1529 lines
54 KiB
C
1529 lines
54 KiB
C
/* SPDX-License-Identifier: LGPL-2.0+ WITH Linux-syscall-note */
|
|
/*
|
|
* comedi.h
|
|
* header file for COMEDI user API
|
|
*
|
|
* COMEDI - Linux Control and Measurement Device Interface
|
|
* Copyright (C) 1998-2001 David A. Schleef <ds@schleef.org>
|
|
*/
|
|
|
|
#ifndef _COMEDI_H
|
|
#define _COMEDI_H
|
|
|
|
#define COMEDI_MAJORVERSION 0
|
|
#define COMEDI_MINORVERSION 7
|
|
#define COMEDI_MICROVERSION 76
|
|
#define VERSION "0.7.76"
|
|
|
|
/* comedi's major device number */
|
|
#define COMEDI_MAJOR 98
|
|
|
|
/*
|
|
* maximum number of minor devices. This can be increased, although
|
|
* kernel structures are currently statically allocated, thus you
|
|
* don't want this to be much more than you actually use.
|
|
*/
|
|
#define COMEDI_NDEVICES 16
|
|
|
|
/* number of config options in the config structure */
|
|
#define COMEDI_NDEVCONFOPTS 32
|
|
|
|
/*
|
|
* NOTE: 'comedi_config --init-data' is deprecated
|
|
*
|
|
* The following indexes in the config options were used by
|
|
* comedi_config to pass firmware blobs from user space to the
|
|
* comedi drivers. The request_firmware() hotplug interface is
|
|
* now used by all comedi drivers instead.
|
|
*/
|
|
|
|
/* length of nth chunk of firmware data -*/
|
|
#define COMEDI_DEVCONF_AUX_DATA3_LENGTH 25
|
|
#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26
|
|
#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27
|
|
#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28
|
|
/* most significant 32 bits of pointer address (if needed) */
|
|
#define COMEDI_DEVCONF_AUX_DATA_HI 29
|
|
/* least significant 32 bits of pointer address */
|
|
#define COMEDI_DEVCONF_AUX_DATA_LO 30
|
|
#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31 /* total data length */
|
|
|
|
/* max length of device and driver names */
|
|
#define COMEDI_NAMELEN 20
|
|
|
|
/* packs and unpacks a channel/range number */
|
|
|
|
#define CR_PACK(chan, rng, aref) \
|
|
((((aref) & 0x3) << 24) | (((rng) & 0xff) << 16) | (chan))
|
|
#define CR_PACK_FLAGS(chan, range, aref, flags) \
|
|
(CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK))
|
|
|
|
#define CR_CHAN(a) ((a) & 0xffff)
|
|
#define CR_RANGE(a) (((a) >> 16) & 0xff)
|
|
#define CR_AREF(a) (((a) >> 24) & 0x03)
|
|
|
|
#define CR_FLAGS_MASK 0xfc000000
|
|
#define CR_ALT_FILTER 0x04000000
|
|
#define CR_DITHER CR_ALT_FILTER
|
|
#define CR_DEGLITCH CR_ALT_FILTER
|
|
#define CR_ALT_SOURCE 0x08000000
|
|
#define CR_EDGE 0x40000000
|
|
#define CR_INVERT 0x80000000
|
|
|
|
#define AREF_GROUND 0x00 /* analog ref = analog ground */
|
|
#define AREF_COMMON 0x01 /* analog ref = analog common */
|
|
#define AREF_DIFF 0x02 /* analog ref = differential */
|
|
#define AREF_OTHER 0x03 /* analog ref = other (undefined) */
|
|
|
|
/* counters -- these are arbitrary values */
|
|
#define GPCT_RESET 0x0001
|
|
#define GPCT_SET_SOURCE 0x0002
|
|
#define GPCT_SET_GATE 0x0004
|
|
#define GPCT_SET_DIRECTION 0x0008
|
|
#define GPCT_SET_OPERATION 0x0010
|
|
#define GPCT_ARM 0x0020
|
|
#define GPCT_DISARM 0x0040
|
|
#define GPCT_GET_INT_CLK_FRQ 0x0080
|
|
|
|
#define GPCT_INT_CLOCK 0x0001
|
|
#define GPCT_EXT_PIN 0x0002
|
|
#define GPCT_NO_GATE 0x0004
|
|
#define GPCT_UP 0x0008
|
|
#define GPCT_DOWN 0x0010
|
|
#define GPCT_HWUD 0x0020
|
|
#define GPCT_SIMPLE_EVENT 0x0040
|
|
#define GPCT_SINGLE_PERIOD 0x0080
|
|
#define GPCT_SINGLE_PW 0x0100
|
|
#define GPCT_CONT_PULSE_OUT 0x0200
|
|
#define GPCT_SINGLE_PULSE_OUT 0x0400
|
|
|
|
/* instructions */
|
|
|
|
#define INSN_MASK_WRITE 0x8000000
|
|
#define INSN_MASK_READ 0x4000000
|
|
#define INSN_MASK_SPECIAL 0x2000000
|
|
|
|
#define INSN_READ (0 | INSN_MASK_READ)
|
|
#define INSN_WRITE (1 | INSN_MASK_WRITE)
|
|
#define INSN_BITS (2 | INSN_MASK_READ | INSN_MASK_WRITE)
|
|
#define INSN_CONFIG (3 | INSN_MASK_READ | INSN_MASK_WRITE)
|
|
#define INSN_DEVICE_CONFIG (INSN_CONFIG | INSN_MASK_SPECIAL)
|
|
#define INSN_GTOD (4 | INSN_MASK_READ | INSN_MASK_SPECIAL)
|
|
#define INSN_WAIT (5 | INSN_MASK_WRITE | INSN_MASK_SPECIAL)
|
|
#define INSN_INTTRIG (6 | INSN_MASK_WRITE | INSN_MASK_SPECIAL)
|
|
|
|
/* command flags */
|
|
/* These flags are used in comedi_cmd structures */
|
|
|
|
#define CMDF_BOGUS 0x00000001 /* do the motions */
|
|
|
|
/* try to use a real-time interrupt while performing command */
|
|
#define CMDF_PRIORITY 0x00000008
|
|
|
|
/* wake up on end-of-scan events */
|
|
#define CMDF_WAKE_EOS 0x00000020
|
|
|
|
#define CMDF_WRITE 0x00000040
|
|
|
|
#define CMDF_RAWDATA 0x00000080
|
|
|
|
/* timer rounding definitions */
|
|
#define CMDF_ROUND_MASK 0x00030000
|
|
#define CMDF_ROUND_NEAREST 0x00000000
|
|
#define CMDF_ROUND_DOWN 0x00010000
|
|
#define CMDF_ROUND_UP 0x00020000
|
|
#define CMDF_ROUND_UP_NEXT 0x00030000
|
|
|
|
#define COMEDI_EV_START 0x00040000
|
|
#define COMEDI_EV_SCAN_BEGIN 0x00080000
|
|
#define COMEDI_EV_CONVERT 0x00100000
|
|
#define COMEDI_EV_SCAN_END 0x00200000
|
|
#define COMEDI_EV_STOP 0x00400000
|
|
|
|
/* compatibility definitions */
|
|
#define TRIG_BOGUS CMDF_BOGUS
|
|
#define TRIG_RT CMDF_PRIORITY
|
|
#define TRIG_WAKE_EOS CMDF_WAKE_EOS
|
|
#define TRIG_WRITE CMDF_WRITE
|
|
#define TRIG_ROUND_MASK CMDF_ROUND_MASK
|
|
#define TRIG_ROUND_NEAREST CMDF_ROUND_NEAREST
|
|
#define TRIG_ROUND_DOWN CMDF_ROUND_DOWN
|
|
#define TRIG_ROUND_UP CMDF_ROUND_UP
|
|
#define TRIG_ROUND_UP_NEXT CMDF_ROUND_UP_NEXT
|
|
|
|
/* trigger sources */
|
|
|
|
#define TRIG_ANY 0xffffffff
|
|
#define TRIG_INVALID 0x00000000
|
|
|
|
#define TRIG_NONE 0x00000001 /* never trigger */
|
|
#define TRIG_NOW 0x00000002 /* trigger now + N ns */
|
|
#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
|
|
#define TRIG_TIME 0x00000008 /* trigger at time N ns */
|
|
#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
|
|
#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
|
|
#define TRIG_EXT 0x00000040 /* trigger on external signal N */
|
|
#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
|
|
#define TRIG_OTHER 0x00000100 /* driver defined */
|
|
|
|
/* subdevice flags */
|
|
|
|
#define SDF_BUSY 0x0001 /* device is busy */
|
|
#define SDF_BUSY_OWNER 0x0002 /* device is busy with your job */
|
|
#define SDF_LOCKED 0x0004 /* subdevice is locked */
|
|
#define SDF_LOCK_OWNER 0x0008 /* you own lock */
|
|
#define SDF_MAXDATA 0x0010 /* maxdata depends on channel */
|
|
#define SDF_FLAGS 0x0020 /* flags depend on channel */
|
|
#define SDF_RANGETYPE 0x0040 /* range type depends on channel */
|
|
#define SDF_PWM_COUNTER 0x0080 /* PWM can automatically switch off */
|
|
#define SDF_PWM_HBRIDGE 0x0100 /* PWM is signed (H-bridge) */
|
|
#define SDF_CMD 0x1000 /* can do commands (deprecated) */
|
|
#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
|
|
#define SDF_CMD_WRITE 0x4000 /* can do output commands */
|
|
#define SDF_CMD_READ 0x8000 /* can do input commands */
|
|
|
|
/* subdevice can be read (e.g. analog input) */
|
|
#define SDF_READABLE 0x00010000
|
|
/* subdevice can be written (e.g. analog output) */
|
|
#define SDF_WRITABLE 0x00020000
|
|
#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */
|
|
/* subdevice does not have externally visible lines */
|
|
#define SDF_INTERNAL 0x00040000
|
|
#define SDF_GROUND 0x00100000 /* can do aref=ground */
|
|
#define SDF_COMMON 0x00200000 /* can do aref=common */
|
|
#define SDF_DIFF 0x00400000 /* can do aref=diff */
|
|
#define SDF_OTHER 0x00800000 /* can do aref=other */
|
|
#define SDF_DITHER 0x01000000 /* can do dithering */
|
|
#define SDF_DEGLITCH 0x02000000 /* can do deglitching */
|
|
#define SDF_MMAP 0x04000000 /* can do mmap() */
|
|
#define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */
|
|
#define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */
|
|
#define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */
|
|
|
|
/* subdevice types */
|
|
|
|
/**
|
|
* enum comedi_subdevice_type - COMEDI subdevice types
|
|
* @COMEDI_SUBD_UNUSED: Unused subdevice.
