113 lines
2.7 KiB
YAML
113 lines
2.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: UniPhier GPIO controller
|
|
|
|
maintainers:
|
|
- Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^gpio@[0-9a-f]+$"
|
|
|
|
compatible:
|
|
const: socionext,uniphier-gpio
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
gpio-controller: true
|
|
|
|
"#gpio-cells":
|
|
const: 2
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
description: |
|
|
The first cell defines the interrupt number.
|
|
The second cell bits[3:0] is used to specify trigger type as follows:
|
|
1 = low-to-high edge triggered
|
|
2 = high-to-low edge triggered
|
|
4 = active high level-sensitive
|
|
8 = active low level-sensitive
|
|
Valid combinations are 1, 2, 3, 4, 8.
|
|
const: 2
|
|
|
|
ngpios:
|
|
minimum: 0
|
|
maximum: 512
|
|
|
|
gpio-ranges: true
|
|
|
|
gpio-ranges-group-names: true
|
|
|
|
socionext,interrupt-ranges:
|
|
description: |
|
|
Specifies an interrupt number mapping between this GPIO controller and
|
|
its interrupt parent, in the form of arbitrary number of
|
|
<child-interrupt-base parent-interrupt-base length> triplets.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
|
|
|
patternProperties:
|
|
"^.+-hog(-[0-9]+)?$":
|
|
type: object
|
|
properties:
|
|
gpio-hog: true
|
|
gpios: true
|
|
input: true
|
|
output-high: true
|
|
output-low: true
|
|
line-name: true
|
|
|
|
required:
|
|
- gpio-hog
|
|
- gpios
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
- interrupt-controller
|
|
- "#interrupt-cells"
|
|
- ngpios
|
|
- gpio-ranges
|
|
- socionext,interrupt-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/gpio/uniphier-gpio.h>
|
|
|
|
gpio: gpio@55000000 {
|
|
compatible = "socionext,uniphier-gpio";
|
|
reg = <0x55000000 0x200>;
|
|
interrupt-parent = <&aidet>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl 0 0 0>;
|
|
gpio-ranges-group-names = "gpio_range";
|
|
ngpios = <248>;
|
|
socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
|
|
};
|
|
|
|
// Consumer:
|
|
// Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
|
|
// document. Unfortunately, only the one's place is octal in the port
|
|
// numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
|
|
// UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
|
|
sdhci0_pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
|
|
};
|