#define DMA_TX_ERR_MSK (0xffff << DMA_TX_ERR_OFF)
|
|
#define SIPC_RX_ERR_OFF 16
|
|
#define SIPC_RX_ERR_MSK (0xffff << SIPC_RX_ERR_OFF)
|
|
|
|
static int parse_trans_tx_err_code_v2_hw(u32 err_msk)
|
|
{
|
|
static const u8 trans_tx_err_code_prio[] = {
|
|
TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS,
|
|
TRANS_TX_ERR_PHY_NOT_ENABLE,
|
|
TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION,
|
|
TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION,
|
|
TRANS_TX_OPEN_CNX_ERR_BY_OTHER,
|
|
RESERVED0,
|
|
TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT,
|
|
TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY,
|
|
TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED,
|
|
TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED,
|
|
TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION,
|
|
TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD,
|
|
TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER,
|
|
TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED,
|
|
TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT,
|
|
TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION,
|
|
TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED,
|
|
TRANS_TX_ERR_WITH_CLOSE_PHYDISALE,
|
|
TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT,
|
|
TRANS_TX_ERR_WITH_CLOSE_COMINIT,
|
|
TRANS_TX_ERR_WITH_BREAK_TIMEOUT,
|
|
TRANS_TX_ERR_WITH_BREAK_REQUEST,
|
|
TRANS_TX_ERR_WITH_BREAK_RECEVIED,
|
|
TRANS_TX_ERR_WITH_CLOSE_TIMEOUT,
|
|
TRANS_TX_ERR_WITH_CLOSE_NORMAL,
|
|
TRANS_TX_ERR_WITH_NAK_RECEVIED,
|
|
TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT,
|
|
TRANS_TX_ERR_WITH_CREDIT_TIMEOUT,
|
|
TRANS_TX_ERR_WITH_IPTT_CONFLICT,
|
|
TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS,
|
|
TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT,
|
|
};
|
|
int index, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(trans_tx_err_code_prio); i++) {
|
|
index = trans_tx_err_code_prio[i] - TRANS_TX_FAIL_BASE;
|
|
if (err_msk & (1 << index))
|
|
return trans_tx_err_code_prio[i];
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int parse_trans_rx_err_code_v2_hw(u32 err_msk)
|
|
{
|
|
static const u8 trans_rx_err_code_prio[] = {
|
|
TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR,
|
|
TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR,
|
|
TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM,
|
|
TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR,
|
|
TRANS_RX_ERR_WITH_RXFIS_CRC_ERR,
|
|
TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN,
|
|
TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP,
|
|
TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN,
|
|
TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE,
|
|
TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT,
|
|
TRANS_RX_ERR_WITH_CLOSE_COMINIT,
|
|
TRANS_RX_ERR_WITH_BREAK_TIMEOUT,
|
|
TRANS_RX_ERR_WITH_BREAK_REQUEST,
|
|
TRANS_RX_ERR_WITH_BREAK_RECEVIED,
|
|
RESERVED1,
|
|
TRANS_RX_ERR_WITH_CLOSE_NORMAL,
|
|
TRANS_RX_ERR_WITH_DATA_LEN0,
|
|
TRANS_RX_ERR_WITH_BAD_HASH,
|
|
TRANS_RX_XRDY_WLEN_ZERO_ERR,
|
|
TRANS_RX_SSP_FRM_LEN_ERR,
|
|
RESERVED2,
|
|
RESERVED3,
|
|
RESERVED4,
|
|
RESERVED5,
|
|
TRANS_RX_ERR_WITH_BAD_FRM_TYPE,
|
|
TRANS_RX_SMP_FRM_LEN_ERR,
|
|
TRANS_RX_SMP_RESP_TIMEOUT_ERR,
|
|
RESERVED6,
|
|
RESERVED7,
|
|
RESERVED8,
|
|
RESERVED9,
|
|
TRANS_RX_R_ERR,
|
|
};
|
|
int index, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(trans_rx_err_code_prio); i++) {
|
|
index = trans_rx_err_code_prio[i] - TRANS_RX_FAIL_BASE;
|
|
if (err_msk & (1 << index))
|
|
return trans_rx_err_code_prio[i];
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int parse_dma_tx_err_code_v2_hw(u32 err_msk)
|
|
{
|
|
static const u8 dma_tx_err_code_prio[] = {
|
|
DMA_TX_UNEXP_XFER_ERR,
|
|
DMA_TX_UNEXP_RETRANS_ERR,
|
|
DMA_TX_XFER_LEN_OVERFLOW,
|
|
DMA_TX_XFER_OFFSET_ERR,
|
|
DMA_TX_RAM_ECC_ERR,
|
|
DMA_TX_DIF_LEN_ALIGN_ERR,
|
|
DMA_TX_DIF_CRC_ERR,
|
|
DMA_TX_DIF_APP_ERR,
|
|
DMA_TX_DIF_RPP_ERR,
|
|
DMA_TX_DATA_SGL_OVERFLOW,
|
|
DMA_TX_DIF_SGL_OVERFLOW,
|
|
};
|
|
int index, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dma_tx_err_code_prio); i++) {
|
|
index = dma_tx_err_code_prio[i] - DMA_TX_ERR_BASE;
|
|
err_msk = err_msk & DMA_TX_ERR_MSK;
|
|
if (err_msk & (1 << index))
|
|
return dma_tx_err_code_prio[i];
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int parse_sipc_rx_err_code_v2_hw(u32 err_msk)
|
|
{
|
|
static const u8 sipc_rx_err_code_prio[] = {
|
|
SIPC_RX_FIS_STATUS_ERR_BIT_VLD,
|
|
SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR,
|
|
SIPC_RX_FIS_STATUS_BSY_BIT_ERR,
|
|
SIPC_RX_WRSETUP_LEN_ODD_ERR,
|
|
SIPC_RX_WRSETUP_LEN_ZERO_ERR,
|
|
SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR,
|
|
SIPC_RX_NCQ_WRSETUP_OFFSET_ERR,
|
|
SIPC_RX_NCQ_WRSETUP_AUTO_ACTIVE_ERR,
|
|
SIPC_RX_SATA_UNEXP_FIS_ERR,
|
|
SIPC_RX_WRSETUP_ESTATUS_ERR,
|
|
SIPC_RX_DATA_UNDERFLOW_ERR,
|
|
};
|
|
int index, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sipc_rx_err_code_prio); i++) {
|
|
index = sipc_rx_err_code_prio[i] - SIPC_RX_ERR_BASE;
|
|
err_msk = err_msk & SIPC_RX_ERR_MSK;
|
|
if (err_msk & (1 << (index + 0x10)))
|
|
return sipc_rx_err_code_prio[i];
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int parse_dma_rx_err_code_v2_hw(u32 err_msk)
|
|
{
|
|
static const u8 dma_rx_err_code_prio[] = {
|
|
DMA_RX_UNKNOWN_FRM_ERR,
|
|
DMA_RX_DATA_LEN_OVERFLOW,
|
|
DMA_RX_DATA_LEN_UNDERFLOW,
|
|
DMA_RX_DATA_OFFSET_ERR,
|
|
RESERVED10,
|
|
DMA_RX_SATA_FRAME_TYPE_ERR,
|
|
DMA_RX_RESP_BUF_OVERFLOW,
|
|
DMA_RX_UNEXP_RETRANS_RESP_ERR,
|
|
DMA_RX_UNEXP_NORM_RESP_ERR,
|
|
DMA_RX_UNEXP_RDFRAME_ERR,
|
|
DMA_RX_PIO_DATA_LEN_ERR,
|
|
DMA_RX_RDSETUP_STATUS_ERR,
|
|
DMA_RX_RDSETUP_STATUS_DRQ_ERR,
|
|
DMA_RX_RDSETUP_STATUS_BSY_ERR,
|
|
DMA_RX_RDSETUP_LEN_ODD_ERR,
|
|
DMA_RX_RDSETUP_LEN_ZERO_ERR,
|
|
DMA_RX_RDSETUP_LEN_OVER_ERR,
|
|
DMA_RX_RDSETUP_OFFSET_ERR,
|
|
DMA_RX_RDSETUP_ACTIVE_ERR,
|
|
DMA_RX_RDSETUP_ESTATUS_ERR,
|
|
DMA_RX_RAM_ECC_ERR,
|
|
DMA_RX_DIF_CRC_ERR,
|
|
DMA_RX_DIF_APP_ERR,
|
|
DMA_RX_DIF_RPP_ERR,
|
|
DMA_RX_DATA_SGL_OVERFLOW,
|
|
DMA_RX_DIF_SGL_OVERFLOW,
|
|
};
|
|
int index, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dma_rx_err_code_prio); i++) {
|
|
index = dma_rx_err_code_prio[i] - DMA_RX_ERR_BASE;
|
|
if (err_msk & (1 << index))
|
|
return dma_rx_err_code_prio[i];
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* by default, task resp is complete */
|
|
static void slot_err_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct sas_task *task,
|
|
struct hisi_sas_slot *slot,
|
|
int err_phase)
|
|
{
|
|
struct task_status_struct *ts = &task->task_status;
|
|
struct hisi_sas_err_record_v2 *err_record =
|
|
hisi_sas_status_buf_addr_mem(slot);
|
|