|
|
* @COMEDI_SUBD_AI: Analog input.
|
|
* @COMEDI_SUBD_AO: Analog output.
|
|
* @COMEDI_SUBD_DI: Digital input.
|
|
* @COMEDI_SUBD_DO: Digital output.
|
|
* @COMEDI_SUBD_DIO: Digital input/output.
|
|
* @COMEDI_SUBD_COUNTER: Counter.
|
|
* @COMEDI_SUBD_TIMER: Timer.
|
|
* @COMEDI_SUBD_MEMORY: Memory, EEPROM, DPRAM.
|
|
* @COMEDI_SUBD_CALIB: Calibration DACs.
|
|
* @COMEDI_SUBD_PROC: Processor, DSP.
|
|
* @COMEDI_SUBD_SERIAL: Serial I/O.
|
|
* @COMEDI_SUBD_PWM: Pulse-Width Modulation output.
|
|
*/
|
|
enum comedi_subdevice_type {
|
|
COMEDI_SUBD_UNUSED,
|
|
COMEDI_SUBD_AI,
|
|
COMEDI_SUBD_AO,
|
|
COMEDI_SUBD_DI,
|
|
COMEDI_SUBD_DO,
|
|
COMEDI_SUBD_DIO,
|
|
COMEDI_SUBD_COUNTER,
|
|
COMEDI_SUBD_TIMER,
|
|
COMEDI_SUBD_MEMORY,
|
|
COMEDI_SUBD_CALIB,
|
|
COMEDI_SUBD_PROC,
|
|
COMEDI_SUBD_SERIAL,
|
|
COMEDI_SUBD_PWM
|
|
};
|
|
|
|
/* configuration instructions */
|
|
|
|
/**
|
|
* enum comedi_io_direction - COMEDI I/O directions
|
|
* @COMEDI_INPUT: Input.
|
|
* @COMEDI_OUTPUT: Output.
|
|
* @COMEDI_OPENDRAIN: Open-drain (or open-collector) output.
|
|
*
|
|
* These are used by the %INSN_CONFIG_DIO_QUERY configuration instruction to
|
|
* report a direction. They may also be used in other places where a direction
|
|
* needs to be specified.
|
|
*/
|
|
enum comedi_io_direction {
|
|
COMEDI_INPUT = 0,
|
|
COMEDI_OUTPUT = 1,
|
|
COMEDI_OPENDRAIN = 2
|
|
};
|
|
|
|
/**
|
|
* enum configuration_ids - COMEDI configuration instruction codes
|
|
* @INSN_CONFIG_DIO_INPUT: Configure digital I/O as input.
|
|
* @INSN_CONFIG_DIO_OUTPUT: Configure digital I/O as output.
|
|
* @INSN_CONFIG_DIO_OPENDRAIN: Configure digital I/O as open-drain (or open
|
|
* collector) output.
|
|
* @INSN_CONFIG_ANALOG_TRIG: Configure analog trigger.
|
|
* @INSN_CONFIG_ALT_SOURCE: Configure alternate input source.
|
|
* @INSN_CONFIG_DIGITAL_TRIG: Configure digital trigger.
|
|
* @INSN_CONFIG_BLOCK_SIZE: Configure block size for DMA transfers.
|
|
* @INSN_CONFIG_TIMER_1: Configure divisor for external clock.
|
|
* @INSN_CONFIG_FILTER: Configure a filter.
|
|
* @INSN_CONFIG_CHANGE_NOTIFY: Configure change notification for digital
|
|
* inputs. (New drivers should use
|
|
* %INSN_CONFIG_DIGITAL_TRIG instead.)
|
|
* @INSN_CONFIG_SERIAL_CLOCK: Configure clock for serial I/O.
|
|
* @INSN_CONFIG_BIDIRECTIONAL_DATA: Send and receive byte over serial I/O.
|
|
* @INSN_CONFIG_DIO_QUERY: Query direction of digital I/O channel.
|
|
* @INSN_CONFIG_PWM_OUTPUT: Configure pulse-width modulator output.
|
|
* @INSN_CONFIG_GET_PWM_OUTPUT: Get pulse-width modulator output configuration.
|
|
* @INSN_CONFIG_ARM: Arm a subdevice or channel.
|
|
* @INSN_CONFIG_DISARM: Disarm a subdevice or channel.
|
|
* @INSN_CONFIG_GET_COUNTER_STATUS: Get counter status.
|
|
* @INSN_CONFIG_RESET: Reset a subdevice or channel.
|
|
* @INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR: Configure counter/timer as
|
|
* single pulse generator.
|
|
* @INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR: Configure counter/timer as
|
|
* pulse train generator.
|
|
* @INSN_CONFIG_GPCT_QUADRATURE_ENCODER: Configure counter as a quadrature
|
|
* encoder.
|
|
* @INSN_CONFIG_SET_GATE_SRC: Set counter/timer gate source.
|
|
* @INSN_CONFIG_GET_GATE_SRC: Get counter/timer gate source.
|
|
* @INSN_CONFIG_SET_CLOCK_SRC: Set counter/timer master clock source.
|
|
* @INSN_CONFIG_GET_CLOCK_SRC: Get counter/timer master clock source.
|
|
* @INSN_CONFIG_SET_OTHER_SRC: Set counter/timer "other" source.
|
|
* @INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE: Get size (in bytes) of subdevice's
|
|
* on-board FIFOs used during streaming
|
|
* input/output.
|
|
* @INSN_CONFIG_SET_COUNTER_MODE: Set counter/timer mode.
|
|
* @INSN_CONFIG_8254_SET_MODE: (Deprecated) Same as
|
|
* %INSN_CONFIG_SET_COUNTER_MODE.
|
|
* @INSN_CONFIG_8254_READ_STATUS: Read status of 8254 counter channel.
|
|
* @INSN_CONFIG_SET_ROUTING: Set routing for a channel.
|
|
* @INSN_CONFIG_GET_ROUTING: Get routing for a channel.
|
|
* @INSN_CONFIG_PWM_SET_PERIOD: Set PWM period in nanoseconds.
|
|
* @INSN_CONFIG_PWM_GET_PERIOD: Get PWM period in nanoseconds.
|
|
* @INSN_CONFIG_GET_PWM_STATUS: Get PWM status.
|
|
* @INSN_CONFIG_PWM_SET_H_BRIDGE: Set PWM H bridge duty cycle and polarity for
|
|
* a relay simultaneously.
|
|
* @INSN_CONFIG_PWM_GET_H_BRIDGE: Get PWM H bridge duty cycle and polarity.
|
|
* @INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS: Get the hardware timing restraints,
|
|
* regardless of trigger sources.
|
|
*/
|
|
enum configuration_ids {
|
|
INSN_CONFIG_DIO_INPUT = COMEDI_INPUT,
|
|
INSN_CONFIG_DIO_OUTPUT = COMEDI_OUTPUT,
|
|
INSN_CONFIG_DIO_OPENDRAIN = COMEDI_OPENDRAIN,
|
|
INSN_CONFIG_ANALOG_TRIG = 16,
|
|
/* INSN_CONFIG_WAVEFORM = 17, */
|
|
/* INSN_CONFIG_TRIG = 18, */
|
|
/* INSN_CONFIG_COUNTER = 19, */
|
|
INSN_CONFIG_ALT_SOURCE = 20,
|
|
INSN_CONFIG_DIGITAL_TRIG = 21,
|
|
INSN_CONFIG_BLOCK_SIZE = 22,
|
|
INSN_CONFIG_TIMER_1 = 23,
|
|
INSN_CONFIG_FILTER = 24,
|
|
INSN_CONFIG_CHANGE_NOTIFY = 25,
|
|
|
|
INSN_CONFIG_SERIAL_CLOCK = 26, /*ALPHA*/
|
|
INSN_CONFIG_BIDIRECTIONAL_DATA = 27,
|
|
INSN_CONFIG_DIO_QUERY = 28,
|
|
INSN_CONFIG_PWM_OUTPUT = 29,
|
|
INSN_CONFIG_GET_PWM_OUTPUT = 30,
|
|
INSN_CONFIG_ARM = 31,
|
|
INSN_CONFIG_DISARM = 32,
|
|
INSN_CONFIG_GET_COUNTER_STATUS = 33,
|
|
INSN_CONFIG_RESET = 34,
|
|
INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001,
|
|
INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002,
|
|
INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
|
|
INSN_CONFIG_SET_GATE_SRC = 2001,
|
|
INSN_CONFIG_GET_GATE_SRC = 2002,
|
|
INSN_CONFIG_SET_CLOCK_SRC = 2003,
|
|
INSN_CONFIG_GET_CLOCK_SRC = 2004,
|
|
INSN_CONFIG_SET_OTHER_SRC = 2005,
|
|
INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
|
|
INSN_CONFIG_SET_COUNTER_MODE = 4097,
|
|
INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE,
|
|
INSN_CONFIG_8254_READ_STATUS = 4098,
|
|
INSN_CONFIG_SET_ROUTING = 4099,
|
|
INSN_CONFIG_GET_ROUTING = 4109,
|
|
INSN_CONFIG_PWM_SET_PERIOD = 5000,
|
|
INSN_CONFIG_PWM_GET_PERIOD = 5001,
|
|
INSN_CONFIG_GET_PWM_STATUS = 5002,
|
|
INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
|
|
INSN_CONFIG_PWM_GET_H_BRIDGE = 5004,
|
|
INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS = 5005,
|
|
};
|
|
|
|
/**
|
|
* enum device_configuration_ids - COMEDI configuration instruction codes global
|
|
* to an entire device.
