linux-zen-desktop/drivers/thermal/ti-soc-thermal/ti-bandgap.c

1300 lines
33 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* TI Bandgap temperature sensor driver
*
* Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
* Author: J Keerthy <j-keerthy@ti.com>
* Author: Moiz Sonasath <m-sonasath@ti.com>
* Couple of fixes, DT and MFD adaptation:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
#include <linux/clk.h>
#include <linux/cpu_pm.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/sys_soc.h>
#include <linux/types.h>
#include "ti-bandgap.h"
static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
#ifdef CONFIG_PM_SLEEP
static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
unsigned long cmd, void *v);
#endif
/*** Helper functions to access registers and their bitfields ***/
/**
* ti_bandgap_readl() - simple read helper function
* @bgp: pointer to ti_bandgap structure
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
* Return: the register value.
*/
static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
return readl(bgp->base + reg);
}
/**
* ti_bandgap_writel() - simple write helper function
* @bgp: pointer to ti_bandgap structure
* @val: desired register value to be written
* @reg: desired register (offset) to be written
*
* Helper function to write bandgap registers. It uses the io remapped area.
*/
static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
{
writel(val, bgp->base + reg);
}
/**
* DOC: macro to update bits.
*
* RMW_BITS() - used to read, modify and update bandgap bitfields.
* The value passed will be shifted.
*/
#define RMW_BITS(bgp, id, reg, mask, val) \
do { \
struct temp_sensor_registers *t; \
u32 r; \
\
t = bgp->conf->sensors[(id)].registers; \
r = ti_bandgap_readl(bgp, t->reg); \
r &= ~t->mask; \
r |= (val) << __ffs(t->mask); \
ti_bandgap_writel(bgp, r, t->reg); \
} while (0)
/*** Basic helper functions ***/
/**
* ti_bandgap_power() - controls the power state of a bandgap device
* @bgp: pointer to ti_bandgap structure
* @on: desired power state (1 - on, 0 - off)
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
*
* Return: 0 on success, -ENOTSUPP if tempsoff is not supported.
*/
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
int i;
if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
return -ENOTSUPP;
for (i = 0; i < bgp->conf->sensor_count; i++)
/* active on 0 */
RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
return 0;
}
/**
* ti_errata814_bandgap_read_temp() - helper function to read dra7 sensor temperature
* @bgp: pointer to ti_bandgap structure
* @reg: desired register (offset) to be read
*
* Function to read dra7 bandgap sensor temperature. This is done separately
* so as to workaround the errata "Bandgap Temperature read Dtemp can be
* corrupted" - Errata ID: i814".
* Read accesses to registers listed below can be corrupted due to incorrect
* resynchronization between clock domains.
* Read access to registers below can be corrupted :
* CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4)
* CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n
*
* Return: the register value.
*/
static u32 ti_errata814_bandgap_read_temp(struct ti_bandgap *bgp, u32 reg)
{
u32 val1, val2;
val1 = ti_bandgap_readl(bgp, reg);
val2 = ti_bandgap_readl(bgp, reg);
/* If both times we read the same value then that is right */
if (val1 == val2)
return val1;
/* if val1 and val2 are different read it third time */
return ti_bandgap_readl(bgp, reg);
}
/**
* ti_bandgap_read_temp() - helper function to read sensor temperature
* @bgp: pointer to ti_bandgap structure
* @id: bandgap sensor id
*
* Function to concentrate the steps to read sensor temperature register.
* This function is desired because, depending on bandgap device version,
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
*
* Return: temperature in ADC values.
*/
static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr;
u32 temp, reg;
tsr = bgp->conf->sensors[id].registers;
reg = tsr->temp_sensor_ctrl;
if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
/*
* In case we cannot read from cur_dtemp / dtemp_0,
* then we read from the last valid temp read
*/
reg = tsr->ctrl_dtemp_1;
}
/* read temperature */
if (TI_BANDGAP_HAS(bgp, ERRATA_814))
temp = ti_errata814_bandgap_read_temp(bgp, reg);
else
temp = ti_bandgap_readl(bgp, reg);
temp &= tsr->bgap_dtemp_mask;
if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
return temp;
}
/*** IRQ handlers ***/
/**
* ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
* @irq: IRQ number
* @data: private data (struct ti_bandgap *)
*
* This is the Talert handler. Use it only if bandgap device features
* HAS(TALERT). This handler goes over all sensors and checks their
* conditions and acts accordingly. In case there are events pending,
* it will reset the event mask to wait for the opposite event (next event).