u32 trans_tx_fail_type = le32_to_cpu(err_record->trans_tx_fail_type);
|
|
u32 trans_rx_fail_type = le32_to_cpu(err_record->trans_rx_fail_type);
|
|
u16 dma_tx_err_type = le16_to_cpu(err_record->dma_tx_err_type);
|
|
u16 sipc_rx_err_type = le16_to_cpu(err_record->sipc_rx_err_type);
|
|
u32 dma_rx_err_type = le32_to_cpu(err_record->dma_rx_err_type);
|
|
struct hisi_sas_complete_v2_hdr *complete_queue =
|
|
hisi_hba->complete_hdr[slot->cmplt_queue];
|
|
struct hisi_sas_complete_v2_hdr *complete_hdr =
|
|
&complete_queue[slot->cmplt_queue_slot];
|
|
u32 dw0 = le32_to_cpu(complete_hdr->dw0);
|
|
int error = -1;
|
|
|
|
if (err_phase == 1) {
|
|
/* error in TX phase, the priority of error is: DW2 > DW0 */
|
|
error = parse_dma_tx_err_code_v2_hw(dma_tx_err_type);
|
|
if (error == -1)
|
|
error = parse_trans_tx_err_code_v2_hw(
|
|
trans_tx_fail_type);
|
|
} else if (err_phase == 2) {
|
|
/* error in RX phase, the priority is: DW1 > DW3 > DW2 */
|
|
error = parse_trans_rx_err_code_v2_hw(trans_rx_fail_type);
|
|
if (error == -1) {
|
|
error = parse_dma_rx_err_code_v2_hw(
|
|
dma_rx_err_type);
|
|
if (error == -1)
|
|
error = parse_sipc_rx_err_code_v2_hw(
|
|
sipc_rx_err_type);
|
|
}
|
|
}
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP:
|
|
{
|
|
switch (error) {
|
|
case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_NO_DEST;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_EPROTO;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
|
|
break;
|
|
}
|
|
case DMA_RX_UNEXP_NORM_RESP_ERR:
|
|
case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION:
|
|
case DMA_RX_RESP_BUF_OVERFLOW:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER:
|
|
{
|
|
/* not sure */
|
|
ts->stat = SAS_DEV_NO_RESPONSE;
|
|
break;
|
|
}
|
|
case DMA_RX_DATA_LEN_OVERFLOW:
|
|
{
|
|
ts->stat = SAS_DATA_OVERRUN;
|
|
ts->residual = 0;
|
|
break;
|
|
}
|
|
case DMA_RX_DATA_LEN_UNDERFLOW:
|
|
{
|
|
ts->residual = trans_tx_fail_type;
|
|
ts->stat = SAS_DATA_UNDERRUN;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS:
|
|
case TRANS_TX_ERR_PHY_NOT_ENABLE:
|
|
case TRANS_TX_OPEN_CNX_ERR_BY_OTHER:
|
|
case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT:
|
|
case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD:
|
|
case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED:
|
|
case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT:
|
|
case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED:
|
|
case TRANS_TX_ERR_WITH_BREAK_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_BREAK_REQUEST:
|
|
case TRANS_TX_ERR_WITH_BREAK_RECEVIED:
|
|
case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CLOSE_NORMAL:
|
|
case TRANS_TX_ERR_WITH_CLOSE_PHYDISALE:
|
|
case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CLOSE_COMINIT:
|
|
case TRANS_TX_ERR_WITH_NAK_RECEVIED:
|
|
case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_IPTT_CONFLICT:
|
|
case TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR:
|
|
case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR:
|
|
case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM:
|
|
case TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN:
|
|
case TRANS_RX_ERR_WITH_BREAK_TIMEOUT:
|
|
case TRANS_RX_ERR_WITH_BREAK_REQUEST:
|
|
case TRANS_RX_ERR_WITH_BREAK_RECEVIED:
|
|
case TRANS_RX_ERR_WITH_CLOSE_NORMAL:
|
|
case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT:
|
|
case TRANS_RX_ERR_WITH_CLOSE_COMINIT:
|
|
case TRANS_TX_ERR_FRAME_TXED:
|
|
case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE:
|
|
case TRANS_RX_ERR_WITH_DATA_LEN0:
|
|
case TRANS_RX_ERR_WITH_BAD_HASH:
|
|
case TRANS_RX_XRDY_WLEN_ZERO_ERR:
|
|
case TRANS_RX_SSP_FRM_LEN_ERR:
|
|
case TRANS_RX_ERR_WITH_BAD_FRM_TYPE:
|
|
case DMA_TX_DATA_SGL_OVERFLOW:
|
|
case DMA_TX_UNEXP_XFER_ERR:
|
|
case DMA_TX_UNEXP_RETRANS_ERR:
|
|
case DMA_TX_XFER_LEN_OVERFLOW:
|
|
case DMA_TX_XFER_OFFSET_ERR:
|
|
case SIPC_RX_DATA_UNDERFLOW_ERR:
|
|
case DMA_RX_DATA_SGL_OVERFLOW:
|
|
case DMA_RX_DATA_OFFSET_ERR:
|
|
case DMA_RX_RDSETUP_LEN_ODD_ERR:
|
|
case DMA_RX_RDSETUP_LEN_ZERO_ERR:
|
|
case DMA_RX_RDSETUP_LEN_OVER_ERR:
|
|
case DMA_RX_SATA_FRAME_TYPE_ERR:
|
|
case DMA_RX_UNKNOWN_FRM_ERR:
|
|
{
|
|
/* This will request a retry */
|
|
ts->stat = SAS_QUEUE_FULL;
|
|
slot->abort = 1;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
case SAS_PROTOCOL_SMP:
|
|
ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
{
|
|
switch (error) {
|
|
case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_NO_DEST;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER:
|
|
{
|
|
ts->resp = SAS_TASK_UNDELIVERED;
|
|
ts->stat = SAS_DEV_NO_RESPONSE;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_EPROTO;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
|
|
break;
|
|
}
|
|
case DMA_RX_RESP_BUF_OVERFLOW:
|
|
case DMA_RX_UNEXP_NORM_RESP_ERR:
|
|
case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
|
|
break;
|
|
}
|
|
case DMA_RX_DATA_LEN_OVERFLOW:
|
|
{
|
|
ts->stat = SAS_DATA_OVERRUN;
|
|
ts->residual = 0;
|
|
break;
|
|
}
|
|
case DMA_RX_DATA_LEN_UNDERFLOW:
|
|
{
|
|
ts->residual = trans_tx_fail_type;
|
|
ts->stat = SAS_DATA_UNDERRUN;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS:
|
|
case TRANS_TX_ERR_PHY_NOT_ENABLE:
|
|
case TRANS_TX_OPEN_CNX_ERR_BY_OTHER:
|
|
case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT:
|
|
case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD:
|
|
case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED:
|
|
case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT:
|
|
case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED:
|
|
case TRANS_TX_ERR_WITH_BREAK_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_BREAK_REQUEST:
|
|
case TRANS_TX_ERR_WITH_BREAK_RECEVIED:
|
|
case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CLOSE_NORMAL:
|
|
case TRANS_TX_ERR_WITH_CLOSE_PHYDISALE:
|
|
case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CLOSE_COMINIT:
|
|
case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT:
|
|
case TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS:
|
|
case TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT:
|
|
case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM:
|
|
case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR:
|
|
case TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR:
|
|
case TRANS_RX_ERR_WITH_RXFIS_CRC_ERR:
|
|
case TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN:
|
|
case TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP:
|
|
case TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN:
|
|
case TRANS_RX_ERR_WITH_BREAK_TIMEOUT:
|
|
case TRANS_RX_ERR_WITH_BREAK_REQUEST:
|
|
case TRANS_RX_ERR_WITH_BREAK_RECEVIED:
|
|
case TRANS_RX_ERR_WITH_CLOSE_NORMAL:
|
|