|
|
* @INSN_DEVICE_CONFIG_TEST_ROUTE: Validate the possibility of a
|
|
* globally-named route
|
|
* @INSN_DEVICE_CONFIG_CONNECT_ROUTE: Connect a globally-named route
|
|
* @INSN_DEVICE_CONFIG_DISCONNECT_ROUTE:Disconnect a globally-named route
|
|
* @INSN_DEVICE_CONFIG_GET_ROUTES: Get a list of all globally-named routes
|
|
* that are valid for a particular device.
|
|
*/
|
|
enum device_config_route_ids {
|
|
INSN_DEVICE_CONFIG_TEST_ROUTE = 0,
|
|
INSN_DEVICE_CONFIG_CONNECT_ROUTE = 1,
|
|
INSN_DEVICE_CONFIG_DISCONNECT_ROUTE = 2,
|
|
INSN_DEVICE_CONFIG_GET_ROUTES = 3,
|
|
};
|
|
|
|
/**
|
|
* enum comedi_digital_trig_op - operations for configuring a digital trigger
|
|
* @COMEDI_DIGITAL_TRIG_DISABLE: Return digital trigger to its default,
|
|
* inactive, unconfigured state.
|
|
* @COMEDI_DIGITAL_TRIG_ENABLE_EDGES: Set rising and/or falling edge inputs
|
|
* that each can fire the trigger.
|
|
* @COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: Set a combination of high and/or low
|
|
* level inputs that can fire the trigger.
|
|
*
|
|
* These are used with the %INSN_CONFIG_DIGITAL_TRIG configuration instruction.
|
|
* The data for the configuration instruction is as follows...
|
|
*
|
|
* data[%0] = %INSN_CONFIG_DIGITAL_TRIG
|
|
*
|
|
* data[%1] = trigger ID
|
|
*
|
|
* data[%2] = configuration operation
|
|
*
|
|
* data[%3] = configuration parameter 1
|
|
*
|
|
* data[%4] = configuration parameter 2
|
|
*
|
|
* data[%5] = configuration parameter 3
|
|
*
|
|
* The trigger ID (data[%1]) is used to differentiate multiple digital triggers
|
|
* belonging to the same subdevice. The configuration operation (data[%2]) is
|
|
* one of the enum comedi_digital_trig_op values. The configuration
|
|
* parameters (data[%3], data[%4], and data[%5]) depend on the operation; they
|
|
* are not used with %COMEDI_DIGITAL_TRIG_DISABLE.
|
|
*
|
|
* For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES and %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS,
|
|
* configuration parameter 1 (data[%3]) contains a "left-shift" value that
|
|
* specifies the input corresponding to bit 0 of configuration parameters 2
|
|
* and 3. This is useful if the trigger has more than 32 inputs.
|
|
*
|
|
* For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES, configuration parameter 2 (data[%4])
|
|
* specifies which of up to 32 inputs have rising-edge sensitivity, and
|
|
* configuration parameter 3 (data[%5]) specifies which of up to 32 inputs
|
|
* have falling-edge sensitivity that can fire the trigger.
|
|
*
|
|
* For %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS, configuration parameter 2 (data[%4])
|
|
* specifies which of up to 32 inputs must be at a high level, and
|
|
* configuration parameter 3 (data[%5]) specifies which of up to 32 inputs
|
|
* must be at a low level for the trigger to fire.
|
|
*
|
|
* Some sequences of %INSN_CONFIG_DIGITAL_TRIG instructions may have a (partly)
|
|
* accumulative effect, depending on the low-level driver. This is useful
|
|
* when setting up a trigger that has more than 32 inputs, or has a combination
|
|
* of edge- and level-triggered inputs.
|
|
*/
|
|
enum comedi_digital_trig_op {
|
|
COMEDI_DIGITAL_TRIG_DISABLE = 0,
|
|
COMEDI_DIGITAL_TRIG_ENABLE_EDGES = 1,
|
|
COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = 2
|
|
};
|
|
|
|
/**
|
|
* enum comedi_support_level - support level for a COMEDI feature
|
|
* @COMEDI_UNKNOWN_SUPPORT: Unspecified support for feature.
|
|
* @COMEDI_SUPPORTED: Feature is supported.
|
|
* @COMEDI_UNSUPPORTED: Feature is unsupported.
|
|
*/
|
|
enum comedi_support_level {
|
|
COMEDI_UNKNOWN_SUPPORT = 0,
|
|
COMEDI_SUPPORTED,
|
|
COMEDI_UNSUPPORTED
|
|
};
|
|
|
|
/**
|
|
* enum comedi_counter_status_flags - counter status bits
|
|
* @COMEDI_COUNTER_ARMED: Counter is armed.
|
|
* @COMEDI_COUNTER_COUNTING: Counter is counting.
|
|
* @COMEDI_COUNTER_TERMINAL_COUNT: Counter reached terminal count.
|
|
*
|
|
* These bitwise values are used by the %INSN_CONFIG_GET_COUNTER_STATUS
|
|
* configuration instruction to report the status of a counter.
|
|
*/
|
|
enum comedi_counter_status_flags {
|
|
COMEDI_COUNTER_ARMED = 0x1,
|
|
COMEDI_COUNTER_COUNTING = 0x2,
|
|
COMEDI_COUNTER_TERMINAL_COUNT = 0x4,
|
|
};
|
|
|
|
/* ioctls */
|
|
|
|
#define CIO 'd'
|
|
#define COMEDI_DEVCONFIG _IOW(CIO, 0, struct comedi_devconfig)
|
|
#define COMEDI_DEVINFO _IOR(CIO, 1, struct comedi_devinfo)
|
|
#define COMEDI_SUBDINFO _IOR(CIO, 2, struct comedi_subdinfo)
|
|
#define COMEDI_CHANINFO _IOR(CIO, 3, struct comedi_chaninfo)
|
|
/* _IOWR(CIO, 4, ...) is reserved */
|
|
#define COMEDI_LOCK _IO(CIO, 5)
|
|
#define COMEDI_UNLOCK _IO(CIO, 6)
|
|
#define COMEDI_CANCEL _IO(CIO, 7)
|
|
#define COMEDI_RANGEINFO _IOR(CIO, 8, struct comedi_rangeinfo)
|
|
#define COMEDI_CMD _IOR(CIO, 9, struct comedi_cmd)
|
|
#define COMEDI_CMDTEST _IOR(CIO, 10, struct comedi_cmd)
|
|
#define COMEDI_INSNLIST _IOR(CIO, 11, struct comedi_insnlist)
|
|
#define COMEDI_INSN _IOR(CIO, 12, struct comedi_insn)
|
|
#define COMEDI_BUFCONFIG _IOR(CIO, 13, struct comedi_bufconfig)
|
|
#define COMEDI_BUFINFO _IOWR(CIO, 14, struct comedi_bufinfo)
|
|
#define COMEDI_POLL _IO(CIO, 15)
|
|
#define COMEDI_SETRSUBD _IO(CIO, 16)
|
|
#define COMEDI_SETWSUBD _IO(CIO, 17)
|
|
|
|
/* structures */
|
|
|
|
/**
|
|
* struct comedi_insn - COMEDI instruction
|
|
* @insn: COMEDI instruction type (%INSN_xxx).
|
|
* @n: Length of @data[].
|
|
* @data: Pointer to data array operated on by the instruction.
|
|
* @subdev: Subdevice index.
|
|
* @chanspec: A packed "chanspec" value consisting of channel number,
|
|
* analog range index, analog reference type, and flags.
