159 lines
3.7 KiB
YAML
159 lines
3.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NVIDIA Tegra Display Serial Interface
|
|
|
|
maintainers:
|
|
- Thierry Reding <thierry.reding@gmail.com>
|
|
- Jon Hunter <jonathanh@nvidia.com>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- nvidia,tegra20-dsi
|
|
- nvidia,tegra30-dsi
|
|
- nvidia,tegra114-dsi
|
|
- nvidia,tegra124-dsi
|
|
- nvidia,tegra210-dsi
|
|
- nvidia,tegra186-dsi
|
|
|
|
- items:
|
|
- const: nvidia,tegra132-dsi
|
|
- const: nvidia,tegra124-dsi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
minItems: 2
|
|
maxItems: 3
|
|
|
|
clock-names:
|
|
minItems: 2
|
|
maxItems: 3
|
|
|
|
resets:
|
|
items:
|
|
- description: module reset
|
|
|
|
reset-names:
|
|
items:
|
|
- const: dsi
|
|
|
|
operating-points-v2: true
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
avdd-dsi-csi-supply:
|
|
description: phandle of a supply that powers the DSI controller
|
|
|
|
nvidia,mipi-calibrate:
|
|
description: Should contain a phandle and a specifier specifying
|
|
which pads are used by this DSI output and need to be
|
|
calibrated. See nvidia,tegra114-mipi.yaml for details.
|
|
$ref: "/schemas/types.yaml#/definitions/phandle-array"
|
|
|
|
nvidia,ddc-i2c-bus:
|
|
description: phandle of an I2C controller used for DDC EDID
|
|
probing
|
|
$ref: "/schemas/types.yaml#/definitions/phandle"
|
|
|
|
nvidia,hpd-gpio:
|
|
description: specifies a GPIO used for hotplug detection
|
|
maxItems: 1
|
|
|
|
nvidia,edid:
|
|
description: supplies a binary EDID blob
|
|
$ref: "/schemas/types.yaml#/definitions/uint8-array"
|
|
|
|
nvidia,panel:
|
|
description: phandle of a display panel
|
|
$ref: "/schemas/types.yaml#/definitions/phandle"
|
|
|
|
nvidia,ganged-mode:
|
|
description: contains a phandle to a second DSI controller to
|
|
gang up with in order to support up to 8 data lanes
|
|
$ref: "/schemas/types.yaml#/definitions/phandle"
|
|
|
|
allOf:
|
|
- $ref: "../dsi-controller.yaml#"
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- nvidia,tegra20-dsi
|
|
- nvidia,tegra30-dsi
|
|
then:
|
|
properties:
|
|
clocks:
|
|
items:
|
|
- description: DSI module clock
|
|
- description: input for the pixel clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: dsi
|
|
- const: parent
|
|
else:
|
|
properties:
|
|
clocks:
|
|
items:
|
|
- description: DSI module clock
|
|
- description: low-power module clock
|
|
- description: input for the pixel clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: dsi
|
|
- const: lp
|
|
- const: parent
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: nvidia,tegra186-dsi
|
|
then:
|
|
required:
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- resets
|
|
- reset-names
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/tegra186-clock.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/tegra186-powergate.h>
|
|
#include <dt-bindings/reset/tegra186-reset.h>
|
|
|
|
dsi@15300000 {
|
|
compatible = "nvidia,tegra186-dsi";
|
|
reg = <0x15300000 0x10000>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&bpmp TEGRA186_CLK_DSI>,
|
|
<&bpmp TEGRA186_CLK_DSIA_LP>,
|
|
<&bpmp TEGRA186_CLK_PLLD>;
|
|
clock-names = "dsi", "lp", "parent";
|
|
resets = <&bpmp TEGRA186_RESET_DSI>;
|
|
reset-names = "dsi";
|
|
|
|
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
|
|
};
|