case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE:
|
|
case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT:
|
|
case TRANS_RX_ERR_WITH_CLOSE_COMINIT:
|
|
case TRANS_RX_ERR_WITH_DATA_LEN0:
|
|
case TRANS_RX_ERR_WITH_BAD_HASH:
|
|
case TRANS_RX_XRDY_WLEN_ZERO_ERR:
|
|
case TRANS_RX_ERR_WITH_BAD_FRM_TYPE:
|
|
case DMA_TX_DATA_SGL_OVERFLOW:
|
|
case DMA_TX_UNEXP_XFER_ERR:
|
|
case DMA_TX_UNEXP_RETRANS_ERR:
|
|
case DMA_TX_XFER_LEN_OVERFLOW:
|
|
case DMA_TX_XFER_OFFSET_ERR:
|
|
case SIPC_RX_FIS_STATUS_ERR_BIT_VLD:
|
|
case SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR:
|
|
case SIPC_RX_FIS_STATUS_BSY_BIT_ERR:
|
|
case SIPC_RX_WRSETUP_LEN_ODD_ERR:
|
|
case SIPC_RX_WRSETUP_LEN_ZERO_ERR:
|
|
case SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR:
|
|
case SIPC_RX_SATA_UNEXP_FIS_ERR:
|
|
case DMA_RX_DATA_SGL_OVERFLOW:
|
|
case DMA_RX_DATA_OFFSET_ERR:
|
|
case DMA_RX_SATA_FRAME_TYPE_ERR:
|
|
case DMA_RX_UNEXP_RDFRAME_ERR:
|
|
case DMA_RX_PIO_DATA_LEN_ERR:
|
|
case DMA_RX_RDSETUP_STATUS_ERR:
|
|
case DMA_RX_RDSETUP_STATUS_DRQ_ERR:
|
|
case DMA_RX_RDSETUP_STATUS_BSY_ERR:
|
|
case DMA_RX_RDSETUP_LEN_ODD_ERR:
|
|
case DMA_RX_RDSETUP_LEN_ZERO_ERR:
|
|
case DMA_RX_RDSETUP_LEN_OVER_ERR:
|
|
case DMA_RX_RDSETUP_OFFSET_ERR:
|
|
case DMA_RX_RDSETUP_ACTIVE_ERR:
|
|
case DMA_RX_RDSETUP_ESTATUS_ERR:
|
|
case DMA_RX_UNKNOWN_FRM_ERR:
|
|
case TRANS_RX_SSP_FRM_LEN_ERR:
|
|
case TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY:
|
|
{
|
|
slot->abort = 1;
|
|
ts->stat = SAS_PHY_DOWN;
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
ts->stat = SAS_PROTO_RESPONSE;
|
|
break;
|
|
}
|
|
}
|
|
if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK)
|
|
hisi_sas_sata_done(task, slot);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void slot_complete_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_device *sas_dev;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct task_status_struct *ts;
|
|
struct domain_device *device;
|
|
struct sas_ha_struct *ha;
|
|
struct hisi_sas_complete_v2_hdr *complete_queue =
|
|
hisi_hba->complete_hdr[slot->cmplt_queue];
|
|
struct hisi_sas_complete_v2_hdr *complete_hdr =
|
|
&complete_queue[slot->cmplt_queue_slot];
|
|
unsigned long flags;
|
|
bool is_internal = slot->is_internal;
|
|
u32 dw0;
|
|
|
|
if (unlikely(!task || !task->lldd_task || !task->dev))
|
|
return;
|
|
|
|
ts = &task->task_status;
|
|
device = task->dev;
|
|
ha = device->port->ha;
|
|
sas_dev = device->lldd_dev;
|
|
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
|
|
memset(ts, 0, sizeof(*ts));
|
|
ts->resp = SAS_TASK_COMPLETE;
|
|
|
|
if (unlikely(!sas_dev)) {
|
|
dev_dbg(dev, "slot complete: port has no device\n");
|
|
ts->stat = SAS_PHY_DOWN;
|
|
goto out;
|
|
}
|
|
|
|
/* Use SAS+TMF status codes */
|
|
dw0 = le32_to_cpu(complete_hdr->dw0);
|
|
switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >>
|
|
CMPLT_HDR_ABORT_STAT_OFF) {
|
|
case STAT_IO_ABORTED:
|
|
/* this io has been aborted by abort command */
|
|
ts->stat = SAS_ABORTED_TASK;
|
|
goto out;
|
|
case STAT_IO_COMPLETE:
|
|
/* internal abort command complete */
|
|
ts->stat = TMF_RESP_FUNC_SUCC;
|
|
del_timer_sync(&slot->internal_abort_timer);
|
|
goto out;
|
|
case STAT_IO_NO_DEVICE:
|
|
ts->stat = TMF_RESP_FUNC_COMPLETE;
|
|
del_timer_sync(&slot->internal_abort_timer);
|
|
goto out;
|
|
case STAT_IO_NOT_VALID:
|
|
/* abort single io, controller don't find
|
|
* the io need to abort
|
|
*/
|
|
ts->stat = TMF_RESP_FUNC_FAILED;
|
|
del_timer_sync(&slot->internal_abort_timer);
|
|
goto out;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if ((dw0 & CMPLT_HDR_ERX_MSK) && (!(dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) {
|
|
u32 err_phase = (dw0 & CMPLT_HDR_ERR_PHASE_MSK)
|
|
>> CMPLT_HDR_ERR_PHASE_OFF;
|
|
u32 *error_info = hisi_sas_status_buf_addr_mem(slot);
|
|
|
|
/* Analyse error happens on which phase TX or RX */
|
|
if (ERR_ON_TX_PHASE(err_phase))
|
|
slot_err_v2_hw(hisi_hba, task, slot, 1);
|
|
else if (ERR_ON_RX_PHASE(err_phase))
|
|
slot_err_v2_hw(hisi_hba, task, slot, 2);
|
|
|
|
if (ts->stat != SAS_DATA_UNDERRUN)
|
|
dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n",
|
|
slot->idx, task, sas_dev->device_id,
|
|
complete_hdr->dw0, complete_hdr->dw1,
|
|
complete_hdr->act, complete_hdr->dw3,
|
|
error_info[0], error_info[1],
|
|
error_info[2], error_info[3]);
|
|
|
|
if (unlikely(slot->abort)) {
|
|
if (dev_is_sata(device) && task->ata_task.use_ncq)
|
|
sas_ata_device_link_abort(device, true);
|
|
else
|
|
sas_task_abort(task);
|
|
|
|
return;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP:
|
|
{
|
|
struct hisi_sas_status_buffer *status_buffer =
|
|
hisi_sas_status_buf_addr_mem(slot);
|
|
struct ssp_response_iu *iu = (struct ssp_response_iu *)
|
|
&status_buffer->iu[0];
|
|
|
|
sas_ssp_task_response(dev, task, iu);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SMP:
|
|
{
|
|
struct scatterlist *sg_resp = &task->smp_task.smp_resp;
|
|
void *to = page_address(sg_page(sg_resp));
|
|
|
|
ts->stat = SAS_SAM_STAT_GOOD;
|
|
|
|
memcpy(to + sg_resp->offset,
|
|
hisi_sas_status_buf_addr_mem(slot) +
|
|
sizeof(struct hisi_sas_err_record),
|
|
sg_resp->length);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
{
|
|
ts->stat = SAS_SAM_STAT_GOOD;
|
|
if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK)
|
|
hisi_sas_sata_done(task, slot);
|
|
break;
|
|
}
|
|
default:
|
|
ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
}
|
|
|
|
if (!slot->port->port_attached) {
|
|
dev_warn(dev, "slot complete: port %d has removed\n",
|
|
slot->port->sas_port.id);
|
|
ts->stat = SAS_PHY_DOWN;
|
|
}
|
|
|
|
out:
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
dev_info(dev, "slot complete: task(%pK) aborted\n", task);
|
|
return;
|
|
}
|
|
task->task_state_flags |= SAS_TASK_STATE_DONE;
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
hisi_sas_slot_task_free(hisi_hba, task, slot, true);
|
|
|
|
if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
|
|
spin_lock_irqsave(&device->done_lock, flags);
|
|
if (test_bit(SAS_HA_FROZEN, &ha->state)) {
|
|
spin_unlock_irqrestore(&device->done_lock, flags);
|
|
dev_info(dev, "slot complete: task(%pK) ignored\n",
|
|
task);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&device->done_lock, flags);
|
|
}
|
|
|
|
if (task->task_done)
|
|
task->task_done(task);
|
|
}
|
|
|
|
static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct domain_device *device = task->dev;
|
|
struct domain_device *parent_dev = device->parent;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct asd_sas_port *sas_port = device->port;
|
|
struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
|
|
struct sas_ata_task *ata_task = &task->ata_task;
|
|
