331 lines
8.6 KiB
C
331 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
|
|
*
|
|
* Copyright (C) Nokia Corporation
|
|
*
|
|
* Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/tpa6130a2-plat.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/tlv.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "tpa6130a2.h"
|
|
|
|
enum tpa_model {
|
|
TPA6130A2,
|
|
TPA6140A2,
|
|
};
|
|
|
|
/* This struct is used to save the context */
|
|
struct tpa6130a2_data {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct regulator *supply;
|
|
int power_gpio;
|
|
enum tpa_model id;
|
|
};
|
|
|
|
static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable)
|
|
{
|
|
int ret = 0, ret2;
|
|
|
|
if (enable) {
|
|
ret = regulator_enable(data->supply);
|
|
if (ret != 0) {
|
|
dev_err(data->dev,
|
|
"Failed to enable supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
/* Power on */
|
|
if (data->power_gpio >= 0)
|
|
gpio_set_value(data->power_gpio, 1);
|
|
|
|
/* Sync registers */
|
|
regcache_cache_only(data->regmap, false);
|
|
ret = regcache_sync(data->regmap);
|
|
if (ret != 0) {
|
|
dev_err(data->dev,
|
|
"Failed to sync registers: %d\n", ret);
|
|
regcache_cache_only(data->regmap, true);
|
|
if (data->power_gpio >= 0)
|
|
gpio_set_value(data->power_gpio, 0);
|
|
ret2 = regulator_disable(data->supply);
|
|
if (ret2 != 0)
|
|
dev_err(data->dev,
|
|
"Failed to disable supply: %d\n", ret2);
|
|
return ret;
|
|
}
|
|
} else {
|
|
/* Powered off device does not retain registers. While device
|
|
* is off, any register updates (i.e. volume changes) should
|
|
* happen in cache only.
|
|
*/
|
|
regcache_mark_dirty(data->regmap);
|
|
regcache_cache_only(data->regmap, true);
|
|
|
|
/* Power off */
|
|
if (data->power_gpio >= 0)
|
|
gpio_set_value(data->power_gpio, 0);
|
|
|
|
ret = regulator_disable(data->supply);
|
|
if (ret != 0) {
|
|
dev_err(data->dev,
|
|
"Failed to disable supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kctrl, int event)
|
|
{
|
|
struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
|
|
struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c);
|
|
|
|
if (SND_SOC_DAPM_EVENT_ON(event)) {
|
|
/* Before widget power up: turn chip on, sync registers */
|
|
return tpa6130a2_power(data, true);
|
|
} else {
|
|
/* After widget power down: turn chip off */
|
|
return tpa6130a2_power(data, false);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
|
|
* down in gain.
|
|
*/
|
|
static const DECLARE_TLV_DB_RANGE(tpa6130_tlv,
|
|
0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
|
|
2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
|
|
4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
|
|
6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
|
|
8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
|
|
10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
|
|
12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
|
|
14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
|
|
21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
|
|
38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0)
|
|
);
|
|
|
|
static const struct snd_kcontrol_new tpa6130a2_controls[] = {
|
|
SOC_SINGLE_TLV("Headphone Playback Volume",
|
|
TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
|
|
tpa6130_tlv),
|
|
};
|
|
|
|
static const DECLARE_TLV_DB_RANGE(tpa6140_tlv,
|
|
0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
|
|
9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
|
|
17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0)
|
|
);
|
|
|
|
static const struct snd_kcontrol_new tpa6140a2_controls[] = {
|
|
SOC_SINGLE_TLV("Headphone Playback Volume",
|
|
TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
|
|
tpa6140_tlv),
|
|
};
|
|
|
|
static int tpa6130a2_component_probe(struct snd_soc_component *component)
|
|
{
|
|
struct tpa6130a2_data *data = snd_soc_component_get_drvdata(component);
|
|
|
|
if (data->id == TPA6140A2)
|
|
return snd_soc_add_component_controls(component,
|
|
tpa6140a2_controls, ARRAY_SIZE(tpa6140a2_controls));
|
|
else
|
|
return snd_soc_add_component_controls(component,
|
|
tpa6130a2_controls, ARRAY_SIZE(tpa6130a2_controls));
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("LEFTIN"),
|
|
SND_SOC_DAPM_INPUT("RIGHTIN"),
|
|
SND_SOC_DAPM_OUTPUT("HPLEFT"),
|
|
SND_SOC_DAPM_OUTPUT("HPRIGHT"),
|
|
|
|
SND_SOC_DAPM_PGA("Left Mute", TPA6130A2_REG_VOL_MUTE,
|
|
TPA6130A2_HP_EN_L_SHIFT, 1, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Mute", TPA6130A2_REG_VOL_MUTE,
|
|
