100 lines
2.5 KiB
YAML
100 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Lantiq SoC Serial To Parallel (STP) GPIO controller
|
|
|
|
description: |
|
|
The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
|
|
peripheral controller used to drive external shift register cascades. At most
|
|
3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
|
|
and Ethernet PHYs to drive some bytes of the cascade automatically.
|
|
|
|
maintainers:
|
|
- John Crispin <john@phrozen.org>
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^gpio@[0-9a-f]+$"
|
|
|
|
compatible:
|
|
const: lantiq,gpio-stp-xway
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
gpio-controller: true
|
|
|
|
"#gpio-cells":
|
|
description:
|
|
The first cell is the pin number and the second cell is used to specify
|
|
consumer flags.
|
|
const: 2
|
|
|
|
lantiq,shadow:
|
|
description:
|
|
The default value that we shall assume as already set on the
|
|
shift register cascade.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0x000000
|
|
maximum: 0xffffff
|
|
|
|
lantiq,groups:
|
|
description:
|
|
Set the 3 bit mask to select which of the 3 groups are enabled
|
|
in the shift register cascade.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0x0
|
|
maximum: 0x7
|
|
|
|
lantiq,dsl:
|
|
description:
|
|
The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
|
|
property can enable this feature.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0x0
|
|
maximum: 0x3
|
|
|
|
lantiq,rising:
|
|
description:
|
|
Use rising instead of falling edge for the shift register.
|
|
type: boolean
|
|
|
|
patternProperties:
|
|
"^lantiq,phy[1-4]$":
|
|
description:
|
|
The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
|
|
phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0x0
|
|
maximum: 0x7
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
gpio@e100bb0 {
|
|
compatible = "lantiq,gpio-stp-xway";
|
|
reg = <0xE100BB0 0x40>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
pinctrl-0 = <&stp_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
lantiq,shadow = <0xffffff>;
|
|
lantiq,groups = <0x7>;
|
|
lantiq,dsl = <0x3>;
|
|
lantiq,phy1 = <0x7>;
|
|
lantiq,phy2 = <0x7>;
|
|
};
|
|
...
|