struct sas_tmf_task *tmf = slot->tmf;
|
|
u8 *buf_cmd;
|
|
int has_data = 0, hdr_tag = 0;
|
|
u32 dw0, dw1 = 0, dw2 = 0;
|
|
|
|
/* create header */
|
|
/* dw0 */
|
|
dw0 = port->id << CMD_HDR_PORT_OFF;
|
|
if (parent_dev && dev_is_expander(parent_dev->dev_type))
|
|
dw0 |= 3 << CMD_HDR_CMD_OFF;
|
|
else
|
|
dw0 |= 4 << CMD_HDR_CMD_OFF;
|
|
|
|
if (tmf && ata_task->force_phy) {
|
|
dw0 |= CMD_HDR_FORCE_PHY_MSK;
|
|
dw0 |= (1 << ata_task->force_phy_id) << CMD_HDR_PHY_ID_OFF;
|
|
}
|
|
|
|
hdr->dw0 = cpu_to_le32(dw0);
|
|
|
|
/* dw1 */
|
|
switch (task->data_dir) {
|
|
case DMA_TO_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
has_data = 1;
|
|
dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF;
|
|
break;
|
|
default:
|
|
dw1 &= ~CMD_HDR_DIR_MSK;
|
|
}
|
|
|
|
if ((task->ata_task.fis.command == ATA_CMD_DEV_RESET) &&
|
|
(task->ata_task.fis.control & ATA_SRST))
|
|
dw1 |= 1 << CMD_HDR_RESET_OFF;
|
|
|
|
dw1 |= (hisi_sas_get_ata_protocol(
|
|
&task->ata_task.fis, task->data_dir))
|
|
<< CMD_HDR_FRAME_TYPE_OFF;
|
|
dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
|
|
hdr->dw1 = cpu_to_le32(dw1);
|
|
|
|
/* dw2 */
|
|
if (task->ata_task.use_ncq) {
|
|
struct ata_queued_cmd *qc = task->uldd_task;
|
|
|
|
hdr_tag = qc->tag;
|
|
task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
|
|
dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
|
|
}
|
|
|
|
dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF |
|
|
2 << CMD_HDR_SG_MOD_OFF;
|
|
hdr->dw2 = cpu_to_le32(dw2);
|
|
|
|
/* dw3 */
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
|
|
if (has_data)
|
|
prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter,
|
|
slot->n_elem);
|
|
|
|
hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
|
|
hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot);
|
|
|
|
if (likely(!task->ata_task.device_control_reg_update))
|
|
task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
|
|
/* fill in command FIS */
|
|
memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
|
|
}
|
|
|
|
static void hisi_sas_internal_abort_quirk_timeout(struct timer_list *t)
|
|
{
|
|
struct hisi_sas_slot *slot = from_timer(slot, t, internal_abort_timer);
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct asd_sas_port *asd_sas_port;
|
|
struct asd_sas_phy *sas_phy;
|
|
|
|
if (!port)
|
|
return;
|
|
|
|
asd_sas_port = &port->sas_port;
|
|
|
|
/* Kick the hardware - send break command */
|
|
list_for_each_entry(sas_phy, &asd_sas_port->phy_list, port_phy_el) {
|
|
struct hisi_sas_phy *phy = sas_phy->lldd_phy;
|
|
struct hisi_hba *hisi_hba = phy->hisi_hba;
|
|
int phy_no = sas_phy->id;
|
|
u32 link_dfx2;
|
|
|
|
link_dfx2 = hisi_sas_phy_read32(hisi_hba, phy_no, LINK_DFX2);
|
|
if ((link_dfx2 == LINK_DFX2_RCVR_HOLD_STS_MSK) ||
|
|
(link_dfx2 & LINK_DFX2_SEND_HOLD_STS_MSK)) {
|
|
u32 txid_auto;
|
|
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
TXID_AUTO);
|
|
txid_auto |= TXID_AUTO_CTB_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void prep_abort_v2_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct sas_internal_abort_task *abort = &task->abort_task;
|
|
struct domain_device *dev = task->dev;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct timer_list *timer = &slot->internal_abort_timer;
|
|
struct hisi_sas_device *sas_dev = dev->lldd_dev;
|
|
|
|
/* setup the quirk timer */
|
|
timer_setup(timer, hisi_sas_internal_abort_quirk_timeout, 0);
|
|
/* Set the timeout to 10ms less than internal abort timeout */
|
|
mod_timer(timer, jiffies + msecs_to_jiffies(100));
|
|
|
|
/* dw0 */
|
|
hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
|
|
(port->id << CMD_HDR_PORT_OFF) |
|
|
(dev_is_sata(dev) <<
|
|
CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
|
|
(abort->type << CMD_HDR_ABORT_FLAG_OFF));
|
|
|
|
/* dw1 */
|
|
hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEV_ID_OFF);
|
|
|
|
/* dw7 */
|
|
hdr->dw7 = cpu_to_le32(abort->tag << CMD_HDR_ABORT_IPTT_OFF);
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx);
|
|
}
|
|
|
|
static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
int i, res = IRQ_HANDLED;
|
|
u32 port_id, link_rate;
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
|
|
struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
|
|
|
|
if (is_sata_phy_v2_hw(hisi_hba, phy_no))
|
|
goto end;
|
|
|
|
del_timer(&phy->timer);
|
|
|
|
if (phy_no == 8) {
|
|
u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
|
|
|
|
port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
|
|
PORT_STATE_PHY8_PORT_NUM_OFF;
|
|
link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
|
|
PORT_STATE_PHY8_CONN_RATE_OFF;
|
|
} else {
|
|
port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
port_id = (port_id >> (4 * phy_no)) & 0xf;
|
|
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
|
|
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
|
|
}
|
|
|
|
if (port_id == 0xf) {
|
|
dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
RX_IDAF_DWORD0 + (i * 4));
|
|
frame_rcvd[i] = __swab32(idaf);
|
|
}
|
|
|
|
sas_phy->linkrate = link_rate;
|
|
sas_phy->oob_mode = SAS_OOB_MODE;
|
|
memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE);
|
|
dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
|
|
phy->port_id = port_id;
|
|
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
|
|
phy->phy_type |= PORT_TYPE_SAS;
|
|
phy->phy_attached = 1;
|
|
phy->identify.device_type = id->dev_type;
|
|
phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
|
|
if (phy->identify.device_type == SAS_END_DEVICE)
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SSP;
|
|
else if (phy->identify.device_type != SAS_PHY_UNUSED) {
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SMP;
|
|
if (!timer_pending(&hisi_hba->timer))
|
|
set_link_timer_quirk(hisi_hba);
|
|
}
|
|
hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
|
|
end:
|
|
if (phy->reset_completion)
|
|
complete(phy->reset_completion);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
|
|
CHL_INT0_SL_PHY_ENABLE_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0);
|
|
|
|
return res;
|
|
}
|
|
|
|
static bool check_any_wideports_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
u32 port_state;
|
|
|
|
port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
|
|
if (port_state & 0x1ff)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int phy_down_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
u32 phy_state, sl_ctrl, txid_auto;
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
struct hisi_sas_port *port = phy->port;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
del_timer(&phy->timer);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1);
|
|
|
|
phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
