100 lines
2.9 KiB
YAML
100 lines
2.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Ingenic SoCs DMA Controller
|
|
|
|
maintainers:
|
|
- Paul Cercueil <paul@crapouillou.net>
|
|
|
|
allOf:
|
|
- $ref: dma-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- ingenic,jz4740-dma
|
|
- ingenic,jz4725b-dma
|
|
- ingenic,jz4755-dma
|
|
- ingenic,jz4760-dma
|
|
- ingenic,jz4760-bdma
|
|
- ingenic,jz4760-mdma
|
|
- ingenic,jz4760b-dma
|
|
- ingenic,jz4760b-bdma
|
|
- ingenic,jz4760b-mdma
|
|
- ingenic,jz4770-dma
|
|
- ingenic,jz4780-dma
|
|
- ingenic,x1000-dma
|
|
- ingenic,x1830-dma
|
|
- items:
|
|
- const: ingenic,jz4770-bdma
|
|
- const: ingenic,jz4760b-bdma
|
|
|
|
reg:
|
|
items:
|
|
- description: Channel-specific registers
|
|
- description: System control registers
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
"#dma-cells":
|
|
enum: [2, 3]
|
|
description: >
|
|
DMA clients must use the format described in dma.txt, giving a phandle
|
|
to the DMA controller plus the following integer cells:
|
|
|
|
- Request type: The DMA request type specifies the device endpoint that
|
|
will be the source or destination of the DMA transfer.
|
|
If "#dma-cells" is 2, the request type is a single cell, and the
|
|
direction will be unidirectional (either RX or TX but not both).
|
|
If "#dma-cells" is 3, the request type has two cells; the first
|
|
one corresponds to the host to device direction (TX), the second one
|
|
corresponds to the device to host direction (RX). The DMA channel is
|
|
then bidirectional.
|
|
|
|
- Channel: If set to 0xffffffff, any available channel will be allocated
|
|
for the client. Otherwise, the exact channel specified will be used.
|
|
The channel should be reserved on the DMA controller using the
|
|
ingenic,reserved-channels property.
|
|
|
|
ingenic,reserved-channels:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: >
|
|
Bitmask of channels to reserve for devices that need a specific
|
|
channel. These channels will only be assigned when explicitely
|
|
requested by a client. The primary use for this is channels 0 and
|
|
1, which can be configured to have special behaviour for NAND/BCH
|
|
when using programmable firmware.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
|
|
dma: dma-controller@13420000 {
|
|
compatible = "ingenic,jz4780-dma";
|
|
reg = <0x13420000 0x400>, <0x13421000 0x40>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <10>;
|
|
|
|
clocks = <&cgu JZ4780_CLK_PDMA>;
|
|
|
|
#dma-cells = <2>;
|
|
|
|
ingenic,reserved-channels = <0x3>;
|
|
};
|