TPA6130A2_HP_EN_R_SHIFT, 1, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left PGA", TPA6130A2_REG_CONTROL,
|
|
TPA6130A2_HP_EN_L_SHIFT, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right PGA", TPA6130A2_REG_CONTROL,
|
|
TPA6130A2_HP_EN_R_SHIFT, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("Power", TPA6130A2_REG_CONTROL,
|
|
TPA6130A2_SWS_SHIFT, 1, tpa6130a2_power_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tpa6130a2_dapm_routes[] = {
|
|
{ "Left PGA", NULL, "LEFTIN" },
|
|
{ "Right PGA", NULL, "RIGHTIN" },
|
|
|
|
{ "Left Mute", NULL, "Left PGA" },
|
|
{ "Right Mute", NULL, "Right PGA" },
|
|
|
|
{ "HPLEFT", NULL, "Left Mute" },
|
|
{ "HPRIGHT", NULL, "Right Mute" },
|
|
|
|
{ "Left PGA", NULL, "Power" },
|
|
{ "Right PGA", NULL, "Power" },
|
|
};
|
|
|
|
static const struct snd_soc_component_driver tpa6130a2_component_driver = {
|
|
.name = "tpa6130a2",
|
|
.probe = tpa6130a2_component_probe,
|
|
.dapm_widgets = tpa6130a2_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(tpa6130a2_dapm_widgets),
|
|
.dapm_routes = tpa6130a2_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(tpa6130a2_dapm_routes),
|
|
};
|
|
|
|
static const struct reg_default tpa6130a2_reg_defaults[] = {
|
|
{ TPA6130A2_REG_CONTROL, TPA6130A2_SWS },
|
|
{ TPA6130A2_REG_VOL_MUTE, TPA6130A2_MUTE_R | TPA6130A2_MUTE_L },
|
|
};
|
|
|
|
static const struct regmap_config tpa6130a2_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = TPA6130A2_REG_VERSION,
|
|
.reg_defaults = tpa6130a2_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(tpa6130a2_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct i2c_device_id tpa6130a2_id[] = {
|
|
{ "tpa6130a2", TPA6130A2 },
|
|
{ "tpa6140a2", TPA6140A2 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
|
|
|
|
static int tpa6130a2_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev;
|
|
struct tpa6130a2_data *data;
|
|
struct tpa6130a2_platform_data *pdata = client->dev.platform_data;
|
|
struct device_node *np = client->dev.of_node;
|
|
const struct i2c_device_id *id;
|
|
const char *regulator;
|
|
unsigned int version;
|
|
int ret;
|
|
|
|
dev = &client->dev;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->dev = dev;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &tpa6130a2_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
if (pdata) {
|
|
data->power_gpio = pdata->power_gpio;
|
|
} else if (np) {
|
|
data->power_gpio = of_get_named_gpio(np, "power-gpio", 0);
|
|
} else {
|
|
dev_err(dev, "Platform data not set\n");
|
|
dump_stack();
|
|
return -ENODEV;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
|
|
id = i2c_match_id(tpa6130a2_id, client);
|
|
data->id = id->driver_data;
|
|
|
|
if (data->power_gpio >= 0) {
|
|
ret = devm_gpio_request(dev, data->power_gpio,
|
|
"tpa6130a2 enable");
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to request power GPIO (%d)\n",
|
|
data->power_gpio);
|
|
return ret;
|
|
}
|
|
gpio_direction_output(data->power_gpio, 0);
|
|
}
|
|
|
|
switch (data->id) {
|
|
default:
|
|
dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
|
|
data->id);
|
|
fallthrough;
|
|
case TPA6130A2:
|
|
regulator = "Vdd";
|
|
break;
|
|
case TPA6140A2:
|
|
regulator = "AVdd";
|
|
break;
|
|
}
|
|
|
|
data->supply = devm_regulator_get(dev, regulator);
|
|
if (IS_ERR(data->supply)) {
|
|
ret = PTR_ERR(data->supply);
|
|
dev_err(dev, "Failed to request supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = tpa6130a2_power(data, true);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
|
|
/* Read version */
|
|
regmap_read(data->regmap, TPA6130A2_REG_VERSION, &version);
|
|
version &= TPA6130A2_VERSION_MASK;
|
|
if ((version != 1) && (version != 2))
|
|
dev_warn(dev, "UNTESTED version detected (%d)\n", version);
|
|
|
|
/* Disable the chip */
|
|
ret = tpa6130a2_power(data, false);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
return devm_snd_soc_register_component(&client->dev,
|
|
&tpa6130a2_component_driver, NULL, 0);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id tpa6130a2_of_match[] = {
|
|
{ .compatible = "ti,tpa6130a2", },
|
|
{ .compatible = "ti,tpa6140a2" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tpa6130a2_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver tpa6130a2_i2c_driver = {
|
|
.driver = {
|
|
.name = "tpa6130a2",
|
|
.of_match_table = of_match_ptr(tpa6130a2_of_match),
|
|
},
|
|
.probe = tpa6130a2_probe,
|
|
.id_table = tpa6130a2_id,
|
|
};
|
|
|
|
module_i2c_driver(tpa6130a2_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
|
|
MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
|
|
MODULE_LICENSE("GPL");
|