dev_info(dev, "phydown: phy%d phy_state=0x%x\n", phy_no, phy_state);
|
|
hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0,
|
|
GFP_ATOMIC);
|
|
|
|
sl_ctrl = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL,
|
|
sl_ctrl & ~SL_CONTROL_CTA_MSK);
|
|
if (port && !get_wideport_bitmap_v2_hw(hisi_hba, port->id))
|
|
if (!check_any_wideports_v2_hw(hisi_hba) &&
|
|
timer_pending(&hisi_hba->timer))
|
|
del_timer(&hisi_hba->timer);
|
|
|
|
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
|
|
txid_auto | TXID_AUTO_CT3_MSK);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
u32 irq_msk;
|
|
int phy_no = 0;
|
|
irqreturn_t res = IRQ_NONE;
|
|
|
|
irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO)
|
|
>> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff;
|
|
while (irq_msk) {
|
|
if (irq_msk & 1) {
|
|
u32 reg_value = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT0);
|
|
|
|
switch (reg_value & (CHL_INT0_NOT_RDY_MSK |
|
|
CHL_INT0_SL_PHY_ENABLE_MSK)) {
|
|
|
|
case CHL_INT0_SL_PHY_ENABLE_MSK:
|
|
/* phy up */
|
|
if (phy_up_v2_hw(phy_no, hisi_hba) ==
|
|
IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
break;
|
|
|
|
case CHL_INT0_NOT_RDY_MSK:
|
|
/* phy down */
|
|
if (phy_down_v2_hw(phy_no, hisi_hba) ==
|
|
IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
break;
|
|
|
|
case (CHL_INT0_NOT_RDY_MSK |
|
|
CHL_INT0_SL_PHY_ENABLE_MSK):
|
|
reg_value = hisi_sas_read32(hisi_hba,
|
|
PHY_STATE);
|
|
if (reg_value & BIT(phy_no)) {
|
|
/* phy up */
|
|
if (phy_up_v2_hw(phy_no, hisi_hba) ==
|
|
IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
} else {
|
|
/* phy down */
|
|
if (phy_down_v2_hw(phy_no, hisi_hba) ==
|
|
IRQ_HANDLED)
|
|
res = IRQ_HANDLED;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
irq_msk >>= 1;
|
|
phy_no++;
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
|
|
{
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
u32 bcast_status;
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
|
|
bcast_status = hisi_sas_phy_read32(hisi_hba, phy_no, RX_PRIMS_STATUS);
|
|
if (bcast_status & RX_BCAST_CHG_MSK)
|
|
hisi_sas_phy_bcast(phy);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
|
|
CHL_INT0_SL_RX_BCST_ACK_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
|
|
}
|
|
|
|
static const struct hisi_sas_hw_error port_ecc_axi_error[] = {
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_TX_ECC_ERR_OFF),
|
|
.msg = "dmac_tx_ecc_bad_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_RX_ECC_ERR_OFF),
|
|
.msg = "dmac_rx_ecc_bad_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_WR_ERR_OFF),
|
|
.msg = "dma_tx_axi_wr_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_TX_AXI_RD_ERR_OFF),
|
|
.msg = "dma_tx_axi_rd_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_WR_ERR_OFF),
|
|
.msg = "dma_rx_axi_wr_err",
|
|
},
|
|
{
|
|
.irq_msk = BIT(CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF),
|
|
.msg = "dma_rx_axi_rd_err",
|
|
},
|
|
};
|
|
|
|
static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 ent_msk, ent_tmp, irq_msk;
|
|
int phy_no = 0;
|
|
|
|
ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
|
|
ent_tmp = ent_msk;
|
|
ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK;
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk);
|
|
|
|
irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) >>
|
|
HGC_INVLD_DQE_INFO_FB_CH3_OFF) & 0x1ff;
|
|
|
|
while (irq_msk) {
|
|
u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT0);
|
|
u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT1);
|
|
u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
CHL_INT2);
|
|
|
|
if ((irq_msk & (1 << phy_no)) && irq_value1) {
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(port_ecc_axi_error); i++) {
|
|
const struct hisi_sas_hw_error *error =
|
|
&port_ecc_axi_error[i];
|
|
|
|
if (!(irq_value1 & error->irq_msk))
|
|
continue;
|
|
|
|
dev_warn(dev, "%s error (phy%d 0x%x) found!\n",
|
|
error->msg, phy_no, irq_value1);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT1, irq_value1);
|
|
}
|
|
|
|
if ((irq_msk & (1 << phy_no)) && irq_value2) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
|
|
if (irq_value2 & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
|
|
dev_warn(dev, "phy%d identify timeout\n",
|
|
phy_no);
|
|
hisi_sas_notify_phy_event(phy,
|
|
HISI_PHYE_LINK_RESET);
|
|
}
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT2, irq_value2);
|
|
}
|
|
|
|
if ((irq_msk & (1 << phy_no)) && irq_value0) {
|
|
if (irq_value0 & CHL_INT0_SL_RX_BCST_ACK_MSK)
|
|
phy_bcast_v2_hw(phy_no, hisi_hba);
|
|
|
|
if (irq_value0 & CHL_INT0_PHY_RDY_MSK)
|
|
hisi_sas_phy_oob_ready(hisi_hba, phy_no);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no,
|
|
CHL_INT0, irq_value0
|
|
& (~CHL_INT0_HOTPLUG_TOUT_MSK)
|
|
& (~CHL_INT0_SL_PHY_ENABLE_MSK)
|
|
& (~CHL_INT0_NOT_RDY_MSK));
|
|
}
|
|
irq_msk &= ~(1 << phy_no);
|
|
phy_no++;
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
one_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, u32 irq_value)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
const struct hisi_sas_hw_error *ecc_error;
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(one_bit_ecc_errors); i++) {
|
|
ecc_error = &one_bit_ecc_errors[i];
|
|
if (irq_value & ecc_error->irq_msk) {
|
|
val = hisi_sas_read32(hisi_hba, ecc_error->reg);
|
|
val &= ecc_error->msk;
|
|
val >>= ecc_error->shift;
|
|
dev_warn(dev, "%s found: mem addr is 0x%08X\n",
|
|
ecc_error->msg, val);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba,
|
|
u32 irq_value)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
const struct hisi_sas_hw_error *ecc_error;
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(multi_bit_ecc_errors); i++) {
|
|
ecc_error = &multi_bit_ecc_errors[i];
|
|
if (irq_value & ecc_error->irq_msk) {
|
|
val = hisi_sas_read32(hisi_hba, ecc_error->reg);
|
|
val &= ecc_error->msk;
|
|
val >>= ecc_error->shift;
|
|
dev_err(dev, "%s (0x%x) found: mem addr is 0x%08X\n",
|
|
ecc_error->msg, irq_value, val);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static irqreturn_t fatal_ecc_int_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
u32 irq_value, irq_msk;
|
|
|
|
irq_msk = hisi_sas_read32(hisi_hba, SAS_ECC_INTR_MSK);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk | 0xffffffff);
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
|
|
if (irq_value) {
|
|
one_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
|
|
multi_bit_ecc_error_process_v2_hw(hisi_hba, irq_value);
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR, irq_value);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct hisi_sas_hw_error axi_error[] = {
|
|
{ .msk = BIT(0), .msg = "IOST_AXI_W_ERR" },
|
|