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_INSN ioctl, and indirectly with the
|
|
* %COMEDI_INSNLIST ioctl.
|
|
*/
|
|
struct comedi_insn {
|
|
unsigned int insn;
|
|
unsigned int n;
|
|
unsigned int __user *data;
|
|
unsigned int subdev;
|
|
unsigned int chanspec;
|
|
unsigned int unused[3];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_insnlist - list of COMEDI instructions
|
|
* @n_insns: Number of COMEDI instructions.
|
|
* @insns: Pointer to array COMEDI instructions.
|
|
*
|
|
* This is used with the %COMEDI_INSNLIST ioctl.
|
|
*/
|
|
struct comedi_insnlist {
|
|
unsigned int n_insns;
|
|
struct comedi_insn __user *insns;
|
|
};
|
|
|
|
/**
|
|
* struct comedi_cmd - COMEDI asynchronous acquisition command details
|
|
* @subdev: Subdevice index.
|
|
* @flags: Command flags (%CMDF_xxx).
|
|
* @start_src: "Start acquisition" trigger source (%TRIG_xxx).
|
|
* @start_arg: "Start acquisition" trigger argument.
|
|
* @scan_begin_src: "Scan begin" trigger source.
|
|
* @scan_begin_arg: "Scan begin" trigger argument.
|
|
* @convert_src: "Convert" trigger source.
|
|
* @convert_arg: "Convert" trigger argument.
|
|
* @scan_end_src: "Scan end" trigger source.
|
|
* @scan_end_arg: "Scan end" trigger argument.
|
|
* @stop_src: "Stop acquisition" trigger source.
|
|
* @stop_arg: "Stop acquisition" trigger argument.
|
|
* @chanlist: Pointer to array of "chanspec" values, containing a
|
|
* sequence of channel numbers packed with analog range
|
|
* index, etc.
|
|
* @chanlist_len: Number of channels in sequence.
|
|
* @data: Pointer to miscellaneous set-up data (not used).
|
|
* @data_len: Length of miscellaneous set-up data.
|
|
*
|
|
* This is used with the %COMEDI_CMD or %COMEDI_CMDTEST ioctl to set-up
|
|
* or validate an asynchronous acquisition command. The ioctl may modify
|
|
* the &struct comedi_cmd and copy it back to the caller.
|
|
*
|
|
* Optional command @flags values that can be ORed together...
|
|
*
|
|
* %CMDF_BOGUS - makes %COMEDI_CMD ioctl return error %EAGAIN instead of
|
|
* starting the command.
|
|
*
|
|
* %CMDF_PRIORITY - requests "hard real-time" processing (which is not
|
|
* supported in this version of COMEDI).
|
|
*
|
|
* %CMDF_WAKE_EOS - requests the command makes data available for reading
|
|
* after every "scan" period.
|
|
*
|
|
* %CMDF_WRITE - marks the command as being in the "write" (to device)
|
|
* direction. This does not need to be specified by the caller unless the
|
|
* subdevice supports commands in either direction.
|
|
*
|
|
* %CMDF_RAWDATA - prevents the command from "munging" the data between the
|
|
* COMEDI sample format and the raw hardware sample format.
|
|
*
|
|
* %CMDF_ROUND_NEAREST - requests timing periods to be rounded to nearest
|
|
* supported values.
|
|
*
|
|
* %CMDF_ROUND_DOWN - requests timing periods to be rounded down to supported
|
|
* values (frequencies rounded up).
|
|
*
|
|
* %CMDF_ROUND_UP - requests timing periods to be rounded up to supported
|
|
* values (frequencies rounded down).
|
|
*
|
|
* Trigger source values for @start_src, @scan_begin_src, @convert_src,
|
|
* @scan_end_src, and @stop_src...
|
|
*
|
|
* %TRIG_ANY - "all ones" value used to test which trigger sources are
|
|
* supported.
|
|
*
|
|
* %TRIG_INVALID - "all zeroes" value used to indicate that all requested
|
|
* trigger sources are invalid.
|
|
*
|
|
* %TRIG_NONE - never trigger (often used as a @stop_src value).
|
|
*
|
|
* %TRIG_NOW - trigger after '_arg' nanoseconds.
|
|
*
|
|
* %TRIG_FOLLOW - trigger follows another event.
|
|
*
|
|
* %TRIG_TIMER - trigger every '_arg' nanoseconds.
|
|
*
|
|
* %TRIG_COUNT - trigger when count '_arg' is reached.
|
|
*
|
|
* %TRIG_EXT - trigger on external signal specified by '_arg'.
|
|
*
|
|
* %TRIG_INT - trigger on internal, software trigger specified by '_arg'.
|
|
*
|
|
* %TRIG_OTHER - trigger on other, driver-defined signal specified by '_arg'.
|
|
*/
|
|
struct comedi_cmd {
|
|
unsigned int subdev;
|
|
unsigned int flags;
|
|
|
|
unsigned int start_src;
|
|
unsigned int start_arg;
|
|
|
|
unsigned int scan_begin_src;
|
|
unsigned int scan_begin_arg;
|
|
|
|
unsigned int convert_src;
|
|
unsigned int convert_arg;
|
|
|
|
unsigned int scan_end_src;
|
|
unsigned int scan_end_arg;
|
|
|
|
unsigned int stop_src;
|
|
unsigned int stop_arg;
|
|
|
|
unsigned int *chanlist;
|
|
unsigned int chanlist_len;
|
|
|
|
short __user *data;
|
|
unsigned int data_len;
|
|
};
|
|
|
|
/**
|
|
* struct comedi_chaninfo - used to retrieve per-channel information
|
|
* @subdev: Subdevice index.
|
|
* @maxdata_list: Optional pointer to per-channel maximum data values.
|
|
* @flaglist: Optional pointer to per-channel flags.
|
|
* @rangelist: Optional pointer to per-channel range types.
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_CHANINFO ioctl to get per-channel information
|
|
* for the subdevice. Use of this requires knowledge of the number of channels
|
|
* and subdevice flags obtained using the %COMEDI_SUBDINFO ioctl.
|
|
*
|
|
* The @maxdata_list member must be %NULL unless the %SDF_MAXDATA subdevice
|
|
* flag is set. The @flaglist member must be %NULL unless the %SDF_FLAGS
|
|
* subdevice flag is set. The @rangelist member must be %NULL unless the
|
|
* %SDF_RANGETYPE subdevice flag is set. Otherwise, the arrays they point to
|
|
* must be at least as long as the number of channels.
|
|
*/
|
|
struct comedi_chaninfo {
|
|
unsigned int subdev;
|
|
unsigned int __user *maxdata_list;
|
|
unsigned int __user *flaglist;
|
|
unsigned int __user *rangelist;
|
|
unsigned int unused[4];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_rangeinfo - used to retrieve the range table for a channel
|
|
* @range_type: Encodes subdevice index (bits 27:24), channel index
|
|
* (bits 23:16) and range table length (bits 15:0).
|
|
* @range_ptr: Pointer to array of @struct comedi_krange to be filled
|
|
* in with the range table for the channel or subdevice.
|
|
*
|
|
* This is used with the %COMEDI_RANGEINFO ioctl to retrieve the range table
|
|
* for a specific channel (if the subdevice has the %SDF_RANGETYPE flag set to
|
|
* indicate that the range table depends on the channel), or for the subdevice
|
|
* as a whole (if the %SDF_RANGETYPE flag is clear, indicating the range table
|
|
* is shared by all channels).
|
|
*
|
|
* The @range_type value is an input to the ioctl and comes from a previous
|
|
* use of the %COMEDI_SUBDINFO ioctl (if the %SDF_RANGETYPE flag is clear),
|
|
* or the %COMEDI_CHANINFO ioctl (if the %SDF_RANGETYPE flag is set).
|
|
*/
|
|
struct comedi_rangeinfo {
|
|
unsigned int range_type;
|
|
void __user *range_ptr;
|
|
};
|
|
|
|
/**
|
|
* struct comedi_krange - describes a range in a range table
|
|
* @min: Minimum value in millionths (1e-6) of a unit.
|
|
* @max: Maximum value in millionths (1e-6) of a unit.
|
|
* @flags: Indicates the units (in bits 7:0) OR'ed with optional flags.
|
|
*
|
|
* A range table is associated with a single channel, or with all channels in a
|
|
* subdevice, and a list of one or more ranges. A %struct comedi_krange
|
|
* describes the physical range of units for one of those ranges. Sample
|
|
* values in COMEDI are unsigned from %0 up to some 'maxdata' value. The
|
|
* mapping from sample values to physical units is assumed to be nomimally
|
|
* linear (for the purpose of describing the range), with sample value %0
|
|
* mapping to @min, and the 'maxdata' sample value mapping to @max.
|
|
*
|
|
* The currently defined units are %UNIT_volt (%0), %UNIT_mA (%1), and
|
|
* %UNIT_none (%2). The @min and @max values are the physical range multiplied
|
|
* by 1e6, so a @max value of %1000000 (with %UNIT_volt) represents a maximal
|
|
* value of 1 volt.
|
|
*
|
|
* The only defined flag value is %RF_EXTERNAL (%0x100), indicating that the
|
|
* range needs to be multiplied by an external reference.
|
|
*/
|
|
struct comedi_krange {
|
|
int min;
|
|
int max;
|
|
unsigned int flags;
|
|
};
|
|
|
|
/**
|
|
* struct comedi_subdinfo - used to retrieve information about a subdevice
|
|
* @type: Type of subdevice from &enum comedi_subdevice_type.
|
|
* @n_chan: Number of channels the subdevice supports.
|
|
* @subd_flags: A mixture of static and dynamic flags describing
|
|
* aspects of the subdevice and its current state.
|
|
* @timer_type: Timer type. Always set to %5 ("nanosecond timer").
|
|
* @len_chanlist: Maximum length of a channel list if the subdevice
|
|
* supports asynchronous acquisition commands.
|
|
* @maxdata: Maximum sample value for all channels if the
|
|
* %SDF_MAXDATA subdevice flag is clear.
|
|
* @flags: Channel flags for all channels if the %SDF_FLAGS
|
|
* subdevice flag is clear.
|
|
* @range_type: The range type for all channels if the %SDF_RANGETYPE
|
|
* subdevice flag is clear. Encodes the subdevice index
|
|
* (bits 27:24), a dummy channel index %0 (bits 23:16),
|
|
* and the range table length (bits 15:0).
|
|
* @settling_time_0: Not used.
|
|
* @insn_bits_support: Set to %COMEDI_SUPPORTED if the subdevice supports the
|
|
* %INSN_BITS instruction, or to %COMEDI_UNSUPPORTED if it
|
|
* does not.
