356 lines
10 KiB
C
356 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright (c) 2020 BayLibre, SAS.
|
|
// Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dai.h>
|
|
|
|
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
|
#include "axg-tdm.h"
|
|
#include "meson-codec-glue.h"
|
|
|
|
#define G12A_TOACODEC_DRV_NAME "g12a-toacodec"
|
|
|
|
#define TOACODEC_CTRL0 0x0
|
|
#define CTRL0_ENABLE_SHIFT 31
|
|
#define CTRL0_DAT_SEL_SM1_MSB 19
|
|
#define CTRL0_DAT_SEL_SM1_LSB 18
|
|
#define CTRL0_DAT_SEL_MSB 15
|
|
#define CTRL0_DAT_SEL_LSB 14
|
|
#define CTRL0_LANE_SEL_SM1 16
|
|
#define CTRL0_LANE_SEL 12
|
|
#define CTRL0_LRCLK_SEL_SM1_MSB 14
|
|
#define CTRL0_LRCLK_SEL_SM1_LSB 12
|
|
#define CTRL0_LRCLK_SEL_MSB 9
|
|
#define CTRL0_LRCLK_SEL_LSB 8
|
|
#define CTRL0_LRCLK_INV_SM1 BIT(10)
|
|
#define CTRL0_BLK_CAP_INV_SM1 BIT(9)
|
|
#define CTRL0_BLK_CAP_INV BIT(7)
|
|
#define CTRL0_BCLK_O_INV_SM1 BIT(8)
|
|
#define CTRL0_BCLK_O_INV BIT(6)
|
|
#define CTRL0_BCLK_SEL_SM1_MSB 6
|
|
#define CTRL0_BCLK_SEL_MSB 5
|
|
#define CTRL0_BCLK_SEL_LSB 4
|
|
#define CTRL0_MCLK_SEL GENMASK(2, 0)
|
|
|
|
#define TOACODEC_OUT_CHMAX 2
|
|
|
|
struct g12a_toacodec {
|
|
struct regmap_field *field_dat_sel;
|
|
struct regmap_field *field_lrclk_sel;
|
|
struct regmap_field *field_bclk_sel;
|
|
};
|
|
|
|
struct g12a_toacodec_match_data {
|
|
const struct snd_soc_component_driver *component_drv;
|
|
struct reg_field field_dat_sel;
|
|
struct reg_field field_lrclk_sel;
|
|
struct reg_field field_bclk_sel;
|
|
};
|
|
|
|
static const char * const g12a_toacodec_mux_texts[] = {
|
|
"I2S A", "I2S B", "I2S C",
|
|
};
|
|
|
|
static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component =
|
|
snd_soc_dapm_kcontrol_component(kcontrol);
|
|
struct g12a_toacodec *priv = snd_soc_component_get_drvdata(component);
|
|
struct snd_soc_dapm_context *dapm =
|
|
snd_soc_dapm_kcontrol_dapm(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int mux, reg;
|
|
|
|
mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
|
|
regmap_field_read(priv->field_dat_sel, ®);
|
|
|
|
if (mux == reg)
|
|
return 0;
|
|
|
|
/* Force disconnect of the mux while updating */
|
|
snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
|
|
|
|
regmap_field_write(priv->field_dat_sel, mux);
|
|
regmap_field_write(priv->field_lrclk_sel, mux);
|
|
regmap_field_write(priv->field_bclk_sel, mux);
|
|
|
|
/*
|
|
* FIXME:
|
|
* On this soc, the glue gets the MCLK directly from the clock
|
|
* controller instead of going the through the TDM interface.
