65 lines
1.4 KiB
YAML
65 lines
1.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Common GPIO lines
|
|
|
|
maintainers:
|
|
- Bartosz Golaszewski <brgl@bgdev.pl>
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
description:
|
|
Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
|
|
using inverted signal (e.g. RESETN).
|
|
|
|
select: true
|
|
|
|
properties:
|
|
enable-gpios:
|
|
maxItems: 1
|
|
description:
|
|
GPIO connected to the enable control pin.
|
|
|
|
reset-gpios:
|
|
description:
|
|
GPIO (or GPIOs for power sequence) connected to the device reset pin
|
|
(e.g. RESET or RESETN).
|
|
|
|
powerdown-gpios:
|
|
maxItems: 1
|
|
description:
|
|
GPIO connected to the power down pin (hardware power down or power cut,
|
|
e.g. PD or PWDN).
|
|
|
|
pwdn-gpios:
|
|
maxItems: 1
|
|
description: Use powerdown-gpios
|
|
deprecated: true
|
|
|
|
wakeup-gpios:
|
|
maxItems: 1
|
|
description:
|
|
GPIO connected to the pin waking up the device from suspend or other
|
|
power-saving modes.
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- mmc-pwrseq-simple
|
|
then:
|
|
properties:
|
|
reset-gpios:
|
|
minItems: 1
|
|
maxItems: 32
|
|
else:
|
|
properties:
|
|
reset-gpios:
|
|
maxItems: 1
|
|
|
|
additionalProperties: true
|