233 lines
7.2 KiB
YAML
233 lines
7.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
|
|
|
|
maintainers:
|
|
- Liu Ying <victor.liu@nxp.com>
|
|
|
|
description: |
|
|
i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
|
|
sitting together with the PHYs. It is not the same as the MSI bus coming
|
|
from i.MX8 System Controller Unit (SCU) which is used to control power,
|
|
clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
|
|
|
|
i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
|
|
that is, MSI clock and AHB clock, need to be enabled so that peripherals
|
|
connected to the bus can be accessed. Also, the bus is part of a power
|
|
domain. The power domain needs to be enabled before the peripherals can
|
|
be accessed.
|
|
|
|
Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
|
|
like I2C controller, PWM controller, MIPI DSI controller and Control and
|
|
Status Registers (CSR) module, are accessed through the bus.
|
|
|
|
The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
|
|
pixel link MSI bus controller and does not allow SCFW user to control it.
|
|
So, the controller's registers cannot be accessed by SCFW user. Hence,
|
|
the interrupts generated by the controller don't make any sense from SCFW
|
|
user's point of view.
|
|
|
|
allOf:
|
|
- $ref: simple-pm-bus.yaml#
|
|
|
|
# We need a select here so we don't match all nodes with 'simple-pm-bus'.
|
|
select:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- fsl,imx8qxp-display-pixel-link-msi-bus
|
|
- fsl,imx8qm-display-pixel-link-msi-bus
|
|
required:
|
|
- compatible
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- fsl,imx8qxp-display-pixel-link-msi-bus
|
|
- fsl,imx8qm-display-pixel-link-msi-bus
|
|
- const: simple-pm-bus
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: master gated clock from system
|
|
- description: AHB clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: msi
|
|
- const: ahb
|
|
|
|
patternProperties:
|
|
"^.*@[0-9a-f]+$":
|
|
description: Devices attached to the bus
|
|
type: object
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- reg
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- power-domains
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/imx8-lpcg.h>
|
|
#include <dt-bindings/firmware/imx/rsrc.h>
|
|
bus@56200000 {
|
|
compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
|
|
reg = <0x56200000 0x20000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&dc0_irqsteer>;
|
|
interrupts = <320>;
|
|
ranges;
|
|
clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
|
|
<&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
|
|
clock-names = "msi", "ahb";
|
|
power-domains = <&pd IMX_SC_R_DC_0>;
|
|
|
|
syscon@56221000 {
|
|
compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
|
|
reg = <0x56221000 0x1000>;
|
|
clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
|
|
clock-names = "ipg";
|
|
|
|
pxl2dpi {
|
|
compatible = "fsl,imx8qxp-pxl2dpi";
|
|
fsl,sc-resource = <IMX_SC_R_MIPI_0>;
|
|
power-domains = <&pd IMX_SC_R_MIPI_0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
|
|
};
|
|
|
|
mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
|
|
};
|
|
|
|
mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ldb {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8qxp-ldb";
|
|
clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
|
|
<&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
|
|
clock-names = "pixel", "bypass";
|
|
power-domains = <&pd IMX_SC_R_LVDS_0>;
|
|
|
|
channel@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
phys = <&mipi_lvds_0_phy>;
|
|
phy-names = "lvds_phy";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
|
|
remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
/* ... */
|
|
};
|
|
};
|
|
|
|
channel@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
phys = <&mipi_lvds_0_phy>;
|
|
phy-names = "lvds_phy";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
|
|
remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
/* ... */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
clock-controller@56223004 {
|
|
compatible = "fsl,imx8qxp-lpcg";
|
|
reg = <0x56223004 0x4>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mipi_lvds_0_ipg_clk>;
|
|
clock-indices = <IMX_LPCG_CLK_4>;
|
|
clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
|
|
power-domains = <&pd IMX_SC_R_MIPI_0>;
|
|
};
|
|
|
|
phy@56228300 {
|
|
compatible = "fsl,imx8qxp-mipi-dphy";
|
|
reg = <0x56228300 0x100>;
|
|
clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
|
|
clock-names = "phy_ref";
|
|
#phy-cells = <0>;
|
|
fsl,syscon = <&mipi_lvds_0_csr>;
|
|
power-domains = <&pd IMX_SC_R_MIPI_0>;
|
|
};
|
|
};
|