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_SUBDINFO ioctl which copies an array of
|
|
* &struct comedi_subdinfo back to user space, with one element per subdevice.
|
|
* Use of this requires knowledge of the number of subdevices obtained from
|
|
* the %COMEDI_DEVINFO ioctl.
|
|
*
|
|
* These are the @subd_flags values that may be ORed together...
|
|
*
|
|
* %SDF_BUSY - the subdevice is busy processing an asynchronous command or a
|
|
* synchronous instruction.
|
|
*
|
|
* %SDF_BUSY_OWNER - the subdevice is busy processing an asynchronous
|
|
* acquisition command started on the current file object (the file object
|
|
* issuing the %COMEDI_SUBDINFO ioctl).
|
|
*
|
|
* %SDF_LOCKED - the subdevice is locked by a %COMEDI_LOCK ioctl.
|
|
*
|
|
* %SDF_LOCK_OWNER - the subdevice is locked by a %COMEDI_LOCK ioctl from the
|
|
* current file object.
|
|
*
|
|
* %SDF_MAXDATA - maximum sample values are channel-specific.
|
|
*
|
|
* %SDF_FLAGS - channel flags are channel-specific.
|
|
*
|
|
* %SDF_RANGETYPE - range types are channel-specific.
|
|
*
|
|
* %SDF_PWM_COUNTER - PWM can switch off automatically.
|
|
*
|
|
* %SDF_PWM_HBRIDGE - or PWM is signed (H-bridge).
|
|
*
|
|
* %SDF_CMD - the subdevice supports asynchronous commands.
|
|
*
|
|
* %SDF_SOFT_CALIBRATED - the subdevice uses software calibration.
|
|
*
|
|
* %SDF_CMD_WRITE - the subdevice supports asynchronous commands in the output
|
|
* ("write") direction.
|
|
*
|
|
* %SDF_CMD_READ - the subdevice supports asynchronous commands in the input
|
|
* ("read") direction.
|
|
*
|
|
* %SDF_READABLE - the subdevice is readable (e.g. analog input).
|
|
*
|
|
* %SDF_WRITABLE (aliased as %SDF_WRITEABLE) - the subdevice is writable (e.g.
|
|
* analog output).
|
|
*
|
|
* %SDF_INTERNAL - the subdevice has no externally visible lines.
|
|
*
|
|
* %SDF_GROUND - the subdevice can use ground as an analog reference.
|
|
*
|
|
* %SDF_COMMON - the subdevice can use a common analog reference.
|
|
*
|
|
* %SDF_DIFF - the subdevice can use differential inputs (or outputs).
|
|
*
|
|
* %SDF_OTHER - the subdevice can use some other analog reference.
|
|
*
|
|
* %SDF_DITHER - the subdevice can do dithering.
|
|
*
|
|
* %SDF_DEGLITCH - the subdevice can do deglitching.
|
|
*
|
|
* %SDF_MMAP - this is never set.
|
|
*
|
|
* %SDF_RUNNING - an asynchronous command is still running.
|
|
*
|
|
* %SDF_LSAMPL - the subdevice uses "long" (32-bit) samples (for asynchronous
|
|
* command data).
|
|
*
|
|
* %SDF_PACKED - the subdevice packs several DIO samples into a single sample
|
|
* (for asynchronous command data).
|
|
*
|
|
* No "channel flags" (@flags) values are currently defined.
|
|
*/
|
|
struct comedi_subdinfo {
|
|
unsigned int type;
|
|
unsigned int n_chan;
|
|
unsigned int subd_flags;
|
|
unsigned int timer_type;
|
|
unsigned int len_chanlist;
|
|
unsigned int maxdata;
|
|
unsigned int flags;
|
|
unsigned int range_type;
|
|
unsigned int settling_time_0;
|
|
unsigned int insn_bits_support;
|
|
unsigned int unused[8];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_devinfo - used to retrieve information about a COMEDI device
|
|
* @version_code: COMEDI version code.
|
|
* @n_subdevs: Number of subdevices the device has.
|
|
* @driver_name: Null-terminated COMEDI driver name.
|
|
* @board_name: Null-terminated COMEDI board name.
|
|
* @read_subdevice: Index of the current "read" subdevice (%-1 if none).
|
|
* @write_subdevice: Index of the current "write" subdevice (%-1 if none).
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_DEVINFO ioctl to get basic information about
|
|
* the device.
|
|
*/
|
|
struct comedi_devinfo {
|
|
unsigned int version_code;
|
|
unsigned int n_subdevs;
|
|
char driver_name[COMEDI_NAMELEN];
|
|
char board_name[COMEDI_NAMELEN];
|
|
int read_subdevice;
|
|
int write_subdevice;
|
|
int unused[30];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_devconfig - used to configure a legacy COMEDI device
|
|
* @board_name: Null-terminated string specifying the type of board
|
|
* to configure.
|
|
* @options: An array of integer configuration options.
|
|
*
|
|
* This is used with the %COMEDI_DEVCONFIG ioctl to configure a "legacy" COMEDI
|
|
* device, such as an ISA card. Not all COMEDI drivers support this. Those
|
|
* that do either expect the specified board name to match one of a list of
|
|
* names registered with the COMEDI core, or expect the specified board name
|
|
* to match the COMEDI driver name itself. The configuration options are
|
|
* handled in a driver-specific manner.
|
|
*/
|
|
struct comedi_devconfig {
|
|
char board_name[COMEDI_NAMELEN];
|
|
int options[COMEDI_NDEVCONFOPTS];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_bufconfig - used to set or get buffer size for a subdevice
|
|
* @subdevice: Subdevice index.
|
|
* @flags: Not used.
|
|
* @maximum_size: Maximum allowed buffer size.
|
|
* @size: Buffer size.
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_BUFCONFIG ioctl to get or configure the
|
|
* maximum buffer size and current buffer size for a COMEDI subdevice that
|
|
* supports asynchronous commands. If the subdevice does not support
|
|
* asynchronous commands, @maximum_size and @size are ignored and set to 0.
|
|
*
|
|
* On ioctl input, non-zero values of @maximum_size and @size specify a
|
|
* new maximum size and new current size (in bytes), respectively. These
|
|
* will by rounded up to a multiple of %PAGE_SIZE. Specifying a new maximum
|
|
* size requires admin capabilities.
|
|
*
|
|
* On ioctl output, @maximum_size and @size and set to the current maximum
|
|
* buffer size and current buffer size, respectively.
|
|
*/
|
|
struct comedi_bufconfig {
|
|
unsigned int subdevice;
|
|
unsigned int flags;
|
|
|
|
unsigned int maximum_size;
|
|
unsigned int size;
|
|
|
|
unsigned int unused[4];
|
|
};
|
|
|
|
/**
|
|
* struct comedi_bufinfo - used to manipulate buffer position for a subdevice
|
|
* @subdevice: Subdevice index.
|
|
* @bytes_read: Specify amount to advance read position for an
|
|
* asynchronous command in the input ("read") direction.
|
|
* @buf_write_ptr: Current write position (index) within the buffer.
|
|
* @buf_read_ptr: Current read position (index) within the buffer.
|
|
* @buf_write_count: Total amount written, modulo 2^32.
|
|
* @buf_read_count: Total amount read, modulo 2^32.
|
|
* @bytes_written: Specify amount to advance write position for an
|
|
* asynchronous command in the output ("write") direction.
|
|
* @unused: Reserved for future use.
|
|
*
|
|
* This is used with the %COMEDI_BUFINFO ioctl to optionally advance the
|
|
* current read or write position in an asynchronous acquisition data buffer,
|
|
* and to get the current read and write positions in the buffer.
|
|
*/
|
|
struct comedi_bufinfo {
|
|
unsigned int subdevice;
|
|
unsigned int bytes_read;
|
|
|
|
unsigned int buf_write_ptr;
|
|
unsigned int buf_read_ptr;
|
|
unsigned int buf_write_count;
|
|
unsigned int buf_read_count;
|
|
|
|
unsigned int bytes_written;
|
|
|
|
unsigned int unused[4];
|
|
};
|
|
|
|
/* range stuff */
|
|
|
|
#define __RANGE(a, b) ((((a) & 0xffff) << 16) | ((b) & 0xffff))
|
|
|
|
#define RANGE_OFFSET(a) (((a) >> 16) & 0xffff)
|
|
#define RANGE_LENGTH(b) ((b) & 0xffff)
|
|
|
|
#define RF_UNIT(flags) ((flags) & 0xff)
|
|
#define RF_EXTERNAL 0x100
|
|
|
|
#define UNIT_volt 0
|
|
#define UNIT_mA 1
|
|
#define UNIT_none 2
|
|
|
|
#define COMEDI_MIN_SPEED 0xffffffffu
|
|
|
|
/**********************************************************/
|
|
/* everything after this line is ALPHA */
|
|
/**********************************************************/
|
|
|
|
/*
|
|
* 8254 specific configuration.