* Every time there is a new event, it will be reported to thermal layer.
*
* Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
struct ti_bandgap *bgp = data;
struct temp_sensor_registers *tsr;
u32 t_hot = 0, t_cold = 0, ctrl;
int i;
spin_lock(&bgp->lock);
for (i = 0; i < bgp->conf->sensor_count; i++) {
tsr = bgp->conf->sensors[i].registers;
ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);
/* Read the status of t_hot */
t_hot = ctrl & tsr->status_hot_mask;
/* Read the status of t_cold */
t_cold = ctrl & tsr->status_cold_mask;
if (!t_cold && !t_hot)
continue;
ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
/*
* One TALERT interrupt: Two sources
* If the interrupt is due to t_hot then mask t_hot and
* unmask t_cold else mask t_cold and unmask t_hot
*/
if (t_hot) {
ctrl &= ~tsr->mask_hot_mask;
ctrl |= tsr->mask_cold_mask;
} else if (t_cold) {
ctrl &= ~tsr->mask_cold_mask;
ctrl |= tsr->mask_hot_mask;
}
ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
dev_dbg(bgp->dev,
"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
__func__, bgp->conf->sensors[i].domain,
t_hot, t_cold);
/* report temperature to whom may concern */
if (bgp->conf->report_temperature)
bgp->conf->report_temperature(bgp, i);
}
spin_unlock(&bgp->lock);
return IRQ_HANDLED;
}
/**
* ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
* @irq: IRQ number
* @data: private data (unused)
*
* This is the Tshut handler. Use it only if bandgap device features
* HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
* the system.
*
* Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
__func__);
orderly_poweroff(true);
return IRQ_HANDLED;
}
/*** Helper functions which manipulate conversion ADC <-> mi Celsius ***/
/**
* ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
* @bgp: struct ti_bandgap pointer
* @adc_val: value in ADC representation
* @t: address where to write the resulting temperature in mCelsius
*
* Simple conversion from ADC representation to mCelsius. In case the ADC value
* is out of the ADC conv table range, it returns -ERANGE, 0 on success.
* The conversion table is indexed by the ADC values.
*
* Return: 0 if conversion was successful, else -ERANGE in case the @adc_val
* argument is out of the ADC conv table range.
*/
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
const struct ti_bandgap_data *conf = bgp->conf;
/* look up for temperature in the table and return the temperature */
if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
return -ERANGE;
*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
return 0;
}
/**
* ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
* @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
*
* Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if
* @id cannot index @bgp sensors.