|
|
*
|
|
* Here we assume interface A uses clock A, etc ... While it is
|
|
* true for now, it could be different. Instead the glue should
|
|
* find out the clock used by the interface and select the same
|
|
* source. For that, we will need regmap backed clock mux which
|
|
* is a work in progress
|
|
*/
|
|
snd_soc_component_update_bits(component, e->reg,
|
|
CTRL0_MCLK_SEL,
|
|
FIELD_PREP(CTRL0_MCLK_SEL, mux));
|
|
|
|
snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
|
|
CTRL0_DAT_SEL_LSB,
|
|
g12a_toacodec_mux_texts);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(sm1_toacodec_mux_enum, TOACODEC_CTRL0,
|
|
CTRL0_DAT_SEL_SM1_LSB,
|
|
g12a_toacodec_mux_texts);
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_mux =
|
|
SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum,
|
|
snd_soc_dapm_get_enum_double,
|
|
g12a_toacodec_mux_put_enum);
|
|
|
|
static const struct snd_kcontrol_new sm1_toacodec_mux =
|
|
SOC_DAPM_ENUM_EXT("Source", sm1_toacodec_mux_enum,
|
|
snd_soc_dapm_get_enum_double,
|
|
g12a_toacodec_mux_put_enum);
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_out_enable =
|
|
SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
|
|
CTRL0_ENABLE_SHIFT, 1, 0);
|
|
|
|
static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
|
|
SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_mux),
|
|
SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_out_enable),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
|
|
SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
|
|
&sm1_toacodec_mux),
|
|
SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
|
|
&g12a_toacodec_out_enable),
|
|
};
|
|
|
|
static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct meson_codec_glue_input *data;
|
|
int ret;
|
|
|
|
ret = meson_codec_glue_input_hw_params(substream, params, dai);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* The glue will provide 1 lane out of the 4 to the output */
|
|
data = meson_codec_glue_input_get_data(dai);
|
|
data->params.channels_min = min_t(unsigned int, TOACODEC_OUT_CHMAX,
|
|
data->params.channels_min);
|
|
data->params.channels_max = min_t(unsigned int, TOACODEC_OUT_CHMAX,
|
|
data->params.channels_max);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops g12a_toacodec_input_ops = {
|
|
.hw_params = g12a_toacodec_input_hw_params,
|
|
.set_fmt = meson_codec_glue_input_set_fmt,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops g12a_toacodec_output_ops = {
|
|
.startup = meson_codec_glue_output_startup,
|
|
};
|
|
|
|
#define TOACODEC_STREAM(xname, xsuffix, xchmax) \
|
|
{ \
|
|
.stream_name = xname " " xsuffix, \
|
|
.channels_min = 1, \
|
|
.channels_max = (xchmax), \
|
|
.rate_min = 5512, \
|
|
.rate_max = 192000, \
|
|
.formats = AXG_TDM_FORMATS, \
|
|
}
|
|
|
|
#define TOACODEC_INPUT(xname, xid) { \
|
|
.name = xname, \
|
|
.id = (xid), \
|
|
.playback = TOACODEC_STREAM(xname, "Playback", 8), \
|
|
.ops = &g12a_toacodec_input_ops, \
|
|
.probe = meson_codec_glue_input_dai_probe, \
|
|
.remove = meson_codec_glue_input_dai_remove, \
|
|
}
|
|
|
|
#define TOACODEC_OUTPUT(xname, xid) { \
|
|
.name = xname, \
|
|
.id = (xid), \
|
|
.capture = TOACODEC_STREAM(xname, "Capture", TOACODEC_OUT_CHMAX), \
|
|
.ops = &g12a_toacodec_output_ops, \
|
|
}
|
|
|
|
static struct snd_soc_dai_driver g12a_toacodec_dai_drv[] = {
|
|
TOACODEC_INPUT("IN A", TOACODEC_IN_A),
|
|
TOACODEC_INPUT("IN B", TOACODEC_IN_B),
|
|
TOACODEC_INPUT("IN C", TOACODEC_IN_C),
|
|
TOACODEC_OUTPUT("OUT", TOACODEC_OUT),
|
|
};
|
|
|
|
static int g12a_toacodec_component_probe(struct snd_soc_component *c)
|
|
{
|
|
/* Initialize the static clock parameters */
|
|
return snd_soc_component_write(c, TOACODEC_CTRL0,
|
|
CTRL0_BLK_CAP_INV);
|
|
}
|
|
|
|
static int sm1_toacodec_component_probe(struct snd_soc_component *c)
|
|
{
|
|
/* Initialize the static clock parameters */
|
|
return snd_soc_component_write(c, TOACODEC_CTRL0,
|
|
CTRL0_BLK_CAP_INV_SM1);
|
|
}
|
|
|
|
static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
|
|