|
|
*
|
|
* It supports two config commands:
|
|
*
|
|
* 0 ID: INSN_CONFIG_SET_COUNTER_MODE
|
|
* 1 8254 Mode
|
|
* I8254_MODE0, I8254_MODE1, ..., I8254_MODE5
|
|
* OR'ed with:
|
|
* I8254_BCD, I8254_BINARY
|
|
*
|
|
* 0 ID: INSN_CONFIG_8254_READ_STATUS
|
|
* 1 <-- Status byte returned here.
|
|
* B7 = Output
|
|
* B6 = NULL Count
|
|
* B5 - B0 Current mode.
|
|
*/
|
|
|
|
enum i8254_mode {
|
|
I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */
|
|
I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */
|
|
I8254_MODE2 = (2 << 1), /* Rate generator */
|
|
I8254_MODE3 = (3 << 1), /* Square wave mode */
|
|
I8254_MODE4 = (4 << 1), /* Software triggered strobe */
|
|
/* Hardware triggered strobe (retriggerable) */
|
|
I8254_MODE5 = (5 << 1),
|
|
/* Use binary-coded decimal instead of binary (pretty useless) */
|
|
I8254_BCD = 1,
|
|
I8254_BINARY = 0
|
|
};
|
|
|
|
/* *** BEGIN GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
|
|
|
|
/*
|
|
* Common National Instruments Terminal/Signal names.
|
|
* Some of these have no NI_ prefix as they are useful for non-NI hardware, such
|
|
* as those that utilize the PXI/RTSI trigger lines.
|
|
*
|
|
* NOTE ABOUT THE CHOICE OF NAMES HERE AND THE CAMELSCRIPT:
|
|
* The choice to use CamelScript and the exact names below is for
|
|
* maintainability, clarity, similarity to manufacturer's documentation,
|
|
* _and_ a mitigation for confusion that has plagued the use of these drivers
|
|
* for years!
|
|
*
|
|
* More detail:
|
|
* There have been significant confusions over the past many years for users
|
|
* when trying to understand how to connect to/from signals and terminals on
|
|
* NI hardware using comedi. The major reason for this is that the actual
|
|
* register values were exposed and required to be used by users. Several
|
|
* major reasons exist why this caused major confusion for users:
|
|
* 1) The register values are _NOT_ in user documentation, but rather in
|
|
* arcane locations, such as a few register programming manuals that are
|
|
* increasingly hard to find and the NI MHDDK (comments in example code).
|
|
* There is no one place to find the various valid values of the registers.
|
|
* 2) The register values are _NOT_ completely consistent. There is no way to
|
|
* gain any sense of intuition of which values, or even enums one should use
|
|
* for various registers. There was some attempt in prior use of comedi to
|
|
* name enums such that a user might know which enums should be used for
|
|
* varying purposes, but the end-user had to gain a knowledge of register
|
|
* values to correctly wield this approach.
|
|
* 3) The names for signals and registers found in the various register level
|
|
* programming manuals and vendor-provided documentation are _not_ even
|
|
* close to the same names that are in the end-user documentation.
|
|
*
|
|
* Similar, albeit less, confusion plagued NI's previous version of their own
|
|
* drivers. Earlier than 2003, NI greatly simplified the situation for users
|
|
* by releasing a new API that abstracted the names of signals/terminals to a
|
|
* common and intuitive set of names.
|
|
*
|
|
* The names below mirror the names chosen and well documented by NI. These
|
|
* names are exposed to the user via the comedilib user library. By keeping
|
|
* the names below, in spite of the use of CamelScript, maintenance will be
|
|
* greatly eased and confusion for users _and_ comedi developers will be
|
|
* greatly reduced.
|
|
*/
|
|
|
|
/*
|
|
* Base of abstracted NI names.
|
|
* The first 16 bits of *_arg are reserved for channel selection.
|
|
* Since we only actually need the first 4 or 5 bits for all register values on
|
|
* NI select registers anyways, we'll identify all values >= (1<<15) as being an
|
|
* abstracted NI signal/terminal name.
|
|
* These values are also used/returned by INSN_DEVICE_CONFIG_TEST_ROUTE,
|
|
* INSN_DEVICE_CONFIG_CONNECT_ROUTE, INSN_DEVICE_CONFIG_DISCONNECT_ROUTE,
|
|
* and INSN_DEVICE_CONFIG_GET_ROUTES.
|
|
*/
|
|
#define NI_NAMES_BASE 0x8000u
|
|
|
|
#define _TERM_N(base, n, x) ((base) + ((x) & ((n) - 1)))
|
|
|
|
/*
|
|
* not necessarily all allowed 64 PFIs are valid--certainly not for all devices
|
|
*/
|
|
#define NI_PFI(x) _TERM_N(NI_NAMES_BASE, 64, x)
|
|
/* 8 trigger lines by standard, Some devices cannot talk to all eight. */
|
|
#define TRIGGER_LINE(x) _TERM_N(NI_PFI(-1) + 1, 8, x)
|
|
/* 4 RTSI shared MUXes to route signals to/from TRIGGER_LINES on NI hardware */
|
|
#define NI_RTSI_BRD(x) _TERM_N(TRIGGER_LINE(-1) + 1, 4, x)
|
|
|
|
/* *** Counter/timer names : 8 counters max *** */
|
|
#define NI_MAX_COUNTERS 8
|
|
#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1)
|
|
#define NI_CtrSource(x) _TERM_N(NI_COUNTER_NAMES_BASE, NI_MAX_COUNTERS, x)
|
|
/* Gate, Aux, A,B,Z are all treated, at times as gates */
|
|
#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1)
|
|
#define NI_CtrGate(x) _TERM_N(NI_GATES_NAMES_BASE, NI_MAX_COUNTERS, x)
|
|
#define NI_CtrAux(x) _TERM_N(NI_CtrGate(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_CtrA(x) _TERM_N(NI_CtrAux(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_CtrB(x) _TERM_N(NI_CtrA(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_CtrZ(x) _TERM_N(NI_CtrB(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_GATES_NAMES_MAX NI_CtrZ(-1)
|
|
#define NI_CtrArmStartTrigger(x) _TERM_N(NI_CtrZ(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_CtrInternalOutput(x) \
|
|
_TERM_N(NI_CtrArmStartTrigger(-1) + 1, NI_MAX_COUNTERS, x)
|
|
/** external pin(s) labeled conveniently as Ctr<i>Out. */
|
|
#define NI_CtrOut(x) _TERM_N(NI_CtrInternalOutput(-1) + 1, NI_MAX_COUNTERS, x)
|
|
/** For Buffered sampling of ctr -- x series capability. */
|
|
#define NI_CtrSampleClock(x) _TERM_N(NI_CtrOut(-1) + 1, NI_MAX_COUNTERS, x)
|
|
#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1)
|
|
|
|
enum ni_common_signal_names {
|
|
/* PXI_Star: this is a non-NI-specific signal */
|
|
PXI_Star = NI_COUNTER_NAMES_MAX + 1,
|
|
PXI_Clk10,
|
|
PXIe_Clk100,
|
|
NI_AI_SampleClock,
|
|
NI_AI_SampleClockTimebase,
|
|
NI_AI_StartTrigger,
|
|
NI_AI_ReferenceTrigger,
|
|
NI_AI_ConvertClock,
|
|
NI_AI_ConvertClockTimebase,
|
|
NI_AI_PauseTrigger,
|
|
NI_AI_HoldCompleteEvent,
|
|
NI_AI_HoldComplete,
|
|
NI_AI_ExternalMUXClock,
|
|
NI_AI_STOP, /* pulse signal that occurs when a update is finished(?) */
|
|
NI_AO_SampleClock,
|
|
NI_AO_SampleClockTimebase,
|
|
NI_AO_StartTrigger,
|
|
NI_AO_PauseTrigger,
|
|
NI_DI_SampleClock,
|
|
NI_DI_SampleClockTimebase,
|
|
NI_DI_StartTrigger,
|
|
NI_DI_ReferenceTrigger,
|
|
NI_DI_PauseTrigger,
|
|
NI_DI_InputBufferFull,
|
|
NI_DI_ReadyForStartEvent,
|
|
NI_DI_ReadyForTransferEventBurst,
|
|
NI_DI_ReadyForTransferEventPipelined,
|
|
NI_DO_SampleClock,
|
|
NI_DO_SampleClockTimebase,
|
|
NI_DO_StartTrigger,
|
|
NI_DO_PauseTrigger,
|
|
NI_DO_OutputBufferFull,
|
|
NI_DO_DataActiveEvent,
|
|
NI_DO_ReadyForStartEvent,
|
|
NI_DO_ReadyForTransferEvent,
|
|
NI_MasterTimebase,
|
|
NI_20MHzTimebase,
|
|
NI_80MHzTimebase,
|
|
NI_100MHzTimebase,
|
|
NI_200MHzTimebase,
|
|
NI_100kHzTimebase,
|
|
NI_10MHzRefClock,
|
|
NI_FrequencyOutput,
|
|
NI_ChangeDetectionEvent,
|
|
NI_AnalogComparisonEvent,
|
|
NI_WatchdogExpiredEvent,
|
|
NI_WatchdogExpirationTrigger,
|
|
NI_SCXI_Trig1,
|
|
NI_LogicLow,
|
|
NI_LogicHigh,
|
|
NI_ExternalStrobe,
|
|
NI_PFI_DO,
|
|
NI_CaseGround,
|
|
/* special internal signal used as variable source for RTSI bus: */
|
|
NI_RGOUT0,
|
|
|
|
/* just a name to make the next more convenient, regardless of above */
|
|
_NI_NAMES_MAX_PLUS_1,
|
|
NI_NUM_NAMES = _NI_NAMES_MAX_PLUS_1 - NI_NAMES_BASE,
|
|
};
|
|
|
|
/* *** END GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
|
|
|
|
#define NI_USUAL_PFI_SELECT(x) (((x) < 10) ? (0x1 + (x)) : (0xb + (x)))
|
|
#define NI_USUAL_RTSI_SELECT(x) (((x) < 7) ? (0xb + (x)) : 0x1b)
|
|
|
|
/*
|
|
* mode bits for NI general-purpose counters, set with
|
|
* INSN_CONFIG_SET_COUNTER_MODE
|
|
*/
|
|
#define NI_GPCT_COUNTING_MODE_SHIFT 16
|
|
#define NI_GPCT_INDEX_PHASE_BITSHIFT 20
|
|
#define NI_GPCT_COUNTING_DIRECTION_SHIFT 24
|
|
enum ni_gpct_mode_bits {
|
|
NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4,
|
|
NI_GPCT_EDGE_GATE_MODE_MASK = 0x18,
|
|
NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0,
|
|
NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8,
|
|
NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10,
|
|
NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18,
|
|
NI_GPCT_STOP_MODE_MASK = 0x60,
|
|
NI_GPCT_STOP_ON_GATE_BITS = 0x00,
|
|
NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20,
|
|
NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40,
|
|
NI_GPCT_LOAD_B_SELECT_BIT = 0x80,
|
|
NI_GPCT_OUTPUT_MODE_MASK = 0x300,
|
|
NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100,
|
|
NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200,
|
|
NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300,
|
|
NI_GPCT_HARDWARE_DISARM_MASK = 0xc00,
|
|
NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000,
|
|
NI_GPCT_DISARM_AT_TC_BITS = 0x400,
|
|
NI_GPCT_DISARM_AT_GATE_BITS = 0x800,
|
|
NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00,
|
|
NI_GPCT_LOADING_ON_TC_BIT = 0x1000,
|
|
NI_GPCT_LOADING_ON_GATE_BIT = 0x4000,
|
|
NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_NORMAL_BITS =
|
|
0x0 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS =
|
|
0x1 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS =
|
|
0x2 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS =
|
|
0x3 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS =
|
|
0x4 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS =
|
|
0x6 << NI_GPCT_COUNTING_MODE_SHIFT,
|
|
NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
|
|
NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS =
|
|
0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT,
|
|
NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS =
|
|
0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT,
|
|
NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS =
|
|
0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT,
|
|
NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS =
|
|
0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
|
|
NI_GPCT_INDEX_ENABLE_BIT = 0x400000,
|
|
NI_GPCT_COUNTING_DIRECTION_MASK =
|
|
0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
|
|
NI_GPCT_COUNTING_DIRECTION_DOWN_BITS =
|
|
0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
|
|
NI_GPCT_COUNTING_DIRECTION_UP_BITS =
|
|
0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
|
|
NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS =
|
|
0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
|
|
NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS =
|
|
0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
|
|
NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000,
|
|
NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0,
|
|
NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000,
|
|
NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000,
|
|
NI_GPCT_OR_GATE_BIT = 0x10000000,
|
|
NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000
|
|
};
|
|
|
|
/*
|
|
* Bits for setting a clock source with
|
|
* INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters.
|
|
*/
|
|
enum ni_gpct_clock_source_bits {
|
|
NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f,
|
|
NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0,
|
|
NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1,
|
|
NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2,
|
|
NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3,
|
|
NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4,
|
|
NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5,
|
|
/* NI 660x-specific */
|
|
NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6,
|
|
NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7,
|
|
NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8,
|
|
NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9,
|
|
NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000,
|
|
NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0,
|
|
/* divide source by 2 */
|
|
NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000,
|
|
/* divide source by 8 */
|
|
NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000,
|
|
NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000
|
|
};
|
|
|
|
/* NI 660x-specific */
|
|
#define NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(x) (0x10 + (x))
|
|
|
|
#define NI_GPCT_RTSI_CLOCK_SRC_BITS(x) (0x18 + (x))
|
|
|
|
/* no pfi on NI 660x */
|
|
#define NI_GPCT_PFI_CLOCK_SRC_BITS(x) (0x20 + (x))
|
|
|
|
/*
|
|
* Possibilities for setting a gate source with
|
|
* INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters.
|
|
* May be bitwise-or'd with CR_EDGE or CR_INVERT.
|
|
*/
|
|
enum ni_gpct_gate_select {
|
|
/* m-series gates */
|
|
NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0,
|
|
NI_GPCT_AI_START2_GATE_SELECT = 0x12,
|
|
NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13,
|
|
NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14,
|
|
NI_GPCT_AI_START1_GATE_SELECT = 0x1c,
|
|
NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d,
|
|
NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e,
|
|
NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f,
|
|
/* more gates for 660x */
|
|
NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100,
|
|
NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101,
|
|
/* more gates for 660x "second gate" */
|
|
NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201,
|
|
NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e,
|
|
/*
|
|
* m-series "second gate" sources are unknown,
|
|
* we should add them here with an offset of 0x300 when
|
|
* known.
|
|
*/
|
|
NI_GPCT_DISABLED_GATE_SELECT = 0x8000,
|
|
};
|
|
|
|
#define NI_GPCT_GATE_PIN_GATE_SELECT(x) (0x102 + (x))
|
|
#define NI_GPCT_RTSI_GATE_SELECT(x) NI_USUAL_RTSI_SELECT(x)
|
|
#define NI_GPCT_PFI_GATE_SELECT(x) NI_USUAL_PFI_SELECT(x)
|
|
#define NI_GPCT_UP_DOWN_PIN_GATE_SELECT(x) (0x202 + (x))
|
|
|
|
/*
|
|
* Possibilities for setting a source with
|
|
* INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters.
|
|
*/
|
|
enum ni_gpct_other_index {
|
|
NI_GPCT_SOURCE_ENCODER_A,
|
|
NI_GPCT_SOURCE_ENCODER_B,
|
|
NI_GPCT_SOURCE_ENCODER_Z
|
|
};
|
|
|
|
enum ni_gpct_other_select {
|
|
/* m-series gates */
|
|
/* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */
|
|
NI_GPCT_DISABLED_OTHER_SELECT = 0x8000,
|
|
};
|
|
|
|
#define NI_GPCT_PFI_OTHER_SELECT(x) NI_USUAL_PFI_SELECT(x)
|
|
|
|
/*
|
|
* start sources for ni general-purpose counters for use with
|
|
* INSN_CONFIG_ARM
|
|
*/
|
|
enum ni_gpct_arm_source {
|
|
NI_GPCT_ARM_IMMEDIATE = 0x0,
|
|
/*
|
|
* Start both the counter and the adjacent paired counter simultaneously
|
|
*/
|
|
NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1,
|
|
/*
|
|
* If the NI_GPCT_HW_ARM bit is set, we will pass the least significant
|
|
* bits (3 bits for 660x or 5 bits for m-series) through to the
|
|
* hardware. To select a hardware trigger, pass the appropriate select
|
|
* bit, e.g.,
|
|
* NI_GPCT_HW_ARM | NI_GPCT_AI_START1_GATE_SELECT or
|
|
* NI_GPCT_HW_ARM | NI_GPCT_PFI_GATE_SELECT(pfi_number)
|
|
*/
|
|
NI_GPCT_HW_ARM = 0x1000,
|
|
NI_GPCT_ARM_UNKNOWN = NI_GPCT_HW_ARM, /* for backward compatibility */
|
|
};
|
|
|
|
/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */
|
|
enum ni_gpct_filter_select {
|
|
NI_GPCT_FILTER_OFF = 0x0,
|
|
NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1,
|
|
NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2,
|
|
NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3,
|
|
NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4,
|
|
NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5,
|
|
NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6
|
|
};
|
|
|
|
/*
|
|
* PFI digital filtering options for ni m-series for use with
|
|
* INSN_CONFIG_FILTER.
|
|
*/
|
|
enum ni_pfi_filter_select {
|
|
NI_PFI_FILTER_OFF = 0x0,
|
|
NI_PFI_FILTER_125ns = 0x1,
|
|
NI_PFI_FILTER_6425ns = 0x2,
|
|
NI_PFI_FILTER_2550us = 0x3
|
|
};
|
|
|
|
/* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */
|
|
enum ni_mio_clock_source {
|
|
NI_MIO_INTERNAL_CLOCK = 0,
|
|
/*
|
|
* Doesn't work for m-series, use NI_MIO_PLL_RTSI_CLOCK()
|
|
* the NI_MIO_PLL_* sources are m-series only
|
|
*/
|
|
NI_MIO_RTSI_CLOCK = 1,
|
|
NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2,
|
|
NI_MIO_PLL_PXI10_CLOCK = 3,
|
|
NI_MIO_PLL_RTSI0_CLOCK = 4
|
|
};
|
|
|
|
#define NI_MIO_PLL_RTSI_CLOCK(x) (NI_MIO_PLL_RTSI0_CLOCK + (x))
|
|
|
|
/*
|
|
* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING.
|
|
* The numbers assigned are not arbitrary, they correspond to the bits required
|
|
* to program the board.