{ .msk = BIT(1), .msg = "IOST_AXI_R_ERR" },
|
|
{ .msk = BIT(2), .msg = "ITCT_AXI_W_ERR" },
|
|
{ .msk = BIT(3), .msg = "ITCT_AXI_R_ERR" },
|
|
{ .msk = BIT(4), .msg = "SATA_AXI_W_ERR" },
|
|
{ .msk = BIT(5), .msg = "SATA_AXI_R_ERR" },
|
|
{ .msk = BIT(6), .msg = "DQE_AXI_R_ERR" },
|
|
{ .msk = BIT(7), .msg = "CQE_AXI_W_ERR" },
|
|
{}
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error fifo_error[] = {
|
|
{ .msk = BIT(8), .msg = "CQE_WINFO_FIFO" },
|
|
{ .msk = BIT(9), .msg = "CQE_MSG_FIFIO" },
|
|
{ .msk = BIT(10), .msg = "GETDQE_FIFO" },
|
|
{ .msk = BIT(11), .msg = "CMDP_FIFO" },
|
|
{ .msk = BIT(12), .msg = "AWTCTRL_FIFO" },
|
|
{}
|
|
};
|
|
|
|
static const struct hisi_sas_hw_error fatal_axi_errors[] = {
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_WP_DEPTH_OFF),
|
|
.msg = "write pointer and depth",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF),
|
|
.msg = "iptt no match slot",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_RP_DEPTH_OFF),
|
|
.msg = "read pointer and depth",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_AXI_OFF),
|
|
.reg = HGC_AXI_FIFO_ERR_INFO,
|
|
.sub = axi_error,
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_FIFO_OFF),
|
|
.reg = HGC_AXI_FIFO_ERR_INFO,
|
|
.sub = fifo_error,
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_LM_OFF),
|
|
.msg = "LM add/fetch list",
|
|
},
|
|
{
|
|
.irq_msk = BIT(ENT_INT_SRC3_ABT_OFF),
|
|
.msg = "SAS_HGC_ABT fetch LM list",
|
|
},
|
|
};
|
|
|
|
static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
u32 irq_value, irq_msk, err_value;
|
|
struct device *dev = hisi_hba->dev;
|
|
const struct hisi_sas_hw_error *axi_error;
|
|
int i;
|
|
|
|
irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0xfffffffe);
|
|
|
|
irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fatal_axi_errors); i++) {
|
|
axi_error = &fatal_axi_errors[i];
|
|
if (!(irq_value & axi_error->irq_msk))
|
|
continue;
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
|
|
1 << axi_error->shift);
|
|
if (axi_error->sub) {
|
|
const struct hisi_sas_hw_error *sub = axi_error->sub;
|
|
|
|
err_value = hisi_sas_read32(hisi_hba, axi_error->reg);
|
|
for (; sub->msk || sub->msg; sub++) {
|
|
if (!(err_value & sub->msk))
|
|
continue;
|
|
dev_err(dev, "%s (0x%x) found!\n",
|
|
sub->msg, irq_value);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
} else {
|
|
dev_err(dev, "%s (0x%x) found!\n",
|
|
axi_error->msg, irq_value);
|
|
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
|
|
}
|
|
}
|
|
|
|
if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
|
|
u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
|
|
u32 dev_id = reg_val & ITCT_DEV_MSK;
|
|
struct hisi_sas_device *sas_dev = &hisi_hba->devices[dev_id];
|
|
|
|
hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
|
|
dev_dbg(dev, "clear ITCT ok\n");
|
|
complete(sas_dev->completion);
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cq_thread_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_sas_cq *cq = p;
|
|
struct hisi_hba *hisi_hba = cq->hisi_hba;
|
|
struct hisi_sas_slot *slot;
|
|
struct hisi_sas_itct *itct;
|
|
struct hisi_sas_complete_v2_hdr *complete_queue;
|
|
u32 rd_point = cq->rd_point, wr_point, dev_id;
|
|
int queue = cq->id;
|
|
|
|
if (unlikely(hisi_hba->reject_stp_links_msk))
|
|
phys_try_accept_stp_links_v2_hw(hisi_hba);
|
|
|
|
complete_queue = hisi_hba->complete_hdr[queue];
|
|
|
|
wr_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_WR_PTR +
|
|
(0x14 * queue));
|
|
|
|
while (rd_point != wr_point) {
|
|
struct hisi_sas_complete_v2_hdr *complete_hdr;
|
|
int iptt;
|
|
|
|
complete_hdr = &complete_queue[rd_point];
|
|
|
|
/* Check for NCQ completion */
|
|
if (complete_hdr->act) {
|
|
u32 act_tmp = le32_to_cpu(complete_hdr->act);
|
|
int ncq_tag_count = ffs(act_tmp);
|
|
u32 dw1 = le32_to_cpu(complete_hdr->dw1);
|
|
|
|
dev_id = (dw1 & CMPLT_HDR_DEV_ID_MSK) >>
|
|
CMPLT_HDR_DEV_ID_OFF;
|
|
itct = &hisi_hba->itct[dev_id];
|
|
|
|
/* The NCQ tags are held in the itct header */
|
|
while (ncq_tag_count) {
|
|
__le64 *_ncq_tag = &itct->qw4_15[0], __ncq_tag;
|
|
u64 ncq_tag;
|
|
|
|
ncq_tag_count--;
|
|
__ncq_tag = _ncq_tag[ncq_tag_count / 5];
|
|
ncq_tag = le64_to_cpu(__ncq_tag);
|
|
iptt = (ncq_tag >> (ncq_tag_count % 5) * 12) &
|
|
0xfff;
|
|
|
|
slot = &hisi_hba->slot_info[iptt];
|
|
slot->cmplt_queue_slot = rd_point;
|
|
slot->cmplt_queue = queue;
|
|
slot_complete_v2_hw(hisi_hba, slot);
|
|
|
|
act_tmp &= ~(1 << ncq_tag_count);
|
|
ncq_tag_count = ffs(act_tmp);
|
|
}
|
|
} else {
|
|
u32 dw1 = le32_to_cpu(complete_hdr->dw1);
|
|
|
|
iptt = dw1 & CMPLT_HDR_IPTT_MSK;
|
|
slot = &hisi_hba->slot_info[iptt];
|
|
slot->cmplt_queue_slot = rd_point;
|
|
slot->cmplt_queue = queue;
|
|
slot_complete_v2_hw(hisi_hba, slot);
|
|
}
|
|
|
|
if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
|
|
rd_point = 0;
|
|
}
|
|
|
|
/* update rd_point */
|
|
cq->rd_point = rd_point;
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cq_interrupt_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_sas_cq *cq = p;
|
|
struct hisi_hba *hisi_hba = cq->hisi_hba;
|
|
int queue = cq->id;
|
|
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_sas_phy *phy = p;
|
|
struct hisi_hba *hisi_hba = phy->hisi_hba;
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct hisi_sas_initial_fis *initial_fis;
|
|
struct dev_to_host_fis *fis;
|
|
u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate;
|
|
irqreturn_t res = IRQ_HANDLED;
|
|
u8 attached_sas_addr[SAS_ADDR_SIZE] = {0};
|
|
int phy_no, offset;
|
|
|
|
del_timer(&phy->timer);
|
|
|
|
phy_no = sas_phy->id;
|
|
initial_fis = &hisi_hba->initial_fis[phy_no];
|
|
fis = &initial_fis->fis;
|
|
|
|
offset = 4 * (phy_no / 4);
|
|
ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1 + offset);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset,
|
|
ent_msk | 1 << ((phy_no % 4) * 8));
|
|
|
|
ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1 + offset);
|
|
ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF *
|
|
(phy_no % 4)));
|
|
ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4);
|
|
if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) {
|
|
dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
/* check ERR bit of Status Register */
|
|
if (fis->status & ATA_ERR) {
|
|
dev_warn(dev, "sata int: phy%d FIS status: 0x%x\n", phy_no,
|
|
fis->status);
|
|
hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
if (unlikely(phy_no == 8)) {
|
|
u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
|
|
|
|
port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
|
|
PORT_STATE_PHY8_PORT_NUM_OFF;
|
|
link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
|
|
PORT_STATE_PHY8_CONN_RATE_OFF;
|
|
} else {
|
|
