104 lines
3.1 KiB
YAML
104 lines
3.1 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Pinctrl-based I2C Bus Mux
|
|
|
|
maintainers:
|
|
- Wolfram Sang <wsa@kernel.org>
|
|
|
|
description: |
|
|
This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
|
|
signals, and represents the pin multiplexing configuration using the pinctrl device tree
|
|
bindings.
|
|
|
|
+-----+ +-----+
|
|
| dev | | dev |
|
|
+------------------------+ +-----+ +-----+
|
|
| SoC | | |
|
|
| /----|------+--------+
|
|
| +---+ +------+ | child bus A, on first set of pins
|
|
| |I2C|---|Pinmux| |
|
|
| +---+ +------+ | child bus B, on second set of pins
|
|
| \----|------+--------+--------+
|
|
| | | | |
|
|
+------------------------+ +-----+ +-----+ +-----+
|
|
| dev | | dev | | dev |
|
|
+-----+ +-----+ +-----+
|
|
|
|
For each named state defined in the pinctrl-names property, an I2C child bus will be created.
|
|
I2C child bus numbers are assigned based on the index into the pinctrl-names property.
|
|
|
|
The only exception is that no bus will be created for a state named "idle". If such a state is
|
|
defined, it must be the last entry in pinctrl-names. For example:
|
|
|
|
pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
|
|
pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
|
|
pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
|
|
|
|
Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
|
|
programmed into hardware.
|
|
|
|
If an idle state is defined, whenever an access is not being made to a device on a child bus,
|
|
the idle pinctrl state will be programmed into hardware.
|
|
|
|
If an idle state is not defined, the most recently used pinctrl state will be left programmed
|
|
into hardware whenever no access is being made of a device on a child bus.
|
|
|
|
properties:
|
|
compatible:
|
|
const: i2c-mux-pinctrl
|
|
|
|
i2c-parent:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: The phandle of the I2C bus that this multiplexer's master-side port is connected
|
|
to.
|
|
|
|
allOf:
|
|
- $ref: i2c-mux.yaml
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- i2c-parent
|
|
|
|
examples:
|
|
- |
|
|
i2cmux {
|
|
compatible = "i2c-mux-pinctrl";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c-parent = <&i2c1>;
|
|
|
|
pinctrl-names = "ddc", "pta", "idle";
|
|
pinctrl-0 = <&state_i2cmux_ddc>;
|
|
pinctrl-1 = <&state_i2cmux_pta>;
|
|
pinctrl-2 = <&state_i2cmux_idle>;
|
|
|
|
i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
};
|