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
if (!bgp || IS_ERR(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
return -EINVAL;
}
if ((id < 0) || (id >= bgp->conf->sensor_count)) {
dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
return -ERANGE;
}
return 0;
}
/**
* ti_bandgap_read_counter() - read the sensor counter
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: resulting update interval in miliseconds
*/
static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id,
int *interval)
{
struct temp_sensor_registers *tsr;
int time;
tsr = bgp->conf->sensors[id].registers;
time = ti_bandgap_readl(bgp, tsr->bgap_counter);
time = (time & tsr->counter_mask) >>
__ffs(tsr->counter_mask);
time = time * 1000 / bgp->clk_rate;
*interval = time;
}
/**
* ti_bandgap_read_counter_delay() - read the sensor counter delay
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: resulting update interval in miliseconds
*/
static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id,
int *interval)
{
struct temp_sensor_registers *tsr;
int reg_val;
tsr = bgp->conf->sensors[id].registers;
reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
reg_val = (reg_val & tsr->mask_counter_delay_mask) >>
__ffs(tsr->mask_counter_delay_mask);
switch (reg_val) {
case 0:
*interval = 0;
break;
case 1:
*interval = 1;
break;
case 2:
*interval = 10;
break;
case 3:
*interval = 100;
break;
case 4:
*interval = 250;
break;
case 5:
*interval = 500;
break;
default:
dev_warn(bgp->dev, "Wrong counter delay value read from register %X",
reg_val);
}
}
/**
* ti_bandgap_read_update_interval() - read the sensor update interval
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: resulting update interval in miliseconds
*
* Return: 0 on success or the proper error code
*/
int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
int *interval)
{
int ret = 0;
ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
!TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
ret = -ENOTSUPP;
goto exit;
}
if (TI_BANDGAP_HAS(bgp, COUNTER)) {
ti_bandgap_read_counter(bgp, id, interval);
goto exit;
}
ti_bandgap_read_counter_delay(bgp, id, interval);
exit:
return ret;
}
/**
* ti_bandgap_write_counter_delay() - set the counter_delay
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: desired update interval in miliseconds
*
* Return: 0 on success or the proper error code
*/
static int ti_bandgap_write_counter_delay(struct ti_bandgap *bgp, int id,
u32 interval)
{
int rval;
switch (interval) {
case 0: /* Immediate conversion */
rval = 0x0;
break;
case 1: /* Conversion after ever 1ms */
rval = 0x1;
break;
case 10: /* Conversion after ever 10ms */
rval = 0x2;
break;
case 100: /* Conversion after ever 100ms */
rval = 0x3;
break;
case 250: /* Conversion after ever 250ms */
rval = 0x4;
break;
case 500: /* Conversion after ever 500ms */
rval = 0x5;
break;
default:
dev_warn(bgp->dev, "Delay %d ms is not supported\n", interval);
return -EINVAL;
}
spin_lock(&bgp->lock);
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_counter_delay_mask, rval);
spin_unlock(&bgp->lock);
return 0;
}
/**
* ti_bandgap_write_counter() - set the bandgap sensor counter
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: desired update interval in miliseconds
*/
static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id,
u32 interval)
{
interval = interval * bgp->clk_rate / 1000;
spin_lock(&bgp->lock);
RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
spin_unlock(&bgp->lock);
}
/**
* ti_bandgap_write_update_interval() - set the update interval
* @bgp: pointer to bandgap instance
* @id: sensor id
* @interval: desired update interval in miliseconds
*
* Return: 0 on success or the proper error code
*/
int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
int id, u32 interval)
{
int ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
!TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
ret = -ENOTSUPP;
goto exit;
}
if (TI_BANDGAP_HAS(bgp, COUNTER)) {
ti_bandgap_write_counter(bgp, id, interval);
goto exit;
}
ret = ti_bandgap_write_counter_delay(bgp, id, interval);
exit:
return ret;
}
/**
* ti_bandgap_read_temperature() - report current temperature
* @bgp: pointer to bandgap instance
* @id: sensor id
* @temperature: resulting temperature
*
* Return: 0 on success or the proper error code
*/
int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
int *temperature)
{
u32 temp;
int ret;
ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
if (!TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
ret = ti_bandgap_force_single_read(bgp, id);
if (ret)
return ret;
}
spin_lock(&bgp->lock);
temp = ti_bandgap_read_temp(bgp, id);
spin_unlock(&bgp->lock);
ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
*temperature = temp;
return 0;
}
/**
* ti_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
* @bgp: pointer to bandgap instance
* @id: sensor id
* @data: thermal framework related data to be stored
*
* Return: 0 on success or the proper error code
*/
int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