{ "SRC", "I2S A", "IN A Playback" },
|
|
{ "SRC", "I2S B", "IN B Playback" },
|
|
{ "SRC", "I2S C", "IN C Playback" },
|
|
{ "OUT EN", "Switch", "SRC" },
|
|
{ "OUT Capture", NULL, "OUT EN" },
|
|
};
|
|
|
|
static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
|
|
SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
|
|
SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
|
|
};
|
|
|
|
static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
|
|
.probe = g12a_toacodec_component_probe,
|
|
.controls = g12a_toacodec_controls,
|
|
.num_controls = ARRAY_SIZE(g12a_toacodec_controls),
|
|
.dapm_widgets = g12a_toacodec_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(g12a_toacodec_widgets),
|
|
.dapm_routes = g12a_toacodec_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
|
|
.endianness = 1,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
|
|
.probe = sm1_toacodec_component_probe,
|
|
.controls = sm1_toacodec_controls,
|
|
.num_controls = ARRAY_SIZE(sm1_toacodec_controls),
|
|
.dapm_widgets = sm1_toacodec_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(sm1_toacodec_widgets),
|
|
.dapm_routes = g12a_toacodec_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
|
|
.endianness = 1,
|
|
};
|
|
|
|
static const struct regmap_config g12a_toacodec_regmap_cfg = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static const struct g12a_toacodec_match_data g12a_toacodec_match_data = {
|
|
.component_drv = &g12a_toacodec_component_drv,
|
|
.field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 14, 15),
|
|
.field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 8, 9),
|
|
.field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 5),
|
|
};
|
|
|
|
static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
|
|
.component_drv = &sm1_toacodec_component_drv,
|
|
.field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 18, 19),
|
|
.field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
|
|
.field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
|
|
};
|
|
|
|
static const struct of_device_id g12a_toacodec_of_match[] = {
|
|
{
|
|
.compatible = "amlogic,g12a-toacodec",
|
|
.data = &g12a_toacodec_match_data,
|
|
},
|
|
{
|
|
.compatible = "amlogic,sm1-toacodec",
|
|
.data = &sm1_toacodec_match_data,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
|
|
|
|
static int g12a_toacodec_probe(struct platform_device *pdev)
|
|
{
|
|
const struct g12a_toacodec_match_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
struct g12a_toacodec *priv;
|
|
void __iomem *regs;
|
|
struct regmap *map;
|
|
int ret;
|
|
|
|
data = device_get_match_data(dev);
|
|
if (!data) {
|
|
dev_err(dev, "failed to match device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = device_reset(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
map = devm_regmap_init_mmio(dev, regs, &g12a_toacodec_regmap_cfg);
|
|
if (IS_ERR(map)) {
|
|
dev_err(dev, "failed to init regmap: %ld\n",
|
|
PTR_ERR(map));
|
|
return PTR_ERR(map);
|
|
}
|
|
|
|
priv->field_dat_sel = devm_regmap_field_alloc(dev, map, data->field_dat_sel);
|
|
if (IS_ERR(priv->field_dat_sel))
|
|
return PTR_ERR(priv->field_dat_sel);
|
|
|
|
priv->field_lrclk_sel = devm_regmap_field_alloc(dev, map, data->field_lrclk_sel);
|
|
if (IS_ERR(priv->field_lrclk_sel))
|
|
return PTR_ERR(priv->field_lrclk_sel);
|
|
|
|
priv->field_bclk_sel = devm_regmap_field_alloc(dev, map, data->field_bclk_sel);
|
|
if (IS_ERR(priv->field_bclk_sel))
|
|
return PTR_ERR(priv->field_bclk_sel);
|
|
|
|
return devm_snd_soc_register_component(dev,
|
|
data->component_drv, g12a_toacodec_dai_drv,
|
|
ARRAY_SIZE(g12a_toacodec_dai_drv));
|
|
}
|
|
|
|
static struct platform_driver g12a_toacodec_pdrv = {
|
|
.driver = {
|
|
.name = G12A_TOACODEC_DRV_NAME,
|
|
.of_match_table = g12a_toacodec_of_match,
|
|
},
|
|
.probe = g12a_toacodec_probe,
|
|
};
|
|
module_platform_driver(g12a_toacodec_pdrv);
|
|
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_DESCRIPTION("Amlogic G12a To Internal DAC Codec Driver");
|
|
MODULE_LICENSE("GPL v2");
|