port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
port_id = (port_id >> (4 * phy_no)) & 0xf;
|
|
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
|
|
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
|
|
}
|
|
|
|
if (port_id == 0xf) {
|
|
dev_err(dev, "sata int: phy%d invalid portid\n", phy_no);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
sas_phy->linkrate = link_rate;
|
|
hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
HARD_PHY_LINKRATE);
|
|
phy->maximum_linkrate = hard_phy_linkrate & 0xf;
|
|
phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
|
|
|
|
sas_phy->oob_mode = SATA_OOB_MODE;
|
|
/* Make up some unique SAS address */
|
|
attached_sas_addr[0] = 0x50;
|
|
attached_sas_addr[6] = hisi_hba->shost->host_no;
|
|
attached_sas_addr[7] = phy_no;
|
|
memcpy(sas_phy->attached_sas_addr, attached_sas_addr, SAS_ADDR_SIZE);
|
|
memcpy(sas_phy->frame_rcvd, fis, sizeof(struct dev_to_host_fis));
|
|
dev_info(dev, "sata int phyup: phy%d link_rate=%d\n", phy_no, link_rate);
|
|
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
|
|
phy->port_id = port_id;
|
|
phy->phy_type |= PORT_TYPE_SATA;
|
|
phy->phy_attached = 1;
|
|
phy->identify.device_type = SAS_SATA_DEV;
|
|
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
|
|
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
|
|
hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
|
|
|
|
if (phy->reset_completion)
|
|
complete(phy->reset_completion);
|
|
end:
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC1 + offset, ent_tmp);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1 + offset, ent_msk);
|
|
|
|
return res;
|
|
}
|
|
|
|
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
|
|
int_phy_updown_v2_hw,
|
|
int_chnl_int_v2_hw,
|
|
};
|
|
|
|
static irq_handler_t fatal_interrupts[HISI_SAS_FATAL_INT_NR] = {
|
|
fatal_ecc_int_v2_hw,
|
|
fatal_axi_int_v2_hw
|
|
};
|
|
|
|
#define CQ0_IRQ_INDEX (96)
|
|
|
|
static int hisi_sas_v2_interrupt_preinit(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct platform_device *pdev = hisi_hba->platform_dev;
|
|
struct Scsi_Host *shost = hisi_hba->shost;
|
|
struct irq_affinity desc = {
|
|
.pre_vectors = CQ0_IRQ_INDEX,
|
|
.post_vectors = 16,
|
|
};
|
|
int resv = desc.pre_vectors + desc.post_vectors, minvec = resv + 1, nvec;
|
|
|
|
nvec = devm_platform_get_irqs_affinity(pdev, &desc, minvec, 128,
|
|
&hisi_hba->irq_map);
|
|
if (nvec < 0)
|
|
return nvec;
|
|
|
|
shost->nr_hw_queues = hisi_hba->cq_nvecs = nvec - resv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* There is a limitation in the hip06 chipset that we need
|
|
* to map in all mbigen interrupts, even if they are not used.
|
|
*/
|
|
static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct platform_device *pdev = hisi_hba->platform_dev;
|
|
struct device *dev = &pdev->dev;
|
|
int irq, rc = 0;
|
|
int i, phy_no, fatal_no, queue_no;
|
|
|
|
for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) {
|
|
irq = hisi_hba->irq_map[i + 1]; /* Phy up/down is irq1 */
|
|
rc = devm_request_irq(dev, irq, phy_interrupts[i], 0,
|
|
DRV_NAME " phy", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request phy interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
rc = -ENOENT;
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
|
|
|
|
irq = hisi_hba->irq_map[phy_no + 72];
|
|
rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0,
|
|
DRV_NAME " sata", phy);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request sata interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
rc = -ENOENT;
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
for (fatal_no = 0; fatal_no < HISI_SAS_FATAL_INT_NR; fatal_no++) {
|
|
irq = hisi_hba->irq_map[fatal_no + 81];
|
|
rc = devm_request_irq(dev, irq, fatal_interrupts[fatal_no], 0,
|
|
DRV_NAME " fatal", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request fatal interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
rc = -ENOENT;
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
for (queue_no = 0; queue_no < hisi_hba->cq_nvecs; queue_no++) {
|
|
struct hisi_sas_cq *cq = &hisi_hba->cq[queue_no];
|
|
|
|
cq->irq_no = hisi_hba->irq_map[queue_no + 96];
|
|
rc = devm_request_threaded_irq(dev, cq->irq_no,
|
|
cq_interrupt_v2_hw,
|
|
cq_thread_v2_hw, IRQF_ONESHOT,
|
|
DRV_NAME " cq", cq);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
|
|
cq->irq_no, rc);
|
|
rc = -ENOENT;
|
|
goto err_out;
|
|
}
|
|
cq->irq_mask = irq_get_affinity_mask(cq->irq_no);
|
|
}
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
|
|
{
|
|
int rc;
|
|
|
|
memset(hisi_hba->sata_dev_bitmap, 0, sizeof(hisi_hba->sata_dev_bitmap));
|
|
|
|
rc = hw_init_v2_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = interrupt_init_v2_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void interrupt_disable_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct platform_device *pdev = hisi_hba->platform_dev;
|
|
int i;
|
|
|
|
for (i = 0; i < hisi_hba->queue_count; i++)
|
|
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xffffffff);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffffff);
|
|
}
|
|
|
|
for (i = 0; i < 128; i++)
|
|
synchronize_irq(platform_get_irq(pdev, i));
|
|
}
|
|
|
|
|
|
static u32 get_phys_state_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
return hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
}
|
|
|
|
static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int rc, cnt;
|
|
|
|
interrupt_disable_v2_hw(hisi_hba);
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
|
|
|
|
hisi_sas_stop_phys(hisi_hba);
|
|
|
|
mdelay(10);
|
|
|
|
hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
|
|
|
|
/* wait until bus idle */
|
|
cnt = 0;
|
|
while (1) {
|
|
u32 status = hisi_sas_read32_relaxed(hisi_hba,
|
|
AXI_MASTER_CFG_BASE + AM_CURR_TRANS_RETURN);
|
|
|
|
if (status == 0x3)
|
|
break;
|
|
|
|
udelay(10);
|
|
if (cnt++ > 10) {
|
|
dev_err(dev, "wait axi bus state to idle timeout!\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
hisi_sas_init_mem(hisi_hba);
|
|
|
|
rc = hw_init_v2_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
phys_reject_stp_links_v2_hw(hisi_hba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
|
|
u8 reg_index, u8 reg_count, u8 *write_data)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int phy_no, count;
|
|
|
|
if (!hisi_hba->sgpio_regs)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (reg_type) {
|
|
case SAS_GPIO_REG_TX:
|
|
count = reg_count * 4;
|
|
count = min(count, hisi_hba->n_phy);
|
|
|
|
for (phy_no = 0; phy_no < count; phy_no++) {
|
|
/*
|
|
* GPIO_TX[n] register has the highest numbered drive
|
|
* of the four in the first byte and the lowest
|
|
* numbered drive in the fourth byte.
