187 lines
4.6 KiB
C
187 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Dove thermal sensor driver
|
|
*
|
|
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#define DOVE_THERMAL_TEMP_OFFSET 1
|
|
#define DOVE_THERMAL_TEMP_MASK 0x1FF
|
|
|
|
/* Dove Thermal Manager Control and Status Register */
|
|
#define PMU_TM_DISABLE_OFFS 0
|
|
#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
|
|
|
|
/* Dove Theraml Diode Control 0 Register */
|
|
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
|
|
#define PMU_TDC0_SEL_VCAL_OFFS 5
|
|
#define PMU_TDC0_SEL_VCAL_MASK (0x3 << PMU_TDC0_SEL_VCAL_OFFS)
|
|
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
|
|
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
|
|
#define PMU_TDC0_AVG_NUM_OFFS 25
|
|
#define PMU_TDC0_AVG_NUM_MASK (0x7 << PMU_TDC0_AVG_NUM_OFFS)
|
|
|
|
/* Dove Thermal Diode Control 1 Register */
|
|
#define PMU_TEMP_DIOD_CTRL1_REG 0x04
|
|
#define PMU_TDC1_TEMP_VALID_MASK (0x1 << 10)
|
|
|
|
/* Dove Thermal Sensor Dev Structure */
|
|
struct dove_thermal_priv {
|
|
void __iomem *sensor;
|
|
void __iomem *control;
|
|
};
|
|
|
|
static int dove_init_sensor(const struct dove_thermal_priv *priv)
|
|
{
|
|
u32 reg;
|
|
u32 i;
|
|
|
|
/* Configure the Diode Control Register #0 */
|
|
reg = readl_relaxed(priv->control);
|
|
|
|
/* Use average of 2 */
|
|
reg &= ~PMU_TDC0_AVG_NUM_MASK;
|
|
reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
|
|
|
|
/* Reference calibration value */
|
|
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
|
|
reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
|
|
|
|
/* Set the high level reference for calibration */
|
|
reg &= ~PMU_TDC0_SEL_VCAL_MASK;
|
|
reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
|
|
writel(reg, priv->control);
|
|
|
|
/* Reset the sensor */
|
|
reg = readl_relaxed(priv->control);
|
|
writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
|
|
writel(reg, priv->control);
|
|
|
|
/* Enable the sensor */
|
|
reg = readl_relaxed(priv->sensor);
|
|
reg &= ~PMU_TM_DISABLE_MASK;
|
|
writel(reg, priv->sensor);
|
|
|
|
/* Poll the sensor for the first reading */
|
|
for (i = 0; i < 1000000; i++) {
|
|
reg = readl_relaxed(priv->sensor);
|
|
if (reg & DOVE_THERMAL_TEMP_MASK)
|
|
break;
|
|
}
|
|
|
|
if (i == 1000000)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dove_get_temp(struct thermal_zone_device *thermal,
|
|
int *temp)
|
|
{
|
|
unsigned long reg;
|
|
struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);
|
|
|
|
/* Valid check */
|
|
reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
|
|
if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
|
|
return -EIO;
|
|
|
|
/*
|
|
* Calculate temperature. According to Marvell internal
|
|
* documentation the formula for this is:
|
|
* Celsius = (322-reg)/1.3625
|
|
*/
|
|
reg = readl_relaxed(priv->sensor);
|
|
reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
|
|
*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct thermal_zone_device_ops ops = {
|
|
.get_temp = dove_get_temp,
|
|
};
|
|
|
|
static const struct of_device_id dove_thermal_id_table[] = {
|
|
{ .compatible = "marvell,dove-thermal" },
|
|
{}
|
|
};
|
|
|
|
static int dove_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct thermal_zone_device *thermal = NULL;
|
|
struct dove_thermal_priv *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
|
if (IS_ERR(priv->sensor))
|
|
return PTR_ERR(priv->sensor);
|
|
|
|
priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
|
|
if (IS_ERR(priv->control))
|
|
return PTR_ERR(priv->control);
|
|
|
|
ret = dove_init_sensor(priv);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to initialize sensor\n");
|
|
return ret;
|
|
}
|
|
|
|
thermal = thermal_zone_device_register("dove_thermal", 0, 0,
|
|
priv, &ops, NULL, 0, 0);
|
|
if (IS_ERR(thermal)) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to register thermal zone device\n");
|
|
return PTR_ERR(thermal);
|
|
}
|
|
|
|
ret = thermal_zone_device_enable(thermal);
|
|
if (ret) {
|
|
thermal_zone_device_unregister(thermal);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, thermal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dove_thermal_exit(struct platform_device *pdev)
|
|
{
|
|
struct thermal_zone_device *dove_thermal =
|
|
platform_get_drvdata(pdev);
|
|
|
|
thermal_zone_device_unregister(dove_thermal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
|
|
|
|
static struct platform_driver dove_thermal_driver = {
|
|
.probe = dove_thermal_probe,
|
|
.remove = dove_thermal_exit,
|
|
.driver = {
|
|
.name = "dove_thermal",
|
|
.of_match_table = dove_thermal_id_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dove_thermal_driver);
|
|
|
|
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
|
|
MODULE_DESCRIPTION("Dove thermal driver");
|
|
MODULE_LICENSE("GPL");
|