175 lines
4.3 KiB
YAML
175 lines
4.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Toshiba TC358767 eDP bridge
|
|
|
|
maintainers:
|
|
- Andrey Gusakov <andrey.gusakov@cogentembedded.com>
|
|
|
|
description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
|
|
|
|
properties:
|
|
compatible:
|
|
const: toshiba,tc358767
|
|
|
|
reg:
|
|
enum:
|
|
- 0x68
|
|
- 0x0f
|
|
description: |
|
|
i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
|
|
|
|
clock-names:
|
|
const: "ref"
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
description: |
|
|
OF device-tree clock specification for refclk input. The reference.
|
|
clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
|
|
|
|
shutdown-gpios:
|
|
maxItems: 1
|
|
description: |
|
|
OF device-tree gpio specification for SD pin(active high shutdown input)
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: |
|
|
OF device-tree gpio specification for RSTX pin(active low system reset)
|
|
|
|
toshiba,hpd-pin:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum:
|
|
- 0
|
|
- 1
|
|
description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
unevaluatedProperties: false
|
|
description: |
|
|
DSI input port. The remote endpoint phandle should be a
|
|
reference to a valid DSI output endpoint node
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
description: array of physical DSI data lane indexes.
|
|
minItems: 1
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
DPI input/output port. The remote endpoint phandle should be a
|
|
reference to a valid DPI output or input endpoint node.
|
|
|
|
port@2:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
eDP/DP output port. The remote endpoint phandle should be a
|
|
reference to a valid eDP panel input endpoint node. This port is
|
|
optional, treated as DP panel if not defined
|
|
|
|
oneOf:
|
|
- required:
|
|
- port@0
|
|
- required:
|
|
- port@1
|
|
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clock-names
|
|
- clocks
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/* DPI input and eDP output */
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp-bridge@68 {
|
|
compatible = "toshiba,tc358767";
|
|
reg = <0x68>;
|
|
shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
|
|
clock-names = "ref";
|
|
clocks = <&edp_refclk>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
bridge_in_0: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
bridge_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
- |
|
|
/* DPI input and DP output */
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp-bridge@68 {
|
|
compatible = "toshiba,tc358767";
|
|
reg = <0x68>;
|
|
shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
|
|
clock-names = "ref";
|
|
clocks = <&edp_refclk>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
bridge_in_1: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|