bgp->regval[id].data = data;
return 0;
}
/**
* ti_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
* @bgp: pointer to bandgap instance
* @id: sensor id
*
* Return: data stored by set function with sensor id on success or NULL
*/
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ERR_PTR(ret);
return bgp->regval[id].data;
}
/*** Helper functions used during device initialization ***/
/**
* ti_bandgap_force_single_read() - executes 1 single ADC conversion
* @bgp: pointer to struct ti_bandgap
* @id: sensor id which it is desired to read 1 temperature
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
*
* Return: 0
*/
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr = bgp->conf->sensors[id].registers;
void __iomem *temp_sensor_ctrl = bgp->base + tsr->temp_sensor_ctrl;
int error;
u32 val;
/* Select continuous or single conversion mode */
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
if (TI_BANDGAP_HAS(bgp, CONT_MODE_ONLY))
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 1);
else
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
}
/* Set Start of Conversion if available */
if (tsr->bgap_soc_mask) {
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait for EOCZ going up */
error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
val & tsr->bgap_eocz_mask,
1, 1000);
if (error)
dev_warn(bgp->dev, "eocz timed out waiting high\n");
/* Clear Start of Conversion if available */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
}
/* Wait for EOCZ going down, always needed even if no bgap_soc_mask */
error = readl_poll_timeout_atomic(temp_sensor_ctrl, val,
!(val & tsr->bgap_eocz_mask),
1, 1500);
if (error)
dev_warn(bgp->dev, "eocz timed out waiting low\n");
return 0;
}
/**
* ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
* @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
*
* Return: 0
*/
static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
int i;
for (i = 0; i < bgp->conf->sensor_count; i++) {
/* Perform a single read just before enabling continuous */
ti_bandgap_force_single_read(bgp, i);
RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
}
return 0;
}
/**
* ti_bandgap_get_trend() - To fetch the temperature trend of a sensor
* @bgp: pointer to struct ti_bandgap
* @id: id of the individual sensor
* @trend: Pointer to trend.
*
* This function needs to be called to fetch the temperature trend of a
* Particular sensor. The function computes the difference in temperature
* w.r.t time. For the bandgaps with built in history buffer the temperatures
* are read from the buffer and for those without the Buffer -ENOTSUPP is
* returned.
*
* Return: 0 if no error, else return corresponding error. If no
* error then the trend value is passed on to trend parameter
*/
int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
{
struct temp_sensor_registers *tsr;
u32 temp1, temp2, reg1, reg2;
int t1, t2, interval, ret = 0;
ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) ||
!TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
ret = -ENOTSUPP;
goto exit;
}
spin_lock(&bgp->lock);
tsr = bgp->conf->sensors[id].registers;
/* Freeze and read the last 2 valid readings */
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
reg1 = tsr->ctrl_dtemp_1;
reg2 = tsr->ctrl_dtemp_2;
/* read temperature from history buffer */
temp1 = ti_bandgap_readl(bgp, reg1);
temp1 &= tsr->bgap_dtemp_mask;
temp2 = ti_bandgap_readl(bgp, reg2);
temp2 &= tsr->bgap_dtemp_mask;
/* Convert from adc values to mCelsius temperature */
ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1);
if (ret)
goto unfreeze;
ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2);
if (ret)
goto unfreeze;
/* Fetch the update interval */
ret = ti_bandgap_read_update_interval(bgp, id, &interval);
if (ret)
goto unfreeze;
/* Set the interval to 1 ms if bandgap counter delay is not set */
if (interval == 0)
interval = 1;
*trend = (t1 - t2) / interval;
dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
t1, t2, *trend);
unfreeze:
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
spin_unlock(&bgp->lock);
exit:
return ret;
}
/**
* ti_bandgap_tshut_init() - setup and initialize tshut handling
* @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TSHUT).
* In this case, the driver needs to handle the TSHUT signal as an IRQ.
* The IRQ is wired as a GPIO, and for this purpose, it is required
* to specify which GPIO line is used. TSHUT IRQ is fired anytime
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
*
* Return: 0 if no error, else error status
*/
static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
{
int status;
status = request_irq(gpiod_to_irq(bgp->tshut_gpiod),
ti_bandgap_tshut_irq_handler,
IRQF_TRIGGER_RISING, "tshut", NULL);
if (status)
dev_err(bgp->dev, "request irq failed for TSHUT");
return 0;
}
/**
* ti_bandgap_talert_init() - setup and initialize talert handling
* @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TALERT).
* In this case, the driver needs to handle the TALERT signals as an IRQs.
* TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
*
* Return: 0 if no error, else return corresponding error.
*/
static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
{
int ret;
bgp->irq = platform_get_irq(pdev, 0);
if (bgp->irq < 0)
return bgp->irq;
ret = request_threaded_irq(bgp->irq, NULL,
ti_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"talert", bgp);
if (ret) {
dev_err(&pdev->dev, "Request threaded irq failed.\n");
return ret;
}
return 0;
}
static const struct of_device_id of_ti_bandgap_match[];
/**
* ti_bandgap_build() - parse DT and setup a struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
* will build a struct ti_bandgap out of the required DT entries.
*
* Return: valid bandgap structure if successful, else returns ERR_PTR
* return value must be verified with IS_ERR.
*/
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *of_id;
struct ti_bandgap *bgp;
struct resource *res;
int i;
/* just for the sake */
if (!node) {
dev_err(&pdev->dev, "no platform information available\n");
return ERR_PTR(-EINVAL);
}
bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
if (!bgp)
return ERR_PTR(-ENOMEM);
of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
bgp->conf = of_id->data;
/* register shadow for context save and restore */
bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
sizeof(*bgp->regval), GFP_KERNEL);
if (!bgp->regval)
return ERR_PTR(-ENOMEM);
i = 0;
do {
void __iomem *chunk;
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!res)
break;
chunk = devm_ioremap_resource(&pdev->dev, res);
if (i == 0)
bgp->base = chunk;
if (IS_ERR(chunk))
return ERR_CAST(chunk);
i++;
} while (res);
if (TI_BANDGAP_HAS(bgp, TSHUT)) {
bgp->tshut_gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
if (IS_ERR(bgp->tshut_gpiod)) {
dev_err(&pdev->dev, "invalid gpio for tshut\n");
return ERR_CAST(bgp->tshut_gpiod);
}
}
return bgp;
}
/*
* List of SoCs on which the CPU PM notifier can cause erros on the DTEMP
* readout.
* Enabled notifier on these machines results in erroneous, random values which
* could trigger unexpected thermal shutdown.
*/
static const struct soc_device_attribute soc_no_cpu_notifier[] = {
{ .machine = "OMAP4430" },
{ /* sentinel */ }
};
/*** Device driver call backs ***/
static
int ti_bandgap_probe(struct platform_device *pdev)
{
struct ti_bandgap *bgp;
int clk_rate, ret, i;
bgp = ti_bandgap_build(pdev);
if (IS_ERR(bgp)) {
dev_err(&pdev->dev, "failed to fetch platform data\n");
return PTR_ERR(bgp);
}
bgp->dev = &pdev->dev;
if (TI_BANDGAP_HAS(bgp, UNRELIABLE))
dev_warn(&pdev->dev,
"This OMAP thermal sensor is unreliable. You've been warned\n");
if (TI_BANDGAP_HAS(bgp, TSHUT)) {
ret = ti_bandgap_tshut_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize system tshut IRQ\n");
return ret;
}
}
bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
if (IS_ERR(bgp->fclock)) {
dev_err(&pdev->dev, "failed to request fclock reference\n");
ret = PTR_ERR(bgp->fclock);
goto free_irqs;
}
bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
if (IS_ERR(bgp->div_clk)) {
dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
ret = PTR_ERR(bgp->div_clk);
goto put_fclock;
}
for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
u32 val;
tsr = bgp->conf->sensors[i].registers;
/*
* check if the efuse has a non-zero value if not
* it is an untrimmed sample and the temperatures
* may not be accurate
*/
val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
if (!val)
dev_info(&pdev->dev,
"Non-trimmed BGAP, Temp not accurate\n");
}
clk_rate = clk_round_rate(bgp->div_clk,
bgp->conf->sensors[0].ts_data->max_freq);
if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