|
|
* See SFF-8485 Rev. 0.7 Table 24.
|
|
*/
|
|
void __iomem *reg_addr = hisi_hba->sgpio_regs +
|
|
reg_index * 4 + phy_no;
|
|
int data_idx = phy_no + 3 - (phy_no % 4) * 2;
|
|
|
|
writeb(write_data[data_idx], reg_addr);
|
|
}
|
|
|
|
break;
|
|
default:
|
|
dev_err(dev, "write gpio: unsupported or bad reg type %d\n",
|
|
reg_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wait_cmds_complete_timeout_v2_hw(struct hisi_hba *hisi_hba,
|
|
int delay_ms, int timeout_ms)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int entries, entries_old = 0, time;
|
|
|
|
for (time = 0; time < timeout_ms; time += delay_ms) {
|
|
entries = hisi_sas_read32(hisi_hba, CQE_SEND_CNT);
|
|
if (entries == entries_old)
|
|
break;
|
|
|
|
entries_old = entries;
|
|
msleep(delay_ms);
|
|
}
|
|
|
|
if (time >= timeout_ms) {
|
|
dev_dbg(dev, "Wait commands complete timeout!\n");
|
|
return;
|
|
}
|
|
|
|
dev_dbg(dev, "wait commands complete %dms\n", time);
|
|
|
|
}
|
|
|
|
static struct attribute *host_v2_hw_attrs[] = {
|
|
&dev_attr_phy_event_threshold.attr,
|
|
NULL
|
|
};
|
|
|
|
ATTRIBUTE_GROUPS(host_v2_hw);
|
|
|
|
static void map_queues_v2_hw(struct Scsi_Host *shost)
|
|
{
|
|
struct hisi_hba *hisi_hba = shost_priv(shost);
|
|
struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
|
|
const struct cpumask *mask;
|
|
unsigned int queue, cpu;
|
|
|
|
for (queue = 0; queue < qmap->nr_queues; queue++) {
|
|
mask = irq_get_affinity_mask(hisi_hba->irq_map[96 + queue]);
|
|
if (!mask)
|
|
continue;
|
|
|
|
for_each_cpu(cpu, mask)
|
|
qmap->mq_map[cpu] = qmap->queue_offset + queue;
|
|
}
|
|
}
|
|
|
|
static const struct scsi_host_template sht_v2_hw = {
|
|
.name = DRV_NAME,
|
|
.proc_name = DRV_NAME,
|
|
.module = THIS_MODULE,
|
|
.queuecommand = sas_queuecommand,
|
|
.dma_need_drain = ata_scsi_dma_need_drain,
|
|
.target_alloc = sas_target_alloc,
|
|
.slave_configure = hisi_sas_slave_configure,
|
|
.scan_finished = hisi_sas_scan_finished,
|
|
.scan_start = hisi_sas_scan_start,
|
|
.change_queue_depth = sas_change_queue_depth,
|
|
.bios_param = sas_bios_param,
|
|
.this_id = -1,
|
|
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
|
|
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
|
|
.eh_device_reset_handler = sas_eh_device_reset_handler,
|
|
.eh_target_reset_handler = sas_eh_target_reset_handler,
|
|
.slave_alloc = hisi_sas_slave_alloc,
|
|
.target_destroy = sas_target_destroy,
|
|
.ioctl = sas_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = sas_ioctl,
|
|
#endif
|
|
.shost_groups = host_v2_hw_groups,
|
|
.host_reset = hisi_sas_host_reset,
|
|
.map_queues = map_queues_v2_hw,
|
|
.host_tagset = 1,
|
|
};
|
|
|
|
static const struct hisi_sas_hw hisi_sas_v2_hw = {
|
|
.hw_init = hisi_sas_v2_init,
|
|
.interrupt_preinit = hisi_sas_v2_interrupt_preinit,
|
|
.setup_itct = setup_itct_v2_hw,
|
|
.slot_index_alloc = slot_index_alloc_quirk_v2_hw,
|
|
.alloc_dev = alloc_dev_quirk_v2_hw,
|
|
.sl_notify_ssp = sl_notify_ssp_v2_hw,
|
|
.get_wideport_bitmap = get_wideport_bitmap_v2_hw,
|
|
.clear_itct = clear_itct_v2_hw,
|
|
.free_device = free_device_v2_hw,
|
|
.prep_smp = prep_smp_v2_hw,
|
|
.prep_ssp = prep_ssp_v2_hw,
|
|
.prep_stp = prep_ata_v2_hw,
|
|
.prep_abort = prep_abort_v2_hw,
|
|
.start_delivery = start_delivery_v2_hw,
|
|
.phys_init = phys_init_v2_hw,
|
|
.phy_start = start_phy_v2_hw,
|
|
.phy_disable = disable_phy_v2_hw,
|
|
.phy_hard_reset = phy_hard_reset_v2_hw,
|
|
.get_events = phy_get_events_v2_hw,
|
|
.phy_set_linkrate = phy_set_linkrate_v2_hw,
|
|
.phy_get_max_linkrate = phy_get_max_linkrate_v2_hw,
|
|
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
|
|
.soft_reset = soft_reset_v2_hw,
|
|
.get_phys_state = get_phys_state_v2_hw,
|
|
.write_gpio = write_gpio_v2_hw,
|
|
.wait_cmds_complete_timeout = wait_cmds_complete_timeout_v2_hw,
|
|
.sht = &sht_v2_hw,
|
|
};
|
|
|
|
static int hisi_sas_v2_probe(struct platform_device *pdev)
|
|
{
|
|
return hisi_sas_probe(pdev, &hisi_sas_v2_hw);
|
|
}
|
|
|
|
static const struct of_device_id sas_v2_of_match[] = {
|
|
{ .compatible = "hisilicon,hip06-sas-v2",},
|
|
{ .compatible = "hisilicon,hip07-sas-v2",},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sas_v2_of_match);
|
|
|
|
static const struct acpi_device_id sas_v2_acpi_match[] = {
|
|
{ "HISI0162", 0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, sas_v2_acpi_match);
|
|
|
|
static struct platform_driver hisi_sas_v2_driver = {
|
|
.probe = hisi_sas_v2_probe,
|
|
.remove_new = hisi_sas_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = sas_v2_of_match,
|
|
.acpi_match_table = ACPI_PTR(sas_v2_acpi_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(hisi_sas_v2_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
|
|
MODULE_DESCRIPTION("HISILICON SAS controller v2 hw driver");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|