|
|
*/
|
|
enum ni_rtsi_routing {
|
|
NI_RTSI_OUTPUT_ADR_START1 = 0,
|
|
NI_RTSI_OUTPUT_ADR_START2 = 1,
|
|
NI_RTSI_OUTPUT_SCLKG = 2,
|
|
NI_RTSI_OUTPUT_DACUPDN = 3,
|
|
NI_RTSI_OUTPUT_DA_START1 = 4,
|
|
NI_RTSI_OUTPUT_G_SRC0 = 5,
|
|
NI_RTSI_OUTPUT_G_GATE0 = 6,
|
|
NI_RTSI_OUTPUT_RGOUT0 = 7,
|
|
NI_RTSI_OUTPUT_RTSI_BRD_0 = 8,
|
|
/* Pre-m-series always have RTSI clock on line 7 */
|
|
NI_RTSI_OUTPUT_RTSI_OSC = 12
|
|
};
|
|
|
|
#define NI_RTSI_OUTPUT_RTSI_BRD(x) (NI_RTSI_OUTPUT_RTSI_BRD_0 + (x))
|
|
|
|
/*
|
|
* Signals which can be routed to an NI PFI pin on an m-series board with
|
|
* INSN_CONFIG_SET_ROUTING. These numbers are also returned by
|
|
* INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing
|
|
* cannot be changed. The numbers assigned are not arbitrary, they correspond
|
|
* to the bits required to program the board.
|
|
*/
|
|
enum ni_pfi_routing {
|
|
NI_PFI_OUTPUT_PFI_DEFAULT = 0,
|
|
NI_PFI_OUTPUT_AI_START1 = 1,
|
|
NI_PFI_OUTPUT_AI_START2 = 2,
|
|
NI_PFI_OUTPUT_AI_CONVERT = 3,
|
|
NI_PFI_OUTPUT_G_SRC1 = 4,
|
|
NI_PFI_OUTPUT_G_GATE1 = 5,
|
|
NI_PFI_OUTPUT_AO_UPDATE_N = 6,
|
|
NI_PFI_OUTPUT_AO_START1 = 7,
|
|
NI_PFI_OUTPUT_AI_START_PULSE = 8,
|
|
NI_PFI_OUTPUT_G_SRC0 = 9,
|
|
NI_PFI_OUTPUT_G_GATE0 = 10,
|
|
NI_PFI_OUTPUT_EXT_STROBE = 11,
|
|
NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12,
|
|
NI_PFI_OUTPUT_GOUT0 = 13,
|
|
NI_PFI_OUTPUT_GOUT1 = 14,
|
|
NI_PFI_OUTPUT_FREQ_OUT = 15,
|
|
NI_PFI_OUTPUT_PFI_DO = 16,
|
|
NI_PFI_OUTPUT_I_ATRIG = 17,
|
|
NI_PFI_OUTPUT_RTSI0 = 18,
|
|
NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26,
|
|
NI_PFI_OUTPUT_SCXI_TRIG1 = 27,
|
|
NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28,
|
|
NI_PFI_OUTPUT_CDI_SAMPLE = 29,
|
|
NI_PFI_OUTPUT_CDO_UPDATE = 30
|
|
};
|
|
|
|
#define NI_PFI_OUTPUT_RTSI(x) (NI_PFI_OUTPUT_RTSI0 + (x))
|
|
|
|
/*
|
|
* Signals which can be routed to output on a NI PFI pin on a 660x board
|
|
* with INSN_CONFIG_SET_ROUTING. The numbers assigned are
|
|
* not arbitrary, they correspond to the bits required
|
|
* to program the board. Lines 0 to 7 can only be set to
|
|
* NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to
|
|
* NI_660X_PFI_OUTPUT_COUNTER.
|
|
*/
|
|
enum ni_660x_pfi_routing {
|
|
NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */
|
|
NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */
|
|
};
|
|
|
|
/*
|
|
* NI External Trigger lines. These values are not arbitrary, but are related
|
|
* to the bits required to program the board (offset by 1 for historical
|
|
* reasons).
|
|
*/
|
|
#define NI_EXT_PFI(x) (NI_USUAL_PFI_SELECT(x) - 1)
|
|
#define NI_EXT_RTSI(x) (NI_USUAL_RTSI_SELECT(x) - 1)
|
|
|
|
/*
|
|
* Clock sources for CDIO subdevice on NI m-series boards. Used as the
|
|
* scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd
|
|
* with CR_INVERT to change polarity.
|
|
*/
|
|
enum ni_m_series_cdio_scan_begin_src {
|
|
NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0,
|
|
NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18,
|
|
NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19,
|
|
NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20,
|
|
NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28,
|
|
NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29,
|
|
NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30,
|
|
NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31,
|
|
NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32,
|
|
NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33
|
|
};
|
|
|
|
#define NI_CDIO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
|
|
#define NI_CDIO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
|
|
|
|
/*
|
|
* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI
|
|
* boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to
|
|
* change polarity.
|
|
*/
|
|
#define NI_AO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
|
|
#define NI_AO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
|
|
|
|
/*
|
|
* Bits for setting a clock source with
|
|
* INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice.
|
|
*/
|
|
enum ni_freq_out_clock_source_bits {
|
|
NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */
|
|
NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */
|
|
};
|
|
|
|
/*
|
|
* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
|
|
* 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver).
|
|
*/
|
|
enum amplc_dio_clock_source {
|
|
/*
|
|
* Per channel external clock
|
|
* input/output pin (pin is only an
|
|
* input when clock source set to this value,
|
|
* otherwise it is an output)
|
|
*/
|
|
AMPLC_DIO_CLK_CLKN,
|
|
AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */
|
|
AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */
|
|
AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */
|
|
AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */
|
|
AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */
|
|
/*
|
|
* Output of preceding counter channel
|
|
* (for channel 0, preceding counter
|
|
* channel is channel 2 on preceding
|
|
* counter subdevice, for first counter
|
|
* subdevice, preceding counter
|
|
* subdevice is the last counter
|
|
* subdevice)
|
|
*/
|
|
AMPLC_DIO_CLK_OUTNM1,
|
|
AMPLC_DIO_CLK_EXT, /* per chip external input pin */
|
|
/* the following are "enhanced" clock sources for PCIe models */
|
|
AMPLC_DIO_CLK_VCC, /* clock input HIGH */
|
|
AMPLC_DIO_CLK_GND, /* clock input LOW */
|
|
AMPLC_DIO_CLK_PAT_PRESENT, /* "pattern present" signal */
|
|
AMPLC_DIO_CLK_20MHZ /* 20 MHz internal clock */
|
|
};
|
|
|
|
/*
|
|
* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
|
|
* timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver).
|
|
*/
|
|
enum amplc_dio_ts_clock_src {
|
|
AMPLC_DIO_TS_CLK_1GHZ, /* 1 ns period with 20 ns granularity */
|
|
AMPLC_DIO_TS_CLK_1MHZ, /* 1 us period */
|
|
AMPLC_DIO_TS_CLK_1KHZ /* 1 ms period */
|
|
};
|
|
|
|
/*
|
|
* Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for
|
|
* 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver).
|
|
*/
|
|
enum amplc_dio_gate_source {
|
|
AMPLC_DIO_GAT_VCC, /* internal high logic level */
|
|
AMPLC_DIO_GAT_GND, /* internal low logic level */
|
|
AMPLC_DIO_GAT_GATN, /* per channel external gate input */
|
|
/*
|
|
* negated output of counter channel minus 2
|
|
* (for channels 0 or 1, channel minus 2 is channel 1 or 2 on
|
|
* the preceding counter subdevice, for the first counter subdevice
|
|
* the preceding counter subdevice is the last counter subdevice)
|
|
*/
|
|
AMPLC_DIO_GAT_NOUTNM2,
|
|
AMPLC_DIO_GAT_RESERVED4,
|
|
AMPLC_DIO_GAT_RESERVED5,
|
|
AMPLC_DIO_GAT_RESERVED6,
|
|
AMPLC_DIO_GAT_RESERVED7,
|
|
/* the following are "enhanced" gate sources for PCIe models */
|
|
AMPLC_DIO_GAT_NGATN = 6, /* negated per channel gate input */
|
|
/* non-negated output of counter channel minus 2 */
|
|
AMPLC_DIO_GAT_OUTNM2,
|
|
AMPLC_DIO_GAT_PAT_PRESENT, /* "pattern present" signal */
|
|
AMPLC_DIO_GAT_PAT_OCCURRED, /* "pattern occurred" latched */
|
|
AMPLC_DIO_GAT_PAT_GONE, /* "pattern gone away" latched */
|
|
AMPLC_DIO_GAT_NPAT_PRESENT, /* negated "pattern present" */
|
|
AMPLC_DIO_GAT_NPAT_OCCURRED, /* negated "pattern occurred" */
|
|
AMPLC_DIO_GAT_NPAT_GONE /* negated "pattern gone away" */
|
|
};
|
|
|
|
/*
|
|
* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
|
|
* the counter subdevice on the Kolter Electronic PCI-Counter board
|
|
* (ke_counter driver).
|
|
*/
|
|
enum ke_counter_clock_source {
|
|
KE_CLK_20MHZ, /* internal 20MHz (default) */
|
|
KE_CLK_4MHZ, /* internal 4MHz (option) */
|
|
KE_CLK_EXT /* external clock on pin 21 of D-Sub */
|
|
};
|
|
|
|
#endif /* _COMEDI_H */
|