clk_rate <= 0) {
ret = -ENODEV;
dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
goto put_clks;
}
ret = clk_set_rate(bgp->div_clk, clk_rate);
if (ret)
dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
bgp->clk_rate = clk_rate;
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
spin_lock_init(&bgp->lock);
bgp->dev = &pdev->dev;
platform_set_drvdata(pdev, bgp);
ti_bandgap_power(bgp, true);
/* Set default counter to 1 for now */
if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
/* Set default thresholds for alert and shutdown */
for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_data *ts_data;
ts_data = bgp->conf->sensors[i].ts_data;
if (TI_BANDGAP_HAS(bgp, TALERT)) {
/* Set initial Talert thresholds */
RMW_BITS(bgp, i, bgap_threshold,
threshold_tcold_mask, ts_data->t_cold);
RMW_BITS(bgp, i, bgap_threshold,
threshold_thot_mask, ts_data->t_hot);
/* Enable the alert events */
RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
}
if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
/* Set initial Tshut thresholds */
RMW_BITS(bgp, i, tshut_threshold,
tshut_hot_mask, ts_data->tshut_hot);
RMW_BITS(bgp, i, tshut_threshold,
tshut_cold_mask, ts_data->tshut_cold);
}
}
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
ti_bandgap_set_continuous_mode(bgp);
/* Set .250 seconds time as default counter */
if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask,
bgp->clk_rate / 4);
/* Every thing is good? Then expose the sensors */
for (i = 0; i < bgp->conf->sensor_count; i++) {
char *domain;
if (bgp->conf->sensors[i].register_cooling) {
ret = bgp->conf->sensors[i].register_cooling(bgp, i);
if (ret)
goto remove_sensors;
}
if (bgp->conf->expose_sensor) {
domain = bgp->conf->sensors[i].domain;
ret = bgp->conf->expose_sensor(bgp, i, domain);
if (ret)
goto remove_last_cooling;
}
}
/*
* Enable the Interrupts once everything is set. Otherwise irq handler
* might be called as soon as it is enabled where as rest of framework
* is still getting initialised.
*/
if (TI_BANDGAP_HAS(bgp, TALERT)) {
ret = ti_bandgap_talert_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
i = bgp->conf->sensor_count;
goto disable_clk;
}
}
#ifdef CONFIG_PM_SLEEP
bgp->nb.notifier_call = bandgap_omap_cpu_notifier;
if (!soc_device_match(soc_no_cpu_notifier))
cpu_pm_register_notifier(&bgp->nb);
#endif
return 0;
remove_last_cooling:
if (bgp->conf->sensors[i].unregister_cooling)
bgp->conf->sensors[i].unregister_cooling(bgp, i);
remove_sensors:
for (i--; i >= 0; i--) {
if (bgp->conf->sensors[i].unregister_cooling)
bgp->conf->sensors[i].unregister_cooling(bgp, i);
if (bgp->conf->remove_sensor)
bgp->conf->remove_sensor(bgp, i);
}
ti_bandgap_power(bgp, false);
disable_clk:
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
put_clks:
clk_put(bgp->div_clk);
put_fclock:
clk_put(bgp->fclock);
free_irqs:
if (TI_BANDGAP_HAS(bgp, TSHUT))
free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
return ret;
}
static
int ti_bandgap_remove(struct platform_device *pdev)
{
struct ti_bandgap *bgp = platform_get_drvdata(pdev);
int i;
if (!soc_device_match(soc_no_cpu_notifier))
cpu_pm_unregister_notifier(&bgp->nb);
/* Remove sensor interfaces */
for (i = 0; i < bgp->conf->sensor_count; i++) {
if (bgp->conf->sensors[i].unregister_cooling)
bgp->conf->sensors[i].unregister_cooling(bgp, i);
if (bgp->conf->remove_sensor)
bgp->conf->remove_sensor(bgp, i);
}
ti_bandgap_power(bgp, false);
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
if (TI_BANDGAP_HAS(bgp, TALERT))
free_irq(bgp->irq, bgp);
if (TI_BANDGAP_HAS(bgp, TSHUT))
free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
int i;
for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mode_ctrl);
if (TI_BANDGAP_HAS(bgp, COUNTER))
rval->bg_counter = ti_bandgap_readl(bgp,
tsr->bgap_counter);
if (TI_BANDGAP_HAS(bgp, TALERT)) {
rval->bg_threshold = ti_bandgap_readl(bgp,
tsr->bgap_threshold);
rval->bg_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mask_ctrl);
}
if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
rval->tshut_threshold = ti_bandgap_readl(bgp,
tsr->tshut_threshold);
}
return 0;
}
static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
{
int i;
for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
ti_bandgap_writel(bgp, rval->tshut_threshold,
tsr->tshut_threshold);
/* Force immediate temperature measurement and update
* of the DTEMP field
*/
ti_bandgap_force_single_read(bgp, i);
if (TI_BANDGAP_HAS(bgp, COUNTER))
ti_bandgap_writel(bgp, rval->bg_counter,
tsr->bgap_counter);
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
tsr->bgap_mode_ctrl);
if (TI_BANDGAP_HAS(bgp, TALERT)) {
ti_bandgap_writel(bgp, rval->bg_threshold,
tsr->bgap_threshold);
ti_bandgap_writel(bgp, rval->bg_ctrl,
tsr->bgap_mask_ctrl);
}
}
return 0;
}
static int ti_bandgap_suspend(struct device *dev)
{
struct ti_bandgap *bgp = dev_get_drvdata(dev);
int err;
err = ti_bandgap_save_ctxt(bgp);
ti_bandgap_power(bgp, false);
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
bgp->is_suspended = true;
return err;
}
static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
unsigned long cmd, void *v)
{
struct ti_bandgap *bgp;
bgp = container_of(nb, struct ti_bandgap, nb);
spin_lock(&bgp->lock);
switch (cmd) {
case CPU_CLUSTER_PM_ENTER:
if (bgp->is_suspended)
break;
ti_bandgap_save_ctxt(bgp);
ti_bandgap_power(bgp, false);
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable(bgp->fclock);
break;
case CPU_CLUSTER_PM_ENTER_FAILED:
case CPU_CLUSTER_PM_EXIT:
if (bgp->is_suspended)
break;
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_enable(bgp->fclock);
ti_bandgap_power(bgp, true);
ti_bandgap_restore_ctxt(bgp);
break;
}
spin_unlock(&bgp->lock);
return NOTIFY_OK;
}
static int ti_bandgap_resume(struct device *dev)
{
struct ti_bandgap *bgp = dev_get_drvdata(dev);
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
ti_bandgap_power(bgp, true);
bgp->is_suspended = false;
return ti_bandgap_restore_ctxt(bgp);
}
static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
ti_bandgap_resume);
#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
static const struct of_device_id of_ti_bandgap_match[] = {
#ifdef CONFIG_OMAP3_THERMAL
{
.compatible = "ti,omap34xx-bandgap",
.data = (void *)&omap34xx_data,
},
{
.compatible = "ti,omap36xx-bandgap",
.data = (void *)&omap36xx_data,
},
#endif
#ifdef CONFIG_OMAP4_THERMAL
{
.compatible = "ti,omap4430-bandgap",
.data = (void *)&omap4430_data,
},
{
.compatible = "ti,omap4460-bandgap",
.data = (void *)&omap4460_data,
},
{
.compatible = "ti,omap4470-bandgap",
.data = (void *)&omap4470_data,
},
#endif
#ifdef CONFIG_OMAP5_THERMAL
{
.compatible = "ti,omap5430-bandgap",
.data = (void *)&omap5430_data,
},
#endif
#ifdef CONFIG_DRA752_THERMAL
{
.compatible = "ti,dra752-bandgap",
.data = (void *)&dra752_data,
},
#endif
/* Sentinel */
{ },
};
MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
static struct platform_driver ti_bandgap_sensor_driver = {
.probe = ti_bandgap_probe,
.remove = ti_bandgap_remove,
.driver = {
.name = "ti-soc-thermal",
.pm = DEV_PM_OPS,
.of_match_table = of_ti_bandgap_match,
},
};
module_platform_driver(ti_bandgap_sensor_driver);
MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ti-soc-thermal");
MODULE_AUTHOR("Texas Instrument Inc.");